AC1750 update failed, router no longer works, way to reset it?

I have an AC1750 that someone tried to update the firmware on, and something happened during the update process so now it no longer works. Is there a way to reinstall a fresh copy of the firmware to get it working again?

I believe, they were referring to the power light, that's the Cisco Logo on the top of the router. It should stay solid or stable. If the lights are still flashing, then you may need to flash the firmware.

Similar Messages

HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

Mac Yosemite 10.10.2 -- System Pref. Java pane/ctrl-panel, Update-tab-function no-longer works, after updting to Java 8v40

Under the Mac Yosemite 10.10.2 O.S. -- the System Preferences: Java pane/ctrl-panel: Update-tab-function no-longer works, after updting to Java 8v40 JRE & SDK -- says that the internet connection is not valid !

A few questions....I assume your network is connected to the Internet? Do you use a proxy? If so, is it set in the browser or in the Java Control Panel?
-Roger

Since the update my password no longer works only on apple tv

Since the update my password no longer works on apple tv

Cute. I redid my apple password last nite and made it real simple. It worked fine signing in to the forum just now. When I use it to sign in on Apple TV I keep getting message. ' server not available'. I had gotten it to sign in earlier but netflix wouldn't play the movie. Just the previews. So I reset everything and tried to start over and I can't log on at all. So if you have any helpful suggestions I would be interested in hearing them. Thank you

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

Linksys router no longer works with Westell 6100 modem

Hi all,
I came back after a 3 month work absence (and many days power outages, according to the neighbors), to find that my system can no longer connect to the internet using the Verizon Westell 6100 modem to a Linksys wrt54G router to 2 PCs!
I reset the Westell modem and directly connected the PC to it and THAT works okay, but put the router back in the mix (so I can connect my other PC) and nothing works!
I have read on this forum about 'Bridgeing" the Westell modem but nothing about setting up the router.
Can someone PLEASE give me explicit instructions on how to:
    1.) set up the Westell modem in this "Bridge" mode,
    2.) Set up the Linksys router to work with the modem again??
    3.) Tell me why the old setup no longer works, did verizon change something for this modem?
Thank you VERY much for your help in this matter!
SUE ;>)

the router has two connections. one is called a WAN and that is a wide area network, and it means the internet in your case. and one is called a LAN, local area network.
what you saw means - that the way you connect to your internet is through PPPoE, a username and a password.
and then way your LAN connects is DHCP, how all of your local computers connect. This is important, because after you bridge the westell, you will be setting your Linksys up for PPPoE connection, and NOT DHCP. if you don't do this step, then you will never connect.
that is fine, and normal. if you follow the instructions at the link provided - you will be able to connect real easily.
you will want to bridge the westell just follow the instructions for "If your Westell uses the red and black Verizon firmware:"

After Flash Player 10.1 update, BitmapData copying no longer works?

Hi,
I recently updated to the 10.1 flash player. However, after the update - none of the application within which I'm using the BitmapData class (AS 2.0) work anymore. The source graphic loads fine, but the .draw procedure that used to work fine no longer works at all.
I'm definately not alone on this issue, as a number of my colleagues in the office have reported the same behaviour. Once I uninstalled the 10.1 update and reinstalled an older version 9.x update, the BitmapData copying works fine again.
Bit stumped on this one. Anyone else experiencing this issue?
An example of one of the SWFs that use this facility is shown at the top of the page here (in the grey box area):
http://www.southeastfarmmachinery.net/
Here's a screengrab of the issue in question:
I'm running Windows 7 (32bit), this issue seems to affect Flash Player in all browsers (tested in IE 7, IE 8, Firefox, I haven't got around to testing it in Chrome, Safari or Opera etc..).
Any help would be appreciated, thanks!
Andy

Thanks for the reply, but I think the problem isn't as simple as you suggest.
Firstly, I'm not sure why I would need to update my video drivers to the latest version, when clearly this functionality was working 100% correctly before the Flash Player update. And on this same note - what about the many devices that run OEM hardware (i.e. laptops) that have pre-baked drivers that are never updated? (Thanks, nVidia!)
Secondly, I'm pretty surprised that the suggestion was made to disable hardware acceleration. Why would this be necessary? I understand that Flash Player ties into the GPU for some tasks - but as far as I'm aware, the visuals we working in one version (presumably with the default hardware acceleration enabled), and now - they are not. Does this imply specific changes to the hardware acceleration code used in Flash? Or is it, as I suspect, a more serious problem with a fixed-bug that has unravelled another part of the player.
The main issue I have here is that we now have many clients complaining that their flash clips we've made (that use similar functionality as that linked to above) no longer work - and they see the same white screen.
I appreciate your insights here - but you must appreciate that we can't just start emailing all our clients saying, "Oh, by the way - can you go into 'x' control panel and disable your flash hardware acceleration, oh and whilst you're at it - download and install the latest video drivers for your machine.". They'd have a conniption - and we can't expect our clients to just do all of that for the sake of a mistake made by Adobe.
You mentioned that this isn't the right forum for raising these specific issues - although I can see that mostly all bug issues seem to end up here. Would you be so kind as to point out where I should be posting this issue, so that I can bring it to the attention of the right people?
I was hoping more people would notice this, but I appreciate that it's more of a developer-specific problem.
Andy

After iOS 5.0.1 OTA update Siri is no longer working

Anyone having the same issue? Since I updated to 5.0.1 Siri no longer works. All I get is the typical " I'm really sorry about but I can't take any requests right now. Please try again in a little while ".
Any ideas? I've powered off the phone, rebooted the phone a couple of times yesterday. Didn't work. I tried this again this morning and it's not working either.

All was good, My battery and SIRI were working fine, then my bad luck that i updated my phone to iOS 5.0.1 (which is promissing better battery life and Siri funcionality). After updating all went crazy, SIRI is not working any more (it says cant do any thing right now and try later, and i am now trying from 2 days), Battery is not lasting longer then 12 hrs as it was better before. I am seriously thinking to go back to my iPhone 4 and distroy iPhone 4S
APPLE????? i need answers????

Since installing Flash update today, Flash no longer works on FireFox (works fine on IE)

As prompted, Adobe Flash update was installed today. Since installing , Flash no longer works with FireFox (works ok with IE);

Hi guys - for me this helped.
Close Firefox - open Internet Explorer - got to the Adobe Flash Player Site:
http://get.adobe.com/de/flashplayer/
In IE you can see there is the 64-bit version - (in Firefox there was just the 32-bit version) - got to: (others)
http://get.adobe.com/de/flashplayer/otherversions/
choose your system and version
download it via internet explorer and install the adobe flash player
restart firefox and it should work.
helped me after wasting one day of my life to find a solution, alle sites work just fine now.
hope this helps.

Since the 4.4.4 update my camera no longer works.

All I get is a black screen and a message that says camera error please restart. I never had an issue with the camera until this update. It did not work the first time I tried to use it, it failed.

I'm sorry to learn that your camera is not working after latest software update johna0999! This latest update was intended to improve your camera performance. Please do a factory reset http://vz.to/1iKYRcn to ensure that no conflicts exist between the previous version and the latest version of the software and test.
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

After software update usb mouse no longer works.

After software update Microsoft usb mouse no longer works. System Profiler "sees" usb mouse. I took my macbook to the Genius Bar at Apple and they were not able to help. Pretty lame....

any ideas on how to solva this?

Software Update and Installer no longer work

I have a PowerMac G5 tower and a iBook G4. Both were prompted to automatically update to 10.4.11-- my laptop is fine. My PowerMac, however, can no longer launch the Software Installer. I tried downloading 10.4.11 as a standalone to install it, but that is when I discovered the Installer no longer works-- is quits unexpectedly.
Are there any fixes I can try before reinstalling the entire ops system? Or, since I'm toying with the idea of buying Leopard anyway, should I skip the reinstall of Tiger altogether? Thanks in advance for your help!

I seem to be having the same problem. When I download an application (.app) and than click on the box to open it , it shakes for a moment but nothing happens.I have tried a number of different applications with the same result. So there has to be something wrong with the INSTALLER. But then I have the same problem with my disk utility. Thats when I booted up from my CD and used the disk utility there to clean up the permissions and repaired the disk. Every thing worked fine but did not fix the installer or disk utility on the computer.
I am waiting now to see if we get some suggestions before I try an Archive re-install.

Tried to update ipod Touch 4th Generation, Update Failed, iPod won't work

So less than twenty minutes ago I tried to update my iPod touch, knowing it had been asking this for a few days. The update failed, as as of now my iPod Touch is stuck on the picture of the iPod cable with an arrow pointing at the iTunes symbol. I've tried holding the two buttons to force it to shut off, it does- when I turn it on I get the apple logo so I know it turned on, only to get it again. When plugged into my computer, it is not recognized by anything. Going to Computer it doesn't see it as plugged in, and on iTunes nothing comes up with connected objects. This happened to me once in the past and I had to go to the Apple Store to have it fixed... can anyone tell me what to do so I don't have to go to them, or am I gonna have to take some time and drive over to have them take a look at it? Also, when removing my iPod from the computer, i get the sound that you get when you remove something from your computer, meaning it knows it's plugged in, just not reading it for some reason.
Thank you very much to anyone that can help!
If this is posted in the wrong area, this is my first loggin- sorry if I screwed up, mind telling me if I did?
Message was edited by: ShadowSora94

iPod Touch 4G 32GB. I had same problem when I tried updating iOS; iTunes says restoring iPod, but after a while gives error 1603. I tried all suggestions from support: recovery mode, other USB ports, disconnect all other devices, uninstall and reinstall apple s/w and drivers, disable all other services using msconfig, confirm USB are 2.0, re-download updated software, reboot computer, name it! I finally installed iTunes on old Dell Inspiron P4 running XP, plugged iPod in it and device got recovered immediately! Put it back in Win7 computer and performed backup restore. Everything is back as it was. I have no idea what prevents s/w update on main computer. I realized I never get "waiting for iPod" message during attempt to restore, while I do on old Dell. I wonder what triggers this message.

How to update screensaver that no longer works with Leopard or Snow Leopard

Hello. I have a favorite screen saver that would no longer work when I installed Leopard...and it also does not work with Snow Leopard either.
Can anyone tell me if I might be able to fix it and make it Snow Leopard compatible? Could I possibly open it up in Xcode or some other program, and make the appropriate changes?
I also have several iTunes plugins that quit working when Leopard was installed...and I'd like to do the same for them.
Thanks!

atrofix wrote:
Hello. I have a favorite screen saver that would no longer work when I installed Leopard...and it also does not work with Snow Leopard either.
Can anyone tell me if I might be able to fix it and make it Snow Leopard compatible?
check with the vendor of that screensaver to see if there is a SL compatible version.
Could I possibly open it up in Xcode or some other program, and make the appropriate changes?
only if it's an open source screensaver with source code included. impossible otherwise.
I also have several iTunes plugins that quit working when Leopard was installed...and I'd like to do the same for them.
Thanks!

Linksys router no longer working

I have had NO problem swith my linksys router unti I installed the model Westell 6100F. After having to perform a hard reset on the dsl modem to get it to work. I tried to reconnect my router to my network and it will not connect. I can connect to the net directly through the dsl modem but NOT through the router. My router worked for years until Installed this new dsl modem. I am using dhcp with all factory defaults for the router. - has anyone had this problem ?
My router is a Linksys BEFSR41.
Message Edited by fleeteedo on 02-19-2009 05:47 PM
Solved!
Go to Solution.

Thank Provider 7. The next day I noticed that my router and the new dsl modem were using the same address. Off I changed the address of the router and everything worked just fine. For those of you who had the same problem go to the Linksys website and search the FAQ at http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=2243
Although I could have done it by myself there were step by stpe instructions - always nice to make sure you cover all the bases. So everything is working fine. I hope this post helps someone else !

AC1750 update failed, router no longer works, way to reset it?

Similar Messages

Maybe you are looking for