"Access to this album or movie is restricted"

When I attempt to view a page within one of my published web gallery albums, I rarely get past the first page without getting the message "Access to this album or movie is restricted. Please contact the site host for a username and password." This message also comes up anytime I attempt to switch the view from Grid (switching to Mosaic, Carousel or Slideshow also sets this off). I'm assuming this is a bug. Any thoughts? I apologize in advance if this has been covered.
Thank you!
http://gallery.me.com/pmontejr#gallery

Welcome to the Apple Discussions. I'm able to view all of the galleries without issue. You might try deleting the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder and try again. If that doesn't help log into another account on your Mac, access the web galleries and see if you can from there. Report back the results.
NOTE: I'm noticing the photos are somewhat blurry/grainy. What size are the originals that you're using for the web gallery.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Similar Messages

Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.

Hi guys,
I posted a question which was reviewed and published, now i am not able to see the quesrion and the replies anymore.
I am getting this message "Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here."
Can you please help.
Thank you
Andy

You get this due to your newer status in forum, most of the contect needs to be reviewed and approved by one of us ie modertors of this space

Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here. ''Getting

I tried to post a question on SCN and I too got the following error:
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
Does that mean my question is rejected ? or is it being moderated ?

This is because your new discussion thread was rejected. You should see feedback from the moderation at http://scn.sap.com/actions/notifications

Access to this place or content is restricted. If you think this is a mistake, please contact your administrator

Hello,
I am not able to find the discussion, as it is showing error message
Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
The thread link is mentioned below.
http://scn.sap.com/thread/3704991
Thanks

Hi Sanjana,
I think you may raised issue about CRM Data source enhancement.
if yes then that might be hidden by moderator as per SCN rules. Mean its alerted by scn experts and moderators will take action as epr scn rules.
Data source enhacement have been discussed mnay times on scn.
please go thru sample existing codes, apply your lgoic and follow it.
Later you can do syntax check and do the debeug with help of abap expert.
Thanks

Access to this place or content is restricted.

Hello, For some reason our account always has issues getting access to docs that are on the community.netapp.com site, I have access to the site as i can login but when i click this link I get the following error: Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here. https://forums.netapp.com/docs/DOC-12285

Hi , It looks like you are trying to access a link on forums.netapp.com (vs. community.netapp.com, which is this site). The document you are trying to access is restricted. Can you tell me how you are getting that URL or the information you are looking for?

Licensing restrictions prevent access from this address.

After updating CF7 to the new DST requirements, we are seeing
INTERMITTENT issues with some SWF movies not being loaded.
flash forms work just fine.
Any indication which way to look would be fabulous.
Coldfusion-err.log shows:
03/13 15:47:48 ERROR Proxy Servlet: Licensing restrictions
prevent access from xx.xx.xx.xxx
03/13 15:47:48 ERROR Proxy Servlet: Allows addresses: [
{71.218.19.250} {192.168.1.145} {74.93.23.77} {24.131.24.127}
{192.168.1.1} ]
03/13 15:47:48 error Licensing restrictions prevent access
from this address.
java.io.IOException: Licensing restrictions prevent access
from this address.
at
flex.services.license.AddressRestrictionFilter.invoke(AddressRestrictionFilter.java:28)
at
flex.server.j2ee.cache.CacheFilter.doFilter(CacheFilter.java:165)
at
flex.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:66)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at
jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
at
jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
at
jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

alexfrates wrote:
> After updating CF7 to the new DST requirements, we are
seeing INTERMITTENT
> issues with some SWF movies not being loaded.
>
> flash forms work just fine.
> Any indication which way to look would be fabulous.
>
> Coldfusion-err.log shows:
> 03/13 15:47:48 ERROR Proxy Servlet: Licensing
restrictions prevent access from
> xx.xx.xx.xxx
> 03/13 15:47:48 ERROR Proxy Servlet: Allows addresses: [
{71.218.19.250}
> {192.168.1.145} {74.93.23.77} {24.131.24.127}
{192.168.1.1} ]
On a J2EE multiserver install this usually means your JRun
instance is
not registered. In the JRun admin, drill down to the settings
of the
instance and check whether it is a developer edition or a
registered
edition. I wouldn't know any way to fix this other then a
reinstall.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

HT201077 Why can't I access my iCloud albums from apps on my mobile devices?When I go to access my albums from any app on my phone or iPad, I cannot access the iCloud albums, only the albums synced with iTunes/iPhoto manually. This is frustrating because

When I go to access my albums from any app on my phone or iPad, I cannot access the iCloud albums, only the albums synced with iTunes/iPhoto manually. This is frustrating because I cannot add to those albums from mobile device, I have to add to them during a Mac sync. I would like to be able to use my iCloud albums to organize my photos but if I cannot access them from apps it seems pointless. I will end up having to maintain both an iCloud library and a separate iPhoto library which is more work that seems necessary. I want everything easy to organize and access. It seems like in this age where most people are more likely to use their mobile devices than their Macs (and some do not even own Macs) that there should be a mobile solution. Hopefully I am simply without a clue and you folks can help me out with a fix or a source of info as a solution. I have not found answers yet.

gail from maine wrote:
Hi keriah,
When you go to Settings>Pages, do you have the "Use iCloud" option turned on?
Cheers,
GB
That was it! Thanks!!!

How do I overcome Keychain access "Access to this item is restricted". I need to view a password stored in Keychain

I am the adminstrator and only user of this MacBook. I need to see an internet password which is not stored on my browser or email client. When I go into Keychain Access and check the Show Password box it asks for Keychain password - that is no problem. Enter password, hit OK, then the message comes up Access to this item is restricted. I have gone into File - Get Info and made it read and write to Administrsators, System, Wheel and myself but it still says Restricted. Any ideas anyone PLEASE!!

I posted the same question elsewhere, but after poking around I discovered the following, which might be helpful.
Open Keychain Access, which is in your Applications/Utilities folder. There should be two sections on the left sidebar, Keychains and Category. When I opened it, only the Category section showed, but I eventually found an arrow which expanded the Keychains section.
Choose Login in the Keychains section, and "Passwords" in the Category section. Use the search field to find the program you need the password for, and double-click on it. A window with that program's label will open. Under the Attributes tab, click on the little Show Password checkbox. You'll be asked for your admin password. Once you've entered it, the password will appear in the Show Password field.
As an aside, I thought this is what I was doing all along, so here's another thing I did before it started working: I found Keychain First Aid and ran both the Verify and Repair options. Both of these reported no problems, but it might have done something to encourage things to work right.*
*As you can tell, I anthropomorphize my electronic devices. It's the only way to cope with the way they misbehave.

Keychain Access to recover password: "Access to this item is restricted."

I need to recover my network password, which I saved in my keychain, but can't figure out how to get it using keychain access. I've tried to get keychain access to reveal other passwords which I do know, but I can't get it to show them either. Here's what I tried to do:
Opened Keychain Access, found the network name, and double clicked on it. A window describes its attributes popped up, but the password field was blank. Clicking on the "Show password" box brought a window saying "Access to this item is restricted." I tried to retrieve other passwords in the keychain today using the same method with the same results.
I'm running Snow Lion, version 10.6.8.

OK, I played around with keychain access for a while, but finally hit on it. For the benefit of others with the same problem, here's what worked:
There are two sections on the left sidebar, Keychains and Category. I'd chosen "Passwords" in the Category section, and eventually, in poking just about everything in that window, I clicked on an arrow which expanded the Keychains section. I kept playing until I clicked on System in the Keychains section. That brought up all of my past networks. I double-clicked on my current network's name and once again clicked on the "show password" box. This time I was asked for my admin password, hit enter, and vois-la! there it was.
The only thing that had happened in the meantime was that I ran Keychain First Aid's verify and repair (found in Keychain Acces's File menu). I have no idea whether this is what changed things, or if it was just expanding the Keychains section, but now I can view any of my passwords in the Paswords choice in the Category section.
Who knows if this will help anyone, but I'll go to some of the other recent threads and post a link to this thread in case it can.

Azure Antimalware (Endpoint Protection) says "your system administrator has restricted access to this app"

I see many posts about using SCCM to configure policies, etc., etc. However, I can't find any information about my specific issue:
I have installed the Antimalware extension on several Azure VMs. Only one VM allows access to "System Center Endpoint Protection". All the other ones say "your system administrator has restricted access to this app". Now, since I am the
system administrator, I am at a loss how to be able to see / configure the other VMs using this program.
I have not installed SCCM, since I didn't think I would need it. If, in fact, I must install SCCM, it pretty much defeats the purpose of an extension.
Any ideas would be greatly appreciated.
--- If I am in the wrong forum, please let me know where I should post my question, since there don't appear to be any forums discussing extensions for Azure.

Although azure endpoint protection is the same core technology as SCEP it is not managed in the same way. Also, if the ConfigMgr agent is not installed on these VMs, then it's quite impossible for ConfigMgr to the source of the issue here. You are better
off posting to an Azure forum.
However, did you elevate when launching the EP console?
Jason | http://blog.configmgrftw.com | @jasonsandys

Your system administrator has restricted access to this app.

Enabled the Endpoint role on primary site server.
Enabled Endpoint protection in Default Client Settings
We have Default Client Antimalware Policy set.
When I click on System Center EndPoint Protection in All Programs I get following error:
Your system administrator has restricted access to this app.

I am getting this on several windows client builds with SCEP now, we don't have an Applocker policy at all, one of the computers in question is running Win 7 Pro!
I cant see how it could be malware as the users are standard users.
I also don't know how long its been like this, but a machine we just re-imaged last week is now doing it.
going to re-image and see if an update is causing it.

In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2

Pictures and movies moved to sd card by the OS are not accessible by Album or Movies anymore

Hello all,
I am new to Android. I own a Xperia Z2 and placed in a 64g SD card. As I take more and more pictures and movies with the camera, every once in a while the OS send me a message saying that the main memory is almost full and suggest to relocate files on the SD card.
I accepted a few times just to realise that the Album and Movies apps are not updated. the link is lost and I dont find the tools to help the OS or the apps find the files at their new location.
Using a file manager (File Commander) I can see where the files are now. I can even see a preview by changing the view settings in the file manager but I cant open them. I get a broken link image instead.
Anyone knows what to do to update the apps and get access back to the files ?
many many thanks in advance
JFRICHER

I did the procedure three times now ( media storage / force stop / restart ).
Here's what I get: When I open the Album App, the first few hundred images displayed are broken links. If I browse way down the list, I can see a few pictures that are strangely on my sd card.
Still, using the file manager, I can locate all of them manually, see the thumbnail image for every file, but cant open any.
I just tried as you suggested to put the camera storage location back on internal storage, took a new picture and I was able to see it automatically both using Album app and the File Commander App.
I am clueless. :o(
thanks for your support alexdon :o)
JFR

IWeb 08 / Aperture 2 / MobileMe albums "No albums or movies available"

I've searched the forums and there doesn't seem to be a resolution for this. It seems the issue has been known about for quite some time now; hard to believe Apple is just ignoring this.
basics:
I created MobileMe albums via Aperture 2. I open iWeb '08 and go to insert the album and get this message: "No albums or movies available"; this message also appears via the Widget add. The albums are NOT password protected.

Well I have found a work around... Though others need to test it as well as me.
Log into me.com and open the gallery you prepared in aperture.
Select the "Adjust the settings for this album" button at the top, then select the pop-up that says "Syncs with" and choose "iPhoto" instead of "Aperture".
Press "Publish".
That's it, the gallery now appears in the iWeb Widgets list!
Also it still syncs with Aperture, both way

IWeb '09 / Mobileme Gallery Widget / No Albums or Movies / Snow Leopard

This is my first time trying to use the Mobileme Gallery Widget in iWeb '09 and all I can get it to do is tell me "No Albums or Movies". I have non password / no hidden galleries published via iPhoto '09 and iMovie '09. I even tried publishing via me.com. Nothing. It publishes my site to mobileme just fine I just upgraded to Snow Leopard this afternoon if that makes any difference. I had never tried this feature before today so I can't say if it worked prior to the upgrade or not. I do use a personal domain and iWeb does see this and can publish the site to it but all the site has is my test blank page and an blank mobileme widget in it. Any ideas?

Old Toad wrote:
I'd say Snow Leopard brought it on.
Thanks. I'll try avoiding those features until there's an update to SL and/or iWeb'09. Happily iWeb09 with SL deals fine with my website in its current rather featureless configuration so I'll keep it simple for now
Phil

"Access to this album or movie is restricted"

Similar Messages

Maybe you are looking for