Access to Table

Hi,
Is there a transaction (or a report) in R/3 that can list all the programs that accessed(read/update) a specific table at a certain date/time? I need this information because we are currently investigating a deadlock issue that occurred in our production system.
Any input will be appreciated.
Thanks in advance for your help!
Best regards,
Kris Caldoza

Hello Kristofferson,
I am not aware of any such transaction/standard report. However there is still a way.
Do one thing. Go to SE11 and give the table name. Choose where used list (Hotkeys: CTRLSHIFTF3). This will give you a list of all reports that either read or update the table.
Then you can use STAD to find if any of the resulting reports was run during that time interval.
We had used this approach once when we needed to know about the report which had deleted the entires from one of your critical tables. I hope it works for you as well.
Please award points if this solved the issue.
With Regards.
Ruchit.

Similar Messages

Error while accessing a Table on Oracle Database 10.2

Hi Experts,
We have a table that contains a CLOB datatype in one of its column. However when i tried to access the table i get the below error.
Table Name: discrete_jobs
Error:
(Error starting at line 1 in command:
select * from [email protected]
Error report:
SQL Error: ORA-22992: cannot use LOB locators selected from remote tables
22992. 00000 - "cannot use LOB locators selected from remote tables"
*Cause: A remote LOB column cannot be referenced.
*Action: Remove references to LOBs in remote tables.)
Pleas Help!
Regards,
Ravi R

See some work arounds - "How to select table from remote database having clob field</a>

Accessing internal tables at runtime.

Hi all,
I am writing a code where in i have to transfer data from excel to database table.
Iam getting the excel data in an itab. Can anybody help me with how to access internal tables at runtime ?
i am using the following code with sy-tabix. here, when the sy-tabix is odd it picks up the value,
but i want that within the same loop when i increment sy-tabix by 1, then it should fetch the second column of same row. But its not working as it shows an error that it does not permit subfield access.
the code is as follows:
LOOP AT t_tab[] into wa_tab .
data: l_tabix type sy-tabix,
 name_index type sy-tabix.
 data: c type i.
 l_tabix = sy-tabix.
 name_index = l_tabix+1.
 c = ( l_tabix mod 2 ).
******to check if sy-tabix is odd**********
 if c ne 0.
 READ TABLE t_tab into wa_tab index l_tabix.
 wa_product1-product = wa_tab-VALUE.
************incrementing sy-tabix*************
 READ TABLE t_tab into wa_tab index name_index. (here it shows error)
 wa_product1-product_name = wa_tab-value.
 endif.
endloop.
Thanks in advance.

Hi Omer,
Copy and paste this code.
=====================================
REPORT ztest_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SYST'
CHANGING
ct_fieldcat = it_fcat[].
LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial.
MOVE-CORRESPONDING is_fcat TO is_fieldcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP.

Accessing BKPF table takes too long

Hi,
Is there another way to have a faster and more optimized sql query that will access the table BKPF? Or other smaller tables that contain the same data?
I'm using this:
   select bukrs gjahr belnr budat blart
   into corresponding fields of table i_bkpf
   from bkpf
   where bukrs eq pa_bukrs
   and gjahr eq pa_gjahr
   and blart in so_DocTypes
   and monat in so_monat.
The report is taking too long and is eating up a lot of resources.
Any helpful advice is highly appreciated. Thanks!

Hi max,
I also tried using BUDAT in the where clause of my sql statement, but even that takes too long.
    select bukrs gjahr belnr budat blart monat
     appending corresponding fields of table i_bkpf
     from bkpf
     where bukrs eq pa_bukrs
     and gjahr eq pa_gjahr
     and blart in so_DocTypes
     and budat in so_budat.
I also tried accessing the table per day, but it didn't worked too...
   while so_budat-low le so_budat-high.
     select bukrs gjahr belnr budat blart monat
     appending corresponding fields of table i_bkpf
     from bkpf
     where bukrs eq pa_bukrs
     and gjahr eq pa_gjahr
     and blart in so_DocTypes
     and budat eq so_budat-low.
     so_budat-low = so_budat-low + 1.
   endwhile.
I think our BKPF tables contains a very large set of data. Is there any other table besides BKPF where we could get all accounting document numbers in a given period?

Error while accessing BSAD Table with dunning date

Hi ,
I developed a report for FI module accessing BSAD table with default customer ranges and for specific dunning dates - It ran for a very long time and timed out - (I know this is due to huge volume of data) -
Is there any way to access BSAD table easily with Dunning dates (Other than creating Index on it) ???
Or any standard function module available ??
Regards
Rajesh.

Hi
Try the below tables for the dunning data details:
MHND            Dunning Data
MHNDO           Dunning data version before the next change
MHNK            Dunning data (account entries)
MHNKA           Version administration of dunning changes
MHNKO           Dunning data (acct entries) version before the next chang
SKS

TIME_OUT when accessing Oracle table from SAP using native SQL

Hi,
I have a problem in one of my native SQL statement. It takes a long time accessing the table considering that the number of records to be retrieved is only small.
Something happened on the Oracle system. But, stilll to be confirmed. Looking further at the issue, it seems that when the value in the where clause equated is a literal (meaning the value is not declared in DATA or CONSTANTS in the ABAP Program)
Example
1.
EXEC.
WHERE FIELD = '1'
ENDEXEC.
instead of
2.
CONSTANTS: c_1 value '1'.
EXEC.
WHERE FIELD = c_1
ENDEXEC.
i found that when the way of coding is same as Example 1, a time-out error occurs. But when in Example 2, no issue.
Can someone explain this?
Thanks!

Repetitively asking the same question again and again is against the forum rules.
Please post an explain of the SQL statement on the remote machine.
Markus

How to access a table present in same database

I have one mc_pl_st tables in mcs_owner schema, but am accessing from another schema age_owner schema,but both schemas are in same database.
Shall I use user_name.table_name to access the table present in other schema present in same database
Pls suggest,
Thanks

T.PD wrote:
Skalny wrote:
859486 wrote:
Shall I use user_name.table_name to access the table present in other schema present in same databaseYes, you must use schema name if you want to access table or other object, which belongs to different user.You could also use synonymes created by the tables owner:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7001.htm
How ever, the user accessing must have SELECT (and INSERT/UPDETE/DELETE?) permissions granted.And also we can use public synonymes.

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

Error message in TRFC 'An SQL error occurred when accessing a table'

Hi all,
Can any one tell what this below error message is about in while go into TRFC
'An SQL error occurred when accessing a table'.
and please tell me how to solve this problem.

Hi
Try to see what all tables are accessed by data source. and see if there is any lock on that..
If some other job is accessing that table - then there might be lock on that which is causing failure..
1) Try looking at ST22 dump also..
2) Try to do RSA3 in R/3 and if see if its is fetching any records or not..
Hoep it helps
--SA

Loading issue : Error: sql error in the database while accessing a table

Hello,
where as one of the DTP in the process chain failed due to *Error: sql error in the database while accessing a table*, where as in the short dump it showing as Transaction log of data base is full., but i checked the data base space in DB02, more space is available . once we run the same DTP by manually its successful. its not through any errors.
could u please help me out solve the problem.
Thanks
siva kumar.

it might be a lock. do you drop index before loading?
the database might be full at the moment of loading and not later if many loadings happen at the same time on the same system...
when you then rerun your dtp manually, it can go through as it's perhaps the only one running at that moment...
you can try to set the btch parameter to 1...this will help in some cases.
M.

Error ODS activation - sql error when accessing a table.

Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either caught nor passed along using a RAISING clause, in the procedure "UPDATE_ATAB" "(FORM)"
Since the caller of the procedure could not have expected this exception
 to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.

There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource. You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman

Internal error when accessing a table -

Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
Thomas

These are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors                                    absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8                                                   dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

SM58 : Internal error when accessing a table

Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
Thava

Hi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

How to access a table of SAP standard SAP method from external program

Hi Friends,
I have to access a table and modified it defined in a standard SAP method (PROCESS_INPUT_FILTER) of class (CL_HANDLE_MM).
As we normaly do it in case of Standard program
for example: ('(SAPLMEPO)ett[]') here we are accessing internal table ett defined in SAPLMEPO.
so how we can do the same thing if some thing defined in standard SAP method.
Pl. help.

Thanks for the info guys, it will come in handy.
I need to validate that a number is entered with zero or one decimal place, then make sure it is evenly
divisible by .5 in order to test for whole or half numbers only. If not, I use an alert to
display a message when the user leaves the field.
If there is a better way to achieve this, I am all ears!
Thank you for your time,
Gary

Access to Table

Similar Messages

Maybe you are looking for