About Resource Object which get created after careting GTC flat file conn.
Hi,
I have one query:
Whenever we create GTC for flat file reconciilation it creates new RO & new Process definition etc.
So in this case in OIM there are two ROs one for Proviioning process and another which get created after we create GTC for reconciilation.
But I don't want two seperate RO for single resource.
what we can do?
Hi
I'm using single host implementation OWB10g/Oracle on same host.
My flat file location is
c:\source\dept.txt
Pl tell me if I have to save the same file on any particular location for OWB to read.
Implementation in OWB10g
1. Created Flat File module, selected Connector & Location Details.
2. Done mapping for source file & target table.
3. Validated & Generated the mappings.
4. Deployed the mapping in Deployment Manager.
5. Following was Error Message after execution of the mapping.
Can not read data from file
c:\souredept.txt
OPTIONS ( ERRORS=50, BINDSIZE=50000, ROWS=200, READSIZE=65536)
LOAD DATA
CHARACTERSET WE8MSWIN1252
INFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.txt'
BADFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.bad'
DISCARDFILE '{{TEXT_DATA_LOCATION.RootPath}}dept.discard'
INTO TABLE "{{TARGET_LOCATION.Schema}}"."DEPT"
APPEND
REENABLE DISABLED_CONSTRAINTS
FIELDS
TERMINATED BY ','
OPTIONALLY ENCLOSED BY '"'
"DEPTNO" POSITION (1) INTEGER EXTERNAL ,
"DNAME" CHAR ,
"LOC" CHAR
Thx in advance
Similar Messages
-
How to get object which is created previously?
Hi ,
My question is that how to get reference of the object which is created previously using reflection API.
that means,
suppose i created one instance of class : ABC
Class classAbc = Class.forname("ABC"); //load the class ABC.
Object abcClassObject =classAbc.newInstance(); // create an instance of classABC.
now how do i retrieve that object which is referred by ref. variable abcClassObject?
expecting a favourable reply,
Thanks & regards ,
SwapnilMy question is that how to get reference of the object which is created previously using reflection API.
Object abcClassObject =classAbc.newInstance(); // create an instance of classABC.
now how do i retrieve that object which is referred by ref. variable abcClassObject?abcClassObject is already a reference to it. Just use it. Nothing further required. -
IDOCS get created After one day?
Hello all,
the outbound idocs are get created after one day delay,
After uploading the materials the idocs have to generated through program RBDMIDOC and need to be posted immediately .
RBDMIDOC-scheduled at 10 mints .
but in our scenario the idocs are generated after one day delay..
what could be the reason?.
it's urgent .
Warm regards
Nandan
Edited by: Nandan ND on Feb 19, 2008 12:47 PM
Edited by: Nandan ND on Feb 19, 2008 1:35 PM
Edited by: Nandan ND on Feb 19, 2008 1:36 PMHi,
Check whether program RBDMIDOC is scheduled only once? If it is running only once then you this will happen.
And also schedule the job to execute only after your upload process is over.
Regards,
Ashok -
User exit/BADI to change the Accntg doc which gets created during Billing
I am trying to do the following . Is this possible ?
When a delivery related billing document is created an accounting document is created in the background , I want to modify the line items in the accounting document, Just before posting the accounting document.
I am using exit EXIT_SAPLV60B_008 as suggested but I don't see the accounting line items in any of the internal tables in this exit.
My accounting document when it gets created looks like this. And I want to modify one of these lines before the document is posted.
Thanks in advance.
Regards,
Ankur Bhandari
1 01 32517 Jaaaa 3,700.83 USD
2 50 3100000 MERCHANDISE SALES 3,199.96- USD
3 40 3100000 MERCHANDISE SALES 160.00 USD
4 50 3200000 DELIVERY INCOME 132.00- USD
5 50 3200000 DELIVERY INCOME 10.00- USD
6 50 2170156 SALES TAX COLLECTED 198.87- USD
7 50 3400000 WARRANTY INCOME 320.00- USD
8 15 32517 Jaaaa 3,700.83- USD
9 40 1117217 RECV. VISA/MCARD Sto 3,700.83 USD
Any answers on how can I delete line 1 8 and 9 and add another line which balances the amount ?
Need to do this just before the accounting document gets generated.
Is this possible ?Hi Ajay,
I just want throw a light on your issue.
There are couple of other user-exits also available here.
Just check the required data is available or not?
EXIT_SAPLV60B_001 User Exit AC Interface (Header Line)
EXIT_SAPLV60B_002 User Exit AC Interface (Customer Line)
EXIT_SAPLV60B_003 User Exit RW Interface (Cost)
EXIT_SAPLV60B_004 User Exit AC Interface (GL Account Item)
EXIT_SAPLV60B_005 User Exit AC Interface (Accruals)
EXIT_SAPLV60B_006 User Exit AC Interface (Tax Line)
EXIT_SAPLV60B_007 User Exit AC Interface (Customer Line)
EXIT_SAPLV60B_008 User Exit AC Interface Transfer Tables
EXIT_SAPLV60B_010 User Exit Item Table for the Customer Lines
Thanks,
Ramakrishna -
Functional module which get triggered after posting of the document F-22
Hi,
I am posting the documents using the transaction F-22. I need to update some table after the documet will get post.
I try to find out the BTE'S in the transaction FIBF but unable to find it out.
Can anyone help me to find out the relvant functional module which will get triggered after the posting of the documents.
Please help me with this.
Thanks in advanced.
Regards,
DarshanaHi Harini,
It is also not get triggered while i am posting the documents.
Can you please suggest me some more functional modules.
Thanks in advanced.
Regards,
Darshana -
Backend PO not getting created after EHP6 upgrade
Hi Friends,
Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
Regards,
Ramesh.When We are creating shopping cart, system will create Po in back end based on our BAPI.
Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
I hope you should check all the configuration in backend system i.e in ECC and SRM side.
Do again batch running and check whether back ground job getting created or not. -
Movemailbox issue: new empty calendar folder gets created after mailbox move
Hi,
when doing mailbox moves between Exchange 2010 and Exchange 2013 (CU3 and SP1) and also between two Exchange 2013 SP1 servers we experience the following issue:
sometimes a new empty default calendar folder is being created after the mailboxmove completes. Out of 230 moved mailboxes 6 mailboxes experienced this issue. For some reason the existing calendar folder is changed to a user created folder and a new
calendar folder gets being created. This causes some panic by the affected users, since they suddenly notice that their calendar is completely empty. The free/busy information other people see is also empty because they also see the empty calendar.
To correct the issue I have to manually move the items from the original calendar folder to the newly created calendar folder.
Any idea what might cause this? I don't have reproduction steps, it just happens at random during the mailbox move. The moverequest completes succesfully, no errors are reported and the movereport also doesn't contain any clues.
Frank.But outlook wasn't running, so outlook couldn't have created the new calendar folder. I did the mailbox move out of office hours. Right after the mailbox move completed I ran the 'get-mailboxfolderstatistics' cmdlet. When looking at the output I search
for 'user created' calendar folders called 'Calendar'. The mailboxes that were affected also had another 'Calendar' folder of the type 'Calendar'. This is the newly created folder. So the mailbox contains two folders called 'Calendar' after the move. Although
I can't reproduce it, I'm able to detect when it happened by looking at the output of the above cmd-let. -
I have a csv file that I need to generate a schema for. I am trying to generate a schema using flat file schema wizard but I keep getting "Object reference not set to an instance of an object." error when I am clicking on the Next button after
specifying properties of the child elements on the wizard. At the end I get schema file generated but it contains an empty root record with no child elements.
I thought may be this is because I didn't have my project checked out from the Visual SourceSafe db first but I tried again with the project checked out and got the same error.
I also tried creating a brand new project and generating a schema for it but got the same error.
I am not sure what is causing Null Reference exception to be thrown and there is nothing in the Windows event log that would tell me more about the problem.
I am using Visual Studio 2008 for my BizTalk development.
I would appreciate if some has any insides on this issue.Hi,
To test your environment, create a new BizTalk project outside of source control.
Create a simple csv file on the file system.
Name,City,State
Bob,New York,NY
Use the Flat file schema Wizard to create the flat file schema from your simple csv instance.
Validate the schema.
Test the schema using your csv instance.
This will help you determine if everything is ok with you environment.
Thanks,
William -
Steps to create Data loading from Flat File to Info Cube in BI
Hi,
I am very new BW, I need some one help. When I am trying to create info source i am any pop window stating to create Transaction data or master data.
After creating Info source, I dont know how to assign this info source to source system (which i created).
When select the context menu of info source I dont have option to assign the datasource.
And one more thing is When I am creating the Info Cube. I cant understand how to create.
Please some one help me how to map the fields to Source system.
Regds
Dave.Hi,
For flat file upload, first you need to create the source system.
Then you need to create the infosource based on the format of the flat file you are going to upload or vice versa depending on your requirements.
Once your infosource is ready, right click on it and select assign datasource. Here you can assign your flat file datasource. Then create an infopackage and give the path from where the file is to be upload to BW (in the infopackage).
Also look at the thread below for procedure on flat file upload :
http://help.sap.com/saphelp_nw04s/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/frameset.htm
Cheers,
Kedar -
Creating JCo IDoc from flat file structure
Hi,
I need to send an IDoc into SAP using JCo.
The input to my program is a string containing lines representing a flat file idoc, e.g.
Line 1="EDI_DC40 2 ORDERS04.."
Line 2="E1EDK01 00000100000001 USD..."
Line 3="E1EDK14 0000030000000...."
Is there a simple way to use JCo to create & send the IDoc?
i.e.
1) If I use JCo and RFC IDOC_INBOUND_ASYNCHRONOUS, what would be all the steps/calls to SAP (create TID, call IDOC_INBOUND_ASYNCHRONOUS, confirm TID..?)
And can IDOC_INBOUND_ASYNCHRONOUS be called using the flat file structures (without having to map to all the JCo ParameterList fields)? Since the flat file structures are in the format required by the RFC, just in one long string.
Line 1=>IDOC_CONTROL_REC_40
Lines 2..n=>IDOC_DATA_REC_40
2) Similarly, if I were to use JCo plus the JCO IDoc library, is there a way to pass the flat file structures without having to do all the mapping to segment fields?
3) Other options..?
I want to use ALE to SAP, not files, even though the input is in the flat file structure.Your reply gives a link to the general JCo documentation.
It doesn't give ideas on how to call an RFC or IDoc from JCO without mapping each and every field from a flat file structure.
I'm looking for a way to do something like this:
Function IDOC_INBOUND_ASYNCHRONOUS has table parameters
IDOC_CONTROL_REC_40 STRUCTURE EDI_DC40
IDOC_DATA_REC_40 STRUCTURE EDI_DD40
Since I have the flat file representation of the IDoc, the first line should overlay exactly onto the EDI_DC40 structure. And the subsequent lines should overlay onto EDI_DD40. (all fields in this RFC are strings)
However JCO and JCO IDoc library seem very strongly typed, so it looks like I would have to map each field from the flat file structure to a field in the JCO Function or JCO IDoc object.
This could be done in a generic way using the function/idoc metadata, however there would still be some overhead.
Is there a way to get round this, and build the function/idoc treating its parameters as one long string? -
Modifying the number of records to skip after importing the flat file
I imported a flat file and the first row was the column header. I also created an external table for that flat file. The sqlldr is skipping the first record during the load. Is there a way to change this in the flat file module or External table?
If you marked this row as the header in the sample wizard then you will see the following in the External Table:
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
CHARACTERSET WE8MSWIN1252
STRING SIZES ARE IN BYTES
NOBADFILE
NODISCARDFILE
NOLOGFILE
SKIP 1
So the external table is skipping this.
Now the issue with changing it is interesting because you cannot change this after the sampling... I think this is a bug which I will file.
Let me know if this answers the question,
Jean-Pierre -
Error while creating process chain for flat file loading
Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
MamtaHi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan -
Uploading Dynamically created Internal table form Flat file
I am creating dynamic internal table as follows:
*-create dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_fldcat[]
IMPORTING
ep_table = i_modify.
ASSIGN i_modify->* TO <fs_tab>.
The dymamic internal table is created with the given Ztable in the selection screen.
Now the problem is when I try to upload this table <fs_table> using function module Call function 'UPLOAD'.
The first column of flat file is getting updated in Mandt of <fs_table>.
I want to update sy-mandt in MANDT of <fs_table> and the rest of the fields with flat file data.
e.g.
Flat file data:
100 white
101 black
<fs_table> structure is getting uploaded as below
mandt zcode zdesc
100 white
101 black
if the clint is 700
it has to be uploaded as
mandt zcode zdesc
700 100 white
700 101 black
Can someone knows what should be the approach or any other function module to be used ?
Message was edited by:
Mahesh SahuSee the answer in your previous thread and close this thread. why do you want to have many threads for one question.
-
Create Mapping As a Flat File Source
Hi,
I'm new to OWB, my first project is to load data through flat file to oracle.
step i follow is,
=>Create Flat File Module
=>Create Location Directory
=>Create Flat File
=>Create External Table (Synch with my Flat File)
=>Create Mapping (Simple External Table mapped to table operator)
=>Create and bind table Operator
Mapping successfully deployed and but when i want to run it gives me following Error
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file IPDirectory.txt in FLAT_FILE_MOD_LOC_0 not found
When I directly mapped flat file to Table in mapping it gives another error
RPE-01013: SQL Loader reported error condition, number 4.
SQL*Loader-522: lfiopn failed for file (\\sfs\Analytics\Reference\SIMPLE_MAP.log)
I mention here that im working on my pc with OWB Client not on server and want to load data through flat file which is on my pc or on our sharing drive.
Please help me on this issue
RegardsHi,
OWB generates SQL * Loader code for Flat File operator, if you try to change the configuration parameter to PL/SQL it results in error.
External tables would be a better choice as it reduces the processing time, disk space required and also makes it possible to use SQL and other complex transformations. -
How to create source system for flat file loads
How do I create a source system to load flat file?
I have a screen that asks for the following:
Logical system name
Source system name
Type and release
What should I enter for these?
I am not Basis and Basis was supposed to set this up.hi sam.
STEPS TO CREATE FLAT FILE SOURCE SYSTEM
step:1 select source systems under modeling in AWB.
step:2 select Source Systems root node.
|---> context menu
|--->create......
step:3 select your required source system Icon.
(in your case it is PC Icon).
there it askes for a logical.......and source system name...
here u can specify any name of ur wish
for example:-
logical sys name --- PC_FF
source system name --- flat file source system*
*press Continue * button.
Observe the activation icon to confirm the successfull creation(_glowing lamp icon_ symbol)
Maybe you are looking for
-
Not to print Zero values in SMART Forms
Hi all, I have a problem there is a field in SMART FORMS if it is having a zero value it should not print value as 0.00 instead there should be a blank. How to print blank instead of Zero value. Waiting for helping hands in this problems. Thanks in A
-
How do I install to seperate drives?
On a pc with WIN7 64 I installed the CS6 programs I use most (Photoshop, Illustrator, Premiere, AE) to the C drive, a ssd. I had the rest of CS6 installed on a 7200rpm drive (drive D) that failed. I have replaced that secondary drive (D) and I'm at
-
I live in New Zealand and will be travelling too Hawaii next month, if I use the phone for GPS will I be charged for global roaming data?
-
Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2?
-
When trying to view mi vid clips and exclamtion symbol appears and i cant view them
When i click onto a video clip i have stored in itunes, and exclamation symbol appears beside it saying its missing and would i like to try and locate the clip myself. I have tried this and nothing seems to work, how can i removed the symbol and watc