Account Manager issues

I have a single phone account in which my daughter will be using now for her cell phone. I will remain as the account owner, but she will be paying the bills. I tried to add her online as an Account Manager, but I can only add her name...not a cell phone number nor an email address, There are no drop down menus or anything of that nature to add the information. Is there an issue with that aspect of the Services or could it possibly be my browser? I am using windows Internet 8.
Thanks,
Bob

Hi Cowboynm,
I understand your concerns regarding account managers information. When you add an account manager you can only designate a phone number that is part of your account; since you have only one line you can only select the one number on the account. Once you select the number you will be able to enter an email address. If you continue to experience difficulties adding your daughter as an account manager please follow me and send me a direct message with your full name and account information and I will reach out to you to assist you.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Similar Messages

Skype account manager issues

Just spent over an hour on chat with skype agent, finally was told OOOPS we are having a problem when a skype client tries to
a. remove a member from a managed account
Here is my problem, I have 2 skype numbers under 2 skype accounts NOT manager accts, I am trying to just combine my skype existance and there is no easy way to do this. This is a very frusterating situation, I only want to be able to manage all my skype numbers and accounts in one manager and way back somehwere years ago I created 2 manager accounts, how can I fix this, customer desk is no help

Hi Cowboynm,
I understand your concerns regarding account managers information. When you add an account manager you can only designate a phone number that is part of your account; since you have only one line you can only select the one number on the account. Once you select the number you will be able to enter an email address. If you continue to experience difficulties adding your daughter as an account manager please follow me and send me a direct message with your full name and account information and I will reach out to you to assist you.
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Goods Issue with Purchase Account Management

Hi,
in one of our foreign subsidiaries we have to run the MM-Purchase Account Management. These subsidiaries will be delivered by Cross-Company Replenishment deliveries with intercompany-invoicing. Every Goods receipt for such an replenishment delivery will be posted in the receiving subsidiary, besides the normal bookings on the u2018Goods/Invoice Received clearing accountu2019 and u2018Stock accountsu2019, on additional purchasing accounts. Now itu2019s possible that the goods have to be returned to the delivering plant due to any problems. To send back the goods we use again a SD-delivery (triggered also by an MM-IC-Purchase order) and with this SD-delivery we want also to post the goods issue in the subsidiary. But as the goods receipt has been posted on these special additional purchasing accounts, the goods issue has also to be posted on these special additional purchasing accounts (The target is to correct these purchasing accounts to the ammount of the returned goods). But it seems that this is not possible because of the MM-Account determination which doesnu2019t allow to post on these special purchasing accounts with an SD-transaction. Iu2019m no MM-expert but is there any possibility to post on this purchase accounts also when posting a goods issue in SD? If not in standard, are there any User-Exits in the account determination?
Regards
Stephan
Edited by: Stephan Nadler on Aug 12, 2008 1:20 PM

Hello Dinesh,
Batch valuation is similar to split valuation. Here is the link on how batch valuation works.
http://help.sap.com/saphelp_47x200/helpdata/en/25/283db54f7811d18a150000e816ae6e/content.htm
Please check in sandbox environment before using.
Hope this helps.
Regards
Arif Mansuri

Solution to an old issue with account manager?

Hello,
there is an old issue known for at least a year:
http://supportforums.blackberry.com/t5/BlackBerry-Bold/I-can-t-access-Email-Account-Management/td-p/...
But is there a solution?
I updated my BB Curve 3G system to 6.0 bundle 2534
now I cannot access my e-mail account menager.
Nothing works:
- downgrading
- restoring backup
- system reloading
I can set an account via BIS webpage but still my gmail account does not synchronise calendar and contacts...
Any help? Please?

http://btsc.webapps.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB26055
Solution found!

WORST CUSTOMER EXPERIENCE: $200 credit per iphone 5 trade in: Promised by GoWireless in Chino Hills & Verizon Account Manager, But Not Addressed in Over 4 Months

Hello everyone,
I just had the WORST CUSTOMER EXPERIENCE with a Verizon Wireless Premium Retailer (Go Wireless in Chino Hills) and a Verizon Account Manager.
Through a ridiculous saga of events, I finally had to send an email to a customer service supervisor with screenshots, outlined below to try to resolve.
Besides this, is there anything else I can to do address this situation?
I don't want any Verizon Wireless customer to EVER go through this.
Please see the detailed email below for reference.
Hi Laura,
I am also including GoWireless customer service on this email due to the incredibly TERRIBLE customer service I received from their employees.
As we discussed over the phone, I am contacting about the terrible, dishonest, and incompetent customer service I received regarding my upgrading of iPhone 6 through GoWireless Verizon Wireless Premium Retailer located at The Shoppes at Chino Hills, 13925 City Center Drive, Chino Hills. Their phone number is 909-465-5840.
I will send the screenshots of the text conversation I had with GoWireless salesperson (Will) over the course of almost 2 months, in an attempt to receive the $200 per iPhone trade in credits that he and GoWireless had promised me when I upgraded my phone to an iPhone 6.
As the text message screenshots will show (and a follow up emails, as this maximum has a maximum capacity issue), I was continually following up with Will over the course of 2 months regarding receiving the credits. Throughout the conversation, he kept indicating that he would address it. As the text messages will show, he never resolved it and I had to continually pursue getting the credits owed to m e.
After this, I contacted GoWireless corporate customer service and complained about the situation. GoWireless customer service indicated that they would help me resolve the situation. So they ended up contacting the store manager, Aaron.
Aaron then contacted me, after corporate customer service contacted him. Aaron assured me that he would address this and ensure I received the credits I was promised in the original transaction.
Aaron eventually punted me to a Verizon Account Manager during this past January. That account manager's number is 619-756-2100. I will attach the screenshots of the text messages I had with that individual for reference.
That Account Manager indicated that he would just apply the $200 per phone credit to my account since my family had to go through so much trouble and hassle over so many months.
After waiting for a month and not hearing from him, I reached out to him via text a few weeks ago. He did not respond and I sent 2 subsequent texts to follow up, and he never responded.
It was at this point I called Verizon customer service and complained about this issue, this past Saturday (2/21). As the voice recording for that conversation will show, the customer service rep indicated that she would try to apply the $200 per phone credit and that I should call back within 48 hours if I don't receive the credit on my account.
As I didn't see the credits applied today, I called customer service and spoke to you eventually about this situation.
While I appreciate your help in trying to resolve this, I would like to make a note of the following:
1. GoWireless sales representative WILL was INCOMPETENT and/or DISHONEST in applying my credits. As the text messages show, the ONLY reason my family purchased the phones were because of the $200 per phone credit.
2. GoWireless store manager AARON is INCOMPETENT and/or DISHONEST about this situation.
As you heard today on the call, Aaron tried to pass the blame onto me first, saying I didn't turn the phone in on time. This was despite the fact that I had been corresponding with Will over text and spoke specifically with Aaron the situation. They were the reason that I "didn't turn my phone in on time" Either Aaron "forgot" our conversation around this whole situation or was intentionally being deceitful.
Aaron then tried to pass the blame to the Verizon district manager, saying that it was something that that district manager to handle.
This situation indicates Aaron's inability to take responsibility (he tried to blame shift the issue) and be accountable for his actions. I am appalled that a large entity like GoWireless would employ such a person in a management position.
3. Verizon Wireless account manager (phone number 619-756-2100) is INCOMPETENT or DISHONEST about this situation. He indicated that he would help resolve this and he did not, and, in fact, has ignored my attempts to contact him over the past few weeks. I am shocked that such a person could be given responsibility to service customer accounts.
4. As we discussed, I'm am also going to put a formal complaint detailing out this situation on Verizon Wireless forums. I don't think any customer deserves to go through this type of experience. It is completely ASININE, ABSURD, and HORRIBLE that a customer has had to keep following up on this over the past 4 months. Even arranging a conference call today with Aaron and you!
The lack of professionalism and integrity of Will, Aaron, and the Verizon Account Manager is unbelievable!
5. Is there anyway that I can pull my account from GoWireless considering the situation. I don't think Aaron and his team are capable of honestly servicing any customers.
As I indicated, I will send a follow up email with the additional screenshots for your reference to show the set that I have.
I hope we can finally resolve this situation and my family FINALLY gets the $200 per phone credits promised to us in the original transaction.
Thank you.

Holy cow... That was a marathon as opposed to a sprint.... Since the iphone has such a good resale value, I agree - next time ebay.
i Am glad you finally got the cards. They should just credit the account.
As I see the same complaint on AT&T forum, the trade in programs are flawed, universally.

Lightroom 4.1 crashes every time I try to launch the email account manager

Running Lightroom 4.1 64bit edition on Windows 7 Ultimate. Ivy-Bridge 3770, 16Gb Ram, Crucial m4 SSD.
Crashes every time I do the following:
1) I right click on an image in the library or develop module and select "Email Photo"
2) In the From drop down list - select "Go to Email Account Manager". Microsoft Outlook is also listed (I think i played around with outlook in a previous on a previous install, probably lightroom 4 beta, but not the current one).
Lightroom imediately hangs.
Windows Crash Report:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.1.0.11
Application Timestamp: 4fb2266f
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.30319.415
Fault Module Timestamp: 4d26d15a
Exception Code: 40000015
Exception Offset: 0000000000075fe9
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 3f99
Additional Information 2: 3f99d01d55a59f0cf00ae3a1c9abd440
Additional Information 3: b4f4
Additional Information 4: b4f43863618d6c6fd5483b27fa17fcc5
I tried re-installing but it doesn't seem to fix the issue (it appears that there are some settings or something that are persisting). A completely clean install in a virtual box VM (windows 8) comes right up and gives me the option to select a new email account (sending pictures works fine). Any idea how to completely clear the email account settings so i can start over with setting this up. . ?

Hi Sean,
thanks for answering. No, it crashes anyway. I tried changing the identity plate color in all different modules. I was able to change it once when I had just bought a new computer and installed Lightroom, but now I can't. I wonder if there are any cache files or anything causing this. Unfortunately I don't know enough about this to fix it myself. I wondered whether LRB is causing a problem simply by having it installed, but as I said, after I removed it from the Web Galleries folder, the problem still occurred. Is there any way to recreate the identity plate in Photoshop (same font and size etc.) and reimport it into Lightroom? I need to finish my website and my name is sol light, it is barely legible. Any fix or workaround would be appreciated.

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

Window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"

Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!

Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support

Purchase account management- Imports

Hi,
Please help me in this.
Purchase account management is active. CIN is implemented. But MIGO is not happening for import procedure.
If purchase account management is deactivated, then MIGO is working for import procedure.
The client needs purchase account management also.
Thank you

Hi Aparna,
Have you have got any solutions to this...
I am also facing same issue. kindly help me if u solved the issue asked.
Regards,
Hemant

Account determination Issue in the GR posting

Hi SAP Experts,
I am facing below issue ,
I have created PO for Intercompany stock tarnsfer with PO type NB. While posting GR it is updating GL 650000. But for itercompany transfer we need posting to diffrent acc as 650001. for that i haved defined new acc determination process with Transaction event key as ZIC for Valuation class 3100. But when i do posting it still updating gl 650000, I need posting to GL 65000.
Client has activated Purchase Account Mangement process does it affects this posting, because GL to which currently system is posting is assigned to Transaction EIN(Purchase account ) from OBYC. If I deactivate Purchase account Management process then there are simple inventory postings to BSX and WR, but with this inventory posting i need posting to another account which is for intercomany purchase or revenue..This GL account is other than account for BSX and WRX.
Any resolution would be appriciated.
Thanks and Regards,
Rahul

Hi Ashok,
Thanks for quick response.
I did settings in the OBYC. But where i need to do settings you mentioned in the second para.
i.e. After Creating New GL account and Account key, You need to assign the same to Valuation class - GL account - Account key.
I assigned GL and Vlauation class to ZIC in the OBYC.But still getting same result during posting.

Why can't I choose Apple Mail from Lightroom 4 Email Account Manager

I know that the built-in emailer in Lightroom is pretty half-baked but I'm having trouble even getting limited functionality out of it. While many people report you can send an email and leave the "From:" menu blank and that will take you to Apple Mail if you select it from the Email Account Manager. But I never get that option. All of my options are webmail: Gmail, Hotmail, AOL, Other... No matter what I do Apple Mail is never an option. Truth be told, what I'd really like is to find a way to automatically attach the image to a Gmail webmail session in Safari or Chrome so I could have use of my address book but that seems like a pipe dream. I'll settle for Apple Mail. Can anyone help?
Secondly, one of the other problems I have with the built in emailer is that Groups in the address book don't work at all for me. I've taken the time to input a bunch of addresses and then add them to a group. But I can find no conceivable way to automatically put that group in the To: field. It never comes up on autofill, can't drag it, nothing. I just have to manually type the addresses.
Something must be wrong. But what???
Thanks.

Apple Mail only appears if it's your default email client on the computer. For example, I have my default set to Postbox so Apple Mail never appears. It would appear in this pop-up:
If you do want to get through to a webmail session, you might be interested in this instead: http://www.photographers-toolbox.com/products/lrgmail.php
I can reproduce the issue with the groups and I'll get that bugged, thanks. (There should be a checkmark in that Address Book dialog to allow you to check the whole group.

Pre order? account manager?

I'm trying to pre order the iphone 6 PLUS but it says I must be an account manager. Only my dad and I have Verizon accounts and neither of us are the account manager. I put in our billing zip code and last 4 digits of social security hoping that would be the billing account password but it was not. We do not know the billing account password so how can I please change to account manager in order to pre order the Iphone 6 PLUS?

brittxo,
Oh no, sorry to hear you are experiencing service issues when you try to place your order. In order to place an order you would need to have an account setup as the account owner, if neither numbers are setup this way, please contact customer service to ensure you have full access of the account.
KarenC_VZW
Follow us on Twitter @VZWSupport

Can't add account manager

I've recently returned to Verizon after a disastrous and short lived relationship with Sprint. My wife and I had to terminate our contract with them because of several issues and because she was the one that cracked first, she was the one that got to call and scream at them. Since I was the account owner and she was halfway across the state at the time there was a great deal of confusion over trying to get her access to the account so she could even discuss the problems we were having, let alone try to make changes to the account (which ended in our leaving their service). I am again the account owner for Verizon and I was quite thrilled to see that I could designate account managers on My Verizon, which would prevent such difficulties in the future. A couple days after getting the account started went to do just that online.
I changed the billing password with no problems, but when I try to complete the process of designating her as a manager I get an error message saying that I cannot do that online and I should call customer service. Not 'You cannot do that online at this time' or 'That service is currently unavailable online' but a straight up 'You just cannot do that online.' I get as far as putting in her name, number, and address, and when I hit continue - error message. I've tried three times in the last two days, with the same result each time. Sure, I could call customer service or go to a store, but isn't enabling it as a function within My Verizon supposed to make it easier? I've even gotten a welcome email promoting it as one of the things I should do to set up my new account, along with things like setting up alerts for data usage and paperless billing.
I don't like calling customer service for cell service providers because I have never had a good experience with any company in doing so, and going to the Verizon store is always at least an hour visit while I wait for the two people ahead of me to finish their business. I love the convenience of managing my account online, but if you're going to promote that I do so, maybe you should actually make it so I can, rather than have me chase my tail trying.

That's great that you need to be with Verizon for 30 days before it becomes available. I have been with Verizon for several years. I am trying to setup account managers in my Verizon, I have a request pending from an account member to the account owner to become an account manager. Every time I, as the account owner, click accept on the request, I get the same error message. "Assign Account Managers
This option is temporarily unavailable in My Verizon. Please contact Customer Service at (800) 922-0204 if you'd like to add, change or remove Account Managers.
We apologize for the inconvenience."
This same error message has been showing for months. The last rep I spoke with de registered all of my my Verizon login accounts so that they can be re registered. How do I get my lines setup as an account manager?

WARNING: Canon Pro Printers and CS4 – Serious Colour Management Issue

Over the last four days (and over fifty prints) I have undertaken extensive and meticulous tests to identify the cause of a problem; namely that targets for profiling a new printer (a Canon Pro9000), printed with ‘no colour management’, were printing far too dark and with what appeared to be a colour cast.
I have conclusively eliminated the printer, the printer drivers, the Mac OS, corrupted preference files, corrupted user accounts, incorrect Photoshop settings, incorrect printer driver settings, the ‘sticky settings' issue, and user error as possible causes of the problem.
I can say with 95% certainty that my tests, conducted using Mac OSX 10.4.11, have proved the following:
That, printing to a Canon Pro9000 or iP4500, Photoshop CS4 does not print accurate targets suitable for producing profiles. This applies to both the No Colour Management (NCM) and the Printer Manages Colour (PMC) settings.
Photoshop CS and CS2 are not effected.
I did not test CS3.
Furthermore, colour managed prints (using the same accurate profile made in CS2), printed in CS2 and CS4, show subtle differences. This may not be an issue except in the most critical applications.
It is likely that the problem will not be confined to the two Canon printers above since many other Canon printers share the same driver architecture.
Reading posts and discussions on other websites would seem to indicate that this problem is also manifest with some Epson printers and may also effect Mac OSX 10.5.
I have to conclude, therefore, that Photoshop CS4 cannot be replied upon to print targets of sufficient accuracy to produce reliable profiles for a colour managed workflow.
The fact that this is only just being reported can be attributed to four factors:
That many CS4 users are continuing to use profiles made under older versions of Photoshop and have yet to make new profiles using CS4.
Some users may not immediately notice a problem, or may ascribe it to other causes.
Some users may take the line of least resistance and use a previous version of Photoshop to work around the problem.
Some users are still using the older versions of Photoshop not effected.
Eric Chan (of Adobe) has stated on another website that CS4 implemented some new APIs for printing and that this has given rise to some "minor glitches". If Eric Chan is correct, and Adobe changed the APIs in Photoshop CS4, this begs question of whether Adobe sufficiently tested CS4 before release ? If Adobe did not test their software, and therefore failed to identify this critical problem, this would suggest negligence on Adobe’s part. If Adobe identified the problem but then did not inform users that a potentially serious colour management issue existed this would suggest wilful or gross negligence.
It is not good enough to say that Adobe simply followed the ‘conventional’ path and ‘followed the rules’ regarding API implementation. The experience of end users does not correspond to a “minor glitch” and, in my case, has been extremely costly in terms of time (over five days in all), lost revenues, and materials. Furthermore, why should Adobe's customers be forced to use their valuable time diagnosing problems clearly of Adobe's creation – and actually admitted.
In UK law providers of goods and services (and this includes software) have to supply them as “fit for purpose”. Clearly, in terms of colour management, CS4 is not fit for purpose. Neither can Adobe hide behind its labyrinthine licensing terms since any exclusions would be ruled unlawful under the UK’s ‘Unfair Contract Terms’ Act.
My strong and unequivocal recommendation is that representatives from Adobe, Apple, and the printer manufacturers meet together – with the utmost urgency – and provide a rapid and complete solution. It is simply not good enough to pass this ‘over the wall’ saying “it’s not our problem”. It is. Adobe's, Apple's, and the printer manufacturers'. Please solve it. And quickly.
Identify the problem clearly, make it and the solution/s public; and publicise it widely and thoroughly.

Dear DYP.
Thank you for your concern.
"What fixes have you tried?"
If I may quote from my post above:
"I have conclusively eliminated the printer, the printer drivers, the Mac OS, corrupted preference files, corrupted user accounts, incorrect Photoshop settings, incorrect printer driver settings, the ‘sticky settings' issue, and user error as possible causes of the problem.
I can say with 95% certainty that my tests, conducted using Mac OSX 10.4.11, have proved the following:
That, printing to a Canon Pro9000 or iP4500, Photoshop CS4 does not print accurate targets suitable for producing profiles. This applies to both the No Colour Management (NCM) and the Printer Manages Colour (PMC) settings.
Photoshop CS and CS2 are not effected.
I did not test CS3"
These tests took place over three weeks and involved over five days of work and the replacement of the printer on Canon's recommendation (although the printer is clearly not at fault).
Please note that I am using Mac OSX 10.4.11.
"What driver versions are you using?"
Pixma iP4500 6.9.3 (also 6.9.1, 6.9.2 and the driver supplied on the CD).
Pro 9000 4.8.7 (also 4.7.3, 4.8.4 and the driver supplied on the CD).
"Yes it is frustrating but in a lot of cases it is fixable as I and others have clear reported, on this and the LR forums."
I have not found any fix on any website referring to Canon printers, despite exhaustive searches (this includes Canon's European and US websites which are mute on the issue).
The ReadMe file supplied with the installation disc of CS4 refers to problems with "some Canon printers" when printing with the 'Printer Manages Color' but does not identify using 'No Color Management' nor Epson printers as having issues.
I hope this post answers your questions.
Clearly all users of CS4 need to be warned of this problem which is likely to effect other printers. I believe that I am assisting others by issuing this warning. It is done, not to cause mischief, but in the spirit of a public service. CS4 users can then treat their printing results from CS4 with caution, and then conduct their own tests. I have presented a workaround which is to use a prior version of CS4.

Issuance Securities Account for issue of bonds?

Hi
Should I have a PAS Issuance Securities Account (created in transaction TRS_SEC_ACC) when I want to issue/sell Zero Bonds (04J) or should I use a AKT Asset Securities Account? we want to raise say 95.000 and pay back 100.000 after 1 year.

Hi,
yes, Liability type security accounts (PAS) are used to manage issued bonds in the system (see http://help.sap.com/erp2005_ehp_06/helpdata/EN/d2/6f84c8415e11d182b10000e829fbfe/frameset.htm or http://help.sap.com/erp2005_ehp_06/helpdata/EN/96/3d9b422f1a0631e10000000a1550b0/frameset.htm).
hope this will help you.
BR
Renatas

Account Manager issues

Similar Messages

Maybe you are looking for