Accessing internal table ACCIT

Hi Experts,
I am currently working on a substitution exit to substitute cost center in FI line item.
The problem is that the data will only be available when the document is completed, so I put the substitution in complete document level.
Does anyone know whether it is still possible to perform substitution at this level? Since it is necessary for us to perform this substitution.
Many thanks for your kind reply,
Fandi.

A few added information,
My colleague told me that it is possible to do this, but the substitution must be performed to internal table ACCIT which is the accounting posting interface internal table.
How can this be done? As the structure is not recognized in the substitution.
Thanks,
Fandi.

Similar Messages

Accessing internal tables at runtime.

Hi all,
I am writing a code where in i have to transfer data from excel to database table.
Iam getting the excel data in an itab. Can anybody help me with how to access internal tables at runtime ?
i am using the following code with sy-tabix. here, when the sy-tabix is odd it picks up the value,
but i want that within the same loop when i increment sy-tabix by 1, then it should fetch the second column of same row. But its not working as it shows an error that it does not permit subfield access.
the code is as follows:
LOOP AT t_tab[] into wa_tab .
data: l_tabix type sy-tabix,
 name_index type sy-tabix.
 data: c type i.
 l_tabix = sy-tabix.
 name_index = l_tabix+1.
 c = ( l_tabix mod 2 ).
******to check if sy-tabix is odd**********
 if c ne 0.
 READ TABLE t_tab into wa_tab index l_tabix.
 wa_product1-product = wa_tab-VALUE.
************incrementing sy-tabix*************
 READ TABLE t_tab into wa_tab index name_index. (here it shows error)
 wa_product1-product_name = wa_tab-value.
 endif.
endloop.
Thanks in advance.

Hi Omer,
Copy and paste this code.
=====================================
REPORT ztest_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SYST'
CHANGING
ct_fieldcat = it_fcat[].
LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial.
MOVE-CORRESPONDING is_fcat TO is_fieldcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
Test it...
DO 30 TIMES.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
<l_field> = sy-index.
INSERT <l_line> INTO TABLE <l_table>.
ENDDO.
LOOP AT <l_table> ASSIGNING <l_line>.
ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
WRITE <l_field>.
ENDLOOP.

How to access internal table data from webdynpro to Flex application.

Hi Connoisseur
The data transfer from Abap WebDeypro to flex island works well. I followed , there is an example from Thomas Jung (by the way as always Great Work) and Karthikeyan Venkatesan (Infosys) but this example covers simple type only.
There is no example with complex types like arrayCollection which handle the transfer of data from flex to WebDynpro.
i tried to do pass internal table value to flex-datagrid.but its not work.
i would like to know
1.how to access internal table data from webdynpro to Flex application.
2.how to pass the internal table to flex-datagrid.
2.how to pass dynamically in ADOBE flex.
3. how to do Flex is receiving the wd context data?
4. how can we update WD context with FLEX data.
Ple give me sample example and step by step procedure.
Regards
laxmikanth

Hi Laxmikanth,
Please refer this...
Flash island: update complex type from flex
Cheers..
kris.

Accessing internal table of main program inside function module...

I have function module say ZFUNC and main program say ZMAIN and internal table defined as IT_TAB inside ZMAIN but not passed as parameter to Function module ZFUNC.
If I want to access the field value of IT_TAB of main program ZMAIN inside ZFUNC during debugging then, I simply put (ZMAIN)IT_TAB-amount in ABAP debugger and then change it when the debugger is inside ZFUNC.
How can I write code to change the value of internal table of main program in function module ZFUNC instead of doing in debugger ? I guess I have to use some field symbols, but not sure. Please suggest.
Regards,
Rajesh.

Yes, you do need to use a field symbol. Say for example, you had a internal table called IMARC in your program and you want to access it later in a funciton module, you would do something like this.
data: xmarc type marc.
field-symbols: <imarc> type marc_upl_tt.
* Assign an internal table
field = '(ZPROGRAM_NAME)IMARC[]'.
assign (field) to <imarc>.
loop at <imarc> into xmarc.
write: / xmarc-matnr, xmarc-werks.
endloop.
Regards,
Rich Heilman

Accessing internal table declared outside of BAdI implementation

I am working on a BAdI implementation and within the BAdI, I need to manipulate the data of an internal table that is declared in the calling routine. This internal table is not a parameter to the BAdI call. I am wondering is there a way to access the internal table that is not recognized by the BAdI implementation? If so, what's the syntax to do this?
I know in debug mode, I am able to access the content of the internal table by using (Program)Itab. But I get a syntax error when accessing the internal table using (Program)Itab syntax.
Any help is appreciated!

Thanks, Max.
I tried your method, but I am getting a short dump due to type conflict. I think it's because the internal table I'd like to access is declared using the following syntax:
data: begin of itab occurs 0,
end of itab.
Therefore, when processing the assign statement, the field-symbol is being treated as a structure...
I tried to change the field-symbol type to any, but after that, I can't modify the table content using loop at type of syntax..
Do you have any other suggestions?
Thanks very much!

How to access internal table

Hi Experts,
I have moved values from node with attributes in context to an internal table using
node_output_4->GET_STATIC_ATTRIBUTES_TABLE(
importing
table = itab
Now the neccessary values are in itab (internal table).I want to check the itab-id with item_code(user input).
I want to access the itab.Plz guide me.

Hi Ramanan,
With header line statement is not avilable in OO concepts.
So you can use the Node of the context.
If you are read your node means it will automatically generate the code.
In the code it will automatically declares the wa for your context.
generally it looks like,
DATA:
      node_znode2                         TYPE REF TO if_wd_context_node,
      elem_znode2                         TYPE REF TO if_wd_context_element,
      stru_znode2                         TYPE if_view1=>element_znode2 .
From the above code stru_znode2 is the WA.
Then you can define your own Itab based on this structure.
DATA : itab like table of stru_znode2.
Thanks.

How to access a table of SAP standard SAP method from external program

Hi Friends,
I have to access a table and modified it defined in a standard SAP method (PROCESS_INPUT_FILTER) of class (CL_HANDLE_MM).
As we normaly do it in case of Standard program
for example: ('(SAPLMEPO)ett[]') here we are accessing internal table ett defined in SAPLMEPO.
so how we can do the same thing if some thing defined in standard SAP method.
Pl. help.

Thanks for the info guys, it will come in handy.
I need to validate that a number is entered with zero or one decimal place, then make sure it is evenly
divisible by .5 in order to test for whole or half numbers only. If not, I use an alert to
display a message when the user leaves the field.
If there is a better way to achieve this, I am all ears!
Thank you for your time,
Gary

Regarding Internal table and access performance

hey guys.
In my report , Somehow i reduced the query performance time by selecting minimum key fields and moved the selected records to internal table.
Now from this internal table i am restricting the loop
as per my requirements using where statements.(believing that internal table retrieval is more faster than database acces(using query)).
But still my performance goes down.
Could you pls suggest me how to reduce the execution time
in abap programming.
I used below commands.
Read using binary search.
loop ...where statement.
perform statements.
collect staements.
delete itab.(delete duplicates staements too)
sort itab(sorting).
For each above statements do we have any faster way to retrieval records.
If i see my bottle neck at se30.it shows
ABAP programming to 70 percent
database access to 20 percent
R3 system as 10percent.
now how to reduce this abap process.
could you pls reply.
ambichan.
ambichan.

Hello Ambichan,
It is difficult to suggest the improvements without looking at the actual code that you are running. However, I can give you some general information.
1. READ using the BINARY SEARCH addition.
This is indeed a good way of doing a READ. But have you made sure that the internal table is sorted by the required fields before you use this statement ?
2. LOOP...WHERE statement.
This is also a good way to avoid looping through unnecessary entries. But further improvement can certainly be achieved if you use FIELD-SYMBOLS.
LOOP AT ITAB INTO <FIELD_SYMBOL_OF_THE_SAME_LINE-TYPE_AS_ITAB>.
ENDLOOP.
3. PERFORM statements.
A perform statement can not be optimized. what matters is the code that you write inside the FORM (or a subroutine).
4. COLLECT statements.
I trust you have used the COLLECT statement to simplify the logic. Let that be as it is. The code is more readable and elegant.
The COLLECT statement is somewhat performance intensive. It takes more time with a normal internal table (STANDARD). See if you can use an internal table of type SORTED. Even better, you can use a HASHED internal table.
5. DELETE itab.(delete duplicates staements too)
If you are making sure that you are deleting several entries based on a condition, then this should be okay. You cannot avoid using the DELETE statement if your functionality requires you to do so.
Also, before deleting the DUPLICATES, ensure that the internal table is sorted.
6. SORT statement.
It depends on how many entries there are in the internal table. If you are using most of the above points on the same internal table, then it is better that you define your internal table to be of type SORTED. That way, inserting entries will take a little more time (to ensure that the table is always sorted), but alll the other operations are going to be much faster.
Get back to me if you need further assistance.
Regards,
<a href="https://www.sdn.sap.com:443http://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.sdn.businesscard.sdnbusinesscard?u=zwcc%2fwm4ups%3d">anand Mandalika</a>.

Internal error when accessing a table -

Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
Thomas

These are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1                  1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors                                    absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1                 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8                                                   dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM

SM58 : Internal error when accessing a table

Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
Thava

Hi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli

Creating MS- Access data base from the Internal tables data of an ABAP Prog

Hi,
I have a requirement where I have to create Access tables from the Internal tables of ABAP program.
The tables are like Project systems Header data, WBS elements data, Netwrok data, Activity data, Milestone data and Project revunes. I will have the internal tables for these. I want to transfer these tables data into MS-Access tables onto Users desktop.
Please adivce me how to do this.
Thanks,
Prabhakar

HI,
I am trying to create a DB table in the access but I am not successful. The following is the format of the table needs to be created from the ABAP program.
I have created a table with the following format in MS-Access with the name tblHeader. Is it neccessary to create a DB table ( MS-Access) in advance or by using the FM STRUCTURE_EXPORT_ TO_MSACCESS we need to create a structure in MS-Access?
False tblHeader
Field Name Type Length
ProjectDef Text 255
ProjectDes Text 255
Created Text 50
Change Text 50
RespPerson Text 255
Profile Text 255
Plant Text 255
ObjNo Text 255
OverheadKey Text 255
I have created a Z table ZTAB1 with the same format from the SAP fields.
MS-Access Table name : tblHeader
ABAP program Internal table : t_tblheader
Z table Name : ZTAB1.
First I am trying to create a structure in MS-Access with the following FM.
CALL FUNCTION 'STRUCTURE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
LANGU = SY-LANGU
dest = 'PS_ACCESS_1'
TABLES
tabname = ttblheader
EXCEPTIONS
system_failure = 1
comm_failure = 2
OTHERS = 3
Table ttblheader type is DFIES and I am filling the table with only one record and one field i.e TABNAME and the value is ZTAB1.
The source code of the FM is using another FM
CALL FUNCTION 'MSACCESS_STRUCT_ EXPORT_RFC' DESTINATION DEST
Here I am getting the Error message Object required. I can't able to create a table structure in MS-Access.
Next I am going to Use the FM
'TABLE_EXPORT_ TO_MSACCESS'
and it will create the records in the MS-access table.
CALL FUNCTION 'TABLE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
langu = sy-langu
dest = 'PS_ACCESS_2'
tabname = 'ZTAB1'
reftable = 'tblheader'
FLG_NO_DOWNLOAD = ' '
FLG_APPEND = ' '
FLG_POPUP = ' '
TABLES
dtab = t_tblheader
here t_tblheader is the internal table.
Reftable = tblheader is the table which i have created in advance. ( not by using the First FM)
In this FM i am getting a error message : Unable to connect to Database D:\test\db2.
Please help me how to create the MS-Access database.

Internal Table ! Accessing Issue!

Hello Guys!
 Internal table
 Sorted, Hashed, Standard
For accesing itab uses,
 Standard---> uses Linear Search
 Sorted ---> Binary Search
 Hashed-----> Hash Algorithm
 Can u pls tell me what is linear search, binary search, hash algorithm?
 And also,
 Why we mostly go for standard table?
PLs give ur suggestions,
Thanks for your answers
<REMOVED BY MODERATOR>
 Thanks
 Rahul.
Message was edited by:
 Alvaro Tejada Galindo

TABKIND - Internal Table Types
Alternatives:
1. STANDARD TABLE
2. SORTED TABLE
3. HASHED TABLE
4. INDEX TABLE
5. ANY TABLE
Effect
The table type - set in the DATA, TYPES, orCREATE DATA statement, specifies how the system accesses entries in the internal table in generic key operations.
(READ TABLE itab, DELETE TABLE itab, INSERT TABLE itab, MODIFY TABLE itab, COLLECT itab). As a general rule, the runtime required for key operations depends on the total length of the key.
The various table types have the following hierarchy:
 ANY TABLE
 |
 | |
 INDEX TABLE HASHED TABLE
 |
 | |
 STANDARD TABLE SORTED TABLE
Alternative 1
STANDARD TABLE
Effect
Defines the table as a standard table. Key access to a standard table uses a linear search. This means that the timne required for a search is in linear relation to the number of table entries.
You should use index operations to access standard tables.
For the sake of compatibility, you can use TABLE as a synonym of STANDARD TABLE.
Alternative 2
SORTED TABLE
Effect
Defines the table as one that is always saved correctly sorted. Key access to a sorted table uses a binary key. If the key is not unique, the system takes the entry with the lowest index. The runtime required for key access is logarithmically related to the number of table entries.
You can also access sorted tables by index operations. When you insert using an index, the system checks to ensure that the sort sequence has been correctly maintained. For this reason, it takes longer than inserting entries in a standard table. As a rule, you should only access sorted tables using their key.
Alternative 3
HASHED TABLE
Effect
Defines the table as one that is managed with an internal hash procedure. You can imagine a hashed table as a set, whose elements you can address using their unique key. Unlike standard and sorted tables, you cannot access hash tables using an index. All entries in the table must have a unique key. Access time using the key is constant, regardless of the number of table entries.
You can only access a hashed table using the generic key operations or other generic operations ( SORT, LOOP, and so on). Explicit or implicit index operations (such as LOOP ... FROM oe INSERT itab within a LOOP) are not allowed.
Alternative 4
INDEX TABLE
Effect
Standard and sorted tables belong to the generic class index tables. An index table is one that you can access using an index. You can currently only use the table type INDEX TABLE to specify the type of generic parameters in a FORM or a FUNCTION. Hashed tables are not index tables, and cannot therefore be passed to parameters defined as INDEX TABLE.
Alternative 5
ANY TABLE
Effect
Like INDEX TABLE, you use ANY TABLE to specify the type of any generic table parameter. The set of permitted operations for a table with type ANY TABLE consists of the intersection of all permitted operations for STANDARD, SORTED and HASHED TABLEs, and so is identical to the set of operations permitted for hashed tables.
Note in particular that you cannot use index access for tables with this type.

Accessing Dynamic Internal table fields

Hello All,
I have one internal table ep_tabx having 138 columns whose data is getting displayed
by using function module reuse_alv_grid_display.
Now my query is, i have created one custom button on the appl toolbar to download ep_tabx data.
IF the user changes the the layout of the output at runtime and then presses that custom button
then i have created one dynamic internal table using call method cl_alv_table_create=>create_dynamic_table suppose <dyn_table> whose struc will be that of
dynamic fieldcatalog returned by using FM REUSE_ALV_GRID_LAYOUT_INFO_GET.
And then I have put a loop on the int table ep_tabx and move corresponding to the int table
<dyn_table>. But when i download the <dyn_table> data through GUI_DOWNLOAD the
date fields data is not getting downloaded correctly. I have 4 date fields in my ep_tabx.
In the alv grid output the date is getting displayed like 08/30/2004(ie mon/date/yr) but in download
file it comes like 20040830(ie yr/mon/date and that too without /).How to access the dynamic
internal tables fields separately so asto convert them in the pgm before the download.
Kindly Help.
Thanks in advance.
Mansi

Hi,
Search in SDN you would get loads of info on accessing dynamic itab's .
in order to convert your date format use WRITE stmt to convert the value in your itab before passing it to download FM.
Regards,
Raghavendra

Dynamic field access in internal tables

Hi everyone.
I woulkd like to know if there is any way to identify the fields of an internal table at runtime. I'm creating a method in a class, and i would like to accept any itab as a paramter and then access the fields of that itab. I currently have the itab passing no problem using field symbols, and i am able to loop at the data, but i am unsure how to get the field names.
Any suggestions?
Thanks!

Hi,
Check the code below:
REPORT ZYKTEST3 .
DATA: d_ref TYPE REF TO data,
d_ref2 TYPE REF TO data,
i_alv_cat TYPE TABLE OF lvc_s_fcat,
ls_alv_cat LIKE LINE OF i_alv_cat.
TYPES: tabname LIKE dcobjdef-name ,
fieldname LIKE dcobjdef-name,
desc LIKE dntab-fieldtext.
PARAMETER: p_tablen TYPE tabname. -
> Input table field
DATA: BEGIN OF itab OCCURS 0.
INCLUDE STRUCTURE dntab.
DATA: END OF itab.
FIELD-SYMBOLS : <f_fs> TYPE table,
<f_fs1> TYPE table,
<f_fs2> TYPE ANY,
<f_fs3> TYPE ANY,
<f_fs4> type any,
<f_field> TYPE ANY.
REFRESH itab.
CALL FUNCTION 'NAMETAB_GET' -
> Fetches the fields
EXPORTING
langu = sy-langu
tabname = p_tablen
TABLES
nametab = itab
EXCEPTIONS
no_texts_found = 1.
LOOP AT itab .
ls_alv_cat-fieldname = itab-fieldname.
ls_alv_cat-ref_table = p_tablen.
ls_alv_cat-ref_field = itab-fieldname.
ls_alv_cat-seltext = itab-fieldtext.
ls_alv_cat-reptext = itab-fieldtext.
APPEND ls_alv_cat TO i_alv_cat.
ENDLOOP.
internal table build
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = i_alv_cat
IMPORTING
ep_table = d_ref.
ASSIGN d_ref->* TO <f_fs>. -
> Dynamic table creation with fields of the table
DATA: l_field TYPE fieldname,
l_field1 type fieldname.
SELECT * FROM (p_tablen) INTO CORRESPONDING FIELDS OF TABLE <f_fs>.
Fetching of the data from the table
LOOP AT <f_fs> ASSIGNING <f_fs2>.
Here u can check the validations and process
ASSIGN COMPONENT 2 OF STRUCTURE <f_fs2> TO <f_fs3>.
ASSIGN COMPONENT 3 OF STRUCTURE <f_fs2> TO <f_fs4>.
IF sy-subrc = 0.
MOVE <f_fs3> TO l_field.
MOVE <f_fs4> TO l_field1.
WRITE:/1 l_field(20),
22 l_field1(10).
ENDIF.
ENDLOOP.
Regards
Kannaiah

Access db upload to SAP internal table table

Dear friends.
i am supposed to develop a program that upload the MS-Access DB table to SAP internal table. I have received the code wich is ok...but i am failed to provide it porper input as i am not receiving n e values in internall tables. please help me to understand this program i am providing you its source code which i received from this forum only...apart from it, is there n e other alternative to upload the data from MS access to SAP . I have Ms Access Data base db2.mdb as per the prgram and db2.mdb has tab (table). please see the code and help me in this regards..thanking you,,,
REPORT ZYSH01.
INCLUDE ole2incl.
DATA: con TYPE ole2_object,
rec TYPE ole2_object.
DATA SQL(1023).
DATA: BEGIN OF SPL OCCURS 0,
VAL(1023),
END OF SPL.
DATA: BEGIN OF I1 OCCURS 0,
F1(10) ,
F2 TYPE I,
END OF I1.
IF con-header IS INITIAL OR con-handle = -1.
CREATE OBJECT con 'ADODB.Connection'.
IF NOT sy-subrc = 0.
EXIT.
ENDIF.
CREATE OBJECT REC 'ADODB.Recordset'.
IF NOT sy-subrc = 0.
EXIT.
ENDIF.
ENDIF.
MDB connetion infomations ....
CONCATENATE 'Provider=' '''Microsoft.Jet.OLEDB.4.0''' ';'
INTO SQL.
CONCATENATE SQL 'Password=' '''''' ';'
INTO SQL.
CONCATENATE SQL 'User ID=' '''Admin''' ';'
INTO SQL.
CONCATENATE SQL 'Data Source=' '''C:\db2.mdb''' ';'
INTO SQL.
CONCATENATE SQL 'Mode=' '''Share Deny None'''
INTO SQL.
MDB connection ...
CALL METHOD OF CON 'Open'
EXPORTING #1 = SQL.
Query (insert) statement ...
SQL = 'insert into [test] values('.
CONCATENATE SQL '''A''' ',' '''1''' ')' INTO SQL.
Query run ...
CALL METHOD OF REC 'Open'
EXPORTING #1 = SQL
#2 = CON
#3 = '1'.
Query (select) statement ...
SQL = 'select * from[test]'.
Query run ...
CALL METHOD OF REC 'Open'
EXPORTING #1 = SQL
#2 = CON
#3 = '1'.
Selecting MDB record into SAP internal table ...
DO.
CALL METHOD OF REC 'getstring' = SQL
EXPORTING #1 = '2' "Do not modify!
#2 = 1 "Do not modify!
#3 = '|' "Do not modify!
#4 = '|'. "Do not modify!
IF SUBRC EQ 0.
REFRESH SPL. CLEAR SPL.
SPLIT SQL AT '|' INTO TABLE SPL.
LOOP AT SPL.
CASE SY-TABIX.
WHEN 1.
I1-F1 = SPL-VAL.
WHEN OTHERS.
I1-F2 = SPL-VAL.
ENDCASE.
ENDLOOP.
APPEND I1. CLEAR I1.
ELSE.
EXIT.
ENDIF.
ENDDO.
Result writing ...
LOOP AT I1.
WRITE: AT /1(10) I1-F1,
AT (10) I1-F2.
ENDLOOP.
connetion close & destroy
FREE OBJECT con.
FREE OBJECT rec.

Hi,
Make one proves, but:
CALL METHOD OF CON 'Open'
EXPORTING #1 = SQL.
return -> sy-subrc = 2.
Please, helpme.
Thank you.
Arecio

Accessing internal table ACCIT

Similar Messages

Maybe you are looking for