Access interface script (lost in APIs)

Does anyonehave (or can point me at) an eample of the total script needed to generate a PDF output file from a known RTF file and a dynamic XML data source file?
I can find bits and pieces in the Appendix A of the users guide but I am lost in the details (I am not very JAVA literate). I think I need to
(a) convert and save the RTF source to XSL.
(b) Marry the dynamically defined XML file with the XSL using the FO Processor Engine
(c) somehow use the FO output (XSL_FO?) to generate the final PDF report.

Frank again -- variation on the above question. Is there a library any place of scripts / format examples? i suspect that my questions have already been asked but i just cannot trace the responses.
thanks

Similar Messages

Accessing the Osi Soft PI Api Interface

Hi,
does anyone have any experience accessing the Osi Soft PI API Interface with LabVIEW.
I was trying to use a .dll, but had problems getting connected.The ODBC Interface isn't available. So I'm running out of ideas.
Thanks.
Solved!
Go to Solution.

Hi,
you don't need to install anything but LabVIEW or the LabVIEW runtime engine to publish shared variables via OPC.
Please refer to this link for more information.
The document mentions ServerExplorer or QuickClient as test clients for the OPC communication. Please note, that these tools are just mentioned as a method for testing the OPC communication, but you don't need to install these tools in order to make the OPC communication work with your OPC client.
Regards,
Jochen

SAMPLE RECEIVING OPEN INTERFACE SCRIPT(ROI 이용자를 위한 SCRIPT)

제품: MFG_PO
작성날짜 : 2006-05-11
SAMPLE RECEIVING OPEN INTERFACE SCRIPT(ROI 이용자를 위한 SCRIPT)
================================================================
PURPOSE
Receiving Open Interface(ROI)를 좀더 쉽게 사용할 수 있도록 만들어진
tool이라고 할 수 있다. 이 script를 이용을 통해 user는 PO no, user id,
Org id를 입력하면 script는 PO에서 최소한의 data를 가져와 receiving
transaction을 생성하기 위해 ROI에 data를 입력한다.
Receiving Transaction Processor는 insert 된 data를 실행한다.
Explanation
Instructions:
1.Script exroi.sql을 local computer에 copy 하거나 sqlplus 환경의 text
edior에 script 내용을 cut&paste 한다.
2.사용가능한 PO no, User id, Org id를 결정한다.
3.sqlplus prompt에서 아래와 같이 입력한다.
SQL> @ezroi.sql
4.PO no, User id, Org id를 입력하라는 prompt를 볼 수 있을 것이다.
5.exroi.sql script를 관련된 PO data를 가져와 rcv_headers_interface 및
rcv_transactions_interface tables에 insert 한다.
만일 PO shipment lind이 closed, cancelled, fully received 되었다면
ROI table에 data를 insert 하지 않는다.
Note: 이 script가 data를 validate 하진 않으며,ROI API 자체 validation
이 실행될 뿐이다.
6.Script가 끝나면 Receiving Transaction Processor를 실행하여 insert 된
lines을 처리할 수 있다. Transaction Status Summary 화면을 통해 실행된
line이 pending 인지 error 상태인지 확인할 수 있다.
Notes:
1.Org_id parameter 값을 찾는법:
a) Application에 접속, Help> Diagnostics> Examine으로 이동.
Block:$Profile$, Field: ORG_ID 를 선택한다.
b) ORG_ID 값을 note 해 놓고 ORG_ID prompt시 이 값을 입력한다.
2.User_Name parameter 값을 찾는법:
a) Application에 접속, Help> Diagnostics> Examine으로 이동.
Block:$Profile$, Field: USER_NAME 를 선택한다.
b) USER_NAME 값을 note 해 놓고 USER_NAME prompt시 이 값을 입력한다.
Example
"eZROI.sql' script...
--*** eZROI ***
--*** by ***
--*** Preston D. Davenport ***
--*** Oracle Premium Applications Support ***
--*** Oracle Worldwide Global Support Services ***
--*** Date: 23-JUL-2003 - Beta release ***
--*** Date: 09-SEP-2003 - Rev A Added multi- ***
--*** shipment line capability ***
--*** Parameters: ***
--*** ORG_ID Organization ID ***
--*** USER_NAME FND User Name ***
--*** PO_NUMBER Purchase Order Number ***
--*** This script intended for a standard Purchase ***
--*** Order document to be inserted into the Oracle ***
--*** Receiving Open Interface (ROI) via the standard ***
--*** Oracle open interface api for a simple Receive ***
--*** transaction. ***
--*** Note: This script only considers open Purchase ***
--*** Orders. This script will not allow over- ***
--*** receipt, cancelled or closed PO's to be ***
--*** inserted into the ROI and received ***
CLEAR BUFFER
SET VERIFY OFF
SET LINESIZE 140
SET PAGESIZE 60
SET ARRAYSIZE 1
SET SERVEROUTPUT ON SIZE 100000
SET FEEDBACK OFF
SET ECHO OFF
DECLARE
X_USER_ID NUMBER;
X_PO_HEADER_ID NUMBER;
X_VENDOR_ID NUMBER;
X_SEGMENT1 NUMBER;
X_ORG_ID NUMBER;
X_LINE_NUM NUMBER;
BEGIN
DBMS_OUTPUT.PUT_LINE('***ezROI RCV API Insert Script***');
SELECT PO_HEADER_ID , VENDOR_ID , SEGMENT1 , ORG_ID
INTO X_PO_HEADER_ID , X_VENDOR_ID , X_SEGMENT1 , X_ORG_ID
FROM PO_HEADERS_ALL
WHERE SEGMENT1 = '&PO_NUMBER'
AND ORG_ID = &ORG_ID;
SELECT USER_ID INTO X_USER_ID
FROM FND_USER
WHERE USER_NAME = UPPER('&USER_NAME');
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID ,
GROUP_ID ,
PROCESSING_STATUS_CODE ,
RECEIPT_SOURCE_CODE ,
TRANSACTION_TYPE ,
LAST_UPDATE_DATE ,
LAST_UPDATED_BY ,
LAST_UPDATE_LOGIN ,
VENDOR_ID ,
EXPECTED_RECEIPT_DATE ,
VALIDATION_FLAG
SELECT
RCV_HEADERS_INTERFACE_S.NEXTVAL ,
RCV_INTERFACE_GROUPS_S.NEXTVAL ,
'PENDING' ,
'VENDOR' ,
'NEW' ,
SYSDATE ,
X_USER_ID ,
0 ,
X_VENDOR_ID ,
SYSDATE ,
'Y'
FROM DUAL;
DECLARE
CURSOR PO_LINE IS
SELECT PL.ITEM_ID , PL.PO_LINE_ID , PL.LINE_NUM ,
PLL.QUANTITY , PL.UNIT_MEAS_LOOKUP_CODE ,
MP.ORGANIZATION_CODE , PLL.LINE_LOCATION_ID ,
PLL.CLOSED_CODE , PLL.QUANTITY_RECEIVED ,
PLL.CANCEL_FLAG, PLL.SHIPMENT_NUM
FROM PO_LINES_ALL PL ,
PO_LINE_LOCATIONS_ALL PLL ,
MTL_PARAMETERS MP
WHERE PL.PO_HEADER_ID = X_PO_HEADER_ID
AND PL.PO_LINE_ID = PLL.PO_LINE_ID
AND PLL.SHIP_TO_ORGANIZATION_ID = MP.ORGANIZATION_ID;
BEGIN
FOR CURSOR1 IN PO_LINE LOOP
IF CURSOR1.CLOSED_CODE IN ('APPROVED','OPEN')
AND CURSOR1.QUANTITY_RECEIVED < CURSOR1.QUANTITY
AND NVL(CURSOR1.CANCEL_FLAG,'N') = 'N'
THEN
INSERT INTO RCV_TRANSACTIONS_INTERFACE
INTERFACE_TRANSACTION_ID ,
GROUP_ID ,
LAST_UPDATE_DATE ,
LAST_UPDATED_BY ,
CREATION_DATE ,
CREATED_BY ,
LAST_UPDATE_LOGIN ,
TRANSACTION_TYPE ,
TRANSACTION_DATE ,
PROCESSING_STATUS_CODE ,
PROCESSING_MODE_CODE ,
TRANSACTION_STATUS_CODE ,
PO_LINE_ID ,
ITEM_ID ,
QUANTITY ,
UNIT_OF_MEASURE ,
PO_LINE_LOCATION_ID ,
AUTO_TRANSACT_CODE ,
RECEIPT_SOURCE_CODE ,
TO_ORGANIZATION_CODE ,
SOURCE_DOCUMENT_CODE ,
DOCUMENT_NUM ,
HEADER_INTERFACE_ID ,
VALIDATION_FLAG
SELECT
RCV_TRANSACTIONS_INTERFACE_S.NEXTVAL ,
RCV_INTERFACE_GROUPS_S.CURRVAL ,
SYSDATE ,
X_USER_ID ,
SYSDATE ,
X_USER_ID ,
0 ,
'RECEIVE' ,
SYSDATE ,
'PENDING' ,
'BATCH' ,
'PENDING' ,
CURSOR1.PO_LINE_ID ,
CURSOR1.ITEM_ID ,
CURSOR1.QUANTITY ,
CURSOR1.UNIT_MEAS_LOOKUP_CODE ,
CURSOR1.LINE_LOCATION_ID ,
'RECEIVE' ,
'VENDOR' ,
CURSOR1.ORGANIZATION_CODE ,
'PO' ,
X_SEGMENT1 ,
RCV_HEADERS_INTERFACE_S.CURRVAL ,
'Y'
FROM DUAL;
DBMS_OUTPUT.PUT_LINE('PO line: '||CURSOR1.LINE_NUM||' Shipment: '||CURSOR1.SHIPMENT_NUM||' has been inserted into ROI.');
ELSE
DBMS_OUTPUT.PUT_LINE('PO line '||CURSOR1.LINE_NUM||' is either closed, cancelled, received.');
END IF;
END LOOP;
DBMS_OUTPUT.PUT_LINE('*** ezROI COMPLETE - End ***');
END;
COMMIT;
END;
SET VERIFY ON
Reference Documents
Note 245334.1

I have the same problem on ESXI 5.5 for over a month now, tried the patches, tried the LTS kernel which others say results in an immediate result without patches, nothing seems to work and nobody seems to be able to offer a solution.
Did you make any progress ??
Error! Build of vmblock.ko failed for: 3.10.25-1-lts (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
make[2]: *** No rule to make target '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/linux/inode', needed by '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/vmblock.o'. Stop.
Makefile:1224: recipe for target '_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock' failed
make[1]: *** [_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock] Error 2
make[1]: Leaving directory '/usr/src/linux-3.10.25-1-lts'
Makefile:120: recipe for target 'vmblock.ko' failed
Last edited by crankshaft (2014-01-10 11:32:32)

FDM Cannot Access Calc Script

We use FDM to load data to Essbase and then run a script after export to Aggregate the data using Vlaidation Entities in FDM. We wrote a new Agg Script and so I changed the Validation entity from CalcALL to CALCCMA and now I get the below error.
Error: Essbase API Procedure: [EsbCalcFile] Threw code: 1030214 - 1030214 - [Tue Aug 03 13:25:25 2010]XXXXX/PLANNING/IncStmt/admin/Error(1030214)
User [admin] cannot access calc script: CALCCMA
The script is in the same folder as the old one. What is also strange is that when I try to change back the Script to CalcALL in the FDM valdiation entity I get an error as well. I checked all the integration settings and they are correct. I checked every script in FDM and asearched the adapter XML and found no references to the CalcALL script. I can't figure out where else the script would be referenced in FDM or if I need to change something on the Essbase side.

I just read the ReadMe and here is the relevant part:
Essbase Security Requirements
Some FDM tasks require the user to have certain security privileges for Essbase. The following table outlines the tasks and Essbase privileges required.
Perform a consolidation (assigning a Validation Entity to the FDM location).
Add Calc privilege (ESB_PRIV_CALC) to the active database
I'm assuming I will need a DBA to check this. The funny thing is that this was working before perfectly fine and then I changed the script in the validation entity and got the error. When I changed it back to the original script that worked I recive the same error. I was not involved in the implementation so I don't know how this was set up.

Creating JMX interface-script

Hi to all,
I want to create an interface script/programm, so as to be able to query JMX enabled applications and retrieve the results.
I know very little about Java (unfortunately), while I am very strong in perl.
How to do it ?
Is there something ready?
What do you suggest ?
Kind regards,
alexk

Hello,
if you plan to develop an application to interact with a remote application instrumented with JMX you could perhaps have a look to the Web Services Connector for JMX (downloadable from http://ws-jmx-connector.dev.java.net/). It (also) allows non Java application to interact with JMX/Java application. The interaction is done thanks to SOAP messages conveying WS-Management requests.
Some WS-Management libraries can help you develop such interaction VBScript (Microsoft WinRM) and Perl (VMWare ViPerl).
This document describes JMX interoperability with non Java application : http://java.sun.com/javase/technologies/core/mntr-mgmt/javamanagement/JSR262_Interop.pdf
Another alternative could be to use the REST access to JMX (an OpenDMK contribution). It only allows you to retrieve MBean names and attributes. Setting attributes, invoking operations and notification handling have not yet been developed : https://opendmk.dev.java.net/contributions/index.html
Regards.
Jean-Francois
http://blogs.sun.com/jmxnetbeans/

Is there a backdoor to filevault 2 or possible way to regain access after a lost password?

Is there a backdoor to filevault 2 or possible way to regain access after a lost password?

Found this link....
support.apple.com/kb/HT4790
....I hope it helps....

Prime infrastructure 2.0 - Inventory error with Virtual-Access Interface

Hi,
We have recently been trying to resolve a few issues with routers which get partial inventory failures upon discovery. I have managed to narrow this down slightly with the help of the inventory.log file. (With help from this post https://supportforums.cisco.com/thread/2255346 ) I have found the following happnes when this device is added:
[2014-03-04 14:00:27,537] [ICE Service[ 1]Thread: 29] [inventory] [ERROR] - 172.16.3.202 Object detected as SAME but DB Object obtained from the database is NULL For instance id: 0 For generated POJO: PPPEncapsulation[callBack=false,callIn=false,callOut=false,multilink=false,name=Virtual-Access1,oneTime=false,owningEntityId=69757688_172.16.3.202,preferedAuthType=NONE,deployPending=NONE,name=Virtual-Access1,owningEntityId=69757688_172.16.3.202,instanceId=0,_orderedListOEIndex=<Integer>,_creationOrderIndex=<Integer>,instanceVersion=0]
I have highlighted above where it mentions the problem with the virtual access interface. The configuration on the router is for PPPoE and the virtual-access1 interface is bound to Dialer0.
It then goes on to roll back the transaction:
172.16.3.202 persistObjects called with addList size = 307, updateList size = 6
172.16.3.202 Exception while persisting: com.cisco.xmp.persistence.common.util.DMMCRUDException:,message=errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Exception occured while inventory collection for device with id 69757688: com.cisco.xmp.inventory.ice.InventoryException: errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Done with collection. Total call method time: 15308
172.16.3.202 Rolling back the transaction
Has anyone else come accross this issue?
I have attched the log showing just messages from this device.
Thanks,
Mike.

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

Accessing unix script from Apex

Hi There,
Is it possible to access unix script from apex?
Or to run a batch file through apex?
Please help!!
Thanks in advance,
Pushpesh Pallav

The solution depends on the purpose of the script.
"I want to run a database backup"
learn RMAN, create an RMAN repository, and have Oracle backup itself
"I want to backup a schema on demand"
use dbms_datapump
"I want to put/get a blob to/from a file on an internal machine"
one method:
Install and register Oracle Agent on internal machine
use dbms_scheduler.put_file()/get_file()
"I want to get a file on an external machine that is available via HTTP(s)"
I've used ORDDoc( 'http://...' ) to get this file.
"I want to run the script and parse the results. - no input parameters are needed"
Enhance the script to return CSV like results
Then, create an EXTERNAL TABLE with a preprocessor
".. and the script returns performance matrix of a server"
I believe Oracle has already written (and incorporated) those scripts.
"..and the script checks to see if a new file exists"
DBMS_SCHEDULER.FILE_WATCHER()
"I want to give it some parameters,run the script, and then parse the results"
Wrap the script with SOAP/REST.
Example wrapper stuff:
http://soaplab.sourceforge.net/soaplab2/
MK

How to Access UNIX scripts using Java

folks,
Is there any way we can access UNIX scripts or CRON Jobs in java, I am planning to come up with some monitoring tool for our application and in these i need to monitor the UNIX scripts whether its running or not ,
Let me know if any of you guys done this,
Regards
Mathew

Check the java.lang.Runtime object and exec(...) methods.
Marc

Launch mysql script using jdbc api

Hello.
I tried something like this:
               stmt = conn.prepareStatement("source ./etc/schema-ddl.sql");
               stmt.execute();
               stmt.close();but it doesn't seem to work. Is there anyway possible to launch an sql script using jdbc api?
thx in advance

That won't work. Try using Runtime.exec to launch the full MySQL command.

Problem- Accessing java script code in java

i want to access java script variable in java code.
Is it possible through any method or function?
help me.

Stick to your old thread.
http://forum.java.sun.com/thread.jspa?threadID=777985

SAP CRM to MS Access Interface

I have a CRM to MS Access Interface that I have to set up. Has anyone set that up before and if so;
How was it done?
Any documentation on that?

Dear Abdul!
There are probably many ways to achieve what you´re looking for. It heavily depends on several factors, which solution turns out to be the best for you. You should take into account security, data integrity and sensitivty, business context and system architecture, among others.
First of all though, you should specify wheter you want to access the SAP table for unidirectional read access only, or if you have the requirement to also update data in any SAP table (are you talking about a SAP standard table or a customer Z-table?)
If you´re looking for a straight forward solution for read-only access, you can create a custom Z* RFC-enabled function module that reads out your SAP table and returns the values to your calling application. You could also use the WebServices interfaces of your SAP WebApplicationServer, depending on your release level. Furthermore, kindly check, if there are standard BAPI´s available that contain the data you need in their return parameters.
Of course, you also could directly interface on a DBMS level between MS access and your underlying SAP DB, but most likely such a solution will never be supported in any productive environment, and for good reason. So you should look into one of the other options mentioned.
I´ll gladly provide more detail about any of the mentioned approaches, but would like to have a little more input about your requirements before, so the optimal solutions can be found.
Kind regards
Christoph

I am still having problems accessing java script sites. Anyone else having this problem?

I am still having problems accessing java script sites. Anyone else having this problem?

Javascript can be left on, but Java (which is something very different) should generally be turned off.
Apple barred Java from running on Macs, leaving companies that rely on Java plug-ins out in the cold.
Apple blocked Java 7 Update 11 by adding it to the banned list in XProtect.
This was the second time in two weeks that Apple has blocked Oracle's code from running on Macs. This time Java is blocked through Apple's XProtect anti-malware feature.
Java has come under fire as the means by which hackers have been able to gain control of computers. In April 2012 more than 600,000 Macs were reported to have been infected with a Flashback Trojan horse that was being installed on people's computers with the help of Java exploits. Then in August Macs were again at risk due to a flaw in Java, this time around, there was good news for Mac users: Thanks to changes Apple has made, most of us were safe from the threat.
Unwilling to leave its customers open to potential threats Apple decided it's safer to block Java entirely.
Macs running OS X Snow Leopard and beyond are affected.
UPDATE for those running Lion or Mountain Lion:
Oracle on Friday February 1 released a new version reportedly addressing vulnerabilities seen with the last build.
Apple disabled Java 7 through the OS X XProtect anti-malware system, requiring users to have at least version "1.7.0_10-b19" installed on their Macs. The release dated February 1 carries the designation "1.7.0_13-b20," meeting Apple's requirements.
Oracle "strongly recommends" applying the CPU fixes as soon as possible, saying that the latest Critical Patch Update contains 50 new security fixes across all Jave SE products.
Update foror Snow Leopard users:
Apple have issued update 12 for Java for OS 10.6:
http://support.apple.com/kb/DL1573
Note: On systems that have not already installed Java for Mac OS X 10.6 update 9 or later, this update will configure web browsers to not automatically run Java applets. Java applets may be re-enabled by clicking the region labeled "Inactive plug-in" on a web page. If no applets have been run for an extended period of time, the Java web plug-in will deactivate.

PPP IP address and virtual-access interface

With what command can I find out what IP address has been bound to which virtual-access interface of a PPP negotiated connection to an IOS router 2811/12.4(17a)?
Thanks for any hint.
Mat

Hi Mat,
try the command "sh us a" (I think the long version is show users all).
HTH, regards
Mark

How to call business rules scripts via Java API

Hi
I have a problem. I have some scripts (business rules in essbase) that can be seen thru Administration Services Console under Business Rules folder. How can I execute these script using Provider Services (via Java API to EssBase interface)?

hi
i look too java api sample for "HBR Lounch"
you can try found example in EAS folder
C:\Hyperion\AdminServices\AppServer\InstalledApps\Tomcat\5.0.28\eas\webapps\hbrlauncher\MC_LaunchWindow.jsp
please back, if you will have resolution :)

Access interface script (lost in APIs)

Similar Messages

Maybe you are looking for