Account Assignment Query

Hi,
I have a query regarding the changeability function of Account Assignment in the Purchasing documents in SRM. We have a requirement from the user as follows:
The Account Assignment is populated in the Shopping Cart. This Account Assignment gets automatically populated in the EBP PO. Now, here, when the PO is created, the buyer can change the Account Assignment. Is it the standard SRM way? Coz i think that there should be some message given when the Acct Assignment is changed from the one in the Shopping Cart. The requirement is that the buyer should not be able to change the Account Assignment or at least there should be a warning message when he changes it. Is this possible? If yes, how? I would also appreciate if someone can clarify the standard SRM functionality regarding the same.

Hi,
You can use the badi "BBP_DOC_CHECK_BADI" / "BBP_DOC_CHANGE_BADI" to put restrictions to the user while changing any value in the purchasing doc(PO in ur case).
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

Changing G/L account assignment causes reposting of receipt

Hi,
I had the requirement to change a G/L account to an new account as of this year. I delimited the symbolic account assignment and created a new record. Problem is, if I have to re-post an older trip, the old receipts repost to the new G/L account. We do not want retro-postings due to this change.
I changed table view V_T706K - Symbolic account assignment with a new begin date and new symbolic account assignment. Why does the Posting Run ignore the dates?

Hi Kenneth,
As per my understanding if the tripu2019s dates are between the change dates then this problem can occur.
As per the configuration done (which you can see in expert view), system fetches the data depends on three basis.
a.     As per trip first date
b.     As per trip last date
c.     As per receipt exact date
So in case if you create a trip of start date 15.01.2010 and end date 16.01.2010 and insert a receipt of 21.01.2010, it can fetch the config data of new GL account as per config.
I believe you have delimited the settings. Do let me know for any query.
Hope it helps you.
Thanks,
Vaibhav

Report as per Customer Account Assignment group or Material Account Assig

Hi,
I require report as per customer account assignment group or material account assignment group.
Can you please tell me how to fullfill this requiremetn.
I have go for ZReport or any standard report is available.
Regards,
ch.srinivas

Hi,
You could have gone for a query but unfortunately,you cannot use table TSTMT in a query so I think ZREPORT would be a better option.
Regards
Karan

How to use BAPI_ACC_DOCUMENT_POST for CO-PA Account Assignment

hi all,
when i used bapi to posting docment,but for document_type ='DR'(customer invoice), it is related with Profit. Segment.
it returned following message in return table:
E RW                   609 Error in document: ZBKPF ZY2005 DEVCLNT230
E F5                   808 Field Prof.Segmt is a required field for G/L account CN10 50600824
W KI                   166 Enter a true account assignment object with revenues
maybe due to i haven't fill parameter:CRITERIA and VALUEFIELD
but i have no idea about this.
would you please give some idea, sample code is great .
thanks.
helen

Hi, Qunli
If you haven't the documentation of the BAPI, you can search in here http://ifr.sap.com/catalog/query.asp
You can find the BAPI in SAP FI(470 or above). Under the 'Accounting Interface' hierarchy, you can find a 'AcctngBilling' BO, and the Post method of it is the BAPI you're calling. (you can search to demonstrate in Tcode BAPI). There is some explain for the interface, if it is not enough, I have some sample application which call this BAPI.
Hope it will be helpful.
Thanks a lot

Account Assignment in an automatic PO created from a goods receipt idoc

Hi guys,
I'm doing a goods receipt via the IDOC MBGMCR that is automatically creating a PO. Is there a way to make the item on that PO using the account assignement "K" (Cost Center) ?
In the BAPI for the goods movement, they are calling the function module "ME_CREATE_PO_ITEM" to create/prepare the item. In that called, they defaulted the account assignement to space!!! I don't know how I can overwrite it. Is it possible via configuration ??
Many thanks,
Stéphane

Hi Stephen,
Did you find an answer to your query, i have the same question i want to default the account assignment 'K' for each item for a particular stock transport order.
I'm wondering if it can be configured or do i need to have ABAP do it.
your reply is greatly appreciated,
Thanks,
Michelle

Details in "ACCOUNT ASSIGNMENT" tab in Shopping cart screen

Hi all,
We are on SRM 7.0.1.
For each requester,we have the EMPLOYEE role assigned.
In shopping cart screen,under account assignment,we want to see the acocunt assignment detailed view as the default view under tab "ACCOUNT ASSIGNMENT".Currently,under account assignment,user has to click on the DETAILS button and then the details show up in the bottom part of the screen.
Can anyone advise how do we change the default view for the "ACCOUNT ASSIGNMENT' tab?
Thanks.

Can someone answer my query?

SRM7.0 Multiple G/L account assignment for a product category

Hi All,
In SRM7.0 , it is possible to maintain multiple G/L accounts for a prodict category and account assignment combination. For example , for a product Category XX and account assignment CC , we can maintain more than one G/L account with one G/L as default. While creating the Shopping Cart , the G/L account is defaulted. However when we do F4 search on the G/L , then system is bringing all the G/L accounts from the backend through the search help from ECC. In that case what is the use of maintaining multiple G/L accounts in the SRM configuration? Is there any other config that is reqd? We thought system would restrict to those G/L account that are maintained in the config.
Thanks
Sukumar

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Account Determination and G/L Accounts Assignment Flow

Hello Guru's,
Can anyone help me in finding Account Determination and G/L Accounts Assignment Flow with T Codes. I am new to SAP SD and I want to maintain G/L accounts for my company. Thank you.
Regards,
Pranava

There are mainly links, sdn thread & message, sdn wiki & doc flowing around.
Only thing required from your side is to put afford to search them.
Thus, kindly put an afford to search for the topics search you want and if you find any problem in that then post your query on any of the respective forum.
For instance, follow the following links:
- [Account Determination|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=ERPLO&title=Account+Determination&decorator=printable]
- Re: Account Determination
- [Account Determination|http://wiki.sdn.sap.com/wiki/display/ERPLO/SD+FAQ#SDFAQ-2.AccountDetermination]
Hope you are aware of rules & regulation of SDN forums.
-Welcome and Rules of Engagement
-Read this before posting
Kindly corporate.
Regards
JP

Multiple account assignement for PO

Hi!
i've this problem about purchase data: to extract these data i'm using 2lis_02_itm and 2lis_02_Scl DS.
but i need in the same query the account assignement for PO (these data are in EKKN table).
in a first time i've enhanced the DS, but with Multiple account assignement i don't have correct data (because i've used select single in CMOD).
now i don't know how to enhance the DS with Multiple account assignement, could you help me ?
(a solution is doing an ODS with EKKN data and make an infoset with an other ODS with data from LIS extractor, but i prefer to enhance the DS)

Hi Alex
You are not able to enhance 2lis_02* datasources to give you the information wanted. The problem is that you need to split one line into multiple lines. I'm as well not sure that you'll get a good result from an infoset as youll get performance problems due to the needed join on document , line level and a possible outer join (not all documents will show up in EKKN). A better solution will be to source EKKN to a separate ODS, source 2lis_02* into separate ODSs and then create a new ODS sourcing data from the 2lis_02* ODS where you read the EKKN ODS in the start routine and uses that info to create extra rows if needed.
With Kind Regards
Kristian

Validations in srm for the account assignment category

here is the requirement.
After selecting the account assignment category i want to make some fields as mandatory like GL account. how can i do that.
thanks
kishore

Hi Kishore,
First of all let me tell you that I don't know the answer of this query. But I too had same problem in one of my previous project.
Frankly speaking, If we think over this issue from FiCo (specifically controlling) point of view- allowing users to choose G/L account would not enforce any hard control over G/L account selection which could cause terrible issues in reporting within Controlling. In order to exercise hard controls to ensure accurate reporting, I guess this selection of G/L account by user should be refrained.
Functionally, best possible solution would be to devide that particular product category into sub-categories (new prd categories) which would then have 1-1 relation with G/L accounts. Probably you can have a word with your Finance guy and let him know the consequences.
Please let me know your views.
Regards,
Amit

Multiple account assignment POs shows in IR screen lesser amount

Hi Experts,
I have one query regarding Multiple account assignment POs (ex :5 pos), my user trying to post the invoice doc in this lesser amount shown in invoice document (calculated the all 5 pos amount manaually around 10,000 INR but in invoice posting time it shows 9800 INR only). This is Frame work order po and GR is Non valuated.
Please help how we can handle this issue.
Regards
SAP MM

Hi Ramesh,
Thanks for your reply, it is distributed based on % basis, i seen in pos its 99.6% shows in some line items it shows 100.1% in another line items.
I observed in Tcode OMR6 tolerence limit for compamy code,in this the tolerance key "BR" and upper Tolerance limit 0.50% there is no lower limit.
The mentioned Tolerance key "BR"- Percentage OPUn variance (IR before GR)
I provided the workaround for this it is to manual change the price while doing the invoice and respective diffence in price of GR/IR will be posted at month end as per programme run for variant at each month end.
Please suggest me if any thing wrong ion this,how can i suggestt o my user.
please reply asap.
Regards
SAP MM

Open and Close Posting Periods According to G/L Account Assignment Objects

Hi,
Can anybody please explain me how configurations related to " Open and Close Posting Periods According to G/L Account Assignment Objects " works in SAP FICO? I am confused about this config.
Regards,
Mandeep

Hi Mandeep ,
First i would like to tell about fiscal year
fiscal year is nothing but a financial year of company in sap . it contain 12 normal periods and 4 special periods.In genaral we will call like month but that is sap that is a period. so 12 period for 12 months ok next special period will use in all companies for audit and tax adjustment purpose of previous year.
coming to the open and close periods.in sap for security purpose we have to open one period like this month july so i opened july period only we cant post the pervious month (june)and we cant post future month lik in (Auguest)ok
You can close and open periods by transaction ob52.
In transaction ob52 there are account types
+ Valid for all account types
A Assets
D Customers
K Vendors
M Materials
S G/L accounts
V Contract accounts
+ means all types. if you want to open vendor then enter period from and to according to your fiscal year.
you cant adjust items in closed period. if you want to then you have to open the period
For your information.....
posting periods also open user level tc S_ALR_87003642.
customization levael OB52.
Regards
Kumar

Error while creating a PO with Account assignment

HI MM Gurus
In our case, we need to create the STO for account assignment cat `Unknown`.
In SPRO I maintained combination of account assign cat and item cat.
Now, while creating a PO with Account assign U we get Error message - ME069 :Unknown account assignment not defined for use here.
Please advise how to resolve this issue.

Hi
When you are posting actuals, you need to give true account assignment object. With U (unknown), system cannot identify which account to be posted. Change account assignment in PO to another.
In standard SAP Unknown account assignment is not allowed in PO's. Only exception is Blanket PO.
Unknown is allowed only in PR and Blanket PO.
The reason is logically you are releasing the PO to the external vendor or Plant in this case you must know the account assignment.
Regards,
Ninad Kshirsagar

BAPI Error: No account assignment exists for service line 0000000000

I am using BAPI : BAPI_PO_CREATE1 to create a PO.
I am getting this error while creating PO "No account assignment exists for service line 0000000000"
Please help.

Yes...
for each item i am creating one parent service record and one child service record with REQUISITION_SERVICES.
the Package no for parent is the subpackage no for child.
also for each item, I fill REQUISITION_ACCOUNT_ASSIGNMENT and REQUISITION_SRV_ACCASS_VALUES
Still I get the Error.
Thanks to help me resolve.

Extension of input fileds in Sales order for account assignment

Dear Gurus,
Can anyone tell me how to extend input fields like Statistical order(COBL-AUFNR) and cost center(COBL-KOSTL) in sales order for accounting assignment and these fields have to be ready for manual entries. The order types are ZHGA and ZHV.
Which program has to be modified and how it can be modified?
Thanks a lot for help and advice.
Cheers,
Ricky
Edited by: Ricky.Martin on Apr 23, 2010 10:45 AM

Dear Rajendra,
There is a manual change for tax classification for material master in va02 initially it was blank now it is changed to ' 0 ' is any way influencing....?
Definitely material Tax classification will influence to determine the Tax code.
-->So Make sure that customer and material master having proper tax classification indicator.
-->Have you Update the price after changing the tax classification in the sales order.by going to item dat -->condition tab then click on Update push button bottom of the conditions screen.
-->Once again the check the condition record maintanence also for your MWST access sequence.
I hope this will help you,
Regards,
Murali.

Account Assignment Query

Similar Messages

Maybe you are looking for