Backend PO not getting created after EHP6 upgrade
Hi Friends,
Recently there was an SAP patch upgrade in ECC 6.0 and after that while creating the shopping cart the PO is created, but it is not transferring to ECC. We are using the extended classic scenario SAP SRM 7.0. I had checked almost everything right from debugging still clueless. even checked the forums but still the issue is not resolved. Any hints of how to proceed now.
Regards,
Ramesh.
When We are creating shopping cart, system will create Po in back end based on our BAPI.
Check whether BAPI is running properly or not. You are updated new version EHP6 , I hope you should do required configuration. Try in development server whether Po are creating backend or not.
I hope you should check all the configuration in backend system i.e in ECC and SRM side.
Do again batch running and check whether back ground job getting created or not.
Similar Messages
-
"disp+work" process in not getting started after kernel upgradation
Hello Experts,
Good day…..,
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741, but the “disp+work” process is not getting started after kernel upgrade.
I have posted “dev_W0” log &
“disp+work” command result obtained in CMD prompt of respective server.
Please help me out in this. Thanks all in advance.
“dev_w0” Log”
trc file: "dev_w0", trc level: 1, release: "741"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 55
M sid TNG
M systemid 562 (PC with Windows NT)
M relno 7410
M patchlevel 0
M patchno 42
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile D:\usr\sap\TNG\SYS\profile\TNG_DVEBMGS55_ABTHMSSB01
M pid 2392
M
M
M Wed Jul 23 02:04:35 2014
M kernel runs with dp version 208000(ext=117000) (@(#) DPLIB-INT-VERSION-208000-UC)
M length of sys_adm_ext is 500 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 2392) [dpInit.c 731]
M DpCommonParamInit: rdisp/core_file_size = default --> no change
I MtxInit: 30000 0 0
M
M Wed Jul 23 02:04:36 2014
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: alloate/attach shared memory (mode=ATTACH)
M DpShMCreate: sizeof(wp_adm) 24288 (1104)
M DpShMCreate: sizeof(tm_adm) 51472080 (256080)
M DpShMCreate: sizeof(ca_adm) 432000 (72)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/7464064/7583152
M DpShMCreate: sizeof(comm_adm) 7583152 (14904)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpSockTableSize: max/headSize/ftSize/tableSize=500/16/520064/520080
M DpShMCreate: sizeof(sock_adm) 520080 (1016)
M DpShMCreate: sizeof(vmc_adm) 0 (3208)
M DpShMCreate: sizeof(wall_adm) (ft=41664/fi=67472/hd=64/rec=192)
M DpShMCreate: sizeof(amc_rec_adm) (ft=86464/fi=67472/hd=64/rec=416)
M DpShMCreate: sizeof(websocket_adm) (ft=28864/hd=64/rec=272)
M DpShMCreate: sizeof(gw_adm) 64
M DpShMCreate: sizeof(j2ee_adm) 3936
M DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000103D0050, size: 60433936
M DpShMCreate: allocated sys_adm at 00000000103D0250
M DpShMCreate: allocated wp_adm_list at 00000000103E20F0
M DpShMCreate: allocated wp_adm at 00000000103E2410
M DpShMCreate: allocated tm_adm_list at 00000000103E84F0
M DpShMCreate: allocated tm_adm at 00000000103E8730
M DpShMCreate: allocated ca_adm at 00000000134FF000
M DpShMCreate: allocated comm_adm at 0000000013568980
M DpShMCreate: system runs without slock table
M DpShMCreate: allocated sock_adm at 0000000013CA4130
M DpShMCreate: allocated vmc_adm_list at 0000000013D232C0
M DpShMCreate: system runs without VMC
M DpShMCreate: allocated gw_adm at 0000000013D23560
M DpShMCreate: allocated j2ee_adm at 0000000013D237A0
M DpShMCreate: allocated ca_info at 0000000013D24900
M DpShMCreate: allocated wall_adm (ft) at 0000000013D24B40
M DpShMCreate: allocated wall_adm (fi) at 0000000013D2F000
M DpShMCreate: allocated wall_adm (head) at 0000000013D3F990
M DpShMCreate: allocated amc_rec_adm (ft) at 0000000013D3FBD0
M DpShMCreate: allocated amc_rec_adm (fi) at 0000000013D54F90
M DpShMCreate: allocated amc_rec_adm (head) at 0000000013D65920
M DpShMCreate: allocated websocket_adm (ft) at 0000000013D65B60
M DpShMCreate: allocated websocket_adm (head) at 0000000013D6CE20
M DpShMCreate: initialized 21 eyes
M DpCommAttachTable: attached comm table (header=0000000013568980/ft=0000000013568990/fi=0000000013C86E10)
M DpSockAttachTable: attached sock table (header=0000000013CA4130/ft=0000000013CA4140)
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use Semphore 33 for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X
X Wed Jul 23 02:04:37 2014
X mm.dump: set maximum dump mem to 96 MB
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Wed Jul 23 02:04:44 2014
M ThInit: running on host ABTHMSSB01
I MtxInit: 0 0 0
M
M Wed Jul 23 02:04:45 2014
M calling db_connect ...
B Loading DB library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\TNG\DVEBMGS55\exe\dboraslib.dll' is "741.10", patchlevel (0.42)
C Prepending D:\usr\sap\TNG\DVEBMGS55\exe to Path.
C Register application info.
C
C Wed Jul 23 02:04:47 2014
C Oracle client version: 10.2.0.4.0, (dbsl 741 040714, UNICODE[2])
C Detailed Oracle client (patch) info not available.
C *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
M ***LOG R19=> ThDbConnect, db_connect ( DB-Connect 000256) [thDatabase.c 76]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step TH_INIT, thRc ERROR-DB-CONNECT_ERROR, action STOP_WP, level 1) [thxxhead.c 2281]
M Wed Jul 23 02:04:48 2014
M
M Info for wp 0
M
M pid = 2392
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M workerType = DP_WORKER_DIAWP
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M report = > <
M action = 0
M tab_name = > <
M
M ThIErrHandle: no current incoming request
M
M
M *****************************************************************************
M *
M * LOCATION SAP-Server ABTHMSSB01_TNG_55 on host ABTHMSSB01 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Jul 23 02:04:48 2014
M * RELEASE 741
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 16797709
M * MODULE D:/depot/bas/741_REL/src/krn/si/th/thxxhead.c
M * LINE 2470
M * COUNTER 1
M *
M *****************************************************************************
M
M PfRejectStatistic: clear statistic record
M PfClearAllRec: clear statistic area
M PfClearAllRec: statRecordAction = STAT_RECORD_ACTION_REJECT
M Entering TH_CALLHOOKS
M ThCallHooks: call hooks for event BEFORE_DUMP
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 2392) [dpnttool.c 335]
“Desp+Work” Command result:
C:\Users\tngadm>disp+work
disp+work information
kernel release 741
kernel make variant 741_REL
compiled on NT 6.0 6002 x86 MS VC++ 16.00 for NTAMD64
compiled for 64 BIT
compilation mode UNICODE
compile time Jul 9 2014 16:39:46
update level 0
patch number 42
source id 0.042
RKS compatibility level 0
supported environment
database (SAP, table SVERS) 700
710
701
702
703
711
720
730
731
732
738
740
operating system
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Windows NT 6.1
Windows NT 6.2
Windows NT 6.3
C:\Users\tngC *** ERROR => Connect via SAPUSER not supported for kernel >= 740.
[dbsloci.c 2406]
C Only Secure Connect method possible.
For this issue you need to set up SSFS.
1639578 - SSFS as password storage for primary database connect
I am new to SAP. I installed SAP ECC6 EHP4 with default kernel version 701 and it was working fine.
I have upgraded kernel version from 701 to 741
Are you sure kernel 741 is compatible with an EHP 4 system ?
Read this SAP note
1969546 - Release Roadmap Kernel 740
Regards
RB -
Ipod Touch not getting detected after IOS upgrade.
I have recently upgraded the firmware of my Ipod Touch (1G) to IOS 3.0.1 and was successful in upgrading.
The issue i am facing is that my ipod touch is not getting detected after reconnecting and the ipod touch is not getting switched on...it is just showing the apple symbol and the progress bar.
Please let me know if anyone has faced similar type of issue.
Please also let me know the resolution for this.Are you using a USB hub? Try connecting the iphone directly to the computer's USB port and see if that makes a difference.
Also, with the upgrade, this seems to happen a lot. Most of the time if it is not the USB issue above, it can be resolved by simply redownloading Itunes and installing it on top of your current installation. -
Backend PO not getting created inspite of Complete shopping cart
Dear All,
We are having Classic Scenario with SRM 5.0 in integration with ECC 6.0 with support pack SAPKIBKT09.
After Shopping cart creation with all details (fixed vendor, material, price etc) still backend system doesn't create PO. It always creates PR. Wht settings are missing plz suggest.....
I understand that I have maintained under "Define objects in Backend system" as Purchase order if item data complete otherwise PR. Product categories has been transfered from backend.Document type has been created as ECPO in backend for PR and PO both.
Kindly suggest any solution or pointers....
Thanks
Regards
Dinesh Singhhave you specified the backend po no range under
SRM IMG ->Supplier Relationship Management->SRM Server->Cross-Application Basic Settings->Number Ranges->SRM Server Number Ranges->Define Number Ranges per Backend System for Follow-on Documents
no range of POs (preferably as PO)
this interval should be defined in above step
Define Number Ranges for Shopping Carts and Follow-on Documents
this no range should match to the external no range in ECC under
IMG->Materials Management->Purchasing->Purchase Order->Define Document Types-> the desired PO doc type in ECC
Aslo for attribute BSA yr ECC PO doc type should be available.
If you are using ECC contract as a SOS for SC item
For that coontract type in ECC the PR type should be liked in contract doc type config.
Also check the logic in BADI BBP_CREATE_BE_PO_NEW
BR
Dinesh -
Dear all
i have successfully upgrade oracle database from 10.2.0.2.0 to 11.2.0.2.0 through dbua but after upgrade i have copied listener and tnsname from realese to and new release then i follow these step
Stop listener it get stop perfectly
start listener it won't get start it gives ora-12560 error
i have checked and change the file at /usr/sap/sid/sys/profile/oracle also
if there is anything to do with control file let me know
Kindly suggest for the aboveHi Rajendra,
Please refer:
1755636 - Database Administrators Segregation
480266 - Problems with the SYSDBA/SYSOPER/INTERNAL connect
700548 - FAQ: Oracle authorizations
Divyanshu -
Oracle database not getting Up after patch upgrade
Hi,
I have upgraded my oracle database from 10.0.2.1 to 10.0.2.4. after this databse is not coming up. I am able to start/stop listner but while starting SAP it is not able to start databse. Pasting error log below.
Wed Jun 24 14:56:45 PDT 2009
LOGFILE FOR STARTING ORACLE
Trying to start CRD database ...
Wed Jun 24 14:56:45 PDT 2009
checking required environment variables
ORACLE_HOME is >/oracle/CRD/102_64<
ORACLE_SID is >CRD<
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
check initora
Wed Jun 24 14:56:45 PDT 2009
checking V2 connect
TNS Ping Utility for Linux: Version 10.2.0.4.0 - Production on 24-JUN-2009 14:56:45
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
/usr/sap/CRD/SYS/profile/oracle/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = CRM) (PORT = 1527))) (CONNECT_DATA = (SID =
CRD) (GLOBAL_NAME = CRD.WORLD)))
OK (0 msec)
tnsping: V2 connect to CRD
Wed Jun 24 14:56:45 PDT 2009
Connect to the database to check the database state:
R3trans: connect check finished with return code: 12
Database not available
Wed Jun 24 14:56:45 PDT 2009
Shutdown database
First trying to shutdown the database - May be,
the database is in the nomount or mount state
Wed Jun 24 14:56:45 PDT 2009
starting database
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Jun 24 14:56:45 2009
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1224736768 bytes
Fixed Size 2083560 bytes
Variable Size 620758296 bytes
Database Buffers 587202560 bytes
Redo Buffers 14692352 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forced
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Data Mining and Real Application Testing options
Wed Jun 24 14:56:53 PDT 2009
Connect to the database to verify, that the database is now open
R3trans check finished with return code: 12
ERROR: Startup of database failed
Notify Database Administrator.
/usr/sap/CRD/SYS/exe/run/startdb: Terminating with error code 12
thanks,
BhanuHi,
I have tried to start and stop oracle from SPLplus but no luck. i am pasting alert log file which is saying some block courruption......
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 1224736768
shared_pool_size = 587202560
shared_pool_reserved_size= 57982058
filesystemio_options = setall
control_files = /oracle/CRD/origlogA/cntrl/cntlrCRD.dbf, /oracle/CRD/origlogB/cntrl/cntrlCRD.dbf, /oracle/CRD/sapdata1/cntrl/cntrlCRD.dbf
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 587202560
compatible = 10.2.0
log_archive_dest = /oracle/CRD/oraarch/CRDarch
log_buffer = 14246912
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = /oracle/CRD/saptrace/background
user_dump_dest = /oracle/CRD/saptrace/usertrace
core_dump_dest = /oracle/CRD/saptrace/background
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = CRD
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 773094113
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2, OS id=25204
PSP0 started with pid=3, OS id=25206
MMAN started with pid=4, OS id=25208
DBW0 started with pid=5, OS id=25210
LGWR started with pid=6, OS id=25212
CKPT started with pid=7, OS id=25214
SMON started with pid=8, OS id=25216
RECO started with pid=9, OS id=25218
CJQ0 started with pid=10, OS id=25220
MMON started with pid=11, OS id=25222
MMNL started with pid=12, OS id=25224
Wed Jun 24 15:06:19 2009
ALTER DATABASE MOUNT
Wed Jun 24 15:06:24 2009
Setting recovery target incarnation to 1
Wed Jun 24 15:06:24 2009
Successful mount of redo thread 1, with mount id 182910572
Wed Jun 24 15:06:24 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Wed Jun 24 15:06:24 2009
ALTER DATABASE OPEN
Wed Jun 24 15:06:24 2009
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Wed Jun 24 15:06:24 2009
Started redo scan
Wed Jun 24 15:06:24 2009
Completed redo scan
1 redo blocks read, 0 data blocks need recovery
Wed Jun 24 15:06:24 2009
Started redo application at
Thread 1: logseq 16126, block 2, scn 1104239482
Wed Jun 24 15:06:24 2009
Recovery of Online Redo Log: Thread 1 Group 2 Seq 16126 Reading mem 0
Mem# 0: /oracle/CRD/origlogB/log_g12m1.dbf
Mem# 1: /oracle/CRD/mirrlogB/log_g12m2.dbf
Wed Jun 24 15:06:24 2009
Completed redo application
Wed Jun 24 15:06:24 2009
Completed crash recovery at
Thread 1: logseq 16126, block 3, scn 1104259484
0 data blocks read, 0 data blocks written, 1 redo blocks read
Wed Jun 24 15:06:25 2009
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=25232
Wed Jun 24 15:06:25 2009
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=25234
Wed Jun 24 15:06:25 2009
Thread 1 advanced to log sequence 16127 (thread open)
Thread 1 opened at log sequence 16127
Current log# 3 seq# 16127 mem# 0: /oracle/CRD/origlogA/log_g13m1.dbf
Current log# 3 seq# 16127 mem# 1: /oracle/CRD/mirrlogA/log_g13m2.dbf
Successful open of redo thread 1
Wed Jun 24 15:06:25 2009
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Wed Jun 24 15:06:25 2009
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Wed Jun 24 15:06:25 2009
ARC1: Becoming the heartbeat ARCH
Wed Jun 24 15:06:25 2009
SMON: enabling cache recovery
Wed Jun 24 15:06:25 2009
Errors in file /oracle/CRD/saptrace/usertrace/crd_ora_25226.trc:
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Wed Jun 24 15:06:25 2009
Error 704 happened during db open, shutting down database
USER: terminating instance due to error 704
Instance terminated by USER, pid = 25226
ORA-1092 signalled during: ALTER DATABASE OPEN...
Thanks,
Bhanu -
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard, no Weblogic server profile is getting created in the doamin folder. Even the WL Admin server is not getting created. The Domain Configuration utility did not throw any errors.
1) Is this problem related to Oracle repository for SOA suite 11g?
2) Can the repository schemas (Oracle) hold multiple weblogic SOA domain information?Hi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
Weblogic servers directory not getting created in the domain directory
Hi
I installed weblogic 12c(12.1.1.0) and then ran the config.sh to create the domain/managed servers directories.
After the config.sh completely ran I am not seeing the servers directory under the domain directory. All other directories like config, bin are present under the domains directory.
If anyone can let me know for weblogic-12c if they have come across such a issue during installation/configuration please reply to this thread.
Thanks
BharanBHi,
Weblogic servers directory do not gets created after domain creation or even managed server configuration. It will present itself only when you start the managed server for the first time, that is when it initializes all security attributes, diagnostic attributes (if configured) , etc..
Perform server start and then check if it gets created or not.
## rank answer if it is helpful ##
Thanks,
Ranjan -
Integration with EWM-Inspection lot not getting created
Hi,
Inspection lot not getting created after GR is done.
The scenario is Storage location is connected to external warehouse management,so after the GR is done in the legacy system via interface it is updated in ECC.so while checking the material document inpection lot is not created.
Can anyone please tell me the necesaary check points and integeration steps between WM and QM in this case .
Thanks in advance.......Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn -
Integration with QM-Inspection lot not getting creating
Hi ,
Inspection lot is not getting created after GR is posted.
Scenario:Storage location is connected to external warehouse management.
Can anyone please explain the necessary check points and Integration steps needed to be followed for inspection lot creation.Hi,
Since you didn't say much, I assume you are creating stock into ECC via LSMW using 561 movement. Now to get inspection lot for these batches/ docs, you need to activate inspection type 05.
Go to material master QM view, assign and activate inspection type 05.
Additionally, create a respective inspection plan/ task list for the material(s) to carry out RR and get the consistent inspection lots.
ntn -
SRM PR is not getting created in ECC backend
Hello Experts,
We are running SRM 7.0 with SRM-MDM Catalog, we are using SRM for shopping. We do have PI 7.11 running in the Environment as well.
We are on ECC 6.0 with Ehp 4.0
Purchase Order:
However we can see the PO creating successfully using PI.
Question, in the SRM table (BBP_FUNCTION_MAP), we see the object type: BUS2012 for ERP 4.0 has adapter name: /SAPSRM/CL_SOA_ADPT_PO_CRT_ERP for when creating PO. Please see teh screen shot.
is this the reason that we need PI?
Purchase Requisition:
PR Creation is not working:
PR is not getting created in the ERP, PR uses Object type: BUS2105, Adpater CL_BBP_BS_ADAPTER_RQ_CRT_470 for ERP 4.0 System type, can you please tell me if the adapter is correct for ERP 4.0 system type?
I also have a question to ask:
1) Where did you see that PR/PO was send to PI System (PI1)? My understanding is that since ERP amd SRM are 2 ABAP Systems, why we cannot send the PR/PO directly to ERP system from SRM? Why do we need a middleware(PI) in between for this process? We should be able to USE BAPI function to do it correct?
Please advice.
Thanks
Kumaryes, i could see a PR number with all this additional details as below.
Table BBP_PDBEI
CLIENT 453 Client
GUID 4CAEFA58EB9D005CE1008000AC1C2031 Globally Unique identifier
BE_LOG_SYSTEM QA1400 Logical System of Logistics Backend
BE_OBJ_ITEM Follow-On Object Item in Back-End System
BE_OBJECT_TYPE BUS2105 Follow-On Document Object Type in Back-End System
BE_OBJECT_ID 2000000167 Follow-On Document Object ID in Back-End System
BE_REFOBJ_TYPE Reference Object Type in Back-End System
BE_REFOBJ Reference Object in Back-End System
BE_REFOBJ_ITEM Reference Object Item in Back-End System
BE_REFOBJ_SBITM Reference Object Sub-Position in Backend System
BE_REFOBJ_TYPE2 Reference Object Type in Back-End System
BE_REFOBJ2 Reference Object in Back-End System
BE_REFOBJ_ITEM2 Reference Object Item in Back-End System
BE_REFOBJ_FYEAR2 0000 Reference Document Object - Fiscal Year in Back-End System
BE_STGE_LOC Storage location
BE_PLANT 2016 Plant
BE_BATCH Batch Number
BE_VAL_TYPE Valuation type
BE_MOVE_REAS 0000 Reason for Movement
BE_EXPERYDATE 00000000 Shelf Life Expiration Date
BE_PUR_GROUP 206 Purchasing group
BE_PUR_ORG 2000 Purchasing organization
BE_CO_CODE 2000 Company Code
BE_DOC_TYPE CLRQ Purchase Requisition Document Type
BE_ACCREQUIRED Account Assignment for Logical Backend Required
BE_SP_STK_IND Key for Special Stock Section
BE_INFO_REC Number of purchasing info record
BE_MOVE_TYPE 201 Movement type (inventory management)
BE_PACKNO 0000000000 Package number
BE_INTROW 0000000000 Internal line number for limits
BE_ITEM_TEXT Short Text of a Service Purchase Order Item
BE_PO_PRICE 1 Price from Backend
BE_UNLOAD_PT 200 Unloading Point in Backend
BE_DEL_IND Deletion Indicator in Backend Documents
BE_TRACKING_NO Requirement Tracking Number
BE_COND_TYPE Condition Key
BE_COND_STEP 000 Level Number
BE_COND_COUNTER 00 Condition counter -
Inspection lot not getting create for 01 Insp type after Intransit
Hi Qm Gurus,
I have a Material 'A' which is producing in the plant IN05 and transferring to IN06 plant. We have Scheduling agreement PO for this. After Scheduling Agreement we are doing Transferring the Goods thro 351 GI Movement type. So now the parts will be there in transit.
So now when I receive this goods in IN06 thro 101 MT, Insp lot is not getting create, it goes to Unrestricted. If I create a std PO for the same when I receive the goods thro 101, it is posting into Insp lot. But after 351 & if I do 101 material is not going into Inspection. Pls advise.
I checked the Insp type 01 Active for IN06, Quality info record is fine, Quality plan also fine. Pls let me know whether i am missing something?Hi ,
Please activate inspection type 08 stock transfer ..
If this inspection type is active then during stock transfer lot gets generated.
Also check QM active for this perticular movement in custamizing setting.
Regards
SANIL -
WBS Elements not getting created in ECC Project System from CRM 7.0
Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1. Set up the RFC connections between the two systems
2. Selected the connection type as Middleware in CRM system.
3. Installed the cProject Add on in CRM box.
4. Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5. The Project Scenario in PS config has the same name as the Project Type in CRM config.
6. Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya ShrivastavaHello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor. -
Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm -
Screen fields not getting displayed after Line 16
Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?
Maybe you are looking for
-
Problems setting up Mail to Exchange
Hey everyone, Having a few problems setting up mail to exchange on a Nokia 5800. We have the latest version of Mail to Exchange installed. Were using Microsoft Exchange 2007. Example serup of what we have done: Mail to exchange - New profile - Input
-
Hard drive recovery and replacement
I have a T43 1875. The hard drive has gone out - can't access operating system, clicking sound, blue button doesn't work. I have obtained the set of boot, rescue and recovery disks and a new hard drive. I can follow the video to physically replace th
-
Create list item in sharepoint online list throws error in iPhone
Hi all : I have got a piece of JS code where I am creating multiple list items. So first I am creating an Expense item and then each of the expense line item( 5 of those ) in a different list. It creates the Expense item successfully and then when it
-
Can't view all my pictures on computer after syncing Iphone 3G
Help some of my pictures are in a format in my computer ithmb that I cannot open or view. I don't know why there are some pictures in this format and others are not. Is there any way to view these on my PC that I have them downloaded on?
-
Hi, I don't know if this is the place to address my situation, so I do apologize if this post is in the wrong place. I am trying to open a .swf file in my flash software and all I get is a blank screen. does anyone here know of this problem and/or ca