Account assignment not possible (Asset not assigned to a business area)

HI
While posting an asset acquisition through F-90 by entering Business area, doc.type AA,TT-100,PK-70, i am getting the error messege AA483 - "Account assignment not possible (Asset not assigned to a business area)".
I have correctly created asset master and assigned Business area and Cost centre.
And i am not getting any problem in another company code for same asset class.
Please suggest
Bhanu Prakash

Hello
Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
Check the info on the link please
Reg
assign points if useful

Similar Messages

  • Account assignment not possible - item not yet calculated

    Dear SAP Gurus,
    While creating the Shipment Cost Document I am receiving following error.
    Account assignment not possible - item not yet calculated
    Message no. VY081
    When I double click on the Item to enter the conditions the screen goes blank at the item level. Kindly let me know if there is anything missing.
    Thanks and Rgards,
    Shehryar

    Hi,
    Please check below config.
    LETransportationShipment CostsShipment Cost DocumentShipment Cost Types and Item Categories.
    Hope it helps you
    Rgds,
    Kris.

  • ABNAN- Posting not possible (Asset does not manage postable areas)

    Hi Experts,
    I am trying to do a post capitalization creating a new asset  using transaction ABNAN with the transaction type 400.
    I get the Error " Posting not possible (Asset does not manage postable areas) "
    Can some one help me with this.
    Thanks in Advance
    Vijayanth

    Dear,
    Check Asset master if it has depreciaiton areas activated.
    Regards,
    Chintan Joshi.

  • Error: Not possible to post down payment clearing.There are no down payment

    Hi expert,
    I am running a settlement for an internal order and encounter the following error message.
    "Not possible to post down payment clearing. There are no down payments."
    Message no. AA571
    When checked on the vendor, the invoice has been cleared in the same month before the settlement. Under the Internal order line items, there is still an unsettled amount of the invoice.
    This internal order settles to an AUC asset. Previous month settlement was ok. Only problem with december.
    The downpayment acct is currently zero.
    Is there something wrong with the message table, or the posting of the vendor invoice ? Anything to do with the special GL indicator ?
    Kindly advise what is the cause and the method to resolved this asap.
    Thanks.
    Angel.

    Hi Angel ,
    My client also getting error message while doing settlement(T.C.KO88) even though Note.8600038 applied.
    Error Message:Not Possible to post down payment clearing .There are no down payments.
    Message: AA571
    If your issue is solved.
    please can you tell how did you solve this issue.
    Thanks,

  • Release orders against contract 4600000069 not possible (contract not relea

    Hai,
    I had created a contract and had a release procedure for it.
    I had released the contract using ME35k.
    When i try to raise a p.o agaist the contract i am getting the error as "Release orders against contract 4600000069 not possible (contract not released)"
    What could be the problem and solution for the above error message.
    Thanks
    Hari.

    Bijay Kumar Barik wrote:
    Hi,
    >
    > Error clearly says, contract not released. Release order can be created against contract ,if contract is released.Check=> you may used ME35K to release the contract , but after releasing with releases code, you have not saved the release .Just do use again ME35K to release the contract with release code & save.
    >
    > NOTE:
    > Also check how many levels of release is there for contract and check all levels of release with respective release codes is done or not before creating release order WRT contract.
    >
    > Regards,
    > Biju K
    I had released and saved for all the levels i.e for all the release codes.
    Still it is behaving the same.
    I have not used any ref purchase org as mentioned above in one of replies.

  • Admission Audit Run (Action is not possible; function not released yet)

    Hi All,
    I have created a Requirement Profile Template for admission audit and attached it with a program of study.
    But when I am trying to run the admission audit using Transaction PIQAUD_MP_CS, its giving a message that...
    Action is not possible; function not released yet....
    Please tell me what does this message indicate, please let me know if u need more information regarding it.
    Thanks in Advance
    Sudhir Gupta

    Dear Michael,
    Thanks for such a beautiful and elaborative answer. Please read my comments on the points you discussed :
    Create an admissions record: at this time a requirement profile is automatically generated for the program of study, as long as your program has been defined as 'Use Assessments'.
    Yes its generating a requirement profile automatically as soon as admission record is created.
    In the student file, go to the admissions tab and look for the icon that represents 'Audit Details'. (It looks like the icon for 'syntax check' in ABAP). Click on that.
    On Clicking 'Audit Details' icon it leads to another screen which contains all information like Admission application data but requirements section is blank.
    Now you are taken to a screen where you can see the admissions audit profile for the student. Execute the audit there, and you will see the list of checkboxes and results.
    The requirement screen is blank. No error message.
    Though i maintained the Requirement Profiles and RPT as per Cookbooks.
    I want to download the screen shots of Requirement Profiles and RPT. Please let me know how to upload screen shots in SDN.
    Warm Regards
    Vinod Kumar

  • Release orders against contract 4600000002 not possible (contract not relea

    hi all,
    Am trying to create a blanket po from a contract. but obviously, the release strategy i set up for po release has affected the contract created and hence gives the error above.
    how can i over come this challenge please?

    Dear,
    Please check contract release status in ME33K, header - Release strategy. Check all released contract or not. If not do relase with ME35K.
    Regards,
    Syed Hussain.

  • Not posted Treasury transactions- problem with new Business area (NewGL)

    Hi all,
    I have to change the Treasury account assignment objects due to a restructure. Currently, all TR transactions are assigned to one business area only.
    In future, there will be 3 (different) business areas.
    I have added new products, transaction tpyes etc and I have made further customising
    settings. It looks ok and I can enter new transactions, settle and post them.
    Problems I do have with already existing deals (fixed term and Forex transactions).
    In here I get posting errors with message:
    Balancing field "Business Area" in line item 001 not filled
    Message no. GLT2201
    I have added additional account assignment references for the new Business Areas
    and assigned to product types and account assignment
    What happens when I create a deal?
    Is that information (product type/ transaction/ account assignment) alreaedy stored in a table and used, when processing the deal further?
    Can I somehow change that original assignment per deal now?
    I think my problem lies in that the system wants to use the old assignment but also the new and it comes to conflict in field business area.
    Any hints much appreciated and will be reqarded as usual.
    Thanks
    Hein

    Assign Business area in the following step (ECC 6.0)
    SPRO - Financial Supply Chain Management - Treasury and Risk Management -  Transaction Manager - General Settings - Accounting - Link to Other Accounting Components - Allocate Additional Account Assignments to Account Assignment References
    Kalyan

  • Download Lightroom CC not possible: page not found

    Hi @all,
    I'm trying to download the german version of Lightroom CC but when on this page "Software für digitale Fotografie | Download Adobe Lightroom 6: kostenlos testen" I click on "Testversion" (https://creative.adobe.com/de/products/de/download/lightroom) and the following page is not loaded. Instead it says "page not found". Any ideas?
    Edit: Problem only occurs when using firefox (37.0.2). Download with the IE worked.

    In order to install Lightroom cc , you need to install it via Creative Cloud desktop app :
    If you are getting page not found error , try with below links ,.
    WINDOWS:
    Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
    MAC:
    Click on the below link and download Creative Cloud Installer file and use the same to install the Creative Cloud Desktop application.
    https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
    https://helpx.adobe.com/creative-cloud/help/install-apps.html

  • Business area in asset retirement

    Hi,
    While retiring the asset(t.code F-92), we get an error message
    "Account assignment not possible (Asset not assigned to a business area)".
    But in asset master(time dep tab), business area is assigned to the asset.
    The version is 5.0.
    What should be the problem. In FSV and PF BA is optional field.
    Can any one help me out in this. Please
    Thanks,
    Chandru

    Hello
    Assets are assigned to a single business area in their master record. Every posting to an asset balance sheet account is automatically posted to that business area. The business area for an asset is passed on to all line items connected with the asset. Therefore you do not need to make a manual account assignment for a business area at any point.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/5f/1fac7c4aee11d189740000e8322d00/frameset.htm
    Check the info on the link please
    Reg
    assign points if useful

  • Posting of retirement/transfer not possible (error in the asset) Mes: AA465

    Dear Experts,
    while doing ABUMN, i am getting the following error
    Posting of retirement/transfer not possible (error in the asset)
    Message no. AA465
    Diagnosis
    An  inconsistency was found for the asset 01  during the last recalculate values.
    System Response
    Posting is rejected.
    Procedure
    Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
    Regards,
    Venkat

    Thanks ravi,
    I run the AFAR but nothing is visible in test run.
    I am defined the cut off key(5%) and assigned in to the dep key.
    we run the depreciation for the last 5 months. some of the assets fully depreciated before lagacy data upload. in AW01N those assets showing the error message. Now that asset(fully depreciated asset) is transfer to another business area. then it showing that:
    Posting is rejected.
    Procedure
    Choose the function Recalculate values in the master data maintenance transaction, and remove any inconsistencies.
    Run the depreciation in AFAR means. in which period i can run.
    Thanks
    Venkat

  • Business Area is not getting updated in "Main Bank Account" Line item (FF_5

    Hi Gurus,
    I am executing T Code: FF_5 for uploading the "Multi-Cash" Format. This transaction clears the Bank Clearing Account and post the entry to the credit of "Bank Main Account".
    Now while i had executed F110, the Business area was properly captured in the Bank Clearing Account Line item. But while executing FF_5, the Business Area is not getting captured against the "Main Bank Account" Line item.
    Can you please tell me how to capture the Business Area against the "Main Bank Account" Line item.
    Rgds,
    Prasad.

    Hi,
    1. In case of Business where payments are made centrally it is important to report
        Bank A/c Business area wise.
    2. However I have solved the problem by doing "Sustitution", and its working fine. The Business Area is getting updated against the Main Bank Account Line item.
    3. I am however getting one error while doing the upload in FF_5. The error occurs
       only if Business Area is a "required" field in Bank Account's "Field Status
       Group".
       Error: (00 298) Formatting error in the field COBL-GSBER ; see next message.
       But if I make Business Area as an Optional Field I am not getting an error and
       also the posting is done to Main Bank Account.
    Is there anyother method by which this error can be corrected.
    I have assigned 2 points for your inputs. Can you help me to solve this error as well.
    Rgds
    Prasad

  • Posting not possible - AA439

    Dear all,
    Iu2019m having trouble to correct the values of a Proportional accumulated ordinary depreciation.
    The system returned the following message:
    AA439 - Posting not possible (Asset does not manage postable areas):Check the transaction type and the asset.
    I verified the postable area of the asset and is correct. The transaction type is also available for this movements.
    Please anyone can give me some tips?
    Where can I solve this problem?
    Regards,
    P.

    Hi
    I would like you to take into account the following information.
    This error is normally shown when the sum of
    Accumulated depreciation + ordinary dep. Py = 0
    You can only write up if a depreciation of previous fiscal
    years exists.
    The system checks internally if there is a depreciation area left
    where write ups can be posted, i.e. where the accumulated depreciation
    + ordinary dep. PY <> 0. If not, the system deletes the corresponding
    depreciation area from its internal tables giving you the error.
    Please check in this case note 50761.
    Best Regards,
    Blaz

  • Po release not possible

    [Re: po release is not posible].I have tried this link but didnt work anything.Plz Suggest.I tried deactivating exit .tried all release tables.but didnt work cl24n checked throght all end.

    Hi,
    For issue " PO release not possible  ", you have folowing causes and options are
    Option=>1:
    The PO you are trying to release is created before setting of Release strategy in the system, so you are getting message when you trying release PO.
    After setting release procedure for PO,now  to trigger release strategy for old  PO, you can go to change mode of PO(ME22N) and change quantity/pur. group/any changes in release value ,(change any release VALUE) & how PO triggering release strategy.
    Option=>2:
    After setting release procedure for PO, you may not getting "RELEASE  TAB" in PO header, so check the assignment of release class to PO release group.( you can use ONLY one release class for PO, you should not have more then one release class for PO and assigning to different release group)
    Option=>3:
    Check release strategy, some release vALUE, kept BLANK, so release strategy not triggering in PO.Can be cross check in CL20N/Cl24N for release strategy with release group and release class.
    Regards,
    Biju K

  • E not possible to post down payment clearing.

    Dear all sap guru's
    iam getting this meg:
    could you explaine me?
    document XXXX  E not possible to post down payment clearing. there are no downpayment.
    regs
    laks

    Hi Lakshmi,
    Give some clarity for your issue.
    Which t.code ur using
    and check it downpayment is in the open item or not.
    giv me the reply i will update you

Maybe you are looking for