Customer purchase order date allow 01.01.0511 in sales order ??

Hello All,
In sales order,Customer purchase order date (filed name BSTDK) 01.01.0511 was maintained.
the date format 01.01.0511 will allowing in this field in SAP in teh slaes order.
or this is typo error.??
VBKD-BSTDK is having DATS data type.
rec
if we use same date 01.01.0511 on the POs, system will give error message
"Delivery date outside period covered by factory calender DE (DE-germany) with message no:ME078".
so how to cor

Hello All,
In sales order,Customer purchase order date (filed name BSTDK) 01.01.0511 was maintained.
the date format 01.01.0511 will allowing in this field in SAP in teh slaes order.
or this is typo error.??
VBKD-BSTDK is having DATS data type.
if we use same date 01.01.0511 on the POs, system will give error message
"Delivery date outside period covered by factory calender DE (DE-germany) with message no:ME078".
so how to correct the date 01.01.0511 in VBKD-BSTDK ??

Similar Messages

Fix Date & Qty Field in Schedule Lines Sales Order

Dear Friends,
I want to understand the need and use of the Fix Date & Qty field check in the sales order -> Item -> Schedule Lines.
Can anybody explain me the need of the same.
Regards,
Harsh

If the availability check for an item determines that the item cannot be delivered fully on the requested delivery date, and, as a result one or more schedule lines have to be created for later delivery dates, the customer can decide whether to accept these delivery dates and quantities.
You can record the customer's decision either by setting an indicator in the Fixed date and qty field or by leaving this field blank. The field is displayed both on the schedule line overview screen and on the availability screen.
<b>Customer Accepts the Schedule Line Proposal</b>
If the customer accepts the schedule lines which are proposed by the system, mark the Fixed date and qty field. The system then transfers the requirements for the schedule lines to material requirements planning.
<b>Customer Requires Goods Earlier</b>
If the customer requires the goods earlier than the date that the system can confirm after the availability check, leave the Fixed date and qty field blank. The system then only passes on the requirements for the requested delivery date and does not take the quantities and dates confirmed by the system after the availability check into account. In this case, it is assumed that the requested delivery date can be kept to because, for example, additional production capacity may become free. The system only confirms the sales order once the entire order quantity can be delivered on the requested delivery date. In the subsequent delivery processing, the sales order is only considered to be completed when the entire order quantity has been delivered or when all partial delivery agreements have been fulfilled.
A fixed item is considered to be completed once the entire confirmed quantity (which can be smaller than the originally requested order quantity)has been delivered. Therefore, it does not make sense to fix the confirmed quantity to 0 as the item is considered to be completed from the start.
During rescheduling, the fixed quantities and dates are no longer taken into account.
The same info u can get easily from help.sap.com
Message was edited by:
sam masker

Hii purchase infor record when creating PR from a sales order

Hii
I have found an exit USEREXIT_MOVE_FIELD_TO_ME_REQ when creating a sales order i can modify the table EBAN
there is a special flow where i need to remove clear out the Purchase info record (INFNR) since when creating a sales order the purchase determine his own vendor thus i have an error message which is trggered since the vendor of purchase infor record is different from the sales order vendor.
can you please advise what is the impact of deleting the INFNR data during the creating of sales order. Seems to me that the purchase requisition is not created automatically in this case?

Hi,
IN ECC 6.0 EHP 4, it gets copied from PR to PO but not in lower versions.
Hence you can achieve the same using some PO BADI's or through enhancement spots.
Thanks & Regards,

Put Purchase Orders checkbox in the first Tab in sales order window

How do I use UI SDK to put the Purchase Orders checkbox in the first tab in sales order window?

I want to enable the checkbox during form load, therefore I include the following codes:
Case SAPbouiCOM.BoEventTypes.et_FORM_LOAD
                    '// Specifies that SAP Business One application opened a form.
                    Try
                        SBO_Application.Forms.Item(FormUID).Items.Item("104").Click(SAPbouiCOM.BoCellClickType.ct_Regular)
                    Catch ex As Exception
                        SBO_Application.MessageBox(ex.Message)
                    End Try
But it doesn't work.

PR00 need to be allowed at once in the sales order

Dear All,
My requirement is PR00 condition type need to allowed at once in the sales order.
For Example:- PR00 maintained already in the sales order when the user try to enter PR00 once again system should not allow
Is there any User exit available for this check
Please reply ASAP
Note: PR00 will be entered manually also
Regards,
Murali.

Hi,
Write the code in the user exit USEREXIT_PRICING_PREPARE_TKOMK for header andUSEREXIT_PRICING_PREPARE_TKOMP
for item in the program MV45AFZZ for not allowing the user to create duplicate condition records in SALE ORDER.
regards,
santosh

Sales order with reference to Contract and another sales order

Hi Gurus,
I would like your suggestions on one of the business requirement i have.
We are creating a new EDI interface with few of our customers to create sales orders. While creating sales orders, it should validate if there are any open contracts available and if yes, then the sales order should be created with reference to it. so far good but there are chances that sold to party on the contract could be different from sold to party on the EDI order sent by customer (customer can have more than one sold to party on their system). IDOC's are failing in this scenario and not able to create a sales order since sold to partys are not matching. I need your help.
Can we do some thing in customer master to handle this scenario?
or
Create a new sales doc type (YEDI or some thing) and create sales order from IDOC without reference to contract. Business will look into all YEDI order and create the actual sales order out of it but the challenge here is i cannot refer contract to the actual sales order or YEDI order.
Is it possible to create sales order with ref to a contract and another sales order?
Please help
Thanks
Venkat

Hello Venkat
What is the linkage between sold to party of contract and sold to party of order..If customer has more than one sold to party.
Why don't you use customer hierarchy....link all sold to party of a customer to hierarchy node.for example...you create a hierarchy node 1000 and assigned customers 2000 and 3000 to it.you have contract for 2000..so when you create a sales order for 3000 check in knvh table it's customer hierarchy 1000 and get all sold tos assigned to hierarchy...which is 2000....check if contract exist for sold to's..If yes then create order with reference.
Let us know if it works for you.
Thanks
Amit Gupta

How to identify Sale Order costing is required for Items in Sales Order

Howstandard cos estimate*w to identify Sale Order costing is required for Items in Sales Order?
On which criteria we can conclude Sale Order Costing is reqd ?
? * means what and wat is the purpose and how to chk for the Item in Sales Order, either it is required or not**.

Hi Dharamveer,
The best way is to make the order qty is equal to the quantity delivered. This way, when some one looks at this order in future - they think that the order was for X and the delivery was for X qty is completed. They will not know the background of the issue unless they go through change log. Even in change log, they see that the Ord qty was adjusted, but may not understand why?
The good practice is to make order qty equal to already delivered qty.
Create a new line for the remaining qty and reject the same with appropriate reason for rejection. This way, any one can understand the background , the reason for rejection easily. Hope it helps !

Need to add a custom defined partner at the time of creation of sales order

Hi Experts,
I request you some solution for me in this urgent requirement.
Scenario 1:
I have to create a partner in the sales order based on some validations with repect to bill-to party and ship-to party. The validations if success, will return me the data from an 'Z' function module which i need to populate to the new partner that will be created in the sales order.
I am using the program MV45AFZZ and the userexit USEREXIT_SAVE_DOCUMENT_PREPARE.
Now after getting the data for the new partner to be added, i have done this code..
      LOOP AT ws_dealer.
        xvbpa-kunnr = ws_dealer-kunwe.
        xvbpa-parvw = 'ZD'.
        xvbadr-telx1 = ws_dealer-primaryid.
        xvbadr-name1 = ws_dealer-physname.
        xvbadr-stras = ws_dealer-physstreet.
        xvbadr-ort01 = ws_dealer-physcity..
        xvbadr-regio = ws_dealer-physstate.
        xvbadr-pstlz = ws_dealer-postalcode.
        xvbadr-land1 = ws_dealer-ctrycode.
        xvbadr-telf1 = ws_dealer-phone.
        xvbadr-telf2 = ws_dealer-fax.
       xvbadr- = ws_dealer-email.
        xvbadr-telbx = ws_dealer-distance.
        APPEND xvbadr.
        APPEND xvbpa.
      ENDLOOP.
Now i'm getting the new partner number in the partners tab in sales order, but the new address details are not getting updated and the ship-to party address is only appearing in the screen.
Also i'm finding difficulty in updating the telex, email information in the sales order.
Scenario 2:
There are cases where some sales orders are getting created through an idoc. In that case, i have to populate the values from idoc especially the address details of all the partners to the screen and update the sales order.
Apart from populating value to all the partners, the process of scenario 1 will have to be carried again to create the 'Z' partner (if validation is successful).
For this case, i do not know which userexit i need to use. and how to go about this..
This is having a very tight deadline and it is extremely urgent for me.
Please help with your valauble answers.
Your help would certainly be appreciated and rewarded.
Thanks,
Ananth

Hi Mahulenka,
Thanks for your reply. I do not want the data from the customer master.
The partner data will come in the idoc and i wish to put the data in the sales order based on some validation for the standard partners like WE/AG/RE/RG.
The client has developed some 'Z' function module which contains the functionality of SAP FM - IDOC_INPUT_ORDERS.
Now for the partner which i'm creating 'ZD' i believe i should update the indicator UPDKZ to 'I' for XVBADR table as it is a new record. Why should i update in XVBAP table and i'm adding only partner and his address details. Also i think all this change i should put in USEREXIT_SAVE_DOCUMENT at the point of saving.
Please advise.
Thanks,
Ananth

No batch input data for screen SAPMSSY3 0131 in Sales order IDOC

I am processing Sales order IDOCS in status 64 using RBDAPP01 .Some of them error out to status 51 with the message -
No batch input data for screen SAPMSSY3 0131 .
I know the standard IDOC inbound process tries to simulate the posting in a BDC like process.
Now, I went to we19 and the screen hangs up in a pop up in the partners tab with partner type 'WE' and my shipto (which is actually filled in the IDOC), missing..upon repeatedly hitting enter, it goes thru and an idoc is posted in status 53. But still unable to get through the root of this issue.
Any, insight will help.

Hi,
I think the pop-up is generated through and user-exit for which recording is missing. This is why your idoc stays in status 64...
Handle the screen recording in the user exit IDOC_INPUT_ORDERS
user exit routine
PERFORM customer_function_dynpro.
FORM CUSTOMER_FUNCTION_DYNPRO.
CALL CUSTOMER-FUNCTION '002'
    EXPORTING DXVBAK   = XVBAK
              DVTCOMAG = VTCOMAG
              DLAST_DYNPRO = LAST_DYNPRO
              DXMESCOD = IDOC_CONTRL-MESCOD
    TABLES    DXBDCDATA = BDCDATA
              DXVBAP    = XVBAP
              DXVBEP    = XVBEP
              DYVBEP    = YVBEP
              DXVBADR   = XVBADR
              DYVBADR   = YVBADR
              DXVBPA    = XVBPA
              DXVBUV    = XVBUV
              DIDOC_DATA = IDOC_DATA
              DXKOMV    = XKOMV
              DXVEKP    = XVEKP
              DYVEKP    = YVEKP
    EXCEPTIONS
              USER_ERROR = 01.
Regards,
Krishnakumar

Sending New Requirement date to APO before saving the sales order in ECC

Hi Experts,
i have a requirement where while creation of sales order, when user enters the requirement date,i have to calculate the new requirement date ( adding transit time and other time ) and send it to APO , to bring the ATP result based on this new calculated date.
This new calculated date is getting saved in Z field in VBAP table and also this new requirement date which has to be pass to APO is getting calculated while saving the doucment i.e. at user exit - USEREXIT_SAVE_DOCUMENT_PREPARE.
Now, i am not sure, how i should pass this new date to APO , which FM , Badi or BAPI would be used ?
Please help and let me know if i am supposed to detailed it a little more.
Thanks.

Hi Bharat,
Normally the new calculated requirement/delivery date will be updated in APO through the CIF.
However you can influence the transfer with enhancement CIFSLS03 (influence sales-order-specific data directly before it is sent to SAP APO available on ECC side).
Please see the below description.
Thanks.
Regards, Marius
In this enhancement, you can transfer customer-order-specific data to SAP
APO.
The associated component EXIT_SAPLCSLS_002 provides you with tables that are
required for the transfer. In particular, these are:
Requirements table ET_SL_REQ
Item table ET_SL_DOC
Field catalog ET_ATPFIELD
You can use this exit to create or change documents in the ERP system as well
as for the initial data transfer.
The data is transferred to SAP APO after this exit is called.
Notes
If you use program /SAPAPO/CIF_DELTAREPORT3, you have to add the
corresponding logic to function module EXIT_SAPLCID3_001. For more information,
see the documentation for
enhancement CIFCID3.
Programs /SAPAPO/CIF_DELTAREPORT and /SAPAPO/CIF_DELTAREPORT2 also run this
exit.

Customer material info records are not getting displayed in Sales order

Hi ,
We are upgrading our client sap system from ECC 5.0 to ECC 6.0 .We are now in the testing phase .An issue came up regarding customer material info records .
When we are creating a sales order using VA01, after entering Material number and order quantity for an item if we press the ordering party tab(before saving the sales order) the customer material info records (value in cutomer material number) are gettting displayed.But if we save the sales order we are not able to see the customer material info records.
kindly guide me in this issue .
Thanks in advance .
Nikhil

hi nikhil,
check the tick box in vov8 "read info record",and when you create sales order(va01),dont enter the material number enter the "customer material number" and see whether you are getting the material number.
and also go to (va02) and check whether you are getting the CMIR details.
pls explain me the problem in detail for my better understanding
regards
senya

Required delivery date not to be cpoied into sales order from quotation

My requirement is that required delivery date should not be copied when i create a sales order with reference to quotaion,
In the sales document types i have unchecked propose delivery date .it works fine while creating quotaion but then when i create sales order with ref to quotation the required delivery date is copied into the sales order which i dint want.
Kindly guide me on this

Hi,
I think if u dont want to copy only required delivery date from QT to OR you need to write the routine and has to assign in VTAA -Coping requirements.
if u assign 502 it ill not copy quantiy in schedule lines i think.
Just ask your ABAPer about 502 , if it work then assign the same to ur document types in VTAA.
Hope this will helps u
Regards,
Ramesh
Edited by: Ramesh on Mar 30, 2009 11:25 AM

How to pass delivery date through BAPI while creating a sale order

Dear frndz,
     I am using 'BAPI_SALESORDER_CREATEFROMDAT1'
to create a sale order .
    I don't have any problem..
    But I have to pass schedule line delivery date through this bapi .
   I used REQ_DATE in structure BAPISCHDL.
   But I can' t get it.
   Through which parameter can i meet this..
   The sale order should be created line item wise along with my delivery date..
Any suggestions...
regards.
siva

Dear frnd,
    Danq for your response..I can't use DLV_DATE for this requirement..
    But I used REQ_DATE in the structure BAPISCHEDULE .
   I came to know that the problem i faced previously was only
internal data conversion.
    Now am able to pass my delivery date..
    so I am closing the thread..
Regards.
siva

Purchase order on Hold is not working from Sales Order document

Hello gurus,
I'm detecting a problem that I have.
I have created a Sales Order and then, this document create a Purchase Requisition in automatic.
So, when I create the purchase order, adopting the purchase requisition, I want to save this as on Hold.
The problem is that the button "Hold" is missing.
But, if I create a purchase requisition and I register the sales order directly (account assignment "E") and then, I create the purchase order, adopting the purchase requisition, the button "Hold" is not missing.
I have active the BADI to Hold, but, it is only mention restrictions with Third Party and Services, not with Sales Order normal.
Could you help me please a.s.a.p.?
Regards,
Sandra Palomo

Application component: MM-PUR-PO-GUI
Function group: MEPO
The Business Add-In (BAdI) ME_HOLD_PO enables you to specify whether an
Enjoy purchase order can be put on hold or whether this function is to be
suppressed in accordance with your requirements.
In the standard system, this function is generally offered during the
creation of an Enjoy purchase order (transaction ME21N) and when a PO
that is on hold is changed (transaction ME22N).
Note
Enjoy purchase orders cannot be put on hold if any of the following
criteria apply:
o The PO contains service items
o The PO contains "third-party" items
o Commitment errors are involved
o Subsequent (period-end volume rebate) settlement is involved
In the case of stock transfers within a company code, the "Hold" function
is generally inactive. If an application object contains an error of any
kind, the function is likewise inactive.

Req. delivery date and Delivery date should be same in a sales order

Hi experts,
We need a customization for getting Requested delivery date, Material Availability date and Delivery date should be same.
Example if I keep request delivery date as 12/12/2012, system should consider same dates for MAD and Delivery and confirm the requested quantity.
How to achieve this customization..
Thanks,
Bala.

system should consider same dates for MAD and Delivery and confirm the requested quantity
What you are going to achieve by this? Hope you know the concept of MAD and confirmed quantity fields. Let us assume, if stock is not there for a material for which sale order is created, can you let me know, you want the system still to confirm the quantity? You can post the goods issue only if system confirms the quantity in schedule line which is possible, only if stock is made available. If client asks something which is not possible in SAP, think in a logical way how SAP works and convince them accordingly.
G. Lakshmipathi

Customer purchase order date allow 01.01.0511 in sales order ??

Similar Messages

Maybe you are looking for