Accessing multiple systems in NWBC

Hello,
i found this treath Part 2 - Accessing multiple systems in NWBC
but in my case i habe only one WD Application wich will be configured in PFCG and in this WD Application will 2 Subtables used and one of this subtables should display an other WD Application from an extern System
in Subtable A need to call WD Application from System A (Main system)
and in Subtable B need to call WD Application from System B ( extern System)
is this possible by using Variant and not RFC? if yes how can I do this?
Thank you very much
regards
Aga

Hi Agadir Ofla
Construct URL of those 2 WD applications and call it using an iFrame in your main WD App.
Your PFCG WD Application need to have 2 iFrames in the first view.
Create a node with 2 string parameters(Source 1 and source2).
Bind source1 and source 2 to the corresponding iFrames UI's (Property:source)
Build URL for those 2 WD application, in init method of component controller or View Controller.
Bind it to the node (created in step 2).
Please find below screenshot, where tried with 2 different URL's in a single view using iFrame.
For more info on iFrame, please refer this: IFrame Properties - Web Dynpro for ABAP - SAP Library
Regards,
Meganadhan S.

Similar Messages

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the bad template with a blank.

I no longer have access to system folders that allow me to remove old or incorrect PAGES templates. Need to find out how to do that. The only way I can do it now is to blank the template and replace the unwanted template with a blank. It was previously possible to go to MY TEMPLATES and remove the unwanted templates. I don't if this issue is before or since installation of 10.8 (a nightmare in my case, which led to significant failure issues). And because I haven't tried to remove templates since finally managing to install 10.8 (now at 10.8.4), I don't know if this is typical of the newer OS or a problem. I've been a Mac user for more than 25 years, but I think I'm nearing the end of the road. By the way, I've never needed to do this before because the manuals always offered an answer... they don't seem to do that anymore. In any case, I don't know how this works... I'd prefer an email reply if that's possible. But that would probably be too easy, and I don't know how to get a reply.

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

RE: Accessing multiple Env from single Client-PC

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Look in the "System Management Guide" under connected environments page
72. This will allow services in your primary environment to find
services in your connected environment. However, there is a bug
reported on this feature which is fixed in 2F4 for the HP and H1 for all
other servers. The following is from Forte:
The connected environments bug that was fixed in 2F4 is #24282. The
problem
was in the nodemgr/name server source code and caused the following to
occur:
Service1 is in connected envs A and B.
Client has env A as primary, B as secondary.
Envmgr A dies before the client has ever made a call to Service1.
Afer env A is gone, client makes a call to Service1 which causes Envmgr
B to
seg fault.
You should upgrade your node manager/env manager nodes to 2F4. The 2F2
development and runtime clients are fully compatible with 2F4 servers.
Kal Inman
Andersen Windows
From: Inho Choi[SMTP:[email protected]]
Sent: Monday, April 21, 1997 2:04 AM
To: [email protected]
Subject: Accessing multiple Env from single Client-PC
Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Accessing multiple Env from single Client-PC

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Hi, All!
Is there anybody has any idea to access multiple environments from
single client-PC? I have to have multiple environments because each
environment resides geographically remote node and network bandwidth,
reliability are not good enough to include all the systems into single
environment.
Using Control Panel for doing this is not easy for those who are not
familiar with Windows. The end-user tend to use just single application
to access all necessary services.
I could consider two option to doing this:
1. Make some DOS batch command file to switch different environment
like, copying back/forward between environment repositories and
set up forte.ini for changing FORTE_NS_ADDRESS. After then, invoke
proper client partition(ftexec).
2. Duplicate necessary services among each environment.
But, these two options have many drawbacks in terms of system
management(option 1), performance(option 2) and others.
Has anybody good idea to implement this? Any suggestion would be
appreciated.
Inho Choi, Daou Tech., Inc.
email: [email protected]
phone: +82-2-3450-4696

Accessing Multiple Forms - Form Already Exist

Hi,
    I created Screen (For Add-on) through screen painter which I can access from Purchase order Sub Menu. I can able to access only one screen at a time. Am getting Error u201CForm already existsu201D while accessing second time from menu. I can able to get the screen only after closing current active screen. Cant able to access multiple times Like Normal SAP Screens. Whether itu2019s possible to access Multiple Screen like normal SO, PO screens?

Ganesh,
You have to give the form an unique ID before you load it.
Use the following functions to achieve this:
Private Function LoadUniqueFormXML(ByRef oCompany As SAPbobsCOM.Company, ByRef oApplication As SAPbouiCOM.Application, _
            ByVal FileName As String) As String
        Dim xDoc As System.Xml.XmlDocument = New Xml.XmlDocument
        LoadUniqueFormXML = ""
        Try
            xDoc.Load(FileName)
            LoadUniqueFormXML = xDoc.SelectSingleNode("Application/forms/action/form/@FormType").Value & "_" & _
                MaximoTipoForm(oCompany, oApplication, xDoc.SelectSingleNode("Application/forms/action/form/@FormType").Value).ToString
            xDoc.SelectSingleNode("Application/forms/action/form/@uid").Value = LoadUniqueFormXML
            oApplication.LoadBatchActions(xDoc.InnerXml)
        Catch ex As Exception
            oApplication.MessageBox(ex.Message)
        End Try
    End Function
Private Function MaximoTipoForm(ByRef oCompany As SAPbobsCOM.Company, ByRef oApplication As SAPbouiCOM.Application, _
            ByRef Tipo As String) As Long
        MaximoTipoForm = 0
        Try
            For Each iform As SAPbouiCOM.Form In oApplication.Forms
                If iform.TypeEx = Tipo Then
                    If iform.TypeCount > MaximoTipoForm Then
                        MaximoTipoForm = iform.TypeCount
                    End If
                End If
            Next
            MaximoTipoForm = MaximoTipoForm + 1
        Catch ex As Exception
            oApplication.MessageBox(ex.Message)
        End Try
    End Function
Public Function LoadForm(ByRef oCompany As SAPbobsCOM.Company, ByRef oApplication As SAPbouiCOM.Application, _
             ByVal FileName As String) As SAPbouiCOM.Form
        LoadForm = Nothing
        Try
            Dim FormUID As String = LoadUniqueFormXML(oCompany, oApplication, sPath & "" & FileName)
            '// Apanhar o formulário carregado, através do seu ID exclusivo
            LoadForm = oApplication.Forms.Item(FormUID)
        Catch ex As Exception
            oApplication.MessageBox("LoadForm(" & FileName & "): " & oCompany.GetLastErrorCode & ", " & ex.Message)
        End Try
    End Function
To open a user form with an unique ID, use this code
Dim oForm As SAPbouiCOM.Form
oForm = LoadForm(oCompany, oApplication, "XMLFormFile.srf")
Regards,
Vítor Vieira

UWL - conditional accessing of systems

Hello All,
I have configured the UWL system to retrieve data from 2 MDM repositories. Every portal user is not going to have access to both the MDM repositories. How can I stop UWL from retrieving data from both the repositories?
Currently the UWL is retrieving the data from the MDM system for which there is a User Mapping. But for the other UWL is displaying an error message. I need a way to restrict this behaviour (because the error message makes the end user confused).
Thanks in advance,
PKS.

Hi,
when you create a UWL system you have got the possibility to restrict access to this system. Have a look at the parameter "User Roles". There you can determine for which set of users the UWL should access this system.
For example, you can assign a portal role here, such as buyer. Only users with the role buyer will see items from the provider system in UWL. You can have multiple user roles separated by semi-colon.
Find detailed information in the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/92/a88931f2dd4631b9e8d530697d89c9/frameset.htm">SAP Library</a>.
Best regards,
Martin

HT204053 How do I access multiple iCloud accounts

How do I access multiple iCloud accounts with a single IPAD?

You can set up an additional "secondary" iCloud account by going to Settings>Mail,Contacts,Calendar>Add Account>iCloud and entering the ID and password. There are some restrictions on secondary accounts.
Only the primary account can be used for Photo Stream, Bookmarks, Documents, iCloud Backup and Find My iDevice. Also, Push Mail only works for the Primary Account; Secondary Account Mail is Fetch.

Accessing multiple portals at the same time?

Is it possible to access multiple portals at the same time?
For example, what I want to achieve is different properties (layout,
portlets, look & feel) for different groups of users accessing the same
portal. The Associated Groups part on the Portal admin page is not
fulfilling our requirements. So we decided to have different portals for
different groups of users, all working through one portal, and accessing
their custom portals. Is this achievable?
What we are thinking is: put the common functionality in the repository
portal directory, and the custom portlets/jsps in the group-specific portal
directories. This way we can customize portal behavior for different groups
of users. Is this achievable?
Thanks.
Amit

You have to user respective DRILL commands present in WAD to configure the drill operations on multiple characteristics...

How do i access multiple bex queries in one crystal reports??

Hello Experts,
I have 10 cubes and 30 bex queries on it and i need to create 3 final crystal reports on these 30 queries.
I am on BI 4.0 & CR 2011. but my client is not on correct SAP patch ie., he is on 15+ but he must be on 23+ to access multiple bex queries on CR 2011 Database expert. (I am unable to see bex queries in Database expert to link couple of bex queries)
And my client env doesnt have SAP EP for SAP BW Netweaver Connection to create a connection to access cubes or queries in IDT.
Do my client env need EP? so that SAP BICS Connection will work in IDT?
How do i approach to achive this...
Thank you...

Hi,
have you checked the option "allow external access" in your query? SAP Toolbar will find all queries but the database export needs this flag to be set.
Using multiple queries within one crystal report is using the "multi database join feature" of crystal reports. You can link your queries by key fields and crystal will join them in memory. So when there are many queries or many datarows this can be a huge performance killer.
Actuallly one of our customers is running a report which has more than 20 BEx queries linked together. It runs just fine.
Please be sure to set your joins correctly. E.g. crystal will try to make a join on the "key figures" sturcture if you let it create a suggestion or it will try to link on all fields of an infoobject. This will bring MDX errors.
So you should be setting your joins correctly - the [infoobject]-[20infoobject] fields are fine for that.
I hope you can use some of my words.
Regards
Thorsten

Fiori: incorrect alias used when multiple system aliases assigned

Hello all and Masayuki Sekihara
I'm implementing SAP Fiori PO/PR/Contract approval.
There is only 1 gateway system currently in order to support 4 ECC systems.
(Sandbox, development, quality and production)
Everything is working correctly when assigning only one (Sandbox) SAP system alias to the gateway service of PO approval for example.
However when we assign multiple system aliases and set the sandbox system alias as default things go wrong.
(Currently IW_BEP is not yet installed on the development; Quality and productive system)
And we noticed the service is resulting in an error message because these BEP function modules can not be found on the target system.
However the issue is that it should not call these systems as we have flagged Sandbox system as default.
Anyone has an idea or note for this?
(We temporary fixed this by assigning only a single alias to the services).
But in a later phase we want to add all in order to be able to test on all systems and run production as default.
Thanks for your help.

I don't want to use the MOC.
I want the behaviour like mentioned in the note:
The default system is used whenever the service is not called as MOC. If you have defined more than one default system alias, the first system is used as the default.
How can I achieve this?
According to my understanding now I should make sure ";m"o is not added to the URL, but how can this be achieved?
Thanks!

How can I create manual Y-axis labels in a multiple system report?

A similar question was asked by Lutz1410 on 3/30/07, but it doesn't seem that this was finally resolved. I'll try to ask the question in a different way.
I created a graph in View with 3 axis systems in the "multiple systems" mode, then transferred this to Report. I would like to apply manual scaling and text to each of the 3 axis systems, however if I change either of these parameters they are applied to all 3 Y-axes. In other words, I end up with 3 axes having exactly the same text labels and scaling.
1. For the axis text, is there a delimiter that can be used in the axis text field to tell Report that the first text value is for the first Y-axis, the 2nd value is for the next axis, etc?
2. For the scaling, is it possible to have separate scales for each Y-axis?
Of course, a workaround is to create 3 independent graphs in Report, but this is less convenient.
Thank you,
Craig

Hi Craig,
If you want to apply different manual scaling parameters to each of the stacked Y axes, then you need to use 3 separate Y axes. If you want to display a curve-specific text to each of the stacked graphs, this you can do with a DIAdem expression:
@ChnName(CCN)@@         channel name of each curve
@ChnDim(CCN)@@            channel unit of each curve
@ChnComment(CCN)@@   channel description of each curve
The corresponding value for each curve will automatically display at the correct vertical spot next to its curve.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Accessing multiple PSD layers in Adobe Photoshop Touch from Creative Cloud is important to me.

Accessing multiple PSD layers in Adobe Photoshop Touch from Creative Cloud is important to me. When will Touch be updated with this function? Want the ability to view multiple layers the same way Creative Cloud website can. Having the ability to turn multiple layers on an off in Touch from and uploaded PSD file. As it stand Touch flattens imported Layered PSD files. (Not very useful)

Hi Bford225,
I moved your post over to the Photoshop Touch forum because it seemed mostly about Photoshop Touch.
Currently, I'd recommend converting RAW images to Jpeg in either Photoshop or Lightroom and then uploading them to Creative Cloud for working with them in Photoshop Touch. I know raw support is something our developers are considering so please add your vote here:
http://forums.adobe.com/ideas/1227
How you best incorporate Photoshop Touch into your workflow is hard to say. What works best for one person may not be true for everyone. Photoshop Touch obviously doesn't have all the capabilities of its desktop counterpart but it does have the ease of use and portability of being on a tablet. Personally, I like using Photoshop Touch for editing images taken with the iPad or my iPhone for convience versus transferring to transfer to the computer, or even if I still do, I can do some of the initial edits from the tablet first. Its nice when I only have the tablet available and not a computer. For images I take with my DSLR I always do my editing in Photoshop and Lightroom. I'm able to make any adjustments on the computer much faster than on a tablet.
If you have the option to shoot in both Jpeg and RAW that might be good option (best of both worlds). Do you have the ability to import images from the camera without using a computer - using a camera connectivity kit or something like that? My recommendation would be expermentation, test out different workflows on the tablet and see how you like it and find what works best for you.
-Dave

ICH : SXMB_ADM - F7 Check says "No access to system landscape at present"

Hi
When I perform following :
tcode sxmb_adm -> Integration Engine Configuraion -> Check (F7)
I get "No access to system landscape at present"
This on our ICH-server.
Same check on the PI-server (X) is successful.
The SLD used is the same for both servers. I.e same url-address in "corresponding integration server".
Role of business system for ICH = Application system
Role of business system for PI = Integration server
Anyone that knows how to correct this? Some refresh, cache update or similar that must be performed?
/Regards
Joakim

Hi,
please run transactin sldcheck on the abap to see where the problem is.
Did you :
- run and configure transaction sldapicust
- the rfc connection pointing to the sld server
Kind regards,
Andreas

No access to system landscape at present

Hi
I am trying to establish connectivity between ECC and PI. I am in SXMB_ADM of ECC and under Global Configuration Data, I put the role of business system as Application System. Now when I click on the Systel Landscape, I am getting an error " No access to system landscape at present". How should I solve this?
What do I enter next to corresponding Integ server ?
Regards

Hi,
Check in SLDCHECK, from R/3 side, if everyhting is ok.
You may want to check:
#1143810 - Troubleshooting SLDCHECK - Releases 71X
Second point, check note below to about the components in SLD, if they are correctly registered.
#1334053 - No automatic PI 7.10 SLD Registration
And take into account the following notes mentioned in the note above:
#1117249 - Incomplete Registration of PI components in SLD
#764176 - Error in XI due to inconsistent SLD contents
Last recommendation, open the Exchange Profile and change all parameters that ends in *.name to FQDN, and don't forget to restart the system to activate the changes.
For more information about the FQHN, check the notes below:
#773830 - FQHN determination in ICM
#654982 - URL requirements due to Internet standards
Also ensure to apply the FQHN as per instructions on the note below:
#804124 - HTTP communication with XI Adapter Engine fails
And check for the parameter 'com.sap.aii.connect.integrationserver.sld.name' from note:
#1278563 - Specification of message server host in Exchange Profile
Regards,
Caio Cagnani

Different manual y-axis in multiple systems

Hallo,
i "ve some problmes to generate a report in Diadem. I have measured values, 600.000 datapoints in 2 channels, current and pressure. The measured values are in a wide range, but i have to lock for the small signal behaviour, so i have to zoom in small x/y areas. The founded points of interest must documented, so i use the function "transfer to report". While i look the data in n-systems i get a report with lines in multiple systems. The problem is the Y-scaling, the scaling is automatically to the whole range of the data, but i want the Y-scalling of the small y area. If i want to rescale manually i found only 1 y-axis, but i see two different y-axis. After rescale manually the scaling is for both axis the same. If i go back to automatically scalling the scaling is different but the same porblem like before, scaling to whole datarange.
How is it possible to have two different manual y-scallings in a multiple systems diagramm with two data-tracks.
best regards
Lutz

Hi Lutz,
I sort of understand what you're talking about, and this sounds like something we should be able to configure correctly in REPORT. I won't fully know what you mean until you send me a data set and the TDR layout file that you're struggling with.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Accessing multiple systems in NWBC

Similar Messages

Maybe you are looking for