Accordion not going completely as planned

I am quite new to SPRY and the first widget i tried is the
accordion. for the tabs i made three stages of graphics 1 for the
off state, on state and selected tab state. All is going well
except for when it comes to the focused state where you scroll over
the tabs, the On state button doesn't want to show... have a look
www.babyhomestead.com/to/new pay no attention to the five
horizontal buttons across the top, when i get this accordion thing
figured out, they will be removed.
So basically i want to make the "lit up" arrows on the right
to turn on when you hover over them when the accordion is in the
focused state. Do i even need a focused state? i tried adding
another CSS style
.AccordionFocused .AccordionPanelTabHover{
background-image: url(../../maingrfx/tabs/tab_on.gif);
hoping that would do it, but it didn't.
I also noticed for Firefox, that the focus state doesn't even
work all together.. so i have to ask the question again, do i
really need to keep the focused styles?
Thanks in advance,
David.

The accordion behaves very well in all browsers with the exception of IE. When there is no DOCTYPE assigned to your document IE goes into Quirks mode.
Just add the following to the very first line (no blank lines prior) of your document
<!DOCTYPE html>
Gramps

Similar Messages

Project Server Task Approvals not Going into Plan

Hi,
After approving a task, we are finding that it is not going into the plan - on our separate test environment, the same steps work ok.
Any ideas?
Thanks

Hi,
Could you please let me know, if the issue is happening for only one projects or all the projects.
Also, Check for failure transactions.
select
ASSN_UID,
* from pub.MSP_ASSIGNMENT_TRANSACTIONS
where ASSN_TRANS_STATE_ENUM
=4 and
proj_uid like'Proj_Uid'
Also let me know on which patch level you are on?
Check if you have any projects affected with lost resource bug
http://blogs.technet.com/b/projectsupport/archive/2014/02/06/project-server-2013-and-project-online-what-happened-to-my-resources.aspx
SELECT DISTINCT A.PROJ_UID, P.PROJ_NAME
FROM DRAFT.MSP_ASSIGNMENTS A
LEFT JOIN DRAFT.MSP_PROJECT_RESOURCES PR ON A.RES_UID = PR.RES_UID AND A.PROJ_UID = PR.PROJ_UID
INNER JOIN PUB.MSP_RESOURCES ER ON A.RES_UID = ER.RES_UID
INNER JOIN DRAFT.MSP_PROJECTS P ON A.PROJ_UID = P.PROJ_UID
WHERE PR.RES_UID IS NULL
UNION
SELECT DISTINCT C.PROJ_UID, P.PROJ_NAME
FROM DRAFT.MSP_PROJECT_CALENDARS C
LEFT JOIN DRAFT.MSP_PROJECT_RESOURCES PR ON C.CAL_UID = PR.RES_UID AND C.PROJ_UID = PR.PROJ_UID
INNER JOIN PUB.MSP_RESOURCES ER ON C.CAL_UID = ER.RES_UID
INNER JOIN DRAFT.MSP_PROJECTS P ON C.PROJ_UID = P.PROJ_UID
WHERE PR.RES_UID IS NULL
ORDER BY P.PROJ_NAME
Thanks,
Phani

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

See #C12 in Time Machine - Troubleshooting

I just received my i phone 4,inserted Amayim with 4G plan,but showing noservice and bar with emergency calls only screen.Also when i down loaded i tunes to my laptop (windows7) there is an error(9808) message saying i tunes store not supported completely.

i just received my i phone 4,inserted Amayim with 4G plan,but showing noservice and bar with emergency calls only screen.Also when i down loaded i tunes to my laptop (windows7) there is an error(9808) message saying i tunes store not supported completely.

first of all the iphone 4 is not a 4G phone
second it sounds like your iphone could be locked to another operator then the sim you have inserted

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution?

I recently purchased Macbook air mid 2013. Leftside usb port is not working. I think the USB is not going inside completely. What is the solution? someone can help?

Invoke your warranty and take it back.

Complete list of phones that DO NOT require a data plan

Hello.
I am looking for a complete list of phones (old and new) that DO NOT require a data plan. I have five lines with 2 of them requiring the $30 plan and 2 more of them requiring the $10 plan. The fees are killing me and I just want basic phone and text service.
Pre-paid phones are out of the question as they no longer allow them to be used on a regular plan unless they have been in service for 6+ months.
Thank you.

These are all the feature phones that we currently offer. Feature phones are phones that do not require data features of $9.99 or $29.99.
Verizon Wireless CDM8975
LG Accolade™
LG Cosmos™
Pantech Jest™
Samsung Gusto™
Samsung Gusto™ in Purple
Verizon Wireless Salute™
Verizon Wireless Escapade®
Samsung Haven™
Samsung Intensity™
Samsung Intensity™ II in Metallic Blue
Samsung Convoy™
Motorola Barrage™
Motorola Barrage™ Non–Camera

LMS not reporting complete for slide views

Hi,
I am trying to get my captivate projects to report competion status as complete to the LMS based on slide views. For testing I have created a very simple two slide Captivate. Both slides have 3 second durations, one caption each and nothing else, so the whole project runs for 6 seconds without any pauses, quizes or interactions of any kind. I have used SCORM cloud to view the SCORM calls being made by the package, and it is not reporting completion to the LMS.
I am using the following settings in reporting:
Any help will be really appreciated. Im about to watch http://www.adobe.com/cfusion/event/index.cfm?event=set_registered&id=1775550&loc=en_us to see if that can help. My backup plan is to put an interaction on the last slide but that's going to mess with my quiz results for the projects that do include quizzes (This is also why im reporting Quiz Results and Slide Views).
Note: with these settings, passing a quiz causes the captivate to report completion.
Thanks for any help
Andrew Downes

I'm not sure of this and defer to any contrary/additional replies that may follow...but...
Past versions of CP have required some sort of scored interaction in order for the lesson to properly report via SCORM to the LMS.
If you have a CP lesson without any scored interactions (no 'reporting'), that may be why completion is being recorded to the LMS.
SO try setting up one scored interaction as you suggest.
For CP lessons that do have quizzes, you won't need that separate scored interaction.
You'll also likely want to change you settings to just 'Slide Views Only' if you just want completion reported based on them viewing the whole project, and I suspect Slide View Completion should be 100, not 10...
Let us know how that goes...
Erik

Dism - The directory could not be completely unmounted - process explorer can't find open processes and unmounting fails

Hi all,
Installed WAIK on server 2008 R2 64 bit. I'm setting up some boot images, and am having a real hard time getting drivers to integrate into the driver store in the boot images.
What I'm finding is that when adding drivers to the boot image the gui hangs part way through over 50% of the time using Dell 760 or HP NX9420 drivers extracted to pull out the inf files. It's really flakey and will work after a couple of attempts and when the wind is right.
The main problem is that when the process fails the image is left open, so using dism to list mounted images and then umount the open images is the only way to try again.
However, some images won't unmount and the unmount process displays the following:
C:\Windows\system32>dism /get-mountedwiminfo
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Mounted images:
Mount Dir : C:\Users\davros\AppData\Local\Temp\~$WDSMGMT.000
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Mounted Read/Write : Yes
Status : Invalid
The operation completed successfully.
C:\Windows\system32>dism /unmount-wim /mountdir:C:\Users\davros\AppData\Local\Te
mp\~$WDSMGMT.000 /discard
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image File : \\DAVROS.stafflib.flinders.edu.au\REMINST\Boot\x86\Images\boot-(2).
wim
Image Index : 2
Unmounting image
[==========================100.0%==========================]
Error: 0xc1420117
The directory could not be completely unmounted. This is usually due to applica
tions that still have files opened within the mount directory. Close these file
s and unmount again to complete the unmount process.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Using process explorer shows no running processes that have the files open and the dism.log file shows:
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimimage.cpp:75 - CWimImage::Unmount(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:1068 - CWimManager::InternalOpUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:2318 - CWimManager::InternalCmdUnmount(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 Error executing command - CWimManager::InternalExecuteCmd(hr:0xc1420117)
2009-12-16 11:49:35, Error                 DISM   DISM WIM Provider: PID=5580 d:\w7rtm\base\ntsetup\opktools\dism\providers\wimprovider\dll\wimmanager.cpp:516 - CWimManager::ExecuteCmdLine(hr:0xc1420117)
2009-12-16 11:49:35, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
2009-12-16 11:49:35, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2009-12-16 11:49:35, Info                  DISM   DISM.EXE:
2009-12-16 11:49:35, Info                  DISM   DISM Image Session: PID=5580 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2009-12-16 11:49:35, Info                  DISM   DISM Provider Store: PID=5580 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
Rebooting the server clears the lock, but it's really becoming a joke, as I can create a boot image with the drivers, but then going back into add another driver causes the gui to not respond.
Any suggestions gratefully accepted. - Matt.

Hi all,
had same problem unmounting the wim file using Windows 7 Pro 32bit.
My solution was: Checking for "wrong" Dism.exe
Preparing a WinPE I followed the steps in the help of AIK. I ran the
copype.cmd batch. When it was finished, it said that it added something
to the path environment variable. It was clear that it did so in order
to find the tools needed for the further steps. As long as everything
worked, I didn't give it a second thought. Then I could not unmount the
WIM.
I looked at the PATH variable: NO entry pointed to the directory where
dism.exe was in. (In my case that would have been
     c:\program files\windows aik\tools\x86\servicing
Magically, dism.exe started from everywhere though.
Doing a      dir c:\dism.exe /s /a     showed I had a Dism.exe in
c:\windows\system32, as well. This one has a file size different from
the correct one. Obviously I had started this one (because PATH points
there).
Starting the correct dism.exe let me unmount the WIM without problems.
Regards,
Robert

Delivery 0080000276 is not relevant for transportation planning.

At the time of (delivery related) invoice creation, system throws a message "check the error log".
Log says:
" Error Log             0080000276 000010 Delivery 0080000276 is not relevant for transportation planning
            LongText
                Detail
                 Diagnosis
                     Copying control for billing requires that shipment costs
                     are copied from the shipment belonging to this delivery.
                     No shipment costs could be determined, because this
                     delivery is not relevant for transportation planning.
                 System Response
                     The system assumes that no shipment costs are to be billed
                     in this case.
            Technical data
                Tech. data details
                 Client                                 251
                 Group Number
                 Sales Document Number                  0080000276
                 Item Number of the SD Document         000010
                 Schedule Line Number                   0306
                 Counter in Control Tables              00
                 Message Identification                 VY
                 System Message Number                  306
                 Output Type                            I
                 Message Variable 01                    0080000276
                 Message Variable 02
                 Message Variable 03
                 Message Variable 04
                 Group Type                             F "
Please advice if anyone have any idea for this error log.

Error Log 0080000276 000010 Delivery 0080000276 is
not relevant for transportation planning
It is not necessary to assign the Transportation Planning to Delivery type. Only recently, I completed a similar configuration and running successfully for a client. The issue is because of your copy control VTFL. For more information, check note 713171.
thanks
G. Lakshmipathi

WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or are they NOT GOING TO?!

Hi everyone, I am trying to find out WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or if they are not going to do this at all.
I hope someone from Adobe Illustrator reads these forums and responds. There is an existing thread that has no official response from Adobe, and it has literally tens of thousands of views!? Please Adobe Illustrator, can you give people the official response they need so they can plan their workflow.
Apparently Affinity Designer is going to be adding a Rotate View Tool shortly and their app is only $50 one-off payment too, so perhaps you ought to respond before other people start making the switch? The rotate view tool is something illustrators really need, we already have it in Manga Studio, and it makes life so much easier. You can't really draw on a CINTIQ in vector form without it, at least not as well as you should be able to.
Can you please update your paying customers so we can make an informed decision.
Look forward to receiving a response.

Tell Apple
Apple - iTunes - Feedback

Backup Error - Operation could not be completed. (OSStatus error -54.)

Hi all,
I use the provided Backup software on my macbook (OS X 10.5.5).
I schedule some documents and email to backup each day. I use Microsoft Entourage for email.
This has all worked fine until the past couple of days (which I think is when I installed a Microsoft Office update).
When looking at the log, the error is:
Unable to copy /Users/xxxxxx/Documents/Microsoft User Data/Office 2008 Identities/Main Identity/Database: Operation could not be completed. (OSStatus error -54.).
I'm guessing this could be some kind of permissions problem - can anyone advise how to resolve it?
The database file is 350mb if that makes any difference.
Thanks and Regards,
Hal

I've had exactly the same message, (but with OSStatrus error -36) which is cutting short a backup (using Backup) of my home folder from my iBook G4 to the HD of my intel iMac both running Leopard.
It has happened three times after about an hour or so and I've never been able to complete a backup, which I desperately need to do before I run a complete erase and reinstall of my iBook.
Does anyone have suggestions of what's going wrong here?

TS3992 Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting iPhone backup could not be complete th

Hi, can someone help please - my iPhone hasn't been backed up since early August, now I can't seem to get it to back up to iCloud. I have 9GB of space, I have left it plugged in etc for 11hrs, but keep getting the same message " iPhone backup could not be completed" -what dies that mean.?

Hi,
I was facing issues with both backup and FB integration after the iOs 6 upgrade. Before then I did not have any issues with the iCloud backup service, but after a few days, I noticed that it was continually stuck at the Estimating time for the backup and it never progressed.
As any good techie would, I tackled the most pressing issue first . . . FB integration of course.
I had read in a separate post about this solution so tried it . . .
I deleted the original FB app and hard booted the phone. I then went into settings and entered the data for FB integration. Seconds later, I received a text message to my phone - already listed and verified in FB with a 6 digit code to re-enter instead of my password. Seconds later I was verified and then prompted to download the FB app. All backup and integrated.
Then I went into the iCloud backup, turned it off . . . and deleted the last backup. I then re-enabled backup . . . and although I thought I was going to face the same issue, after a few minutes, it moved on from Estimating time . . . to actually backing up. It is now a small way through the backup and seems to estimate that it will take another two hours to complete.
A good nights work. Backup and integration all sewed up. Good luck.
Cheers
Ian

IPod not going to sleep correctly

Hi there,
I am having an issue with my iPod 5G not going to sleep correctly. When I select the "Sleep" function on the menu screen the iPod with stop responding to the wheel, as per normal, BUT the screen only fades and does not blank itself completely. I can still see the menu items.
Is this right? I though the screen blanks completely, to save on battery power.
Advice and thoughts needed...cheers
iPod 30Gb 5G Windows XP

Hi, I have managed to change the battery of my Ipod
mini, but still after the Ipod is fully charged the
battery life still lasts only a few hours....
My assumption after reading all the technical
documents, is that even though the Ipod mini appears
to go to sleep (either by itself or after the play /
pause) button is pressed for a few seconds, that in
fact the Ipod isn't a sleep and the battery runs
down....
I have updated to the latest 1.4.1. software... only
recently happened, and replaced the battery (but
perhaps it didn't need it).
And it's 14 months old so out of warranty...
Does anyone know of issues with sleep mode not
working correctly? Is there a software fix for
this????
Cheers
I think I'm having the same problem - let me know if you find an answer and likewise I'll do the same. Is going to sleep the same as turning off? Mine doesn't even turn off when I press down the play/pause button!

Pages not loading completely or at all.

This is a problem I've been having for weeks and weeks. Pages in Safari (or in IE or in Firefox) will not load completely or at all. For example, the apple.com homepage does not load at all and neither does ebay. However, the amazon homepage will load almost completely, but a few of the images don't appear.
I've tried numerous ideas.
I've run through the power cycle. (Turning my router and cable modem off, and then restarting them.)
I've run network diagnotics.
I've reset Safari.
I've typed in IP addresses manually.
We bought a new router.
It even got down to me having to reinstall the operating system. (The computer is fairly new, so there wasn't any important information on it.)
I tried calling my ISP, but they don't know what's wrong.
Apple won't speak to me because my 90 days is up, and my parents won't pay $160 for the care plan.
I'm becoming desperate at this point. I love my new iMac, but there isn't much I can do without the web.
Oh, I also can't download updates, access the iTunes music store, or anything else that requires internet acces.
We have three windows computers in the house that are all running fine on the WLAN.
Any help would be GREATLY appreciated.

Any other ideas?
Hmm, can you try logging into another user account to see if the problem is present there as well? This will confirm where the root issue is - your user area or system wide. It sounds like it wil be system wide but best to double check.
If you don't have another account you can use System Preferences -> Accounts -> [+] to create a test one (and [-] to remove it if needed).
I've typed in IP addresses manually.
Can you expand on what you mean by that? Are you referring to the DNS addresses or typing the IP address in the browsers address entry box?

Pages not loading completely

I am seeing intermittent issues with web pages not loading completely, or taking a long time to load. Some times embedded images will not load. The page will often load, but the page loading icon in chrome will carry on spinning.
This is happening periodically and at various times of the day, but has been going on for a couple of weeks. The rest of the time, my broadband speeds are fine and very snappy, as normal.
I've restarted my router (homehub 3) several times.
This doesn't seem to be a general speed problem.
Using speedtest.net, i can see that my download speed is pretty consistent at just under 20mbps.
Using pingtest.net i see no packet loss, with good ping times.
Using the BT speedtest tool, my line speed to the house is around 23mbps, and my download speed is again around 20mbps.
This is effecting all devices attached to the router, both wired and wifi... both windows PC/laptops and ipad/iphone devices.
I am not sure where to look next, and am kind of dreading a conversation with BT helpdesk.
Any ideas?

Thanks... That's a long thread, and I am not going to pretend to understand all of it.
It seems to be similar issue, but I am seeing this any webiste, including this one, not just on a handful of specific sites.
If I understand the thread above correctly, that issue is with BT, and was apparantly fixed, although the most recent post suggests it has not been. And that if this is the same problem, I can't do anything to fix this myself, other than raise this BT?
Having played around a little more, I think I can see that this problem becomes more accute when i am jumping rapidly from one webpage to another in quick succession, until i get to the point where pages are just not loading anymore.

Accordion not going completely as planned

Similar Messages

Maybe you are looking for