ABAP Webdynpro Table Control

Hi all,
I am a Webdynpro beginner, I am developing a ABAP Webdynpro program. I have a table in my View, And I want to the Row became READ ONLY based on the context.
For Example, there is a user name field in the table, if the user name is equal to the user who run the program, this row will be modifiable. if not, the row will be Read Only.
I don't know which function can do so. Could anyone help me?
I can use VIEW->GET_ELEMENT to get the table. but I didn't find the method in the CL_WD_TABLE helpful.
Thanks
Ming

For further description,
the table is binded to a ( 0 ... n ) context node. There are 6 columns in the table. 3 of them are textviews and the others are inputfield. I want two of the inputfields in each rows became Read_Pnly or not base on the value in the same row in a textview field.
For example, there are six column, col1 col2 col3 col4 col5 col6.
if col = 'MM'.
col1 col2 are editable.
else.
col1 col2 are read_only.
Thanks in advance.
Ming

Similar Messages

HR-ABAP using Table Control Wizard

My requirements is to customize an infotype which is customer specific.
After creating the infotype in PM01, I also create the screen(2000) for the
infotype. The issue is in the table control. I create a table control
using table control wizard, getting the information that i need to output in the
screen, using another infotype which is PA0007 planned working time.
The expected result is that the data will diplay on the screen when i execute PA30.
Do you have any idea or any recommendation to resolve the issue? thanks.
And here are my codes.
in PBO
LOOP AT   g_table5_itab
       INTO g_table5_wa
       WITH CONTROL table5
       CURSOR table5-current_line.
    MODULE table5_move.
    MODULE table5_get_lines.
ENDLOOP.
Inside the module pool.
MODULE TABLE5_INIT OUTPUT.
IF G_TABLE5_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'PA0007'
*&SPWIZARD: INTO INTERNAL TABLE 'g_TABLE5_itab'
    SELECT * FROM PA0007
       INTO CORRESPONDING FIELDS
       OF TABLE G_TABLE5_ITAB
*Start of Insert
       WHERE pernr = pskey-pernr.
*End of Insert      .
     G_TABLE5_COPIED = 'X'.
     REFRESH CONTROL 'TABLE5' FROM SCREEN '2000'.
ENDIF.
ENDMODULE.
MODULE TABLE5_MOVE OUTPUT.
*Start of Delete
MOVE-CORRESPONDING G_TABLE5_WA TO PA0007.
   MOVE-CORRESPONDING G_TABLE5_WA TO PA9201.
*End of Delete
*Start of Change
   MOVE G_TABLE5_WA-begda TO PA9201-zzpensda.
   MOVE G_TABLE5_WA-endda TO PA9201-zzpendda.
   MOVE G_TABLE5_WA-empct TO PA9201-zzempct.
*End of Change
ENDMODULE.
MODULE TABLE5_GET_LINES OUTPUT.
G_TABLE5_LINES = SY-LOOPC.
ENDMODULE.

Hi,
Create a table control in layout and place your fields in table control.
Press F6 and give the table name and click on get from dictionary and select the 5 fields which you required and palce those fields in table control.
Double click on table control and give table control name .
In Top include create a stmt as
CONTROLS : TABlecontrolname TYPE TABLEVIEW USING SCREEN '1000'.
In PBO under a module write your logic that means select query and place it in an internal table. Place that select query under IF condition.
Module Read.
If SY-UCOMM = 'ENTER'.
Process query.
endif.
endmodule.
LOOP AT ITAB INTO WA WITH CONTROL TAB.
    MODULE DISP.
    ENDLOOP.
In PAI.
   LOOP AT ITAB.
     ENDLOOP.
Here ITAB is internal table name.TAB is table control name.In display module write the code
MODULE DISP OUTPUT.
MOVE-CORRESPONDING WA TO database tablename.
ENDMODULE.
And in 1000 screen create SET PF status in the function keys assign a keyword to Enter Icon as 'ENTER'.
Hope this is helpful.
Regards,
G.Aditya

HR Abap - Reading table control for infotype 0416

Hi,
Infotype 416 'Create Time Quota Compensation' has a table control for 'Absence Quotas'.
I have to read this table control in user exit ZXPADU02.
Please assist in how to go about doing this.
Regards,
Warren.

Hi All,
I am using ZXPADU02.
The FM's suggested don't work because the user enters a compensation value at runtime and when user clicks 'save' I need to pick this value up. The FM's pick up existing absence records but I need the ones being created at runtime.

Abap WebDynpro: Table Maintenance Generator ??

...in ABAP Dictionary there is a tool for generating Table Maintenance for classical "Screen Painter" Dynpro. Is there (or will there ever be?) a similiar tool for generating Table Maintenance for WebDynpro ?

Have a look at [this|"Table Maintenance Generator" for WD4A?; thread - nothing new until now afaik.
Regards,
TW

ABAP WEBDYNPRO - Table Columns Buttons

Hi Experts.
I have a table and the last colum is a button.
I would like to know, how do I get the index when starts the event of button?
Tks a lot

hi
post your question in webdynpro ABAP forum.you'll get the solution there.
regards
Aakash Banga

Dynamic rows in ABAP webdynpro table

hi all
I've got a question. I have a webdynpro with a table.
This table is feed by a node. The number of rows of this node is dynamic.
I had seen in the properties of the table object that the number of visible rows can be set.
But is there also a method to set this number of rows dynamicly? So when the node has 20 rows
the table object is also set to show 20 rows and when there are none, the table
only shows the header of the table.
Currently the table always shows 5 rows, without checking how many rows there actually are.
Does any of you know how to do this?
kind regards,
Anton Pierhagen

Hi Anton ,
You can use the method SET_VISIBLE_ROW_COUNT() of the class cl_wd_table for setting the visible row count dynamically.
In the WDDOMODIFY view , you can get the reference of the table UI element used and proceed.
DATA lo_table TYPE cl_wd_table.
lo_table ?= view->get_element( ID = 'name_of_table_in_the_view').
lo_table->SET_VISIBLE_ROW_COUNT(value = 5)."Here the value you can decide based on your data.
But this method is not recommended as it directly deals with the view's elements and will be very difficult for the person maintaining the code.
Instead create a attribute which can store a number and bind the visible row count property to this attribute.
set this attribute with the values based on the data.(as in number of visible rows you would want to see.)
Thanks,
Aditya

ESS- ABAP Webdynpro- table column not visible

Hi,
We are using SAP travel management for expense approvals. In the package PTRM_WEB_UI, you will find the component FITE_VC_RECEIPTS. In the VIEW - RECEIPTS_VIEW you will find in the table that there is a column called "Short Info". However this column in not visible in the portal.
There is no personalization done to hide this column.
The visible property of this column is set to "visible".
In portal content directory if i right click....this column is not even available to be added/removed.
Please help me understand why this column in not visible and how can i make it appear in portal.
Thank You!

Any input?

ABAP Webdynpro table scroll bar does not work

Hello,
I have created a dynamic WD table using cl_wd_dynamic_tool=>create_table_from_node. I have set the no. of visible rows to 5. Now when ever the table has more rows, it displays a vertical scroll bar. But if I scroll it down, after 5 rows, it dosent scroll further. Am I missing something here?
Thanks and Regards,
Sandhya

Hi,
I guess you might have wriiten the code in the MODFIYVIEW right.
One thing you do....
Use the FIRST TIME parameter , create the tbale and all. When the application runs for 2nd time, then reset the vsible row count value.
Have you used any BIND_TABLE statement in this modfivyew.
Please clarify above.
Regards,
Lekha.

ABAP WebDynpro: Table cells with different values.

Hello,
I am not sure how the following can be achieved.
I have a table with 10 rows in it. First column should have different values in cells (static value that do not come from anywhere). For example, colors: black, green, yellow, etc.
I inserted a table column. In that column I inserted a Cell Editor of type TextView. If I define a 'text' property of this element than it marks all cells in this column with this text. I need to assign different values to each cell.
How can this be done?
Thank you.

Probably you should post this the Web Dynpro Forum
Web Dynpro Java
Regards,
Ravi
Note : Please close this thread.

How to get rid of vertical scroll bar in ABAP webdynpro table

Hello,
I have created a dynamic WD table using cl_wd_dynamic_tool=>create_table_from_node and then I restricted the number of lines to 1 by setting the 'Set_Row_Count' and 'Set_Visible_Row_Count' = 1. But still when I run the application I see a vertical scroll bar which looks very awkward for only 1 line. How do I get rid of this vertical scroll bar ?
Thanks and Regards,
Sandhya

Hi,
Is your table under any transparent container. have you set any scroll mode for this.
One more thing, have you used SER SCROLLABLE COL COUNT property.Also is this property set firstVisibleScrollableCol.
Regards,
Lekha.
Edited by: Lekha on Oct 28, 2009 11:18 AM

ABAP Webdynpro Rendering issues after ECC Upgrade

Dear All,
We recently upgraded ECC to EHP 7 (Netweaver 7.4) but our Portal is still at Netweaver 7.0 EHP2 SP16.
The ABAP Webdynpro iViews in Portal have the following issues. ( We use IE11).
1. The ABAP Webdynpro Table filtering is not working. When I click the filter button it does nothing.
2. The cursor in the Input fields reset back to the first position while typing and create a big mess.
Any help appreciated.
Thank you.
PK

Hi N_niki
There is no resolution as such.
We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
Hope this helps.
Thanks
Vinodh Sudhakaran

BDC Table Controler

hi friends,
Could u please tell me what BDC TABLE CONTROLER
in which cases we can use the bdc Table Contorler
Regards
srinu y

Hi srinu,
Check this link
http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Reward with points if it is helpful
Cheers
Alfred

BDC coding for TABLE controls

how to write BDC coding based on Table Controls...

http://www.sap-basis-abap.com/abap/handling-table-control-in-bdc.htm
How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
 LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
 or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
 LoopLine type i, " the number of lines occupied by one steploop item
 FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new " scrolling screen is empty, otherwise is 1
 Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
 pageno type i, " you need to scroll screen how many times.
 line type i, " number of lines appears on the screen.
 index(2) type N, " the screen index for certain item
 begin type i, " from parameter of loop
 end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
 LoopLine type i (see step 1)
 FirstLine type i (see step 2)
 DataLine type i ( this is the item number you will enter in transaction)
 changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
 changing line type i.(visible lines one the screen)
data: midd type i,
 vline type i, "visible lines
if DataLine eq 0.
 Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
 pageno = DataLine div vline.
 if pageno eq 0.
 pageno = pageno + 1.
 endif.
elseif FirstLine eq 1.
 pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
 midd = ( DataLine - 1 ) mod ( vline - 1).
 if midd = 0 and DataLine gt 1.
 pageno = pageno - 1.
 endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
 FirstLine type i(see step 2)
 LineIndex type i(item index)
 changing Index type n. (index on the screen)
if FirstLine = 0.
 index = LineIndex mod Line.
 if index = '00'.
 index = Line.
 endif.
elseif FirstLine = 1.
 index = LineIndex mod ( Line - 1 ).
 if ( index between 1 and 0 ) and LineIndex gt 1.
 index = index + Line - 1.
 endif.
 if Line = 2.
 index = index + Line - 1.
 endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
 DataLine type i
 FirstLine type i
 loopindex like sy-index
 changing begin type i
 end type i.
If FirstLine = 0.
 if loopindex = 1.
 begin = 1.
 if DataLine <= Line.
 end = DataLine.
 else.
 end = Line.
 endif.
 elseif loopindex gt 1.
 begin = Line * ( loopindex - 1 ) + 1.
 end = Line * loopindex.
 if end gt DataLine.
 end = DataLine.
 endif.
 endif.
elseif FirstLine = 1.
if loopindex = 1.
 begin = 1.
 if DataLine <= Line.
 end = DataLine.
 else.
 end = Line.
 endif.
elseif loop index gt 1.
 begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
 end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
 if end gt DataLine.
 end = DataLine.
 endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
 name2(14) value 'EKPO-MENGE(XX)',
 name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
 name2 to <quan>,
 name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
 perform calrange using Line DataLine FirstLine sy-index
 changing begin end.
loop at DataTable from begin to end.
 perform calindex using Line FirstLine DataTable-LineIndex changing Index.
 name1+11(2) = Index.
 name2+11(2) = Index.
 name3+12(2) = Index.
 perform bdcfield using <material> DataTable-matnr.
 perform bdcfield using <quan> DataTable-menge.
 perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Cheers
VJ

Error Handling in tables using ABap Webdynpro

Hi All,
I am new to this ABAP webdynpro programming. I have a small question. I am using a table control in one of my iview. I need to check some validations on some columns of this table. Let's say I have a table with 3 columns A,B and C.
Case 1 : Whenever any user enters values in C which is greater than A i want to raise an error message saying "The Value is greater than A". The user shouldn't be allowed to enter anyother inputs before correcting the same.
OR
Case 2: If the user enters 10 rows in the table and the 5th row contains the error. How can i highlight that row or field which contains the error.
Your inputs will be valuable to me.
Regards,
Pravesh.

Hi,
Get the elements of the node for which you table is bound.
Loop through the context element set.
get the record for that context attribute and check the column A and column B value and throw
the error using the report_error_element_message when there is error.
Check this sample code -
DATA:
 lt_attr_list type STRING_TABLE,
 ls_attr_list type string.
ls_attr_list = column name.
append ls_attr_list to lt_attr_list.
clear ls_attr_list.
ls_attr_list = column name.
append ls_attr_list to lt_attr_list.
clear ls_attr_list.
DATA: lit_elementset type WDR_CONTEXT_ELEMENT_SET,
lis_element type ref to IF_WD_CONTEXT_ELEMENT,
ls_data type <<strucure type>>.
 CALL METHOD <<nodename>>->GET_ELEMENTS
 RECEIVING
 SET = lit_elementset.
 LOOP AT lit_elementsetINTO lis_element.
lis_element->get_static_atributes->
importing = ls_data.
if ls_data-columnC GT ls-data-columnA.
lr_msg_manager->report_element_error_message->
message_text = 'Column C canot be gretaer than column A'
element = lis_element
attributes = lt_attr_list <<Populate the attributes table for which errors are to be shown>>
endif.
clear: ls_data, lis_element.
ENDLOOP.
Regards,
Lekha.

ABAP Webdynpro: Creating a table on webdynpro screen to enter new data.

Hello Experts,
Does anyone know, how to create a table on webdynpro screen that can be used to enter new data in database?
I have tried to create a Table UI element (with Standard Cell Editor as Input Field) but it is "Display only" if there is no data in the table. This means, while you can use it to modify the data if some data already exist, but you cannot use it to enter new data if no data already exist. What I am looking for is something similar to a Table Control (or Step-Loop) functionalty of a traditional (non webdynpro) SAP screen. How to achieve this in Webdynpro for ABAP?
Thanks in advance.
ABAPer

Even if no data is not there, you can pass blank work areas to table, so now table will blank rows where you can enter the data even if previous data is not there.
below is the sample code to get blank rows in table in order to enter data.
DATA LO_ND_N_EDUCATION1 TYPE REF TO IF_WD_CONTEXT_NODE.
DATA LO_EL_N_EDUCATION1 TYPE REF TO IF_WD_CONTEXT_ELEMENT.
DATA LS_N_EDUCATION1 TYPE WD_THIS->ELEMENT_N_EDUCATION1.
navigate from <CONTEXT> to <N_EDUCATION1> via lead selection
LO_ND_N_EDUCATION1 = WD_CONTEXT->GET_CHILD_NODE( NAME = WD_THIS->WDCTX_N_EDUCATION1 ).
DATA: ET_DATA TYPE WD_THIS->ELEMENTS_N_EDUCATION1,
EW_DATA TYPE WD_THIS->ELEMENT_N_EDUCATION1.
DO 10 TIMES.
APPEND EW_DATA TO ET_DATA.
ENDDO.
get element via lead selection
LO_EL_N_EDUCATION1 = LO_ND_N_EDUCATION1->GET_ELEMENT( ).
LO_ND_N_EDUCATION1->BIND_TABLE( NEW_ITEMS = ET_DATA SET_INITIAL_ELEMENTS = ABAP_FALSE ).
now table will have 10 rows, here node name is N_education1.
Thanks and REgards
Srinivas

ABAP Webdynpro Table Control

Similar Messages

Maybe you are looking for