About the script......

hi team,
i need information on hr-benefits ... i have the standard form in se71..i.e hr_ben_conf...... and standard program : hrben0015(tcode) i need the write_from_, open_form... where they are located....in which program it is located.... i need the inforamtion urgently...... ok byeeeeeeeeeee

IF you have Tcode, soto SE93 and Identify the program name for that tcode. Once program name is identified.
GOTO se38, give program name and select radiobutton documentation and click display... go through the documentation if you have any standard form(sap script/smartform) it will be written there.
Close the thread once your question is answered.
Regards,
SaiRam

Similar Messages

About the script need to display

hi team,
                i am working on the script of hr_ben_conf.... i need to display the data from the structure rpben_da. in these structure i need to take the field to display the EE costs(employee only)...
we have different field :
         Bplan    pltyp     depcv from the structure of the rpben_da.
         DENT    dent        EE
         visi        visi         ee
          medi    medi     ee
i need to display the data of ee employee only ...... who to write this thing in the script level only........

hi
if u go throu debugging mode to the print program for the correponding script u will find this stucture will flow with values
pass the same to the script.
say for example.
RLVSDR40 is the standard print prog for this example
RLDRI is a struc where in we get TANUM ( transfer order no)
but when u go in debgg mode u will get the struc as XRLDRI in RLVSDR40.
so pass from the zprogram XRLDRI-TANUM to script.
u can able to print the values u require .
same logic try in urs.
try it it is possible.
Hope this might help u.
Thanks and regards,
Venkat.

About the script of restart sap server

Hi expert,now i want to restart the sap server using window's schedule to execute a script, not using sap's mmc.pls tell me how to do. thanks

just create a batch file with the stopsap, startsap commands on it and schedule using windows scheduler.
For more info about start and stop commands read,
http://help.sap.com/saphelp_nw04s/helpdata/en/70/b38937809c8f71e10000009b38f842/content.htm
Regards
Juan

About the script-benefit

hi team,
i need information on hr-benefits ... i have the standard form in se71..i.e hr_ben_conf...... and standard program : hrben0015(tcode) i need the write_from_, open_form... where they are located....in which program it is located.... i need the inforamtion urgently...... ok byeeeeeeeeeee

RPUBEN15

"Stop running the script?" error after power-up and before starting Firefox

I have a Windows 7 x64 Enterprise system with Firefox 10.0.02. I'm getting the error
''''''Stop running this script?'''
'''A script on this page is causing your web browser to run slowly. If it continues to run, your computer may become unresponsive''''''
after I power up my PC, but before I open Firefox.
The error message, of course, does not identify what "this page" is, or tell anything about the script. The error message doesn't even say it's from Firefox (or Internet Explorer, for that matter).
I've done a virus scan, a spyware scan, and an adware scan, but the error keeps popping up.
Everything I've found on the web about this error assumes the problem is with Internet Explorer, but I don't use IE.
Suggestions?
Thanks.

Start/All programs/Startup has only McAfee Security Scan Plus. After power-up, clicking on Show Hidden Icons lists Sound Effect, McAfee Total Protection, Spybot-SD Resident, Ad-Aware, and a flag labeled "Solve PC issues: 1 message".
If I click the flag, it opens Windows Backup Troubleshooting Options. The message is "Check your backup settings. Windows cannot find the disk or network location where your backups are being saved". There are two options -- Change backup settings and Try to run backup again.
This is because I do not usually have the external herd drive I use for backup attached. I ignore this message.
Also, Sql Server 2008 R2 and Oracle 11gR2 start up, along with IIS. I use this PC for various courses.
FWIW, I've attached screen grabs of the Services and Processes from Windows Task Manager.
Thanks.

A message keeps coming up about a script being busy or stopped responding and I want to know how to stop this from happening everytime I want to get on the internet.

A message came up on my desktop asking me to click on it and it warned me about my toolbars would no longer work. I believe I had just deleted Google Chrome. Now every time I want to go online I have to wait a minute or so before a message comes up and states: A script on this page may be busy or it may have stopped responding. You can continue to see if the script will complete". Then under the above message is this:
Script:chrome://tavgp/content/libs/include.js:595.
There are two boxes underneath that state "Continue" or "Stop script". I click on the "stop script" box and then I can get online. I don't know what this means or how to get rid of it and how do I get Firefox toolbar to work again? Did I do anything to my computer that is causing this error? I never had this problem until I clicked on the first message and I am sorry I didn't write the info down but I didn't know all this was going to happen.

That is a problem with an AVG extension (toolbar).
See:
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

What do you think of my Bash Script? What about the error checking?

Well what do you think of this Bash script
It works
I gave it some problems (i.e. unpluged the ethernet, messed up the URL's, uninstaled some programs...) to see if would report errors and stop or just keep going... But it did
I just kind of thought up a way to do some error checking with the commands that I know.....
What is a better way to do error checking?
What do you think I should add/Do to this script?
#!/bin/bash
# Shell script to make a USB Tumb Drive for Flashing BIOS on a Lenovo Ideapad Y510.
# This script needs to be owned and run as ROOT with the "sudo command"
# i.e. sudo usbbiosflasher
# If you have anyideas send me a PM on ubuntufourms.org my user name is HunterThomson
# Name/Rename this script usbbiosflasher and save it to the ~/home directory.
# Then run the command- chown root:root usbbiosflasher
# Then run the command- chmod 755 usbbiosflasher
# Then copy the script to the directory /usr/bin.
# Run this comand to do that- sudo cp ~/usbbiosflasher /usr/bin
# You also must have the program "mbr" installed
# You can install the mbr program by running this comand in the shell on Ubuntu
# sudo apt-get install mbr
# In Arch Linux you have to get it from Aur
# First you will need to know a few things...
# You will also need to know the Mount Point i.e. /media/disk and the /dev path i.e. /dev/sdb1.
# You can find these by using the df -T comand.
# Run df -T in the shell. Then plug in the USB Thumb Drive and run the df -T comand agin.
# The new listing is the USB Thumb Dirve.
# Also check to make sure the File System tipe is vFAT or FAT16 or FAT32.
# If it is not use gparted to format it to FAT32.
# I am farly certen that all USB Thumb drives come formated with FAT file system out of the BOX.
# You may want to fromat it anyway just to make sure.
echo "Interactive Shell Script to Make a USB Thumb Drive \for Flashing BIOS On a Lenovo Ideapad Y510"
echo ""
echo "You will need to have the program mbr installed"
echo "If you are on Ubuntu Linux you can retreve it form the repositories"
echo "If you are on Arch Linux you will need to get it from the Aur repository"
echo "Open anuther shell and \do that now..."
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
echo ""
# The next comand will make a directory to put needed files into. Note this file and everything init will be owned by root.
mkdir ~/usbbiosfiles && check1="yes"
if [ "$check1" = "yes" ]
then
echo "Made directory usbbiosfiles... OK"
else
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit
fi
# The next two comands will get the FreeDOS file and the .ROM file.
cd ~/usbbiosfiles && checka="yes"
if [ "$checka" = "yes" ]
then
echo "Changing to the usbbiosfiles directory... OK"
else
echo "Could not Change to the usbbiosfiles directory"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://www.fdos.org/bootdisks/autogen/FDOEM.144.gz" && check2="yes"
if [ "$check2" = "yes" ]
then
echo "Download of FreeDOS... OK"
else
echo "Could not Download FreeDOS"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
wget "http://ubuntuforums.org/attachment.php?attachmentid=78460&d=1216648756" && check3="yes"
if [ "$check3" = "yes" ]
then
echo "Download of the BIOS.ROM \file... OK"
else
echo "Could not Downlad the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
# The next comand will name the .ROM file to the right name.
mv ~/usbbiosfiles/attachment.php?attachmentid=78460\&d=1216648756 ~/usbbiosfiles/06CN29WW.bios.update.tar.bz2 && check4="yes"
if [ "$check4" = "yes" ]
then
echo "Renameing of the BIOS.ROM \file... OK"
else
echo "Could not rename the BIOS.ROM \file"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
echo ""
# The next two comands set the variables. DEVX for the path i.e. /dev/xxx and MOUNTX for the mount point i.e. /media/xxx
verify="n"
while [ "$verify" != y ]
do
echo "You will need to know the Mount Point and the dev Path. You will also need to \make sure the File System \type is vFAT, FAT16 or FAT32."
echo ""
echo "With the USB Thumb Drive unpluged, Open another shell and run the comand df -T Then plug \in the USB Thumb Drive and run the comand df -T one \more time. The new device listed is the USB Thumb Drive. Note the Mount Point and The dev Path and the File system Type i.e. vFAT... If the File System \type is not vFAT, FAT16 or FAT32 you will need to fromat it with gparted. You may want to format the USB Thumb Drive anyway just to \make sure. In any \case delete all files and directorys on the USB drive before you go any ferther with this program."
echo ""
printf "Enter the dev path the USB Thumb Drive is at?"
read DEVX
echo ""
echo "Are you sure $DEVX is the dev path of the USB Thumb Drive... y or n?"
read verify
done
echo ""
verify="n"
while [ "$verify" != y ]
do
printf "What is the Mount Point of the USB Thumb Drive?"
read MOUNTX
echo ""
echo "Are you sure $MOUNTX is the Mount Point of the USB Drive... y or n?"
read verify
done
echo ""
install-mbr --enable A1 --partition 1 --force --timeout 0 $DEVX && check5="yes"
if [ "$check5" = "yes" ]
then
echo "Installing MBR on USB Thumb Dirve... OK"
else
echo "Could not install MBR on USB Thumb Drive"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
tar xjf ~/usbbiosfiles/*.tar.bz2 && check7="yes"
if [ "$check7" = "yes" ]
then
echo "Unpacking BIOS.ROM file... OK"
else
echo "Could not unpack BIOS.ROM file"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
gunzip ~/usbbiosfiles/FDOEM.144.gz && check8="yes"
if [ "$check8" = "yes" ]
then
echo "Unpacking FreeDOS files... OK"
else
echo "Could not unpack FreeDOS files"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mkdir ~/usbbiosfiles/fdoem144 && check9="yes"
if [ "$check9" = "yes" ]
then
echo "Made directory fdoem144 in direcoty usbbiosfiles... OK"
echo ""
echo "Going to \sleep \for 5secs"
else
echo "Could not make directory fdoem144 in usbbiosfiles directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
modprobe loop && sleep 5 && check0="yes"
if [ "$check0" = "yes" ]
then
echo "Modprobeing loop... OK"
else
echo "Could not \modprobe loop"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
mount -o loop ~/usbbiosfiles/FDOEM.144 ~/usbbiosfiles/fdoem144 && check10="yes"
if [ "$check10" = "yes" ]
then
echo "Mounting FreeDOS on the fdoem144 directory... OK"
else
echo "Could not \mount FreeDOS on the fdoem144 directory"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/fdoem144/* $MOUNTX && check11="yes"
if [ "$check11" = "yes" ]
then
echo "Copying FreeDOS files to $MOUNTX... OK"
else
echo "Could not copy FreeDOS files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
cp ~/usbbiosfiles/*.ROM $MOUNTX && check12="yes"
if [ "$check12" = "yes" ]
then
echo "Copying BIOS.ROM files to $MOUNTX... OK"
else
echo "Could not copy BIOS.ROM files to $MOUNTX"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
sync && check13="yes"
if [ "$check13" = "yes" ]
then
echo "Runing the syncing command... OK"
else
echo "Could not run the syncing command"
echo "look above \for \info"
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this scrip agin"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
rm -r ~/usbbiosfiles
exit
fi
umount ~/usbbiosfiles/fdoem144 && check14="yes"
if [ "$check14" = "yes" ]
then
echo "Unmounting of FreeDOS... OK"
else
echo "Could not unmount FreeDOS"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
fi
verify="n"
while [ "$verify" != y ]
do
printf "Do you see any errors... yes or no?"
read AN2
echo ""
printf "You answered... $AN2 to errors. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN2" == "yes" ]
then
echo "User Repoted... Error"
echo "Look above for errors or problems reported and fix the problem"
echo ""
echo "removeing directory usbbiosfiles..."
echo ""
echo "Reformat the USB Stick to FAT32 with gparted"
echo "Fix the problem and run this script agin"
rm -r ~/usbbiosfiles
exit
else
echo "Success"
echo "I did a lot of error checking too and didnt find anything"
echo ""
echo "Go get a pen and paper to write down these instructions"
printf "Then hit the Enter to continue"
read WAIT
echo ""
echo "Now leave the USB Thumb Drive pluged into your computer and Reboot. When the Lenovo Logo POST screen appears hit F2 to enter the CMOS setup utility. Go over to BOOT tab and go down to HardDrive \(Not Boot Order) \then \select the USB Thumb Drive as the 1st hard drve. Then F10 and yes to save changes. Your compter will reboot agin. Then when the Lenovo Logo POST Screen appers on reboot hit F4 to enter the BIOS FLASHING program. The USB Thumb Drive will be seen as the C drive \in the list on the Left, Select it. Then \select the .ROM \file \in the list on the Right and start the BIOS FLASH. \(NOTE Your hart may stop beating... This is normal) Pray to any God you know of and your computer should restart just like normal. Hit F2 and the BIOS will now stay it is 06CN29WW. You will need to \set the boot order to the way you like it and other things \if you need to because they have been changed to the default."
fi
echo ""
echo "End of script"
Last edited by hunterthomson (2008-08-10 11:17:47)

Personally..... (this is just how I would have written it - if it works, then it's good enough for me though )
I would change this whole block:
verify="n"
while [ "$verify" != y ]
do
printf "Do you have mbr installed... yes or no?"
read AN1
echo ""
printf "You answered... $AN1 I have installed mbr. Is this correct... y or n?"
read verify
done
echo ""
if [ "$AN1" == "no" ]
then
echo "Install mbr now. Then run this script agin"
exit
else
echo "contunuing script"
fi
To this much shorter code:
MBR='/usr/bin/install-mbr' # Or where ever you expect it to be
if [ ! -x $MBR ] ; then
echo "mbr doesn't appear to be installed."
echo "If it is installed, check it's location, make sure it's executable and then make sure the MBR variable in this script is correct"
exit 1
fi
I wouldn't have used the checkXX variables for each stage:
mkdir ~/usbbiosfiles
if [ $? != 0 ] ; then
#failed
echo "Could not \make directory usbbiosfiles"
echo "look above \for \info"
echo "Fix the problem and run this scrip agin"
exit 1
else
echo "Made directory usbbiosfiles... OK"
fi
There is an issue with the way you do your verifications - the user can never get out unless they answer 'y' or hit CTRL+C. Something like this gives them options:
verify="n"
while [ "$verify" != "y" && "$verify" != "n" ]; do
echo "You need to answer 'y'es or 'n'o"
read verify
echo $verify | tr "[:upper:]" "[:lower:]" # This converts the answer to lowercase so replies entered in upper case will still work
done
if [ $verify != 'y' ] ; then
exit 1
fi
One last thing I try to do in scripts... Declare all your binaries as variables at the start of the program, then execute the binary program by using the variable. For example:
# Binaries
TAR='/bin/tar'
CP='/bin/cp'
CHMOD='/bin/chmod'
# Execute tar and chmod the created file
$TAR cvzf /tmp/tarfile.tar.gz /etc/*.conf
$CHMOD 400 /etc/*.conf
This way, it's easy to change the path in future without having to hunt through the script if the paths change, and it also ensures you're calling the programs using the full paths to make sure you're not executing some strange variant or alias that someone has setup. If I use `chmod` 30 times in a script, and the path changes in the future or on a different system (`chmod` is a bad example cause it's highly unlikely to change, but you know what I mean), then all you need to do is update the variable at the start of the script, and it all works again without having to script-hunt and change it 30 times.

Adobe Story Script integration with Premiere Pro Doesnt allow me to embed the script

Goal: Embed an Adobe Story Script into Premiere Pro. (mac)
Method: I have a video with a verbatim transcript.
I inport the transcript into Adobe Story and save it in the proper Adobe Story File extension (.astx)
I save it to the Adobe cloud and I have also exported it to my desktop.
I launch Premiere Pro and import the video that I have transcribed.
The I try one of 3 ways to get the script to the video in PP.
The first steps are the same as below:
I go to Adobe Story and log in from within PP.
I locate the file.
I add a Scene.
I make sure the scene is the same as it is within PP
then...
1.
I drag and drop it onto the Movie file.
Nothing appears within the Embed Adobe Story Script Meta Data field.
2.
I click on Analyze and the Embed Adobe Story Script script checkbox remains greyed out (Unable to select it)
If I click Analyze then PP will analyze the script (does a decent job) but this is NOT what I want. I want to attach the verbatim script to the video which is why I have it transcribed.
3.
Right click on the movie file within PP and the contextual menu allows me to attach a script.
I locate my downloaded .astx file on my Mac and select it.
Still nothing appears within the Embed Adobe Story Metadata field.
I have worked with Anand from support who suggested I post this question here.
I dont know if there are only certain Adobe templates for which this will work (ie TV script, Film etc)
He suggested that this would most likely work only for the .mov file formats, but then discovered that it should work even for .mp4 files.
In any case - if anyone has any thoughts, ideas, or has experience with this It would be greatly appreciated.
Jon
17 Views Tags: premiere proContent tagged with premiere pro, adobe story scriptContent tagged with adobe story script, embed adobe story script into premiere proContent tagged with embed adobe story script into premiere pro
Translate

You need to ask in Adobe Story and/or http://forums.adobe.com/community/premiere/content
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

About the template FSCM9.1 FP2 Peopletools 8.52.03 (v4 - July 2012)

Hello,
Just tested quickly this new template delivered 2 months ago (July 2012).
As far as I undestand, it is just a recut of the one delivered in April 2012. At least it solves the main issue I reported in that other About the template FSCM9.1 FP2 Peopletools 8.52.03 (v3) about the network prompt missing.
But I still have remarks/issues on the template FSCM9.1 FP2 Peopletools 8.52.03 (v4) released earlier in July 2012.
_1. First of all, there a lot of errors reported in /var/log/messages_
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.883:3): avc: denied { read } for pid=92 comm="restorecon" name="libc.so.6" dev=xvda2 ino=21 scontext=system_u:sys
tem_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526918.910:4): avc: denied { execute } for pid=92 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:5): avc: denied { read } for pid=296 comm="pam_console_app" name="ld.so.cache" dev=xvda2 ino=94143 scontext=s
ystem_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.489:6): avc: denied { getattr } for pid=290 comm="pam_console_app" path="/etc/ld.so.cache" dev=xvda2 ino=94143 sc
ontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:7): avc: denied { read } for pid=293 comm="pam_console_app" name="libc.so.6" dev=xvda2 ino=21 scontext=system
_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=lnk_file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526921.530:8): avc: denied { execute } for pid=293 comm="pam_console_app" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 sco
ntext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: input: PC Speaker as /class/input/input3
Sep 13 05:02:55 localhost kernel: Initialising Xen virtual ethernet driver.
Sep 13 05:02:55 localhost kernel: Error: Driver 'pcspkr' is already registered, aborting...
Sep 13 05:02:55 localhost kernel: Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
Sep 13 05:02:55 localhost kernel: floppy0: Unable to grab IRQ6 for the floppy driver
Sep 13 05:02:55 localhost kernel: lp: driver loaded but no devices found
Sep 13 05:02:55 localhost kernel: md: Autodetecting RAID arrays.
Sep 13 05:02:55 localhost kernel: md: Scanned 0 and added 0 devices.
Sep 13 05:02:55 localhost kernel: md: autorun ...
Sep 13 05:02:55 localhost kernel: md: ... autorun DONE.
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda2, internal journal
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526929.896:9): avc: denied { execute } for pid=965 comm="restorecon" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext
=system_u:system_r:restorecon_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvda1, internal journal
Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 05:02:55 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 13 05:02:55 localhost kernel: EXT3 FS on xvdb1, internal journal
Sep 13 05:02:55 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526930.647:10): avc: denied { execute } for pid=989 comm="setfiles" path="/lib64/libc-2.5.so" dev=xvda2 ino=20 scontext=
system_u:system_r:setfiles_t:s0 tcontext=system_u:object_r:file_t:s0 tclass=file
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526942.398:11): avc: denied { net_admin } for pid=990 comm="setfiles" capability=12 scontext=system_u:system_r:setfiles
_t:s0 tcontext=system_u:system_r:setfiles_t:s0 tclass=capability
Sep 13 05:02:55 localhost kernel: hrtimer: interrupt took 35229469 ns
Sep 13 05:02:55 localhost kernel: Adding 2104504k swap on /dev/xvda3. Priority:-1 extents:1 across:2104504k SS
Sep 13 05:02:55 localhost kernel: warning: process `kudzu' used the deprecated sysctl system call with 1.23.
Sep 13 05:02:55 localhost kernel: Loading iSCSI transport class v2.0-870.
Sep 13 05:02:55 localhost kernel: libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Sep 13 05:02:55 localhost kernel: libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Sep 13 05:02:55 localhost kernel: Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (cxgb3i)
Sep 13 05:02:55 localhost kernel: NET: Registered protocol family 10
Sep 13 05:02:55 localhost kernel: cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011)
Sep 13 05:02:55 localhost kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Jan 06, 2010)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (bnx2i)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (tcp)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (iser)
Sep 13 05:02:55 localhost kernel: iscsi: registered transport (be2iscsi)
Sep 13 05:02:55 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Sep 13 05:02:55 localhost kernel: warning: `mcstransd' uses 32-bit capabilities (legacy support in use)
Sep 13 05:02:55 localhost kernel: type=1400 audit(1347526970.336:12): avc: denied { sys_tty_config } for pid=1374 comm="consoletype" capability=26 scontext=system_u:system_r
:consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
Sep 13 05:02:55 localhost kernel: RPC: Registered udp transport module.
Sep 13 05:02:55 localhost kernel: RPC: Registered tcp transport module.
Sep 13 05:02:55 localhost kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Sep 13 05:03:00 localhost automount[1769]: lookup_read_master: lookup(nisplus): couldn't locate nis+ table auto.master
Sep 13 05:03:59 localhost kernel: type=1400 audit(1347527039.771:13): avc: denied { sys_tty_config } for pid=2029 comm="consoletype" capability=26 scontext=system_u:system_r
:consoletype_t:s0 tcontext=system_u:system_r:consoletype_t:s0 tclass=capability
Sep 13 05:04:00 localhost NET[2061]: /sbin/dhclient-script : updated /etc/resolv.conf
Sep 13 05:04:01 localhost kernel: IPv6 over IPv4 tunneling driver
Sep 13 05:04:01 localhost NET[2219]: /opt/oracle/psft/vm/oraclevm-template.sh : updated /etc/resolv.conf
Sep 13 05:04:08 localhost NET[2472]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
Sep 13 05:06:08 localhost restorecond: Reset file context /etc/resolv.conf: system_u:object_r:etc_runtime_t:s0->system_u:object_r:net_conf_t:s0
Sep 13 05:08:19 localhost kernel: Slow work thread pool: Starting up
Sep 13 05:08:19 localhost kernel: Slow work thread pool: Ready
Sep 13 05:08:19 localhost kernel: FS-Cache: Loaded
Sep 13 05:08:19 localhost kernel: FS-Cache: Netfs 'nfs' registered for caching
Sep 13 05:08:19 localhost kernel: svc: failed to register lockdv1 RPC service (errno 97).
...Well, I don't know if it triggers others problems yet, but the last line could reveale an error within the /etc/hosts file which has not been properly modified during deployment (especially IPV6, it probably should be removed) :
[root@psovmfscmfp2 /]# more /etc/hosts
127.0.0.1       localhost.localdomain   localhost
::1     localhost6.localdomain6 localhost6
192.168.1.150   psovmfscmfp2.phoenix.nga psovmfscmfp2
[root@psovmfscmfp2 /]#_2. Now about the COBOL_
Despite I choosed to install Microfocus, COBOL does not work. Sample COBOL processes such as PTPDBTST and PTPDTTST finished in error.
The log is empty, here below the output from the file $PS_CFG_HOME/psft/pt/8.52/appserv/prcs/PRCSDOM/LOGS/stdout (psadm2) :
=================================Error===============================
Message:     Process 10899 is marked 'Initiated' or 'Processing' but can not detect status of PID
        Process Name: PTPDBTST
        Process Type: COBOL SQL
        Session Id:   9313
=====================================================================
OprId = VP1Note that I successfully tested AEs and SQRs.
Here is the command line fired that I can see from the process monitor > parameter (nga is being my run control id) :
PSRUN PTPDBTST ORACLE/F91TMPLT/VP1/OPRPSWD/nga/10899//0 I used the following trace setting on the PTPDBTST's process parameter (override) to see what happens :
%%DBTYPE%%/%%DBNAME%%/%%OPRID%%/%%OPRPSWD%%/%%RUNCNTLID%%/%%INSTANCE%%//%%DBFLAG%%But it does not generate more logs...
I also use "RCCBL Redirect =1" in psappsrv.cfg (reconfigure and restart appdom), then start the COBOL through menu PeopleTools > Utilities > Debug > PeopleTools Test Utilities, and run a "Remote Call Test".
I received "COBOL Program PTPNTEST aborted (2,-1) FUNCLIB_UTIL.RC_TEST_PB.FieldChange PCPC:2143 Statement:26", but it generated two empty files (PTPNTEST_VP1_0913064910.out and PTPNTEST_VP1_0913064910.err).
Next step, checking the folder $PS_HOME/cblbin, it is...er... empty... does this mean COBOL have not been compiled ? Hmmm, I'm pretty sure I replied 'yes' when it was prompted though (still have the screenshots)...
And we can see several folders dated from today and license seems ok from Microfocus directories :
[psadm1@psovmfscmfp2 tools]$ cd /opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ ls -lrt
total 264
-r--r--r-- 1 root root 10455 Nov 19 2009 ADISCTRL
dr-xr-xr-x 10 root root 4096 Nov 19 2009 terminfo
dr-xr-xr-x 2 root root 4096 Nov 19 2009 xdb
-r--r--r-- 1 root root 11949 Nov 19 2009 eslmf-mess
dr-xr-xr-x 2 root root 4096 Nov 19 2009 include
dr-xr-xr-x 17 root root 4096 Nov 19 2009 lang
dr-xr-xr-x 4 root root 4096 Nov 19 2009 es
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dynload
drwxrwxrwx 2 root root 4096 Nov 19 2009 deploy
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dynload64
dr-xr-xr-x 2 root root 4096 Nov 19 2009 dialog
dr-xr-xr-x 2 root root 4096 Nov 19 2009 cpylib
dr-xr-xr-x 8 root root 28672 Nov 19 2009 lib
dr-xr-xr-x 3 root root 4096 Nov 19 2009 snmp
dr-xr-xr-x 8 root root 4096 Nov 19 2009 src
dr-xr-xr-x 28 root root 4096 Nov 19 2009 demo
dr-xr-xr-x 6 root root 4096 Nov 19 2009 docs
-rw-r--r-- 1 root root    49 Sep 13 05:13 license.txt
-r-xr-xr-x 1 root root 12719 Sep 13 05:13 install.orig
-r-xr-xr-x 1 root root 13006 Sep 13 05:13 install
dr-xr-xr-x 6 root root 4096 Sep 13 05:13 lmf
dr-xr-xr-x 2 root root 4096 Sep 13 05:13 aslmf
dr-xr-xr-x 6 root root 4096 Sep 13 05:15 etc
dr-xr-xr-x 4 root root 12288 Sep 13 05:15 bin
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ more license.txt
I
ORACLE-30DAYDEV64
01030 A0780 014A6 7980B A17CSo let's assume it has been properly installed and let's compile the COBOLs. Here we go :
[psadm1@psovmfscmfp2 svrexp-51_wp4-64bit]$ cd $PS_HOME/setup
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
     Source: /opt/oracle/psft/pt/tools/src/cbl/
     Target: /opt/oracle/psft/pt/tools/src/cblunicode/
      Number of Copy Libraries Read: 71
                     Modified:       71
                 Not Modified:       0
      Number of Programs Read:       44
                     Modified:       44
                 Not Modified:       0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak: line 249: cob: command not found
cp: cannot stat `PTPCBLAE.gnt': No such file or directory
cp: cannot stat `PTPCBLAE.int': No such file or directory
cp: cannot stat `PTPCBLAE.lst': No such file or directory
...What about env. variables ? COBDIR, COBPATH and COBOL do not appears anywhere in PATH...
[psadm1@psovmfscmfp2 setup]$ env|grep -i cobol
[psadm1@psovmfscmfp2 setup]$Let's set the env variables as we could expect to be (page 27, step 17 of the given doc), and retry to compile the COBOL :
[psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
[psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
     Source: /opt/oracle/psft/pt/tools/src/cbl/
     Target: /opt/oracle/psft/pt/tools/src/cblunicode/
      Number of Copy Libraries Read: 71
                     Modified:       71
                 Not Modified:       0
      Number of Programs Read:       44
                     Modified:       44
                 Not Modified:       0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
Micro Focus LMF - 010: Unable to contact license manager.                                                                                                                              This product has been unable to contact the                                     License Manager.                                                                                                                                                Execution of this product has been terminated.                                                                                                                  This product cannot execute without the License                                 Manager. Contact your license administrator                                     or refer to the 'Information Messages' chapter                                  of the License Management Facility                                              Administrator's Guide.
cob64: error(s) in compilation: PTPCBLAE.cbl
cp: cannot stat `PTPCBLAE.gnt': No such file or directory
cp: cannot stat `PTPCBLAE.int': No such file or directory
cp: cannot stat `PTPCBLAE.lst': No such file or directory
...Ok, maybe a bit better, at least it is trying to contact LMF. Probably the LMF is not started. Let's try to start it :
[root@psovmfscmfp2 microfocus]# ./mflmman
MF-LMF:Thu Sep 13 07:19:37 2012: LMF Starting
[root@psovmfscmfp2 microfocus]#Good, it is starting, it means it wasn't (sic). Now retry to compile :
[psadm1@psovmfscmfp2 setup]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm1@psovmfscmfp2 setup]$ export LD_LIBRARY_PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/lib:$LD_LIBRARY_PATH
[psadm1@psovmfscmfp2 setup]$ export PATH=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:$PATH
[psadm1@psovmfscmfp2 setup]$ ./pscbl.mak
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Convert all files for Unicode ....
Conversion Summary for Source Codes in :
     Source: /opt/oracle/psft/pt/tools/src/cbl/
     Target: /opt/oracle/psft/pt/tools/src/cblunicode/
      Number of Copy Libraries Read: 71
                     Modified:       71
                 Not Modified:       0
      Number of Programs Read:       44
                     Modified:       44
                 Not Modified:       0
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL files were converted for Unicode successfully
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCBLAE.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPCURND.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPDBTST.cbl ...
<snipped>
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : Compiling PTPWLGEN.cbl ...
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : All COBOL programs have been successfully compiled.
/opt/oracle/psft/pt/tools/setup/pscbl_mf.mak : The COBOL executables were copied to /opt/oracle/psft/pt/tools/cblbin
rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLP1.cbl': Permission denied
rm: cannot remove `/opt/oracle/psft/pt/apptools/src/cblunicode/CECCRLUP.cbl': Permission deniedIt looks better, I think the last lines marked with "Permission denied" can be safely be ignored.
Those files are owned by psadm3 with a read only for other users (sic). But more concern, I'm wondering why it looks into apptools (???) whereas I'm using psadm1 (tools only, COBPATH=/opt/oracle/psft/pt/tools/cblbin).
Anyway, seems the *.gnt files required to run the COBOLs programs are now in bin :
[psadm1@psovmfscmfp2 setup]$ ls /opt/oracle/psft/pt/tools/cblbin
PTPCBLAE.gnt PTPDTTST.gnt PTPECOBL.gnt PTPLOGMS.gnt PTPRATES.gnt PTPSQLGS.gnt PTPTESTU.gnt PTPTSCNT.gnt PTPTSLOG.gnt PTPTSTBL.gnt PTPTSWHR.gnt
PTPCURND.gnt PTPDTWRK.gnt PTPEFCNV.gnt PTPMETAS.gnt PTPRUNID.gnt PTPSQLRT.gnt PTPTESTV.gnt PTPTSEDS.gnt PTPTSREQ.gnt PTPTSUPD.gnt PTPUPPER.gnt
PTPDBTST.gnt PTPDYSQL.gnt PTPERCUR.gnt PTPNETRT.gnt PTPSETAD.gnt PTPSTRFN.gnt PTPTFLDW.gnt PTPTSEDT.gnt PTPTSSET.gnt PTPTSUSE.gnt PTPUSTAT.gnt
PTPDEC31.gnt PTPECACH.gnt PTPESLCT.gnt PTPNTEST.gnt PTPSHARE.gnt PTPTEDIT.gnt PTPTLREC.gnt PTPTSFLD.gnt PTPTSTAE.gnt PTPTSWHE.gnt PTPWLGEN.gnt
[psadm1@psovmfscmfp2 setup]$Have a try to link COBOLs :
[psadm1@psovmfscmfp2 setup]$ ./psrun.mak
./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
./psrun.mak - Successfully created PSRUN in directory: /opt/oracle/psft/pt/tools/bin
./psrun.mak - linking PSRUNRMT for oel-5-x86_64, Version 2.6.32-200.13.1.el5uek ...
./psrun.mak - Successfully created PSRUNRMT in directory: /opt/oracle/psft/pt/tools/bin
[psadm1@psovmfscmfp2 setup]$The err files are empty :
-rw-r--r-- 1 psadm1 oracle     0 Sep 13 07:26 psrun.err
-rw-r--r-- 1 psadm1 oracle     0 Sep 13 07:26 psrunrmt.errSo far, so good now. We are able to test again the sample COBOL... until next failure.
Yes, unfortunately, it fails again. But good thing, the log is not empty now :
PSRUN: error while loading shared libraries: libcobrts64.so: cannot open shared object file: No such file or directoryThat's probably coming from some missing libraries during the psprcs.cfg configuration. Let's use the same env. variables settings as for psadm1 when compiling COBOLs.
[psadm2@psovmfscmfp2 appserv]$ export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
[psadm2@psovmfscmfp2 appserv]$ export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
[psadm2@psovmfscmfp2 appserv]$ export PATH=$COBDIR/bin:$PATH
[psadm2@psovmfscmfp2 appserv]$ ./psadminReconfigure, restart prcs and re-test... SUCCESSFULLY !!!!!!!!!!!!!!!!!!!!!!!!!
Log from PTPDBTST process shows :
SUCCESSFUL DATABASE CONNECTION
SUCCESSFUL DATABASE DISCONNECTWhat a pain !
I did not go further, but we could expect the same issue within the Application COBOLs, since the cblbin directory is also empty out there.
According to psprcs.env, there're two values for COBDIR and the one for the applications cobol is empty :
[psadm2@psovmfscmfp2 PRCSDOM]$ more psprcsrv.env
INFORMIXSERVER=192.168.1.149
COBPATH=/opt/oracle/psft/pt/apptools/cblbin:/opt/oracle/psft/pt/tools/cblbin
PATH=/opt/oracle/psft/pt/apptools/bin:/opt/oracle/psft/pt/apptools/bin/interfacedrivers::/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit/bin:/opt/oracle/psft/pt/tools/appserv:/opt
/oracle/psft/pt/tools/setup:/opt/oracle/psft/pt/tools/jre/bin:/opt/oracle/psft/pt/bea/tuxedo/bin:.:/opt/oracle/psft/pt/oracle-client/11.2.0.x/bin:/opt/oracle/psft/pt/oracle-clie
nt/11.2.0.x/perl/bin:/usr/local/bin:/bin:/usr/bin:/opt/oracle/psft/pt/tools/bin:/opt/oracle/psft/pt/tools/bin/sqr/ORA/bin:/opt/oracle/psft/pt/tools/verity/linux/_ilnx21/bin:/hom
e/psadm2/bin:.
[psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/apptools/cblbin
[psadm2@psovmfscmfp2 PRCSDOM]$ ls /opt/oracle/psft/pt/tools/cblbin
PTPCBLAE.gnt PTPDTTST.gnt PTPECOBL.gnt PTPLOGMS.gnt PTPRATES.gnt PTPSQLGS.gnt PTPTESTU.gnt PTPTSCNT.gnt PTPTSLOG.gnt PTPTSTBL.gnt PTPTSWHR.gnt
PTPCURND.gnt PTPDTWRK.gnt PTPEFCNV.gnt PTPMETAS.gnt PTPRUNID.gnt PTPSQLRT.gnt PTPTESTV.gnt PTPTSEDS.gnt PTPTSREQ.gnt PTPTSUPD.gnt PTPUPPER.gnt
PTPDBTST.gnt PTPDYSQL.gnt PTPERCUR.gnt PTPNETRT.gnt PTPSETAD.gnt PTPSTRFN.gnt PTPTFLDW.gnt PTPTSEDT.gnt PTPTSSET.gnt PTPTSUSE.gnt PTPUSTAT.gnt
PTPDEC31.gnt PTPECACH.gnt PTPESLCT.gnt PTPNTEST.gnt PTPSHARE.gnt PTPTEDIT.gnt PTPTLREC.gnt PTPTSFLD.gnt PTPTSTAE.gnt PTPTSWHE.gnt PTPWLGEN.gnt
[psadm2@psovmfscmfp2 PRCSDOM]$The directory "/opt/oracle/psft/pt/apptools/cblbin" is owned by psadm3 and hosted on the database server (nfs mounted), so I assume we also need to set proper values for env variables, and compile the COBOLs before being able to use them.
To resume what I did to make the COBOLs working on this PSOVM :
1. As root, start LMF (this has to be done only once)
cd /opt/oracle/psft/pt/cobol/microfocus
./mflmman
2. As psadm1, set proper env. variable and compile (setting env variable has to be done each time you want to compile COBOLs)
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
export PATH=$COBDIR/bin:$PATH
cd $PS_HOME/setup
./pscbl.mak
./psrun.mak
3. As psadm2, set proper env. variable and reconfigure psprcs.cfg, restart, restart (setting env variable has to be done each time you want to start the process scheduler, so probably better to append these in the .bash_profile)
export COBDIR=/opt/oracle/psft/pt/cobol/svrexp-51_wp4-64bit
export LD_LIBRARY_PATH=$COBDIR/lib:$LD_LIBRARY_PATH
export PATH=$COBDIR/bin:$PATH
cd $PS_HOME/appserv
./psadmin
4. Same as step 2, but with user psadm3.
HTH,
Nicolas.
PS: will it be the same issue on the HCM template delivered at the same time ? To be tested as well.
PS2: and yes, I tested it twice before posting, result is same.
Edited by: N Gasparotto on Sep 13, 2012 5:17 PM

Fortunately, the COBOL issue does not exist on PSOVM HCM9.1 FP2 PT8.52.06 delivered in July 2012 (v3). COBOL are properly compiled (tools and app COBOLs), cblbin is not empty and they run successfully on the first shot.
Nicolas.

Data access error while running the script in fdm workbench script editor

Hello Experts,
I have been getting the error when i run the script in script editor of fdqm workbench client.this is the error
                          -2147467259 Data access error and it is navigating the error at line 30 about this script "Set rsAppend = DW.DataAccess.farsTable(strWorkTableName)"
Please revert me asap where i should load the data from peoplesoft to one of my planning database through fdm.
Thanks in advance...

Hi,
Thanks for your suggestion's here i am going to run the datapump script so while i am running in workbench it is throwing data access error.So as you guy's suggested i created one import format and added this script to that import format which is added to one of my location even it is throwing the same error.I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?So my question is Is there any difference while running data pump or integration script.Please let me know a detailed navigation steps to run this script's with out data access error to run these kind of scripts.
Note:Again my target is to load the data to planning database through fdqm which i am doing through sql statement's.
Suggest your valuable suggestion's
Thanks in advance...
I am getting the error at this sentence   "strWorkTableName" I want to know what is this where it reflect's?

Know more detail about the Remote Support Platform for SAP Business One ?

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
Enhancements planned in Remote Support Platform for SAP Business One 9.1
RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
RSP Processes and Reports adapted to SAP HANA Database
With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
What is Remote Support Platform for SAP Business One?
The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
Some Key Features of Remote Support Platform:
Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
Incident Reports against the issues identified which require attention of SAP Support
Company Database Backup and Restore options
Regular fixes of Company Database inconsistencies
Check, Download and Install regular updates in SAP Business One
Upload Logs and required files to SAP Support or to Partner Support on regular basis
Some details about RSP Backup Management
Schedule daily, weekly, and monthly backups
Perform differential and full database backups
Back up transaction logs
Back up files to shared folders on a network
System Status Report through RSP
From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
Database uploads only via RSP
From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
Microsoft Windows PowerShell Scripting
In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
To achieve the internet connection test, you must allow port 80 for the RSP external communication
Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
Set the correct proxy
Disabling Windows firewall in the TP_link Wireless Configuration Utility
Want to now More about It Click Here :   Remote Support Platform for SAP Business One

Can you point me to FrameScript samples that do some or all of the following? Or maybe even write the script for me for $$$? :-)

Hi,
I'm brand new to writing FrameScript. I'm looking for example scripts that I can piece together or perhaps you can give me a quote for your cost to write the script for me. Here is a description of basically what needs doing. We have .book files than contain say a cover.fm, multiple chapter.fms, and possibly multiple appendix.fms. (They actually contain more types, but I can expand the script for that.) I don't think here is a consistent way to automatically determine which .fms are of which type, so I was thinking of popping up a dialog box that showed the files in the book and asked the user to identify which files were of which type. This asking could be done all at once, or it could iteratively ask for the first type then run all the processing then ask for the second type, etc, etc.
The processing of each file goes like this:
1) Delete the paragraph and character catalog contents
2) Import all formats, including the new paragraph and character catalogs from correct template file (chapter.fm, appendix.fm, etc)
3) Remap the old paragraph and character tags to the new ones, preferably based on an internal predefined, hard-coded table, but possibly using the "use a remapping table that is in another .fm file" method. It's just that the latter method requires the user to open two more .fms in addition to the several other template files they'll already (correct?) have to have open.
4) Report to the user all tags that are in their file that are not in the new catalogs
Can you point me to pieces? Write the whole thing? Recommend someone who can?
Thanks,
Dave

Dave, if you haven't yet check it out, do visit the Framescript users group, here:
http://groups.yahoo.com/group/framescript-users/
There are several folks who do contract FS work who post their contact info as part of that group (I believe there's a webring also). Also, Rick Quatro has a good e-book "Crash Course" about learning FrameScript (although the book refers to an earlier version, almost all of the concepts are still applicable to the current versions of FS and FM) , check it out at
http://www.frameexpert.com
Sheila

How to avoid missing font dialog box(alert) while running the script??

Hi....
     In Illustrator CS4 ,I tried to skip missing font dialog box(alert box) by using the following script .But,I could not skip the dialog box
So if you have any suggestion about this let me know..
tell application "Finder"
set user interaction level to never interact
    activate
    set fileName to (path to desktop folder as string) & "fer11757_f1208.eps"
    --set user interaction level to never interact
    --    set user interaction level of script preferences to never interact
    open file fileName
    --set alert missing fonts to true
    set user interaction level to never interact
    activate
end tell
display dialog ("completed")
end tell
Thanks,
Mubeen

Does this NOT error when run? Your target application here is 'Finder' Apple's system file browser and you are giving it Adobe illustrator commands?
Im not 100% about the versioning with Illustrator installs I think they are all just…
Tell application "Adobe Illustrator" -- No CS Versioning?
     -- do stuff here
end tell
you could check by just picking the app from this list
choose application

Adobe Story Script doesn't allow me to embed the script in Premiere Pro

Adobe Story Script integration with Premiere Pro Doesnt allow me to embed the script
Goal: Embed an Adobe Story Script into Premiere Pro. (mac)
Method: I have a video with a verbatim transcript.
I inport the transcript into Adobe Story and save it in the proper Adobe Story File extension (.astx)
I save it to the Adobe cloud and I have also exported it to my desktop.
I launch Premiere Pro and import the video that I have transcribed.
The I try one of 3 ways to get the script to the video in PP.
The first steps are the same as below:
I go to Adobe Story and log in from within PP.
I locate the file.
I add a Scene.
I make sure the scene is the same as it is within PP
then...
1.
I drag and drop it onto the Movie file.
Nothing appears within the Embed Adobe Story Script Meta Data field.
2.
I click on Analyze and the Embed Adobe Story Script script checkbox remains greyed out (Unable to select it)
If I click Analyze then PP will analyze the script (does a decent job) but this is NOT what I want. I want to attach the verbatim script to the video which is why I have it transcribed.
3.
Right click on the movie file within PP and the contextual menu allows me to attach a script.
I locate my downloaded .astx file on my Mac and select it.
Still nothing appears within the Embed Adobe Story Metadata field.
I have worked with Anand from support who suggested I post this question here.
I dont know if there are only certain Adobe templates for which this will work (ie TV script, Film etc)
He suggested that this would most likely work only for the .mov file formats, but then discovered that it should work even for .mp4 files.
In any case - if anyone has any thoughts, ideas, or has experience with this It would be greatly appreciated.
Jon
17 Views Tags: premiere proContent tagged with premiere pro, adobe story scriptContent tagged with adobe story script, embed adobe story script into premiere proContent tagged with embed adobe story script into premiere pro
Translate

Hi!
I'm getting crazy on this. I'm following the worflow suggested in the video (create a script in Story with the clip transfer, import the clip to Premier, dragging the script to the clip). The clip has the scene number corresponding to the script.
Unfortunately, nothing happens. The "attached script" is empty. And if I do the spech analysis it takes a lot of time (about three times as the original video, although I'm trying to suply a literal transcript).
BTW, what I'm trying to do is to edit the videos from the scripts. I'm working on a documentary, with a lot of footage (30 x 2hs interviews). If I can create the script combining pieces of the inverviews in Story, and then importing it into Premiere. Anybody done something similar?

About the script......

Similar Messages

Maybe you are looking for