Access Current date on Calendar

Hey,
Is it possible to read the Current date selected in Daily Calendar so that it can be used in script.
Also in case of Weekly Calendar is it possible to read "Start Date" and "End Date" of the Week??
Plesae respond ASAP.
It's urgent.
Thanks!

I defined a function module in ABAP to return the current date when invoked then. You may try "varv" and define a variable with replacement path pointing to any pre-defined variable that gives you the current-date. Hope it helps
Suresh Reddy

Similar Messages

ACCESS CURRENT DATE in IP - FOX formula

Dear Experts,
I need to pass current date as the parameter in the ATRT function but I do not have access to any infoobject of type date. If I try to access the value of a variable defined by SAP like 0dat I couldn't save the formula. Please help.
DATA ZPM_TODAY TYPE D.
ZPM_TODAY = VARV( 0DAT ).
The CHECK function results ok but SAVE fails and there is dump in st22 on CX_RSR_COB_PRO_NOT_FOUND . Please suggest.

I defined a function module in ABAP to return the current date when invoked then. You may try "varv" and define a variable with replacement path pointing to any pre-defined variable that gives you the current-date. Hope it helps
Suresh Reddy

How to set the current date in Calendar

Calendar carrentDate = Calendar.getInstance();
how do i initialize carrentDate to the current date?

I think you are looking for
currentDate.setTime( new Date() );

Setting Current date to calendar control when the page loads

Hi all ,
I am using a calendar contol i want to set its value to current date,
is there any method to do that ? Please help

This might help
http://blogs.sun.com/roller/page/divas?entry=calendar_component_tips

Access current Calendar data with script (Siebel 8)

Is there any way to get the current date and time the user has currently choosen in the calendar (daily view) applet, so this informaton can be used for scripting?
Thanks!
Stefan
Edited by: user10797962 on 15.01.2009 04:31
Edited by: user10797962 on 15.01.2009 04:32

Hi,
I just figured out the issue here...
I had created a DB "SiebelDB" with default sort order... Ideally Siebel 8.1.1 recommends Latin1_General_BIN as RDBMS collation and while runing database server configuration utility, it is recommended to select Binary sort order.
Cheers,
Nikhil.

How to Get Current Date from MS Access in a Select Statement

From a java method, I want to use JDBC to get the current date from MS Access. In Oracle I would do "select sysdate from dual", but I can't figure out how to do it in MS Access. Here are some of my attempts. I have a table in my Access db called PARM.
//        String sql = "SELECT '0', NOW() FROM PARM";
//rs.next() is false
//        String sql = "SELECT NOW() AS CURR_DT FROM PARM";
//rs.next() is false
//        String sql = "SELECT DATE() AS CURR_DT FROM PARM";
//rs.next() is false
//        String sql = "SELECT NOW()";
//StringIndexOutOfBoundsException: String index out of range: -1
//        String sql = "select { fn now() } from parm";
        String sql = "SELECT Date()";
//java.lang.StringIndexOutOfBoundsException: String index out of range: -1
        ResultSet rs = stmt.executeQuery(sql);
        if (rs.next()) {
            return rs.getString(1);
        } else {
               return null;
          }

Why are you getting it as a String? You should be getting it as a timestamp.
Although getString works for me too. There is something else wrong that you haven't shown.
Here is some shoddy, but simple, test code that demonstrates it working.
import java.sql.*;
public class Test{
public static void main(String args[])throws Exception{
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    Connection c = DriverManager.getConnection("jdbc:odbc:stats");
    Statement s = c.createStatement();
    ResultSet rs = s.executeQuery("SELECT NOW()");
    while(rs.next()){
      System.out.println(rs.getTimestamp(1));
    rs.close();
    s.close();
    c.close();
}

I got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this?

i got new iphone and when i connect it to my pc, it lost all my current data and replaced it with the backup on my computer, which is from april. so i have lost all my calendar information and schedule. does anyone know how i can reverse this and get my information back?

Every backup replaces the old one, so, unless you included the backup folder in your computer backup routine, you can't get back your calendar info.
The only time iTunes will not replace a backup is, when you use it to restore from, this one will stay in the backup list in iTunes.
More info on backups here: http://support.apple.com/kb/HT1766

About error ORA-01208: data file is an old version - not accessing current

Hi friends,
After getting an error ,what i have stated below, my database instance was crashed everytime. I have seen alert.log file nothing is there and this error never come in pattern maner it will come anytime during week.
I have check with my application client they were doing nothing during this time even they have sent me their log i found no writing process was running and no jobs were running during this time.
My oracle version is 10.2.0.3 and os version is W2k.
Thanks in advance.
PM
Thu Oct 04 21:45:37 2007
Errors in file d:\oracle\admin\prd347\bdump\prd347_ckpt_1296.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old version - not accessing current version
Thu Oct 04 21:45:37 2007
Errors in file d:\oracle\admin\prd347\bdump\prd347_ckpt_1296.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old version - not accessing current version
_________________________________________________________________

Hi,
I am attaching this CKPT Trace file which might helpful to you all.
V10 STYLE FILE HEADER:
Compatibility Vsn = 169869312=0xa200000
Db ID=2446524247=0x91d2ff57, Db Name='PRD347'
Activation ID=0=0x0
Control Seq=654516=0x9fcb4, File size=491520=0x78000
File Number=7, Blksiz=16384, File Type=3 DATA
Tablespace #7 - CCDM_DATA_SMALL_T01 rel_fn:7
Creation at scn: 0x0781.e33c8c09 12/13/2004 15:16:45
Backup taken at scn: 0x0000.00000000 01/01/1988 00:00:00 thread:0
reset logs count:0x201c7917 scn: 0x0000.00000001 reset logs terminal rcv data:0x0 scn: 0x0000.00000000
prev reset logs count:0x0 scn: 0x0000.00000000 prev reset logs terminal rcv data:0x0 scn: 0x0000.00000000
recovered at 09/25/2007 12:17:31
status:0x4 root dba:0x00000000 chkpt cnt: 211627 ctl cnt:211626
begin-hot-backup file size: 0
Checkpointed at scn: 0x079b.81db9e4f 10/04/2007 21:45:15
thread:1 rba:(0x33cee.2.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
Backup Checkpointed at scn: 0x0000.00000000
thread:0 rba:(0x0.0.0)
enabled threads: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
External cache id: 0x0 0x0 0x0 0x0
Absolute fuzzy scn: 0x0000.00000000
Recovery fuzzy scn: 0x0000.00000000 01/01/1988 00:00:00
Terminal Recovery Stamp 01/01/1988 00:00:00
Platform Information: Creation Platform ID: 7
Current Platform ID: 7 Last Platform ID: 7
DATA FILE #7:
(name #18) E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF
creation size=0 block size=16384 status=0xe head=18 tail=18 dup=1
tablespace 7, index=7 krfil=7 prev_file=0
unrecoverable scn: 0x0000.00000000 01/01/1988 00:00:00
Checkpoint cnt:211628 scn: 0x079b.81dba014 10/04/2007 21:45:20
Stop scn: 0xffff.ffffffff 10/03/2007 02:00:10
Creation Checkpointed at scn: 0x0781.e33c8c09 12/13/2004 15:16:45
thread:0 rba:(0x0.0.0)
enabled threads: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
Offline scn: 0x0000.00000000 prev_range: 0
Online Checkpointed at scn: 0x0000.00000000
thread:0 rba:(0x0.0.0)
enabled threads: 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old version - not accessing current version
error 1242 detected in background process
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01122: database file 7 failed verification check
ORA-01110: data file 7: 'E:\ORADATA\PRD347\CCDM_DATA_SMALL_T01_01.DBF'
ORA-01208: data file is an old versio n - not accessing current version
------------------------------------------------------------------------------------------------

Customizing Calendar to disable all dates After Sysdate (Current Date)

Hi All,
I have a Requirement In OAF to Disable All Dates in the Calendar After the Sysdate
Ex: In Air Ticket Booking We can't Enter Previous Dates in the Calendar Like that I need to make the
my calendar dates after Sysdate Non Entarable
Please let me know if you have any sample code or We can fire any action before selecting a date to disable a particular set of Dates
Thanks,
Krishna

Hi ,
As per my opinion ,u shud put a check in PFR method at select event fire of date field ,capture the selected date anc check it shud be <= sysdate else throw a message using
throw new OAException ("this date should not exceed current date", OAException.ERROR);
Thanks
Pratap

Can't get access in Time Machine to certain folders for any date earlier than current date/time.

Can't get access in Time Machine to certain folders for any date earlier than current date/time, even when entering as Admin. Why do certain folders have small red "-" badge in lower right corner of folder icon? Here's a picture of the dilemma:
I've tried monkeying with priveleges using Command I, and changing users, but to no avail. Can anyone help?

Right. Here's what the permissions look like from the Finder Command I:
I'm not sure what "Custom" means, but when I then try to change it to "Read & Write", it doesn't take.... just comes back as Custom. Interesting to note that not only am I logged into Joan's account where the data folder and file lives) to do this, but when I do it from my own account as Admin (dunc...mpster) I get the same result.

Calendar today doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite

Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
Is it a bug?

Sorry for the huge chunk of code.
Mm, yes, I'm far too lazy to read all that.
But you should be overriding paintComponent(), not paint().
http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?

Show current month's calendar based on computer date

As a page loads, is it possible to check the computer date
and display the current month's calendar (specialized with events),
either on the same page or on a separate page?
Any help would be appreciated,
Cliff

You can adapt this script to do that:
http://www.valleywebdesigns.com/vwd_csscalhelp/vwd_csscalhelp_faq.asp#a5
cliff man wrote:
> As a page loads, is it possible to check the computer
date and display the
> current month's calendar (specialized with events),
either on the same page or
> on a separate page?
> Any help would be appreciated,
> Cliff
>
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

IOS 7 calendar open to current date

Is there a setting to get Calendar in ios 7 to open to the current date. Mine seems hit or miss. Thanks for any help.
PK

This is not the solution, the answer is the description of the bug.
In OSX the calendar **ALWAYS** open in the current day. This makes sense.
IN IOS the calendar open in who knows what day. This not only fails to be useless, it is a time waster.
Please fix this bug and make it work in IOS as it does is OSX.
Have a nice day,

My iCloud calendar interacts with all of my iOS devices showing the current date, but on my iPad the rest of the calendar is blank. Any suggestions?

My iCloud calendar interacts with all of my iOs devices showing the current date, but on my iPad the rest of the calendar is blank. Any suggestions?

I can help you for the future. Regularly back up your computer to an external hard drive (or cloud alternative). If you have your library backed up, it could be reinstalled on your new computer. In your current situation, you will have to reload all of your CDs as syncing of non-iTunes purchased music is only one way (Computer to iPod)

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Access Current date on Calendar

Similar Messages

Maybe you are looking for