Accessing explorer view updates modified timestamp only on e-mails (.msg) in SharePoint 2013

Hi All,
We've recently discovered that when users are accessing explorer view in various libraries on SharePoint, libraries which hold emails (.msg) are automatically updating all email modified timestamps with the time explorer was accessed and presenting modified
by as the user who initiated explorer view as well. 
It is not all documents, only emails (.msg). This happens every time without fail: When accessing a library in explorer view, right clicking and selecting refresh (or adding a new document to the library via explorer) triggers all emails to have their modified
stamp updated. It creates a single version at the time of refresh if version control is on. 
Here is the log in the scenario where I refreshed a library in explorer view which has only one email called pings.msg and it has had its modified timestamp updated to the time of refresh:
Medium Entering monitored scope (Request (PROPFIND:http://...:80/sites/ICT/Shared%20Documents/desktop.ini)). Parent No 
Medium Name=Request (PROPFIND:http://...:80/sites/ICT/Shared%20Documents/desktop.ini) 
Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|domain\me, ClaimsCount=29 
Medium HTTP Request method: PROPFIND 
Medium HTTP request depth header: 0 
Medium Overridden HTTP request method: PROPFIND 
Medium HTTP request URL: /sites/ICT/Shared%20Documents/desktop.ini 
Medium HTTP request translate header: f 
High [Forced due to logging gap, cached @ 09/12/2014 13:07:41.30, Original Level: Verbose] WOPI is disabled because no discovery data are found. 
High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders 
Medium Leaving Monitored Scope (Request (PROPFIND:http://...:80/sites/ICT/Shared%20Documents/desktop.ini)). Execution Time=12.1815063087627 
Medium Leaving Monitored Scope (Request (POST:http://...:80/sites/edrms/_vti_bin/sitedata.asmx:GetContentEx")). Execution Time=428.478759171906 
Medium Name=Task: SessionManager.PerformOngoingRequestDepartures 
Medium Entering monitored scope (Request (GET:http://...:80/sites/ICT/Shared%20Documents/Pings.msg)). Parent No 
Medium Name=Request (GET:http://...:80/sites/ICT/Shared%20Documents/Pings.msg) 
Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|domain\me, ClaimsCount=29 
Medium HTTP Request method: GET 
Medium Overridden HTTP request method: GET 
Medium HTTP request URL: /sites/ICT/Shared%20Documents/Pings.msg 
Medium HTTP request translate header: f 
Medium Spent 0 ms to bind 81408 byte file stream 
Medium Spent 16 ms to send 81408 byte file stream 
Medium Leaving Monitored Scope (Request (GET:http://...:80/sites/ICT/Shared%20Documents/Pings.msg)). Execution Time=19.2898818145882 
Medium Entering monitored scope (Request (HEAD:http://...:80/sites/ICT/Shared%20Documents/Pings.msg)). Parent No 
Medium Name=Request (HEAD:http://...:80/sites/ICT/Shared%20Documents/Pings.msg) 
Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|domain\me, ClaimsCount=29 
Medium HTTP Request method: HEAD 
Medium Overridden HTTP request method: HEAD 
Medium HTTP request URL: /sites/ICT/Shared%20Documents/Pings.msg 
Medium Leaving Monitored Scope (Request (HEAD:http://...:80/sites/ICT/Shared%20Documents/Pings.msg)). Execution Time=7.43690888087732 
High [Forced due to logging gap, cached @ 09/12/2014 13:07:41.35, Original Level: Verbose] SQL connection time: 0.0458857201124724 
High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity 
Medium Entering monitored scope (Request (PUT:http://...:80/sites/ICT/Shared%20Documents/Pings.msg)). Parent No 
Medium Name=Request (PUT:http://...:80/sites/ICT/Shared%20Documents/Pings.msg) 
Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|domain\me, ClaimsCount=29 
Medium HTTP Request method: PUT 
Medium Overridden HTTP request method: PUT 
Medium HTTP request URL: /sites/ICT/Shared%20Documents/Pings.msg 
Medium HTTP request translate header: f 
Medium Spent 0 ms to read 81408 byte file stream 
Medium |No zip central directory found 
Medium Information Rights Management (IRM): The email address of the requesting user is successfully set to IRM. 
Medium Information Rights Management (IRM): The IRM status of the document [Shared Documents/Pings.msg] is: untried (-1), the return values is: 0x0. 
High Leaving Monitored Scope (EnsureListItemsData). Execution Time=22.2785298131466 
Medium Spent 16 ms to parse 
Medium |No zip central directory found 
Medium |Nothing to commit
Any ideas on how to stop this behaviour?

Probably you have an antivirus that scan these files when you are open the library in Explorer View.
Try to configure the antivirus for exclude location.
Hope helps.
http://valygreavu.com/

Similar Messages

  • How to sync only subfolders in a library in SharePoint 2013?

    Hi, I have one library in which too many folders and subfolders are created.<o:p></o:p>
    I want to sync only 2 subfolder to my PC from SharePoint 2013 site.<o:p></o:p>
    Is it possible to sync only subfolder instead sync complete library? <o:p></o:p>

    Hi,
    According to your post, my understanding is that you wanted to sync only subfolders in a library in SharePoint 2013.
    Using SkyDrive Pro you can only sync at document library level. You cannot sync complete site or a single folder in a document library.
    With SkyDrive Pro Sync Client, there is no possibility to Sync a partial subset of a document library. By design the entire doc library gets synced and we get local copies of all the files and folders under it.
    When a User attempts to sync a sub folder within a Library, the sync tool always picks the parent Library as the Sync point and syncs everything under it. Users are forced to sync the document library as a whole.
    More information:
    SkyDrive Pro Demystified!
    http://blog.technovert.com/2013/11/skydrive-pro-demystified/#more-143
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Developed Access Web app on Office 365 - cannot publish it to On Premises SharePoint 2013

    I developed an Access Web app, which works fine on Office 365.
    Now I want to deploy it to our on premises SharePoint 2013 farm
    After I upload the .app package I created from it to our app catalog it shows 'Valid App Package = no':
    In the ULS log I found the following:
    There were errors when validating the App package: There were errors when validating the App Package. Other warnings / errors associated with this exception:  The current version of SharePoint is less
    than the SharePointMinVersion specified in the app manifest. CurrentVersion='15.0.4569.1000', SharePointMinVersion='16.0.0.0'
    Is there any way that I can work around this, other then recreating the app manually on our on premises farm?

    Hi,
    Please check the SharePointMinVersion in AppManifest.xml file in your Office 365 app and modify it to "15.0.0.0", then deploy the app to SharePoint on-premise.
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Is Quick View (preview of file contents under search results) supported in SharePoint 2013 Foundation?

    We recently deployed SharePoint 2013 Foundation but can't make Quick View (seeing the contents of a file when you hover the mouse cursor over it) work in the search results.
    All Site Collection/Site Features are turned on.  Not sure what else to do.
    Does anyone have this feature working in SharePoint 2013 Foundation?
    Thank you!

    Hi Charlie,
    To view the Preview of the Search Results you need to Install/Configure Office Web Apps Server in your farm.
    Please check the below links for reference.
    http://technet.microsoft.com/en-us/library/ee855124(v=office.15).aspx
    http://technet.microsoft.com/en-in/library/ff431687(v=office.15).aspx
    If you think is helpful,Vote As Helpful! And if you see a reply being an answer to the question of the thread, click Mark As Answer.
    Mahesh

  • Allow All Users To Add List Items But Only Certain users To Edit Them (SharePoint 2013)

    How do we allow all users to add items to a list, but only allow certain users to edit the list items? Site is SharePoint 2013. We have tried creating custom permissions. That does not seem to work.

    I've setup a custom list on my SharePoint Foundation using a custom permission level to accomplish this.  I setup a custom permission level on the site called 'Add Only to Lists'  which allows adding an item to the list and setup the group with
    the default read and the custom permission level and it works.  The users in the group get the add item but do not get edit item, not even items they created themselves.
    Any users who should have full edit permissions can be setup under the normal edit/contribute/design permission level and work normal.
    Below is the Role Definition pulled via PowerShell and Role Assignments on the list in question.  As well as a picture showing what it looks like to something assigned that role level.
    Role Definition
    Name : Add Only to list
    Description : Can add items to a list but cannot edit or delete
    Type : None
    Hidden : False
    Order : 2147483647
    BasePermissions : ViewListItems, AddListItems, Open, ViewPages
    List Role Assignments
    Member : Home Visitors
    RoleDefinitionBindings : {Read, Add Only to list}
    Parent : IT Equipment Request
    ParentSecurableObject : IT Equipment Request
    The user can create a new item, but cannot edit items - not even items he created.

  • Authorization - Restrict to view non-leading ledger only

    Dear Gurus,
    Is it possible to allow users to have access to view non-leading ledger only and not main ledger?
    However, at posting, we will want users to still have access to post to main ledger.
    Appreciate your expertise on this!
    B Regards,
    Wong

    Hi Atif,
    Thanks for the response.
    I tried that but it is now telling me that I need to provide the leading ledger authorization too.
    Any idea why?
    We will like to only provide non-leading ledger authorization for displaying reports.
    Regards,
    Wong

  • Unable to access information spaces and Exploration View Sets

    I have run into a problem.   we had a Business intelligence server setup as a proof of concept for analyzing data.  This was done by a 3rd party company and we no longer can use them as a resource.
    Originally we were unable to view the information spaces and exploration views, unless the user is part of the administrators group.   I have been attempting to have a view only group created that would allow access.  
    now i am getting the following error when trying to open an explorer view set (The view sets show in a list).
    Failed to open the exploration view set
    Can't load the information space. (PS 50300)
    Failed to retrieve the exploration space 'cb06755b-7fab-4a21-b1ba-a41389bd5f59'.
    This happens with all accounts.   Administrators group, built in administrator account and the everybody group.
    We are using AD Authentication only on this server.
    does anyone know what might have happened to remove access to the information spaces?

    I can't seem to find where this workspace lives. 
    I am very new to Business Intelligence  (3 Months)
    I went to manage spaces in Explorer but there isn't anything there that points to the reports that i need to index.
    here is what i am trying to have show.

  • View read allows read only access

    Hi friends,
        I have created maintainance view, I am getting this warning " View read allows read only access , Maintainance not possible". So to avoid this, what should i do now.
    Thank you

    Hi,
    In Delivery and maintence check if the field Data Browser/Table View Maint. has the value delivery and maint allowed
    or delivery and maint allowed with restrictions.
    Regards,
    Rajesh Kumar

  • How to determine a View Object Type (read only or Updatable) ADF B.C 10.1.3

    Hi all,
    in scott Schema by ADF B.C 10.1.3, I created an entity object like emp
    and created view object EmpView from emp and dept entities
    and Application Module
    and when draging EmpView and dropping it in jspx
    while running I got an error :
    JB0-25003 your EmpView View Object has no Type
    How to determine a View Object Type (read only or updatable) in B.C ?
    Thanks

    Hi,
    this should not require any manual confiuration. Can you select the ApplicationModule in the model, right click on it and run the ADf BC tester ? Check if he ViewObject runs if not added to JSF
    Frank

  • How to update view  without modifying the base table ?

    Hi Experts , I need help in two qurstions
    1. How to update a view without modifying the base table ?
    2. How to write a file unix operating system in pl/sql ? is there any built in procedure is there ?
    Thank you

    Hi,
    I'm not sure what you're asking in either question. It would help if you gave a specific example of what you want to do.
    SowmyRaj wrote:
    Hi Experts , I need help in two qurstions
    1. How to update a view without modifying the base table ?You can't.
    Views don't contain any data; they just query base tables.
    You can change the definition of a view (CREATE OR REPLACE VIEW ...) so that it appears that the base table(s) have changed; that won't change the base tables.
    2. How to write a file unix operating system in pl/sql ? is there any built in procedure is there ?The package utl_file has routines for working with files.

  • Differentiate file uploaded from explorer view in SharePoint

    Hello,
    I am working on event receiver which on item adding updates few fields of document in library if those are not empty. The code is working fine in new file, drag and drop but in explorer view, I am not getting afterproperties values except two default field
    values (vti_parserversion and vti_filesize). But in updating event we are getting those values.
    Is there any way to differentiate file uploaded using explorer view in event receiver? So that I can work on updating in case of explorer view.
    Thanks.

    Hi,
    According to your post, my understanding is that you want to differentiate file uploaded from explorer view in SharePoint 2013.
    I made a test in my environment, both the two ways(“new document” or “Open with explorer” ) to upload document, the AfterProperties only contains two default field values(vti_parserversion and vti_filesize) in
    ItemAdding method in event receiver.
    There are two steps occur when uploading a file to document library, the file is uploaded in the first step, then the list item properties will be modified in the second step. 
    So, it is recommended to update the fields of document in ItemUpdating
    method in event receiver.
    Best Regards
    Dennis Guo
    TechNet Community Support

  • SharePoint 2013 - document libraries and newsfeeds are visible when viewed using Internet Explorer running on the server but not from any other machine

    On a single Windows 2012 R2 server I have installed SQL 2012 and SharePoint 2013 SP1 with the latest update roll ups. When I remote desktop to the server using the farm and site collection admin account  and open page http://server_name_here using
    Internet Explorer, I'm able to see newsfeeds and document libraries.
    If I connected to a separate Windows 7 machine as  the farm and site collection admin account  and open page http://server_name_here using Internet Explorer, I'm able to view the SharePoint pages except I cannot see any newsfeeds or document libraries.
    There's just blank space where they should be. I have repeated this process on several other machines that are not the server and get the same result on every machine (I've tried other servers, desktops, adding the SharePoint site to the trusted sites list
    in IE, even using firefox). I'm using the same account as I did when I logged onto the server directly. Any thoughts as to what's going on?
    Thanks!

    Thanks for the idea, Harsh. What am I looking for?
    It is currently set to the default of http://server_name and http://server_name:port_number (the latter is for Central Admin).
    When I have access to the server, I have always done so the same way, using http://server_name. This was true when I access it from the desktop of the server itself and when I tried to access it from other desktops and servers (the machines where I had the
    issues with the libraries and feeds not showing up). Are there other values I should add?
    I have not tried to add http://server_FQDN as we don't plan on using that to access it but if you think it will help I would be happy to add it.

  • Please help me I am not seeing Database table column names in field explorer view

    Hi,
    I am developing a crystal report using eclipse and sql server. After creating connection, when i drag and drop tables, The table name and its columns should apper in field explorer view. Then we drag the columns onto crystal report. Unfortunately I am just  seeing only table names but not column names in field explorer view. Could anyone help me?
    After downloading eclipse I have plugged in the crystal report using the following instructions
    1. Click on the Help menu, and then Software Updates > Find and Install... to open the Install/Update wizard.
    2. Select Search for new features to install and click Next.
    3. Click the New Remote Site button. This will launch the New Update Site wizard
    4. Type the Business Objects Updsate Site for the Name field and the following for the URL: http://www.businessobjects.com/products/dev_zone/eclipse/
    5. Click OK to complete the wizard.
    6. Enable the newly created Business Objects Update Site checkbox as well as the Callisto Discovery Site (which should appear by default with Eclipse 3.2) and click Finish.
    Expand the Business Objects Update Site node and enable the Crystal Reports for Eclipse 1.0.0v555 checkbox.
    8. Expand the Callisto Discovery Site and click the button "Select Required". This will automatically select the required Eclipse features necessary to successfully install Crystal Reports for Eclipse.
    Thank You
    Rajavardhan Sarkapally

    Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
    If you are using SQL Server 2012/2014, then you can use
    sys.dm_exec_describe_first_result_set (Transact-SQL) to gte the informations.
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • Sharepoint 2013 explorer view error - problem opening this location in file explorer (HTTPS + Win7 Enterprise 64 bit + IE9 32 bit + Office 2007 32 bit)

    Hi,
    We have a problem using Sharepoint 2013 explorer view. (Error - We're having a problem opening this location in file explorer. Add this web site to your trusted sites list and try again).
    I'm using Windows 7 Enterprise 64 bit, Office 2007 32 bit and IE9 32 bit. And the sharepoint site is a https site.
    Some people in my organization are able to browse and some users getting the above error. (with the same client machine configuration)
    If I clear my browser cache, closes the browser and open it then the explorer view is working. But after a minute if I try again I'm getting the above mentioned error. This 1 minute expiration happens is since the first time I have used explorer
    view, not since I opened the browser.
    I have tried the following on my machine:
    1. Modified the web client service to run automatically.
    2. Verified the sharepoint site is part of trusted sites (https://*.spsite.com/)
    3. Compatibility mode is turned on.
    4. Tried adding
    AuthForwardServerList in the webclient registry settings under parameters. (restarted the web client)
    5. Verified the BasicAuthLevel set to 1 (since we are using SSL). Tried setting the BasicAuthLevel to 2 as well. (restarted the web client)
    6. Tried installing software update for web folders (KB907306).
    Verified the below on the production server:
    1. The web application has the root site collection.
    2. It has WebDav Publishing disabled under IIS Web Server feature.
    Could some one please help me in resolving this issue?
    Thanks.

    Hi  Deepak,
    According to your post, my understanding is that you failed to use "Open with Explorer"  in a document library.
    For your issue, please verify the following:
    ActiveX controls must be enabled in IE.
    As you are using Windows 7 Server as the client computer, you must install the Desktop Experience feature from Server Manager.
    Make sure there is a working Root site collection.
    Install this hotfix for windows 7 work with sharepoint 2013 :hotfixv4.microsoft.com/.../463266_intl_x64_zip.exe
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • SharePoint 2013 Service Pack 1 broke Explorer View (WebDAV)?

    We recently installed SharePoint 2013 Service Pack 1 and have since been troubled by Explorer View. Very often Explorer View doesn't work. This error often appears:
    "We're having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again."
    The weird thing is that sometimes the Explorer View works just fine, but more often it doesn't. There's are a lot of blogs / topics about this on the internet, but they all didn't help resolve this issue. We use persistent cookies for our STS (AllowSessionCookies
    == false), we've added the site to Trusted Sites, made sure WebClient service is running on the clients, cleared cookie caches, etc., etc.
    Explorer View works fine when we connect to Office 365 instances. But our local farm has these problems. We use ADFS auth.
    Our problems actually resemble the problems this guy had:
    http://blog.skadefro.dk/2011/09/sharepoint-2010-and-webdav.html
    But his fix doesn't seem to apply to us.
    This all started after installing Service Pack 1, so could this be a Service Pack 1 issue?

    Hi LZandman,
    There is a KB article, it provides that:
    Issue 2
    Assume that you access the date in a SharePoint Document Library. Then, you click Open with Explorer View when you view a SharePoint Document Library in Internet Explorer 10. In this situation, the operation fails, and you receive one of the following error
    messages.
    Error message 2
    We're having a problem opening this location in File Explorer. Add this web site to your Trusted Sites list and try again.
    Notes
    These issues occur only when the SharePoint server is configured for cookie-based authentication, such as SharePoint Online.
    You may encounter a similar issue when you use other Web Distributed Authoring and Versioning (WebDAV) servers that are configured for cookie-based authentication.
    Please take a look at :
    http://support.microsoft.com/kb/2846960/en-us , and download and install the hotfix, compare the result.
    I hope this helps.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

Maybe you are looking for