Accelerator http suppress-server-encoding enabled?

Why would WAAS allow compression for content that rarely changes? Wouldn't it make more sense to suppress-compression for that content, take advantage of DRE and WAAS ability to cache that content for branch site browsers to consume? Is there a reason to allow server compression for static content?
Taken from 4.2.1 release notes
Step 11 Check the Suppress server compression check box to configure the WAE to suppress server compression between the client and the server. The default setting is unchecked.
By checking this box, you are telling the WAE to remove the Accept-Encoding value from HTTP request headers, preventing the web server from compressing HTTP data that it sends to the client. This allows the WAE to apply its own compression to the HTTP data, typically resulting in much better compression than the web server for most files. For some file types that rarely change, such as .css and .js files, this setting is ignored and web server compression is allowed.

Hi ,
HTTP Metadata Cache feature will able to optimize only the local HTTP 301 , HTTP 401 and HTTP 304 request.
You can use the HTTP professional software to indentify whether the accessed website has HTTP header request of ( 301,401 and 304) , response time , Request sent, request received and local cache response time.
If you are accessing the HTTPS website then should also enable HTTPS metadata cache feature.
You should clear your browser temporary files whenever you testing this so that you will able to get a exact output.
I hope below mentioned will give you a better idea.
http://docwiki.cisco.com/wiki/Cisco_WAAS_Troubleshooting_Guide_for_Release_4.1.3_and_Later_--_Troubleshooting_the_HTTP_AO
Regards,
Bala

Similar Messages

Dynamic URL for Recv HTTP (Adapter spec attribute enabled)

Hi,
I need to have a dynamic URL for one of my cases been worked. the URL is
httlp://:<host>/perform/XTA?serv=*&action=start
the event "action" can accept either start/stop or restart. i wanna to control this dynamically and went for recv http enabled with adapter specific message attributes. here i had enabled the check box "URL" and in parameter 1 i had given the name as "action".
in my message payload the "action" will be start/stop or restart which is handled by UDF for which the code is below:l
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey trig = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
conf.put(trig,action);
return "";
this udf is mapped to the root node of the target...but when execute the case i get the following error
"Dynamic Header - Missing Message Attributes: URL/HTTP Destination"
when i execute the url
httlp://:<host>/perform/XTA?serv=*&action=start
in browser it works fine and also with fully qualified name in http recv works fine but not with dynamic settings.
any help on it pls?

Hi Prabhu,
Enable Adapter-Specific Message Attributes(ASMA) in receiver HTTP channel.
Dont enable checkboxes for "URL or HTTP Destination".
Enable checkbox "Apply URL Parameters"
for parameter1 textbox give value action
Regards,
Praveen Gujjeti

How to get info on whether the server is enabled and/or running,

I'm posting this for a customer who has been testing the capabilities of Business Intelligence Platform RESTful Web Service.
We're currently at 4.1 SP2 Patch09. But it seems that we're not being able to get the information that we need. For example a call to http://myBIserver:6405/biprws/infostore/16/children is giving us information about servers such as name or description but it is not telling us whether the server is enabled and/or running, what is the process ID etc.. The JSON response for the above request is:
{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/16\/children?page=1&pageSize=50"},"first":{"__deferred":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/16\/children?page=1&pageSize=50"}},"next":{"__deferred":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/16\/children?page=2&pageSize=50"}},"last":{"__deferred":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/16\/children?page=2&pageSize=50"}},"entries":[{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1207"},"id":1207,"cuid":"Aeodv.WAuUhDjuLGQvxTyHw","description":"Adaptive Job Server","name":"PHLBOBIT01.AdaptiveJobServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7581"},"id":7581,"cuid":"AZGIF9vdegFFvk5MZNe._qU","description":"Adaptive Processing Server - Analysis","name":"PHLBOBIT01.APS.Analysis","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/4388704"},"id":4388704,"cuid":"AZL..77cHkhBh1gDQowM.fE","description":"","name":"PHLBOBIT01.APS.AnalysisApplication","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7478"},"id":7478,"cuid":"AYctUCKuCVBHn4oSDhQPQb4","description":"Adaptive Processing Server - Auditing","name":"PHLBOBIT01.APS.Auditing","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7477"},"id":7477,"cuid":"AaEMaMZd2AdMhm8z0qkrTnM","description":"Adaptive Processing Server - Core Services","name":"PHLBOBIT01.APS.Core","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7583"},"id":7583,"cuid":"AVp8Kq3mrYNCrWB83j2PEvQ","description":"Adaptive Processing Server - Data Access","name":"PHLBOBIT01.APS.DataAccess","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7580"},"id":7580,"cuid":"AXWBe54kOCpOg_mbxUr8Ivo","description":"Adaptive Processing Server - Lifecycle Management","name":"PHLBOBIT01.APS.LCM","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7479"},"id":7479,"cuid":"Af7OI9uF6O5JtR9n1oSO0wc","description":"Adaptive Processing Server - Search","name":"PHLBOBIT01.APS.Search","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7582"},"id":7582,"cuid":"AW1EMWgpDfFImvzDF.Iqwik","description":"Adaptive Processing Server - Web Intelligence","name":"PHLBOBIT01.APS.WebI","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/791"},"id":791,"cuid":"AST6mA7FF.VDvrKpYQACO.E","description":"Central Management Server","name":"PHLBOBIT01.CentralManagementServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/3917458"},"id":3917458,"cuid":"Aeo5YKWfzgVKo5DwN4NaG9A","description":"Connection Server","name":"PHLBOBIT01.ConnectionServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/3917459"},"id":3917459,"cuid":"AZ3w6cEAUWlEiB5j6mB0CWw","description":"Connection Server (32-bit)","name":"PHLBOBIT01.ConnectionServer32","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1178"},"id":1178,"cuid":"AaMjzl.x749MhIyS.DEXoY0","description":"Crystal Reports 2013 Processing Server","name":"PHLBOBIT01.CrystalReports2013ProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1247"},"id":1247,"cuid":"AYWI6VC.J8BBvFqSj2JMyyY","description":"Crystal Reports 2013 Report Application Server","name":"PHLBOBIT01.CrystalReports2013ReportApplicationServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1172"},"id":1172,"cuid":"AZL.2iX_DXZAspTawsvOhH0","description":"Crystal Reports Cache Server","name":"PHLBOBIT01.CrystalReportsCacheServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1281"},"id":1281,"cuid":"AbWBEFGNJGxCjNK1DY2b2yM","description":"Crystal Reports Processing Server","name":"PHLBOBIT01.CrystalReportsProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1228"},"id":1228,"cuid":"AVDRV00HfORMkMkl55KMo7c","description":"Dashboards Cache Server","name":"PHLBOBIT01.DashboardsCacheServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1264"},"id":1264,"cuid":"ATJuZregTz1Ck3YJY1eMmW4","description":"Dashboards Processing Server","name":"PHLBOBIT01.DashboardsProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1184"},"id":1184,"cuid":"ASOm.SrtU7pInQBRZiUewdQ","description":"Event Server","name":"PHLBOBIT01.EventServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7277"},"id":7277,"cuid":"AZDQYV3Q7f5EkTWnc6bSlw0","description":"Explorer Exploration Server","name":"PHLBOBIT01.ExplorerExplorationServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7263"},"id":7263,"cuid":"AatQWEVsQdtHj1u2_SidyKM","description":"Explorer Indexing Server","name":"PHLBOBIT01.ExplorerIndexingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7284"},"id":7284,"cuid":"Ab11DBefLJRIuEfZJ5XQ7Wk","description":"Explorer Master Server","name":"PHLBOBIT01.ExplorerMasterServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7270"},"id":7270,"cuid":"AWSPc8Mmv3dDvDBYVSxiiq4","description":"Explorer Search Server","name":"PHLBOBIT01.ExplorerSearchServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1212"},"id":1212,"cuid":"AdePU2NkVzVGkCHc.je2P5k","description":"Input File Repository Server","name":"PHLBOBIT01.InputFileRepository","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1275"},"id":1275,"cuid":"Acxi23qKCy1FiGBoFzBXEtc","description":"Output File Repository Server","name":"PHLBOBIT01.OutputFileRepository","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/1258"},"id":1258,"cuid":"AS4fT9dzIuBBv6nFMbdaisA","description":"Web Application Container Server","name":"PHLBOBIT01.WebApplicationContainerServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/5090617"},"id":5090617,"cuid":"AW5jSqL.F1hOtiwZpk5CAZs","description":"","name":"PHLBOBIT01.WebIntelligenceProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6541"},"id":6541,"cuid":"AXn6vPIEispHjYAf5tuaEF8","description":"Adaptive Job Server","name":"PHLBOBIT02.AdaptiveJobServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7588"},"id":7588,"cuid":"AQgPfs_1WhlKvTQl0w1NT2k","description":"Adaptive Processing Server - Analysis","name":"PHLBOBIT02.APS.Analysis","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/4388705"},"id":4388705,"cuid":"ARtodu06Xj5FizlyqZMoV6A","description":"","name":"PHLBOBIT02.APS.AnalysisApplication","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7585"},"id":7585,"cuid":"AT4mRrAirvFPv.LhQkzqN5Q","description":"Adaptive Processing Server - Auditing","name":"PHLBOBIT02.APS.Auditing","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7584"},"id":7584,"cuid":"AdEGqTBYhm5AsYlC1wNGxaQ","description":"Adaptive Processing Server - Core Services","name":"PHLBOBIT02.APS.Core","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7590"},"id":7590,"cuid":"AUrLQ_szs9VMmU84qLOHmfw","description":"Adaptive Processing Server - Data Access","name":"PHLBOBIT02.APS.DataAccess","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7587"},"id":7587,"cuid":"ASUVQFFRAKRFvfQWfJsoIJA","description":"Adaptive Processing Server - Lifecycle Management","name":"PHLBOBIT02.APS.LCM","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7586"},"id":7586,"cuid":"ARcHLmjTRyhMjWn.y_onJxI","description":"Adaptive Processing Server - Search","name":"PHLBOBIT02.APS.Search","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/7589"},"id":7589,"cuid":"AY1s2.BeMbxEsF05cYPCLpc","description":"Adaptive Processing Server - Web Intelligence","name":"PHLBOBIT02.APS.WebI","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6301"},"id":6301,"cuid":"AU7SRyRyd1hKgH3TbRF5EYM","description":"Central Management Server","name":"PHLBOBIT02.CentralManagementServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6568"},"id":6568,"cuid":"AYhb6lnbKJFKn4WVnoFVnt4","description":"Connection Server","name":"PHLBOBIT02.ConnectionServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6574"},"id":6574,"cuid":"ARKezeTmhh5Iu4F.7.fvByk","description":"Connection Server (32-bit)","name":"PHLBOBIT02.ConnectionServer32","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6512"},"id":6512,"cuid":"Abv17tsXCStKpnJw7jeTguY","description":"Crystal Reports 2013 Processing Server","name":"PHLBOBIT02.CrystalReports2013ProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6581"},"id":6581,"cuid":"AWwWhkIpwc9CoAybOLeQtog","description":"Crystal Reports 2013 Report Application Server","name":"PHLBOBIT02.CrystalReports2013ReportApplicationServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6506"},"id":6506,"cuid":"AQIjnkiIYvROsApDkY24S7Y","description":"Crystal Reports Cache Server","name":"PHLBOBIT02.CrystalReportsCacheServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6615"},"id":6615,"cuid":"Ac70E5GxHX9GhnO335_zkpw","description":"Crystal Reports Processing Server","name":"PHLBOBIT02.CrystalReportsProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6562"},"id":6562,"cuid":"ATD9BYLbU2xGgL0dQc.HwEY","description":"Dashboards Cache Server","name":"PHLBOBIT02.DashboardsCacheServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6598"},"id":6598,"cuid":"Ab1VZJehgWFEkCl0f3EqJNY","description":"Dashboards Processing Server","name":"PHLBOBIT02.DashboardsProcessingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/6518"},"id":6518,"cuid":"AXpYgpIDDtlLnNzkprKrIK4","description":"Event Server","name":"PHLBOBIT02.EventServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/9033"},"id":9033,"cuid":"AUGWvt8N6gREukWGWmmxvHE","description":"Explorer Exploration Server","name":"PHLBOBIT02.ExplorerExplorationServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/9019"},"id":9019,"cuid":"AQePEipM3nhPsArG5mVbpR0","description":"Explorer Indexing Server","name":"PHLBOBIT02.ExplorerIndexingServer","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/5108034"},"id":5108034,"cuid":"ARZ7obbOLYdIpPx431uK2nI","description":"Explorer Master Server","name":"PHLBOBIT02.ExplorerMasterServer2","type":"Server"},{"__metadata":{"uri":"http:\/\/phlbobit01:6405\/biprws\/infostore\/9026"},"id":9026,"cuid":"AZHGDhiY7MpCsMMUqSf3AMs","description":"Explorer Search Server","name":"PHLBOBIT02.ExplorerSearchServer","type":"Server"}]}

Hi Tom,
As Anthony pointed out, currently it is not possible to get server details like the server state, PID etc. through BIP REST calls. Only prelimnary information about the infostore object is returned. You would need to use the BIP JAVA SDK to retrieve server details. However, we are in the process of enhancing BIP REST SDK. Can you please raise this on idea place under BIP>>SDK category?
Regards
Sumitesh Ranjan Srivastava
Product Manager, BI SDK & OEMs
SAP Labs India

HTTP delete method handling / enabling??

Hi, I am a newbie to the WL world and wondering if there is any setup/config required on the weblogic server to enable the handling of HTTP DETELE method or does it all control/manage by the application? I understand web servers like Apache requires specific setup/scripts to handle the DELETE method. What about WebLogic Srvr?

To enable delete, there must be "modify"permission
given to the user account who has access to web
application. By default "IUSR_machinename" windows
account has anonymous access to web application in
IIS. You must have to give "modify" permission to
this acccount on the web application folder.
That's it !!!!! You are ready to send HTTP DELETE
requestsUmmmmmm. This seems a greatly dangerous and stupid
solution!I mean this topic is completely out of scope for this forum and I know not a whole lot about IIS but it seems to me you just set it up so anyone can delete files from your website.
Did you really want to do that?

Enabling HTTPS while SSH is enabled

Hello
I have enabled SSH on my 3750 switches and notice that https is not working. Iam not sure they are related but seems to be oddly coincidental.
Therefore find it diffficult to monitor using CNA 5.7.6.
configs are given below
gvadc-sf01#sh run | i ip http
ip http server
ip http access-class 11
ip http secure-server
From my machine, i should normally have access to https running on the switch but isnt the case..
Do I need to generate a new crypto key separately for https?
Thanks for helping out on this..

Hi
It worked on the server farm devices bt i am unable to discover the core and the distribution devices.
in the topology the core devices are seen but when i add them to the community , it fails.
Attached is the snapshot.
and the devices are reachable from the server
ping 172.19.26.252
Pinging 172.19.26.252 with 32 bytes of data:
Reply from 172.19.26.252: bytes=32 time=1ms TTL=255
Reply from 172.19.26.252: bytes=32 time=2ms TTL=255
Reply from 172.19.26.252: bytes=32 time=2ms TTL=255
Ping statistics for 172.19.26.252:
    Packets: Sent = 3, Received = 3, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1ms, Maximum = 2ms, Average = 1ms
Control-C
^C
I guess it is trying to connect on this IP address and pings fine.. but the moment i try to discover it fails. It could successfully discover the other devices but not the core and the distribution devices

How do I create a Https Proxy server

hi,
I am writing a Proxy server in java. But my pogram do not support https protocol.Could you please tell me how can I implement a https proxy server.some sample code is more helpful.
This is very URGENT for me.
Thanks
Sujith Varghese

Hi Varghese,
Reading the thread I am able to make out u r facing the same problem as I do.
current scenario#1:
Machine#1 client (using URLConnection("https://...") ----> Machine#2 (Server https port)
what I want scenario#2
Machine#3 client (using URLConnection("https://...") ---> Machine#1 (Proxy for https)----> Machine#2 (Server https port)
In scenario#1
- I have a Client machine at Location#1 which can connect to on Location#2
- I only have SSH connection to machine at Location#1
now this scenario#2 is what I would like to run so that
- I am able to connect to mc#2 at loc#2 from a machine at loc#3 with mc#3
- effectively starting a https proxy at location number mc#1 at loc#1.
Hope that clears the problem domain.
any help will be greatly appreciated.
regards-
_Jagsir

Run HTTP File Server on Mac OSX Lion Server?

Hello!
I have a Mac Mini running Mac OS X Lion Server.
I would like to be able to host a Web Server that runs within the built in Apache server that allows the transfer of files from Client to Mac Mini HD and vice versa using authentication from Open Directory.
My inspiration is HTTP File Server, or HFS (no, not the Disk Format). This, however, is a Windows Program. It allows a HTTP platform to upload and download files from the HD of the machine it is running from. It comes as a nifty .exe that has everything you need. I'd like something similar but to run on the Mac Server.
Note, the upload and download cannot be done over FTP. It must be using HTTP like HFS does.
At the very least, I'd like a HTTP (Port 80) Web Server that runs within Apache that allows upload and download to the HD.
And at best, authentication using the built in Open Directory credentials. And to make even more secure, HTTPS or SSL.
So it's like iCloud or iWork.com but using my own disk space and credentials.
Predicted End Product:
User visits https://192.168.x.x or https://MyDNSName.dns.com
Greeted with Home Screen (.html or .php)
Clicks login
Has a nice login window to use (probably have to be .php to keep simple)
Logs in using same credentials as they would to logon to Mac Mini locally
Greeted with view of their files in their Directory, e.g.: /Library/Server/Web/HFS/User1 or /Library/Server/Web/HFS/User2, etc
Can choose to download present files
Or upload. Click Upload
Upload window appears. Selects file on Client machine.
Over HTTP, file is uploaded to Host Machine to /Library/Server/Web/HFS/User1
What I'd like to know is what is the easiest way of going about this? Some kind of CMS like Wordpress or software like HFS?
Many thanks,
Clark

I'm a little confused here... what's the requirement for HTTP based transfers vs. traditional file sharing protocols such as AFP?
Secondly, how does 'HFS' differ from any other HTTP form-based uploader? Any web CGI or scripting system such as PHP or Perl could easily present an upload form.
Have you considered WebDAV, which is designed as s file transfer protocol over HTTP?
It integrates at the Finder level, meaning you can copy files by simply dragging and dropping file (and folder) icons in the desktop, just like on a local drive. It's part of the standard Mac OS X Apache installation, too.

TREX not working for e-recruiting with HTTP content server

We have a separate e-recruiting instance where we have only e-recruiting functionality installed. In this system we are using Storate type as "http content server instead of standard setting "SAP system database" for HR_KW content repository via transaction code "OAC0"
Following are the details
Document Area: HR_KW
Storage type : HTTP Content Server
Version no. 0046 Content Server version 4.6
HTTP server vd24cs02.sce.com
Port Number 8080 SSL Port Number
HTTP Script archive
Phys. path /usr/sap/N09/SYS/global/
Points to be noted:
1) TREX Search functionality for Job postings etc is not
working with this setting, however if we use HR_KW_CONT (storage type=03 SAP System database) , above mentioned functionalities work. We observed that xml files required for TREX search are also not getting created when we change the settings.
2) We observed that when we change the storage type the indexing job is successful but application log shows some failures in reading/modifying xml files
Please let me know what are the settings/ procedure to use a different storage type instead of standard setting delivered with the product. Anything related to the setting for above requirement

Hi All,
I may have a similary problem but I'm not entirely sure.
I have been tasked with setting up a simple java servlet to authenticate against a BOXI (Business Objects) server, from my tomcat server (tomcat 5.5) on my windows XP desk top machine. I will add more info on this shortly.
I have been supplied with a krb5.ini file and the bscLogin.conf file as follows:
bscLogin.conf :
com.businessobjects.security.jgss.initiate {
com.sun.security.auth.module.Krb5LoginModule required debug=true;
krb5.ini[libdefaults]
default_realm = ADF.SOMEWHERE.CO.UK
dns_lookup_kdc = true
dns_lookup_realm = true
default_tgs_enctypes = rc4-hmac
default_tkt_enctypes = rc4-hmac
[realms]
ADF.SOMEWHERE.CO.UK = {
kdc = DC90.ADF.SOMEWHERE.CO.UK
default_domain = ADF.SOMEWHERE.CO.UK

Which media server protocols enable frame accurate seeking and frame stepping in players?

Hi,
... and thank you in advance for taking the time to respond. I am evaluating different protocls for different client platforms, and I'd like to know the following...
Which media server protocols enable frame accurate seeking and frame stepping in players? (It appears that RTMP does. However, what about HDS? What about HLS?)
Why is it that some do and some don't? (Intuitively, this would seem to be more an issue of the player than the protocol, but then maybe it has something to do with the buffers and the specific information passed to the client.)
For those protocols that do support frame accurate seeking and frame stepping in players, does the addition of Access DRM protection have any effect? (Intuitively, I would say no, but then maybe there are configuration changes needed in AMS to make it work.)
Thanks!

I searched for a DVD player with a jog shuttle -- and you're right. They're all but impossible to find! I havent' found one made in the past 5 years!
I don't know of any way you could accomplish the same thing with software either.
Most DVD players have slow-motion and frame-by-frame features. (Even my cheap $40 Toshiba.) That may be the closest to it.

Http content server

hello,
I want to create manually the KPro-metadata for documents. do you knwo which tables (like SDOKSTCA) I have to consider and make entries?
the next step is to migrate still existing documents on a sap http content server into the sap kpro and sap dvs.
which steps I have to made? which fm´s tables do I need?
is there any documentation in the web for this topic?

Check out this online help.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/58/2c0795e3914868ad716a524c158cb5/frameset.htm">Defining Content Repositories on the SAP Web Application Server</a>
Regards
Raja

Decompress files in HTTP Content Server

Hello,
I have a problem with the consistency of files stored in HTTP content server. That is to say I have an inconsistency between the object and content of the linked file.
I have a controller program for consistency but I do not know how to decompress.
The files in the content server are compressed with CSCompress (I think). Is there a possibility to decompress this files ?
Tank you.
Michel

Hi Michel,
Conerning your questions regarding the possibility to decompress the
files outside the SAP system, I'm afraid this is not possible. The
document files are stored in a compressed format. Even if you managed
to extrace the files from the tables, their content still remains
compressed. In other words, you still have to rely on SAP Content
Server's decompression logic to generate the original content. The only
way to retrieve the files, therefore, is by using the SAP Content
Server HTTP Interface.
Regards,
David

Store archiving IDoc's to an HTTp content server

Hi Guru's,
I want to store the archived IDoc's to an HTTP content server.
i have created an content server on OAC2 and i dont know how to link the archived IDocs to an HTTp content server.
I searched many forums, but i cant get the exact solution for this.
Could anyone help me on this.. pls...
Thanks in advance,
murugan..

Hello,
I will take a final call on this - As i understand all the configuration is correct but not updating in link tables.
I also understand system Id is ok as PO and IDoC are working.
In Content repository creation for PO & IDoC you will be taking document area as Data Archiving but for Printlist content repo you have to select ArchiveLink.
If you have done above then check connectivity and send the certificate
In your Archive server (IXOS, EASY, DOCUMENTUM or so on ) Check same content repository is properly configured.. if possible refresh it. Check for certification from SAP.
You are facing connectivity issue so cross check carefull all archive server level.
Lastly check oss note
Let us hope for the best.
-Thanks,
Ajay.

Http content Server - putCert specification

Hello,
I am trying to develop a HTTP Content server for connection with SAP but I encounter difficulties while implementing security.
The methode putCert stores the certificate from SAP but it seems like it is a X509 v1 certificate and not a V3. like mentionned in the spec doc
Moreover SHA1 seem to be used and not MDS.
Is there any particular reason?
Thank you

Ok finally managed to implement security on the SAP Content Server.
this code snippet works:
     Provider bc = new BouncyCastleProvider();
        int i = Security.addProvider(bc);
        byte[] message2Sign = "E25B5CECB6846E1F4F92C9E9058BC415FDrCN%3DC1120071026161701".getBytes();
        String good = "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";
        String bad = "MIIBlAYJKoZIhvcNAQcCoIIBhTCCAYECAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAWAwggFcAgEBMBMwDjEMMAoGA1UEAxMDQzExAgEAMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0wNzEwMTgxMTQxNTVaMCMGCSqGSIb3DQEJBDEWBBS2xHiqu4ZssgcURXnsqxhf5kTCBpgYFKw4DAhswgZwCQQEi9Vy1IpGpgBwpby66sV16jIHOJkoJI/blRDbeogY2IS69a9JmlAfQEnttGqA3jv/QAf98zFtmFpsDwniO1AhUBQNzq3BaLZ3Vj2dGBB5HPZh5eBa0CQHsZv4pNumfHRNhmlbKK9TDgPQrDDnG7F51g1FhTAFvceltg20WjHE/dFaH8jkigzaJDkFIuV50yGPytGPYmekELzAtAhUBOKbZGs22bNiMQ8UkPL4vaPewDwCFFof2Pv04DXMDPj2SnZ7wMcCKTfH";
        BASE64Decoder b64 = new BASE64Decoder();
        byte[] signature = b64.decodeBuffer(good);
        // get public key from cert
        File toto = new File("/tmp/toto.txt");
        FileInputStream fis = new FileInputStream(toto);
        PKCS7 test = new sun.security.pkcs.PKCS7(fis);
        java.security.cert.X509Certificate[] certs = test.getCertificates();
        //PublicKey pk = certs[0].getPublicKey();
        // construct PKCS7 data object
        CMSProcessable processable = new CMSProcessableByteArray(message2Sign);
        CMSSignedData s = new CMSSignedData(processable, signature);
        // get 1st signer infos
        SignerInformationStore signers = s.getSignerInfos();
        Collection c = signers.getSigners();
        Iterator it = c.iterator();
        SignerInformation signer = (SignerInformation) it.next();
        // verification
        boolean test2 = signer.verify(certs[0], "BC");
        System.out.println("Ok = " + test2);

HTTP Web Server

Hi!
I have to make an http web server: in a browser, I write http://ServerName:port/file and the browser must display the file. The only problem now seems to be that I changed
This line gets the OutputStream of the client socket
out = new PrintWriter(new OutputStreamWriter(scliente.getOutputStream(),"8859_1"),true) ;And this thing sends the response to the browser:
out.println("HTTP/0.9 200 ok");
                out.println("Server: Nombre del Servidor/1.0");
                out.println("Date: " + new Date());
                out.println("Content-Type: text/html");
                out.println("Content-Length: " + file.length());
                out.println(System.getProperty("line.separator"));
                BufferedReader localFile= new BufferedReader(new FileReader(archivo));
                String line= "";
                do
                    line = localFile.readLine();
                    if (line != null )
                        // sleep(500);
                        out.println(line);
                while (linea!= null);The thing is... That didn't work for displaying images and other file types, which is why I changed the previous code to:
out = scliente.getOutputStream();And the other part to:
byte[] contenido;
                int tamano;
                escribirEnCliente("HTTP/1.1 200 ok");
                escribirEnCliente("Server: Nombre del Servidor/1.0");
                escribirEnCliente("Date: " + new Date());
                escribirEnCliente("Content-Type: " + new MimetypesFileTypeMap().getContentType(archivo));
                escribirEnCliente("Content-Length: " + archivo.length());
                FileInputStream archivoLocal = new FileInputStream(archivo);
                tamano = archivoLocal.available();
                contenido = new byte[tamano];
                do
                  tamano = archivoLocal.read(contenido);
                  out.write(contenido);
                while (tamano != -1);escribir en cliente is a procedure like this:
public void escribirEnCliente(String str)
            out.write(str.getBytes("8859_1"));
}This way, I thought, I could send all types of files, not only text files. But it doesn't work, it doesn't even load the page. Any suggestions?

...and in your do/while loop think what happens when read() does return -1. You still write the entire buffer. You should do something like this instead:
    while (true) {
        int count = in.read(buf);
        if (count == -1)
            break;
       out.write(buf, 0, count);
    }

Compression with HTTP Remote Server

We are using the remote capabilities and are transferring objects that
have large amounts of data - is it possible to use compression if we are
using the HTTP Remote Server? Since this is fairly important as
performance is a critical issue for us, I'm willing to do some work to get
it working. If not, are there plans to include compression support?
Thanks for any suggestions,
Charles

Charles-
We do plan on including options for compression and encryptions in the
future, but for the time being, you would have to implement something on
your own. The transport for the remote PM is pluggable interface. See:
http://docs.solarmetric.com/manual.html#ref_guide_remotepm_server
Basically, you would implement com.solarmetric.remote.Transport (see
http://docs.solarmetric.com/javadoc/com/solarmetric/remote/Transport.html),
or subclass one of the existing ones.
In article <c6mgv0$1bb$[email protected]>, Charles Schmitt wrote:
>
We are using the remote capabilities and are transferring objects that
have large amounts of data - is it possible to use compression if we are
using the HTTP Remote Server? Since this is fairly important as
performance is a critical issue for us, I'm willing to do some work to get
it working. If not, are there plans to include compression support?
Thanks for any suggestions,
Charles--
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Accelerator http suppress-server-encoding enabled?

Similar Messages

Maybe you are looking for