Accessing ip in browser

when I punch in the URL of the browser, I am able to get to log in with the default username and password... however, the configuration page is absolutely mangled and links don't display properly in IE or Firefox, and I am unable to change my settings.. Am I missing a plug in or something?
Any help would be greatly appreciated,
- westwood

Clear your browser cache and disable all the firewall on the computer. If the same issues continues then you may have to upgrade the firmware on the router with tftp.exe utility from the site ftp://ftp.linksys.com/pub/networks . Then upgrade it.

Similar Messages

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

I want to airplay from macbook pro to apple tv. What are the possibilities? Does it allow me to play movies or videos I access through the browser as well?

Welcome to the Apple Community.
Only content in your iTunes library can currently be sent via AirPlay from your mac.

I am unable to access Elements Inspiration Browser in Elements 10 Editor

Does anyone know why I can't login (using my Adobe Id) when trying to access Elements Inspiration Browser from the Editor?

Photoshop.com and the IB are dead and gone, have been for well over a year. There is nothing to log in to anymore.

An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.

I have 2 WFE behing F5 that handles ssl termination too. I have a site abc.xyz.com.
At aam i have
http://abc.xyz.com in default zone and https://abc.xyz.com in internal zone.
AT sharepoint content source; I have both http and https of the above site version.
DNS entry of abc.xyz.com is pointing at VIP in f5 which load balances this site at 2 different ips assigned to each web front end server.
Now when i run search in this content source, searchable item populates but there is error for http request telling An unrecognized HTTP response was received when attempting to crawl this item. Verify whether the item can be accessed using your browser.
Why is this happening?
Is it because requests are coming to f5 as https but search is returning it as http? Will SSL termination removal from f5 solve this issue which i really don't want to do? Will pointing dns entry to two ips in wfe instead of f5 VIP will work?
Adit

Hi,
I have seen a similar post from you, my understanding is that when you ran search in your content source, there was an error. You can take a look at the following thread:
http://social.technet.microsoft.com/Forums/en-US/94e999e3-4128-4674-97dc-e46e71fe0f46/search-service-setup-behind-f5-an-unrecognized-http-response-was-received-when-attempting-to-crawl
Best Regards,
Wendy
Wendy Li
TechNet Community Support

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari

After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages

Settings > General > Reset > Reset Network Settings.

I have a new printer which behaves OK except it will not print directly from a web site accessed via Firefox. We do not have this problem if accessed via another browser. Suggestions?

New printer is Brother MFCJ615W. OS is XP. Computer is quite old Dell. Printer also refuses to print pictures from .jpg files - but the fact that I can print direct from web sites accessed via another browser suggests some of the problem is with Firefox. I asked this a few days ago and got an email reply giving me a link to click on - but this only produced an error message.

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

BO 4.1 LCM not able to access through Web Browser

Hello Folks,
I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
I have problem while connecting to LCM through below link.
localhost:8080/BOE/LCM
Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
404 Missing Page
The page you requested is not available on this web server for one of the following reasons:
The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
If the problem still persists, please:
Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
Contact with SAP BusinessObjects Customer Support.
Thanks
venkat

Hello Jawahar,
Thanks for your reply.
Your right from 4.0 its a Promotion Management activity with LCM.
Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
Please anyone help me how to do rectify this.
Thanks
venkat

Is there a way I could access all previous browsing sessions? Are they stored in the C: drive somewhere?

Does Firefox saved all my browsing sessions so that I could access them anytime? I heard about session cookies, but I don't know whether that helps as there are no dates on them, is there? Or are the browsing sessions stored somewhere on my computer?

Welcome to the Apple Community.
Unfortunately, iCloud does not offer equivalents to Mobile Me’s iDisk, Gallery or Web Hosting services. You will need to find a third party solution to replace these services. You might consider DropBox, SugarSync, MediaFire or any other service that offers online storage. (not all these alternatives offer all the services previously provided by iDisk)

Accessing Servlets in Browser

Hi all
I am new to servlets and till now everything went well but one thing! :)
I am trying to access a servlet I did through the browser. When I added the servlet class to the ROOT/WEB-INF/classes dir I could access the servlet by typing http://localhost:8080/servlet/HelloWorld such that HelloWorld is the name of the class. This all went ok and I accessed the servlet with success.
Now I wanted to put my servlet in another directory. I created a dir called my-servlets under the dir webapps of TomCat 5.
Inside I created a dir WEB-INF. In the web.xml file I specified the servlet HelloWorld and the mapping. If I try to access the servlet in the browser through the mapping it works fine.
But if I do http://localhost:8080/my-servlets/HelloWorld and HelloWorld is the name of the class I get an error: The requested resource is not available.
My question is: If I have my servlet in another dir than the ROOT I cannot access it through the class name? Or am I doing something wrong?
With best regards,

Try
http://localhost:8080/my-servlets/servlet/HelloServlet
The /servlet/ is a key to a special handler that loads servlets rather than a directory that holds servlet classes.
Also, make sure that you didn't stuff HelloServlet into a package. If you did, you'll either need a url-mapping in the web.xml file or a fully-qualified classname in the url.
For example, if HelloServlet is in 'mypackage', you'd use:
http://localhost:8080/my-servlets/servlet/mypackage.HelloServlet

Unable to access webmail in browser and Mac Mail

I am a Mac convert from PC and I love my Macbook Pro with Retina display that came with Mountal Lion. Until recently after my visit overseas, I am neither able to access my ISPs webmail through Safari or Firefox on my laptop nor through Mac Mail app with unchanged settings provided by Road Runner, such as webmail.kc.rr.com, apop-server.kc.rr.com/smtp-server.kc.rr.com/110/25. Safari is too slow and hangs with connection errors for webmail. My ISPs id is my business id I use as I travel overseas constantly. I spent several hours and had my spouse call in local tech support and it is a pain having to call your spouse to login and forward email to a public email. Any help is appreciated as my ISP has been anything but helpful in resolving this issue blaming the OS.

Thanks for your reply, Sig. I spent over three hours with my ISPs support tech, deleted and added my account, and even rebuild was of no avail. From Terminal, I am able to ping and I get an IP address but when I try connecting to webmail server, the browser returns an connection error, in Mac Mail I get the following message,
"Unable to receive Mail -
There may be a problem with the mail server or network. Verify the settings for account “Road Runner” or try again.
The server returned the error: The connection to the server “pop-server.kc.rr.com” on port 110 timed out." The tech asked me to check with the local ISP who directed me to ask Road Runner to clear the block off SMTP port.
I have not used mail2web until now, but would give it a try if it resolves my issue. Thanks for your help and assistance.

Cannot Access IP Web Browser Configuration Page OfficeJet 8600 Plus

Win 7 64-bit
HP OfficeJet Pro 8600 Plus
Wireless Connection
Hi:
The printout of wireless network test page shows IP address for HP Officejet Pro 8600 Plus as: http://192.168.1.104 (The HP Home Network Diagnostic Utility v4.3.0.002 also shows: 192.168.1.104)
When I try to access http://192.168.1.104 with either IE 9 or Firefox 10 I get an error message: "The website is unable to display the webpage"
But, on the same computer I CAN access http://192.168.1.103 HP Officejet 6480 web browser configuration page with either IE 9 or Firefox 10
Why I can't access the web configuration page: http://192.168.1.104
Thanks
FYI: I set the router to various other network modes, channel widths, channels and ssid broadcast on/off, and also removed power from router and printer, reconnected power and restarted computer, all these efforts did NOT allow access to http://192.168.1.104
This question was solved.
View Solution.

On the front of the printer: Setup > Network > Wireless Setup Wizard. Run it.
Next, on your PC, delete all instances of your printer in Control Panel > Devices and Printers.
Finally, re-add the printer this way:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problem accessing em via browser

Hi,
Anyone know what the problem? I got the error message from the sysman/log folder. Anyone know where i can find the documentation of the setting up of oem?
Beside starting the dbconsole service, what others services and things need to be started or done before i can use em via browser. (http server, any agents, set up repository)
Currenlty I managed to load the http://<host>:5500/em page. Although the database instance is already started up, the web page still indicate that the db instance is down and need to be started up.
Check the sysman/log folder and found the below error message from the trace files. Anyone know what the problem?
2005-03-28 12:47:44 Thread-5 ERROR command: nmejcn:
received no status header from epository at
http://slasun11:5501/em/upload/ sponse header from repository
Thread-810 ERROR pingManager: nmepm_pingReposURL:
Did not receive a response header from repository

According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

WRT160n cannot access via web browser

After i unchecked the acces the router through web browser box and saved setttings now I cannot get back in. I know this was a dumb mistake. I did this so I counld access my web cam. Every time I tried to access the cam the router sign in screen came up. Well now the cam orks but not the sign in screen. Please help. I really don't want to push reset because I don;t remember the settings AT*T told me to change to use the router with their Modem.

Are you getting any error message...?
Are you trying to access the router's setup page...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...If you setup your own password and you don't remember the password then,you have to reset the router.

Cannot access my internet browser on 8520 curve

Please cannot someone help me.
Over the past two days I have not been able to access my brower (8520 curve), can someone please explain why? I can enter a www address but it just reads "loading", the little black box in the top right corner flashes then stops, disappears and nothing else happens. I end up closing it the browser down.
I would be very grateful if someone could help.
Thanks.

Hi there!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your carrier for formal support.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't access CMS thru browser....

Hello, I've tried countless times to access my switches thru CMS web access but to no avail. I have tried with Java 1.3, 1.3.1, and 1.4 and still no luck. I keep getting a lot of class not found errors and error while parsing files. Does anyone know how to fix this? Any help would be appreciated. Thank you.
PS: I can telnet to the switches fine.

Browsers
Netscape Communicator 4.75 and 6.2
Internet Explorer 5.5 and 6.0
Java Plugins
Versions 1.3.0, 1.3.1, 1.4.0
You will need to have a compatible Java (JRE) Plug-in installed in your browser
http://www.cisco.com/en/US/products/hw/switches/ps628/products_data_sheet09186a00800913ce.html#wp39559

Accessing form and browser fails to initiate jit

I am trying to access our application and i notice on some machines that j initiator fails to initiate on some machines and therefore does not display the page. Is there some sort of settings that i am missing. Why would the application work on some machines and not the other
Help
Thanks

Hi,
I believe that JInitiator requires admin privileges for installation on Windows 2000. Also check Browser security settings.
Gerald

Accessing ip in browser

Similar Messages

Maybe you are looking for