Accessing Information Structure

Hi,
I have created an info structure to be used for my customer forecast in the planning table. Once I have actual sales, I want to be able to compare actual sales with the forecasts. Currently, i can get the fields from actuals and forecast using planning type. However, i do not know how to populate the data from the actuals? How do you set it? Can I access the info structure data?
Thanks.
rgds,
Sue

> Hi,
>
> I have created an info structure to be used for my
> customer forecast in the planning table. Once I have
> actual sales, I want to be able to compare actual
> sales with the forecasts. Currently, i can get the
> fields from actuals and forecast using planning type.
> However, i do not know how to populate the data from
> the actuals? How do you set it? Can I access the info
> structure data?
>
> Thanks.
>
> rgds,
> Sue
hi,
     the information for statistical purpose can be accessed by two ways
   1. LIS/SIS this can be accesed with the path
IMG-SD-Sales-Sales information system
   2. ABAP Query
if answered , reward with points

Similar Messages

How to automate iPPE Access Information filling in ie02

Hello users,
I am trying to automate the equipment creation using BAPI and BDC. I am able to create equipment using BAPI and BDC recordings for all the tabs in ie02 but not able to reacord the iPPE Access Information, where in there comes a popup Selection of iPPE Access which am not able to record in a BDC. Is there a better way to fill in the iPPE access information.

Hi Zabeen
This can be possible that you have made some changes to the recording code so transfer the recording to the program and execute it in foreground with any changes to that code, hope you will get the pop up window.
If that pop up is related to any message like warning or success then the BDC program will not take that into consideration.
Also use this option in SHDB.
option : simulate background mode.
while recording though BDC use the following option as ticked.
Default Size = X
Cont. after Commit = X
Not a Batch Input session = X
or try to change the equipment using BAPI_EQUI_CHANGE .There is a structure called DATA_SPECIFIC which is specific for Equipment related data.
For classification related changes, look at the FM's available in transaction BAPI
Cross Application Components -> Classification
Cheers
NZAB

Credit management Information structure

Hi All,
The credit-relevant data is updated into information structures S066 and S067, where it
is accessed and updated.
How to see structures S066 and S067. I mean what is the transaction to see this?
Regards
Nidhi

Dear Customer,
there is no special transaction to see the S066 or S067.
In this case have the possibility to create your own report for the evaluation.
But you can see the sales values in transaction FD32 or FD33 but only for the relevant
customer.
The other possibility is transaction SE16.
Hope that the information are helpful.
regards
Claudia

How do you use Default Resource Access Information?

I have some 10g Forms & Reports that I want to use with SSO and they will all be connecting to the database with the same connection info. I know how to configure a Default Resource Access Information, but how do you use this with Forms & Reports?

Douglas,
the default Resource Access Infomation should be the connection information right? This is used in conjunction with SSO. You need to configure your F&R applications to delegate authentication to SSO by placing ssoMode=true in the config section of formsweb.cfg.
The Forms Servlet will connect to OID retrieve the Resource Access Information (descriptor) for a given user and automatically log them into the application.
Users will need a global identity in OID and SSO must be enabled to use resource access info with F&R
regards,
tt

How to create a new report from an information structure?

Dear gurus,
My customer wants to have a sales report by product hierachy. I want to create an information structure for product hierachy and create a report from this info structure like a standard report. I dun know which steps to do. Pls tell me how to do. Your help are highly appreciated.
Thank you!
Rgds,
Nghi Do

Hi,
Steps in LIS EXTRACTION:
T.code - :MC18 u2013 create field catalog
1. Characteristic Catalog
Application-01-Sales and Distribution, 02-Purchasing, 03-Inventory Controlling, etc..
Catalog category 1. Characteristic catalog, 2. Key figures catalog 3. Date catalog Select characteristic catalog and enter, click on characteristic select the source table and it will be display the relevant source field and select the source field, copy + close, copy.
Save, similarly create key figures catalog
T.code : MC21 u2013 create infostructure
Example u2013
Inforstructure : S789
Application u2013 01
Choose characteristic select the catalog, select the fields, copy + close Choose key figures catalog select the key figures ,copy + close, save and generate
T.code u2013 MC24 u2013 create updating
Infostructure : S789
Update group : 01- Sales document, delivery, billing document ,enter Select the key figures click on rules for key figures give suggest rules, copy save and generate Click on updating (activate updating) Select the infostructure set periodic split 1. Daily, 2. Week, 3. Month, 4. Posting period Updating u20131)No updating,2)Synchronous updating (V1), 3)As synchronous updating (V2), 4)As synchronous updating (V3),
T.code u2013 LBW0 - Connection of LIS Information structures to SAPBW Information structure : S786 Select the radio button-Setup LIS environment and Execute.
Select the radio button-Generate data source and Execute.
For Delta update:
Select the radio button-Generate updating and Execute Select the radio button -Activate / deactivate and Execute.
T.code u2013 SBIW u2013 Display IMG (implementation guide) Setting for applications specific data source u2013 logistics u2013 Managing transfer information structure u2013 setup of statistical data u2013 applications specific setup of statistical data u2013perform statistical setup u2013 sales.
Choose activity
Setup u2013 Orders, deliveries, billing
Choose the activities enter the infostructure (S789), give name of the run, date of termination, time of termination, No. of tolerated faulty documents. Then execute
T.code u2013 RSA3 u2013 Extractor checker
Give the data source name eg. 2LIS 01S789 and execute, result will get some records Go to BW side replicate data source u2013 Assign infosource u2013 Create infocube u2013 Create update rules u2013 create infopackage and schedule the package with initialize delta process.
For delta update :
In R/3 side
T.code u2013 MC25, set update (V1) or (V2) or (V3)
T.code u2013 LBW0, choose generate updating and execute then choose activate / deactivate and execute
BW side - create infopackage and schedule the package with delta update.
First time if your scheduling the infopackage -in R/3 side T.code :MC25 -Udating set to No update,insted of selecting the update V1,V2,V3.
If your doing the Delta update:in R/3 side T.code :MC25-Updating set to either V1 or V2 or V3. and the to T.code :LBW0 -Select the radio button Active/deactivate and Execute.
and schedule the infopackage with delta update.
Modules for LIS : SD,MM, PP,QM.
Deltas for LIS:
After setting up the LIS environment, 2 transparent tables and 1 extract structure is generated for this particular info structure. Within transaction SE11 you can view the tables u2018SnnnBIW1u2019, u2018SnnnBIW2u2019 and the structure u2018SnnnBIWSu2019 and the InfoStructure itself u201ASnnnu2018
The tables S5nnnBIW1 & SnnnnBIW2 are used to assist the delta update process within BW.
Extract structure u2018SnnnnBIWCu2019 is used as an interface structure between OLTP InfoStructure and BW
The OLTP system has automatically created an entry in the control table u2018TMCBIWu2019. Within transaction u2018SE16u2019 youu2019ll see, that for your particular InfoStructure the field u2018BIW activeu2019 has the value u2018Xu2019 and the field u2018BIW statusu2019 is filled with value u20181u2019 (refers to table SnnnBIW1).
The orgininal LIS update program u201ARMCX#### will be enhanced within the form routines u201Aform Snnnbiw1_update_....u2018 and u201Aform Snnnbiw2_update
With the transaction u2018SE38u2019 youu2019ll see at the end of the program starting at line 870 / 1006, that the program is enhanced within a u2018BIW delta updateu2019 coding
Within the flag u201AActivate/Deactivateu2018 the update process into the delta tables (SnnnBIW1/Sn5nnBIW2) is swichted on/off. In the table u201ATMCBIWu2018 is defined, which table is active for delta update.
Note: The delta updating is client dependent !
Regards,
Ram Pedarla
Edited by: RamPedarla on Apr 1, 2010 10:35 AM
Edited by: RamPedarla on Apr 1, 2010 10:35 AM

BAPIs / Function Modules to access org. structure data?

Hi,
I want to integrate SAP org. structure with external BPM system.
anybody knows how to access org. structure data via RFC or web services?
Thanks in advance.

The purchasing org and purchasing grp can be found in T024E and T024 table.
Regards
Anurag

How to re-configure the actual Hotspot configuration/access information?

Hi,
how c/an I re-configure the acual HOTSPOT configuration/access information? [MBP Retina - late 2012 | OSx 10.8.2]
THX in advance,
NNIE

As you are using verzion DSL connection ….Try this setting on router:
1) Open router set up page using http://192.168.1.1 …..You will see username & password …leave username blank & in password use admin.
2) Under set up look for “mac address clone” sub-tab….. Enable the service & click clone ….click save settings.
3) Click on “status” tab….. if it shows any valid public Ip address try going online…..if it shows Internet Ip as 192.168.1.X. with gateway 192.168.1.1…then
a) Click set up again ….change the Local Ip address from 192.168.1.1 to 192.168.2.1….click save settings.
b) Power down the router then the modem for few seconds …..Power on the modem first …then the router & see you are online or not.
4) If the internet Ip address is 0.0.0.0…click on set up again …change internet connection type to PPPOE…use your DSL username & password …click save settings.
5) Click status & click connect…if shows connected try going online….if not let mw know the error message you are getting on the status screen.
Follow above steps & let me know if it helps or not.

How to archive information structure?

hi,
There are some Archiving Object for information structure in ECC 6.0, however I can't find this in the version ECC5.0 and R/3 4.6C,I want to know if it means we can't archive information structure in these version?
Thanks in advance.
lance

hi,
Thank you so much,that's just what I want,however the transaction may be MCSX.
Lance

Error 4 occurred while information structure S001 was being updated.

Hi experts,
I set up the environment for the 2LIS_01_S001 DataSource (InfoCube 0SD_C01) accordingly these steps (as mentioned in another thread):
1) Activating LIS update - goto OMO1 transaction code
In the Updating Info Structures(S001) - double-click the Updating radio button for Info structure S001.
In the Parameters dialog box select Synchronous updating and choose ok.
2) Goto OLI7 Transaction code - run the statistical update.
3) Goto OLIX transaction code - setup version &( will be copied to actual version 000 for reporting
4)Go back to OMO1 do deactive the LIS Update, check radio button to "No Update"
5)Now goto LBW0 and choose option "Deactivate" Delta updating in LIS.
6) In BW, Replicate DataSource, and run info Package with Initilization.
7) Now again in R/3 we need to "Activate" Delta option from transaction code LBW0.
8) and last step is to goto OMO1 to activate LIS Update to Synchronous updating and save.
But in step 2 , I am getting an error i.e
Error 4 updating info structure S001
Message no. M2022
Error 4 occurred while information structure S001 was being updated.
The update was attempted with the following key:
&V3 0100000000000000290658
I am not understanding this error,so cant proceed further.
waiting for ur replies.
Thanks in advance.

Hi Colum
I have two systems in both i am doing the same process.
But in my one system i am getting error
but in my other system i am not getting error and my set up table is filled with records.
According to that note key figures sequence in S001, S001BIW1 & S001BIW2 should be same.
but i my other system, key figure sequence is different and i am fine working with it.
so why it is not able to fill my set up table for my other system ?
thanks in advance.

Message while creating user defined information structure

Hi Experts,
Iam creating a user defined information structure for flexible planning. I selected the following characteristics.
1. Sales organization
2. Distribution channel
3. Sold to party
4. Plant
5. Material
But I get the following message "Include product groups/materials field for planning hierarchy".
May I know whats the reason for this message and how to solve it.
Please help me here.
Thanks in advance
Pradeep.

Th hierarchy what you created may have some error, please reassign the sequence in hierarchy and check it out, it will work

Unable to review the resource access information

Hi,
I am new to portal. I am runing Oracle Portal Version: 10.1.2.3.0 (Build: 263).
I am able to review or edit my resource access information. However, I only see the blank information when I try to modify the other users. Could somebody let me know what privileges I miss? How do I assign the privileges to my portal group?
Thanks for your help,
Kam

Hi AMN,
Logn on as the portal user, I can see the information. Then I grant all the privileges to that particular user (User B). I still do not see the resource information after log as User B.
I have another user account (User A) that belongs to another admin group. If I log on as User A, I can see the resource information. Then I assign this admin group to User B. Log on as User B, I can see the resource information without any problem. I do not find any privileges differences between User B and the admin group.
I can find the basic information related to the particular admin group, user A and user B information in oiddas.
Could you show me what information I should look for? What priivileges I need to set in OIDDAS or in portal?
Thanks your help,
Kam

HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots. Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
See Pondini's page for more explanation: What are Local Snapshots? http://pondini.org/TM/FAQ.html
I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
You have tested the library on the external drive, and so your photos are save there.
The local TimeMachine snapshot probably now contains a backup of the moved library. Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I am unable to access information from the internet as I am unable to install the lastest adobe flash player that is now required. Can you please help?

I fould a hack that makes the sites think you have the latest (Intel) version of Flash installed. So I installed it & it works with Firefox, TenFourFox & Safari. Here's the info.
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
 Cheers, Tom

Remove 'Access Information OnDemand Services' Button from toolbar

How can I remove the 'Access Information OnDemand Services' Button from the toolbar? I just upgraded BO XI R2 with SP4. I have to remove this button since we are hosting BusinessObjects on servers with multiple clients. They do not need, nor care about this (it will actually confuse them)...

Hello,
This requires modifying JSP files. Please backup all files before mofying them.
Also, to the best of my knowledge this is supported. That said, this does not mean that the modifications will stick through updates/patches. Could someone from BO confirm?
This is how we did it (Java Infoview).
Go to
C:\Program Files\Business Objects\Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\Infoview\main\
Open headerPlus.jsp, and comment out the following section:
<c_rt:if test="<%= isOnDemandInstalled %>">
<fmt:message var="ttOnDemandHome" key='main.home.link.ondemand'/>
toolbarCtrl.add (newIconWidget("btnOndemand",
"<%= context + schema.getUrl(application, "img.toolbar.ondemand") %>", onBtnOnDemandClick,null,
'<%= Encoder.encodeJS((String)pageContext.findAttribute("ttOnDemandHome")) %>', 16,16,3,3,25,3));
</c_rt:if>
There is an alternate way to do the same in the following SAP Note (I have not tested this)
1206230 - How to hide the OnDemand icon in infoview on Tomcat

SD Information Structure

Hi everyone,
I am working with flexible planning in SOP and I would like to find an SD information structure that includes the following key figures:
-Material
-Plant or Shipping point
-Open orders quantity
Could anyone please tell me whether exists any information structure according to my requirements?
Thanks in advance and best regards.
Ben.

Ben,
May I know which position type you are referring to?
Thanks
Krishna.

Accessing Information Structure

Similar Messages

Maybe you are looking for