Account clearing error

I run F.13 in test run, I selected some GL, but it display following error:
Account was selected, but not entered in table TF123, what should I do?

Hi Expert,
We run T-Code: F.13(Automatic Clearing), the configuration required to clear automatically in T-Code: OB74. It updates the
Table - TF123.
This will clear the GL Account with respect to the Chart of Accounts, Account Types and GL Account Intervals, this will clear with respect to the Assignment Field - ZUONR or Business Area Field - GSBER or Trading Partner Field - VBUND.
and then make a use of T-Code: F.13
Prerequisites: Create the GL Account with Sort Key - Assignment Number(Which GL Account want to Clear, it sorts with respect to Assignment Number at the time of Clearing)
Regards,
GK
SAP

Similar Messages

Vendor account clearing - Error message F5354

Hi All,
I am trying to do Vendor account clearing through transaction code F-44, when I am getting the error message Message no. F5354
"Account "1000001" in company code "1000" is marked as a reconciliation account for account type "K" and cannot therefore be directly posted to".
Account 1000001 is a reconciliation account defined in the vendor. The documents which I am trying to clear do not have any special GL indicators.
Please can anyone tell me why I am getting this message
Thanks in advance.
Edited by: mgokhale on Aug 17, 2010 8:20 AM

Hi,
Usually you have to give Adj. GL for automatic exchange rate clearing differences.
Please change the account in OBA1 transaction under account key KDF.
Here you have given reconciliation account for B/s account which can't possible for direct postings.
Please select recon account and double click, there you will find the account determination GL accounts.
Rgds
Murali. N

Message NA AU133 Account Clear rev sale to affil comp could not be found

I am trying to transfer assets from one company to another (Transaction ABT1N).
The above message tells me to "Enter this account in the account determination for Asset Accounting".
I cannot find this in the IMG. Can anyone advise please
Thanks

Hi, I have tried to assign a P&L acount to "account Clear revenue sale to affil. company" but the system gives me the following errors against existing field "clearing acct revenue from asset sale"! (which currently is a balance sheet account) and has worked successfully for years!
Error AC305 "Account xxxxx not allowed to be a balance sheet account" and Error AC306 "Account xxxxx not defined as a P&L account".
I have looked at other posts and it appear this is only a problem since 4.6. One post on the forum suggests a work around by changing the message status in OBA5 by setting WW against each message number. These settings already exist as Online "W" and Batchl "W".
Have you any ideas how I can get around this problem?

GL Account Clearing using T.code F-03

I am trying to clear the line items of a balance sheet gl account ( short term general liabilities) using t.code F-03.This gl account is specified as "open item Management" and line item display in the GL Master.
The problem is that when I try to clear the line items of the account, an error appears saying" Exchange rate difference accounts are incomplete for the account.
This means that foreign exchange valuation gain/loss accounts have not been assigned to this account.
My question is, why should exchange rate difference accounts be assigned inorder to clear the line items of a gl account?
Is there a setting which makes it mandatory for a gl account to be assigned exchange rate gain/loss accounts??
How do I solve this problem?
Edited by: aravind kamireddy on Sep 18, 2009 6:28 PM

Hi,
First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
You posted a debit of 100 USD @ 40 = Rs. 4000.00
You posted a Credit of 100 USD @ 42 = Rs. 4200.00
Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
Hope it is clear to you now..
Regards,
SAPFICO.

EBS Clearing Error - Citibank rounding amount in payment

Hi All
I am facing error in EBS Implementation using BAI2 file given by Citibank India.
Information about Vendor payment ( 497,414.61 INR in ZP document ) is sent to Citibank by a file. Citibank is rounding off amount and makes payment of 497,415.00 INR.
In BAI2 File sent by Citibank, hence amount is 497,415 INR. EBS while clearing gl account of ZP document, there is a difference in amount. And hence EBS program fails to post and clear.
Can you please suggest a solution ? Business is ready to post difference amount to a "Bank Service charge" gl account. Can we use "Tolerance Group" configuration to achieve this ?
-Regards
Kapil

Hi
We dig this further and found SAP DME Configuration had setting to round off amount. Hence F110 generated payments file caused rounding but not citibank.
I tried setting tolerance configuration but continue to receive "difference is too large for clearing error".
I am also considering option of updating DME Config so that payments file has 2 decimal places, but bank is asking that decimal point "." should be present as separator in amount. When I tried this, it caused issues in DME file.
-Regards
Kapil

Automatic clearing Error

Hi guys,
I have an issue where the user is running F.13.
He is giving a document number to clear and GR/IR clearing accounts in the select G/L account field.
The output generated is not selecting any items(vendors,customers or g/l accs).
The output says no clearing procedures are carried out in the error log.
The user says he wants to clear the GR/IR account and he is asking why he is not able to do that.
I am pretty new to F.13.
can anyone please explain.
thanks
srikanth.

Hi
Check the below mentioned all settings are done before you do F.13.
1) PREPARE AUTOMATIC CLEARING , PATH--Financial Accounting > General Ledger Accounting >Business Transaction >Open Item clearing >Prepare Automatic Clearing.
In this activity you enter the criteria for grouping an account's open items for automatic clearing. The clearing program clears the open items that are grouped together if their total balance equals zero in local and foreign currency.
You must enter the following standard criteria:
account type
account number or a number interval
2) Define Tolerance Group For G/L Posting.
3) Create Accounts For Clearing Differences.
( For G/L account clearing, tolerance groups define the limits within
which differences are accepted. In this activity you define the accounts
to which these differences should be posted.)
HOPE THIS WILL HELP YOU
REGARDS.

Invalid Account Code error when posting AP Credit Note

Dear Experts,
I hit this error message when posting an AP Credit Note based entirely on an existing AP Invoice (nothing was changed in the credit note).
Invalid Account Code [Message 173-9]
I have found 2 notes, but I dont think they're relevant
[Note 1311905|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001311905]
[Note 1286288|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0001286288]
Please help!
Warmest Regards,
Chinho

Dear All,
I found the solution!
In my AP Invoice, there was a Rounding amount, but when I copied over to AP Credit Note, the system unusually set the Rounding amount as $0.00 and copies the Rounding amount to the Discount field instead.
**The "Invalid Account Code" error happened because I did not set GL account determination for discounts scenario.
So what I did was I cleared the Discount field in the Credit Note, and enter the rounding figure into the Rounding field again. Then, the AP Credit Note was able to go in Successfully!
Thanks guys.
Warmest Regards,
Chinho

Accounts determination error is coming while create billing.

Hi Experts,
Accounts determination error is coming while create billing for Account Assignment Group A4 . In some cases only this error is appearing . I m a ABAPer I got this case and I m debugging the code . Can anyone suggest me what all the things i need to check to know the root cause . This error is coming very rarely but I want to find the reasons. I saw some of scn post bt it was not clear .
Please suggest briefly what w'd be the probable cause of this error and how to correct it.
Thanks in advance

Hi Dharmkrit,
In one of your earlier posts, you have mentioned that you have assigned G/L accounts by selecting table 1. This is probably where you might be going wrong.
Please follow the below steps to cross check your entries and you should hopefully have a solution.
(1) First of all, start from the account determination procedure and check which procedure is assigned to the billing type.
(2) Check the account determination type that is maintained in the procedure.
(3) Check which access sequence assigned in that condition type
(4) Check which table/tables have been maintained in the access sequence
* In most probability, you would have maintained a different table in the access sequence while you are trying to assign your G/L accounts to some other table
* Also, since you say that this error is only for a particular account determination type, check if you have maintained the correct combination of application/chart of account/Customer account assignment group/material account assignment group/G/L account in the correct table. However, this combination of fields depends on the table that you have used in the condition technique.
I suggest that you write your entries down while checking the flow. This will give you a clear picture if a connection is missing somewhere in the condition technique.
The customer/material account assignment groups are just keys (two digit codes) and their determination has nothing to do with Z1/Z2/A1 or any other code that you have defined in the system. The main determination is purely based on the condition technique and how correctly you have maintained the connections between the tables, access sequences, types and procedures. Just recheck these entries and you should be able to resolve the issue.
Hope this helps
Regards,
Sumita Mittra

Account determination error in FI doc during SD billing doc posting.

hi,
when I create one billing doc ref to s/o,
I check account determination in condition type:
G/L account no.: 110000
Provision acc. : 120000
in FI doc,
should debit 110000 and credit 120000
but current status is credit 110000 and debit 120000
Please help.
Thanks.

Hi,
One of the following could be the reasons for the Account determination error.
Please check.
1.Incorrect account assignment group entered in the customer and material master
Resolution:Maintain correct account assignment group in customer and material master,Eg.External Domestic,Z1 - External Foreign,Internal Foreign,etc,.
2.GL account not extended to the respective company code.
Resolution:Extend the required GL account to the company code.
Regards,
Sophia Xavier

Account determination error in Billing

Dear Expert,
I create one billing doc(1840000318) based on SO:1810000296. But in the posting status it is showing "Posting document not created(account determn error) in billing. I did not found any FI relavant docs for this billing in open item customer list.
*Anyone can advice me why the FI docs not created automatically..???
**Do you think there any missing configuration set?
***Or if I cancel the billing docs then it will okay or not ?
Thanks & b.Rgds
Bishnu

Hi Bishnu,
Check Points for Account Determination.
1. Ensure Cutomer master (Xd02)Sales Area Data- Billing Tab-- Acc Assign Grp ---Should be maintained
2. Material Master -
Sales Org-2----
Acc Assign Grp..Should be maintained.
3. In VKOA maintain
Application- V Chart of Accounts--Sales Org ---Acc Assgn Gp Of Cust -Acc Assgn Gp of Material-Acc Keys (ERL,ERS,ERF)----& G/L Account.
4. In ur Pricing Procedure i.e V/08... Maintain Reqt -2 corresponding to ERL,ERS,ERF. & Subtotal =9 in front of net total.
Revert for further clarification.
Regards
Amit Gupta

Account determination error in Invoice document posting

Problem - When generating the invoice document to customer, an error is displayed - Document is saved (Account determination error). As a consequence of this step, the invoicing is not able to create FI document
My Analysis-
Account determination is done in G/L account assignment (VKOA screen)
For my billing document, the system is not able to find the GL account (below are screenshots)
In VKOA screen, I already defined the GL account determination using KOFI procedure.
I initially defined in table 2 Cust.Grp/Account Key and it didnt work.
So I defined in both the tables 1 as well - Cust.Grp/MaterialGrp/AcctKey
But still system is not reading the tables and obtaining the GL account no
Any advice on why its not working?

Hi Nikhil,
As per the screen shots i could observe that you didn't maintained acct asst grp of customer.
check the acct asst grp of customer field in billing tab is maintained or not.
other possible reason may be in your pricing procedure -check whether the accounting keys are maintained or not.
This could solve your issue.

On Account Clearing Vendor/Customer

Dear fellows
We are to be implementing SAP ERP ECC 6 by u201CABACUS Consulting (Implementer)u201D here we enable the new GL functionality for segment reporting. We have a hot issue with on account clearing in both customer and vendor.
The scenario is that
When we clear on account customer through f-32 and vendor through f-44 the system generates extra line items those increase the debit and credit amount with their respective ledgers.
*Example*
Create customer invoice e.g 50,000 Rs. with profit center 10, segment 1000
Receipt on account payment from customer 50,000 Rs. with profit center 10, segment 1000
Clear the account with f.32 at that time clearing line items are generating.
Note:
According to our implementers u201CAbacusu201D this is the standard functionality of SAP and referred the SAP standard Note 69767 to prove their justifications.
The transaction is not relevant with given below difference clearing:
1.     Account Type
2.     open Item Account Number
3.     General Ledger Account
4.     GL Account Number
5.     Main Asset Number
6.     Company Code
7.     business Area
8.     business place
9.     Profit Center
10.     Partner Profit Center
11.     Credit Control Area
12.     Company ID
13.     Update Currency for General Ledger Transaction Figure
14.     Withholding Tax Code
15.     Certificate Number of the Withholding Tax Exemption
16.     Payee code
17.     Document Number for Earmarked Fund
18.     Earmarked Funds: Document Item
Regards,
Farhan FICO

hello srikanth
thanks for showing ur intrepid.
invoice entries (fb60)
Vendor(10013)               10,000
Exp(41709006)          10,000
payment entries (fbcj)
vendor(10013)          10,000
Cash (16620006)               10,000
clearing entries
Vendor(10013)          10,000
vendor(10013)               10,000
the clearing document increase the DR and Cr amounts.
here, i want to clear one thing, this is not the SAP standard functionality because i have test this scenario on my IDES system and it is not generating any extra line items.
SAP released the notes 69767 to justify the clearing line items and the system exactly work according to the notes, but in our case any of the given options (mentioned in Notes and my above post) be not matched causes to generate any extra line items.
Regards,
Farhan

How to configure Automatic Account Clearing for A/R

Hi,
Kindly advice me how to configure Automatic Account Clearing for A/R
The client requirement is
In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
Thanks in advance
Sunitha

Hi,
Use T code OB74.
Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
Then schedule the clearing program job F.13 in the background.
Cheers.

How can I remove an email account from my mail box list? I added the account as an iCloud IMAP account in error.

How do I remove an mailbox I recently added as an iCloud IMAP account in error? It should have been added as a POP account.

Highlight it in Mail > Preferences > Account and click on the "-" tab at the bottom of the list panel.

G/L Account blocked Error while posting goods delivery in VL02n transaction

Our Requirement is to change the G/L account which is proposed by OBYC(automatic account determination ) as per the movement typ and order reason from a Ztable. We need a place to code this logic before this OBYC check happens due to which we getting the account blocked error.
Please suggest some user exit or enhancemnet point where we can place this logic.

hi Ramki.,
I had configured a Surcharge on delivery in the condition type to be calculated on the qty delivered. Say for every Gallon, a surcharge of 0.2 cents is charged. I had maintained ths surcharge as a separate condition type and assigned it to a separate G/L a/c.
Now during PO creation, in the header , the price remains the same as i give for the Unit price.
IN the conditions tab in Item level, the surcharge is added on to the gross price and i get a Net Price.
Without saving the PO, when i go to see the Print-preview, i see only the Gross price.
After saving the PO, in print review, i see
1. Unit gross price under Sl.No.1
2. After the Item description, immediately, there is qty ordered x unit price + surcharge and them following Nett price
3. At the bottom right corner of the PO, i get qty ordered x unit price only . Surcharge amount does not appear.
How do i get the Total Nett price i.e qty ordered x unit price + surcharge to appear on the bottom right of the PO.
Is it a standard functionality for the Total price to appear or does it involve the role of ABAP programming.???
Do clarify my doubts
Tx
MahesH

Account clearing error

Similar Messages

Maybe you are looking for