Accounting Entry not released at MIGO

Hi Gurus,
I'm facing the below error at MIGO, so accounting entry not released..
" Field Order is a required  field for GL Account XXXXXX"
Pls suggest me.
Regards,
Yatheendra

Go to that GL account
Check the field status group. the field status group assigned now expects a mandatory in field internal order
to avoid this change it to a field status group where in internal order is not required.
to see the field settings:
a. go to FS00
b. give gl account and coycode
c. go to tab create bank/interest
d. double click on the field status group
e. choose additional account assignments from the list of field categories
f. nw check the field internal order
hope it helps
Regards
anantha

Similar Messages

  • While "Invoice Cancelling- Accounting entry not effected in Trial balance"

    Dear All,
    Any one knows this please revert back.this Issue is very urgent (We have to Close the Periods)
    Issue: While "Invoice Cancelling- Accounting entry not effected in Trial balance"
    Invoice which is cancelled and accounting events for Invoice & Cancellation is taken place, but the entry for cancellation is not appearing in the GL Hence the reversal effect of expense is not seen.
    I can able to see the Reversal Entry in Payables > Reports > View Accounting A
    Here > Tools > View Accounting Events > View Journal Entries > Show Addtional Information > Transfer to GL Status is "No" after that i have Run the Transfer Journal Entries to GL even its not appearing in GL and not transfer to GL.
    @Have to Resolve this as soon as possilble, plz any one can lets guide me
    Reagrds,
    senthil

    Plz Update this asap.....

  • Account entries at tie of migo and miro

    Dear Gurus,
    please let me know about the account entries at time of MIGO and MIRO.
    thanking you in advance
    Best regards,
    Raghu
    Edited by: Csaba Szommer on May 22, 2011 3:20 PM

    Dear,
    During MIGO Goods receipt,
    Inventory stores a/c - Debit entry of value 'x'
    GR/IR clearing a/c - Credit entry of value 'x'
    For MIRO,
    Vendor a/c - Credit entry of total invoice value
    GR/IR clearing a/c - Debit entry of value 'x' & Few other entries
    Regards,
    Syed Hussain.

  • Accounting entry not posted but MBEW table shows total stock and value

    Hi
    My R/3 version 4.7
    I have a material which is stockable and valuated of material type ERSA(Spare parts)
    This material was created in may 2007 and material ledger activated,i dont see master records in accounting view  in material price analysis tab for the month may 07 till aug 07,and i see master recordsfor the month sep 07 till jan 08
    For this particular material in the report MB51 for all the 3 material documents posted,there are no accounting entries in accounting document.
    Also in the report output the field amount in local currency is zero for all the 3 material documents.
    1.1st material document with mvt 202 for qty 1 posted in the month of may 07,no entries in acc.doc
    In this case,MSEG-DMBTR(amount in local currency) was not updated
    Also i dont see master records for this period in accounting view in material price analysis tab,in material master.
    2.2nd material document with mvt 261 posted for qty 1 in the month of nov,no entries in acc.doc
    In this case,MSEG-DMBTR(amount in local currency)was not updated.
    I see master records for this period in accounting view in material price analysis tab with stock 1 qty and value zero
    3.3rd material document with mvt 101 posted qty 1 in the month of dec,in this case once GR is done MSEG-DMBTR(amount in local currency) was not updated,but mbew has the entries for stock and value.  
    Can any one let me know why the system is not updating the mseg-dmbtr and as well affecting MB51 report
    Regards
    Ratha

    The settings in Customizing which define that no negative stocks are allowed for the storage type, have only an effect on the transfer orders. In addition, you must also set message L9040 as an error message. For this, call up the Customizing and branch to: 'Logistics Execution -> Warehouse Management -> Interfaces -> Inventory Management -> Allow negative Stocks in Interim Storage Types'. There, execute point 'Control of System Messages in Warehouse Management' and enter message type 'E' for message number L9040

  • Accounting entries not generating during return deliver PGR

    Please any body can help me i am creating a return delivery when doing PGR it should be created the material document as well as accounting document. But the problem is it is only creating material documents i.e. only quantity is updating but accounting entry is not generating. Even i have tried in OMS2 by quantity and value update.
    Please help me give me the solution.
    Regards.
    Lalxmikanta Das
    <b><REMOVED BY MODERATOR></b>

    Hi Das,
    Accounting documents are created when billing documents are generated. Accounting documents are never ever generated when a returns delivery document is created.
    If u have created billing document for normal sales process and if, an accounting document is generated, One more accounting document is going to be generated when u Cancel the billing document.
    In ur case....If U have created a returns delivery document, create credit memo w.r.t returns delivery document. Then an accounting document is generated if ur account determination is configured in ur system.
    Regards,
    Praveen.

  • Accounting documents not released

    Hi Guru's
    When saving the billing document the accouting documents were not released ,wat may b the probable reason.I have checked the sd configuration,It was ok .Pls let me know wat may be the missed link .
    Thanks in advance
    rgds

    To resolve the error, you can analyze account determination in the billing document. Process:
    Goto T.Code: VF02 & Enter Invoice number
    Next (On the top most strip) goto Environment
    Next (Select Environment) go to Account determination
    Next (In Account Determination) select Revenue Account Determination (first option)
    This will list all the condition types in the Billing document & analyze each condition & check for which G/L accounts is not determined.
    Possible errors:
    1. VKOA not maintained for required combination
    Solution: Maintain the combination in VKOA.
    2. Account Assignment of Customer / material not maintained in Customer / Material Master (If maintained in combination in VKOA).
    Solution:
    Option 1 (Standard solution):
    step 1: Cancel Billing Document --> Reverse PGI --> cancel Delivery --> Cancel Sales Order
    step 2: Maintain Customer master / Material Master correctly.
    step 3: Recreate sales Order --> Delivery --> PGI --> Invoicing.
    Option 2:
    Force the Account Assignment Group of Customer / Material through Debug in change mode of Billing document, which will release Billing Document to Accounting.
    3. Account Key not maintained in Pricing Procedure:
    Impact: This may create accounting document, but if condition type, which are to be posted to account, but do not have account key maintained in pricing procedure, it will not be post the relevant condition type to G/L account.
    From FI Side, you require to check that all the G/L account has been maintained through T.Code: FS00. G/L account being Master data has to be created in each client ot uploaded through LSMW / SCATT / BDC.
    In Billing Document in change mode (in the first screen where we enter Billing Document number), on the top most left hand corner, take a dropdown on Billing Document & select Release to accounting. Here you can get the under mentioned possible message:
    1. G/L account not found
    2. Cost Element not maintained for G/L account.
    In both the above cases, FI consultant requires to take corrective action.
    Regards,
    Rajesh Banka
    Reward suitable points.
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).

  • AR Deposit Unpost Accounting entries not getting created.

    Hi,
    We are working on FSCM 8.4, PT 8.42. Due to some Issue in AR UPDATE , The InterUnit Accounting entries didn't got created for AR Payment. Hence we Unposted the Payment. The Payment got Unposted but there were no Accounting entries created for the Unpost.
    What can be the possible reason for this?
    Can anybody explain me how an accounting entries are created for payments, When we press the Create/Review Accounting Entry Button ?
    Regards,
    Satish
    8010019437

    Few more notes, the user created a CM today without issue and in reviewing the WF attributes have the same field:
    Invalid Rule Value:  "*** NOTE: THE RULE ENTERED IS NOT VALID, PLEASE ENTER IT AGAIN."
    But CM got created successfully.  Looks like code is doing a loop with the same generic message and main error log field is the "Credit Memo Creation Error:"

  • Account determination not possible in MIGO

    Hi Gurus,
    While posting GR i am getting this error msg as "account determination for entry not possible"
    Pls if any have worked on it give the solution asap
    It will be highly appreciable
    Thanks
    Usha

    Hi,
    You have to click on the message, it will then give you full details.
    What it will tell you is that for the combination of the following fields does not have a GL assigned to it in the auto account determination config
    Chart of accounts
    Transaction event key
    Valuation area group
    Account modifier
    Valuation class
    (some might be blank, the error message will show you the entry it is looking for)
    Just make a note of the data for each of the above that it is trying to use.
    At the bottom of the error message is a proceed button.
    Click on this and (if you have authorisation) you will be taken to the config directly.
    Just use the above data to go to the correct transaction event key and make sure that you add an entry for the right valuation area, account modifier and valuation class with the correct GL to be used.
    Steve B

  • VAT accounting entry not created from Bill

    Hello,
    We are creating Bills but when we want to create the accounting entries there is no VAT line created although there was VAT on the Bill. Hence, the journal is unbalanced
    Any ideas how this is possible?
    I have an account assigned to my VAT Code...
    regards,
    Stijn

    Dear Mr. Bernhard
    In the Real depreciation Area ie Area 01 (Posting happens realtime), under "Value Maintenance" ---> Revaluation -
    > * All Values are allowed
    under "Entries for Derived Depreciation Area" , Depreciation sign field is blank
    regards
    Parag Bhargava

  • Import PO - MIGO accounting entries not coming as required .

    Dear Team ,
    During Import PO , i have completed MIRO for planned delivery costs .. i have then gone to complete MIGO
    while doing this MIGO , i find that Material - Dr and GR/IR clearing - Cr which is correct
    but the problem is the planned delivery costs for which i earlier created MIRO is also added into the material value and each of them has to get displayed separately at the time of MIGO ( as each is assigned to separate accounts ) ... but right now all these planned delivery costs are getting added to the material value and is shown as 1 figure in GR/IR clearing account .
    what settings are to made so that the planned delivery costs included in the GR/IR clearing to be shown separately ?
    example :
    __existing :__
    after MIGO ,
    Material - 50000 ngn ( Dr)
    GR/IR clearing - 50000 ngn ( Cr)
    *expected :*
    after MIGO ,
    Material - 50000 ngn ( Dr )
    GR/IR clearing - 40,000 ngn
    GIT Duty - 5,000 ngn
    GIT Insurance - 5,000 ngn
    Please suggest ..
    Thanks ,
    Mike

    HI
    check following points for your condition in M/06
    Condition class =A
    Calculate. Type=A
    Condition Category=B ( Delivery cost)
    Accurals
    and check in M/08
    Statistical
    Assign Accurals and account key
    IN po check you are assigen vendor to that condition ,click on details  of condition in po and assign vendor
    Regards
    Kailas Ugale

  • Accounting Document not released

    Hi gurus,
    i created a Credit Memo, for a sales order, and accounting document is not cleared, can some body please guide me how i can check and release?
    here is the Order Sttus looks like,
    . Credit Memo Request 62987215 / 10         06/26/07                 Completed
    Credit Memo 203126485 / 10                      06/26/07                 Completed          
    . <b>Accounting document 204176485             06/26/07                  Not cleared</b>
    Thanks a lot...

    Hi,
    If the status is not cleared, there is nothing wrong. It means Customer has not made payment. Once the payment is received it will be cleared. In your case, as it is a Credit Memo, either a payment has to be made to Customer or it has to be adjusted against an invoice. Once that is done it will be cleared.
    Check whether the Credit Memo is created with reference to the Original invoice?
    Thanks
    Murali.

  • Accounting documents not generated in MIGO for Acct. ***.Category "A"

    Hi Friends,
    I have created a PO for Asset procurement. I have selected acct. ***. category as "A" in the PO. When I do the GR, the material document is getting generated but without any accounting document. Accounting docs are getting generated for other acct. ***. categories like for "F" and "K", but not in the case of "A".
    Please suggest where in the configuration should I check for this issue.
    Thanks & Regards
    Satya

    Dear Satya,
    Goto OME9, select your related AAC "A", then when you are maintaining PO with such AAC, the GR-non-valuated indicator will be set defaulted and greyed out (i.e. you can't be able to deactivate). If only GR-non-valuated indicator is set, then this indicator check box will be defaulted (but not greyed out) and therefore, you can change if you wish to. Yet, these settings are not relevant to the case of raising multi account assigned PO as in this particular case, SAP will automatically set the GR-non-valuated indicator check box regardless of if you have made any settings in OME9. Hope this could help you. TQ
    rgds,
    nanthakumar

  • Accounting entries for AP DPI

    Dear experts,
    When we have to pay advance to vendors, accounting entries not generated correctly.
    When we made AP-Down Payment Invoice, It generate following JE:
    1.
    Vendor - Cr
    Resp G/L - Dr
    When we made outgoing payment based on DPI, following entries generated:
    2.
    Vendor - Dr
    Bank A/c - Cr
    The net effect in vendor a/c is nil. This is wrong as per accouting practice.
    Vendor shoud be debited in this case. How do we know total advance paid to vendors?
    We have to adjust downpayments in final invoice of vendor.
    I think, this is general practice. How to do it in SBO 8.8 PL-09.
    Regds,
    OM

    Dear Mr. Om,
    The accounting entry is correct. Are you following some different practices?
    Your RESP A/C will tell you the total Advance to vendors.
    When you will create Invoice for this Vendor with DPI with Outgoing payment following entry will take place.
    Vendor  CR.  0 amount
    RESP     Cr.  X amt.
    Inventor Dr.  x Amt.
    Regards
    Ashutosh T

  • After Canceled Excise Invoice, GL entry not revers

    Hi Expert,
    Reverse accounting entry not generated for canceled excise invoiceRegards
    BK GAIKWAD
    M9881908615

    Sir,
    my problem is when we have canceled the Excise Invoice Payble duty GL not revers.
    Regards
    BK GAIKWAD

  • FI/accounting document tab not working in migo or mb03

    Dear Experts,
    In our test server the accounting entries are not showing when we are trying to check those through MIGO(display) or mb03 by clicking FI document tab.
    Although all are valuated entries, what could be the reason, message is coming "No subsequent document found in Accounting"
    Message no. RW011
    Diagnosis
    All documents generated in Financial Accounting for object type 'MKPF',
    reference document number '5000341600' and organizational unit '2010' should be displayed.
    System Response
    No accompanying documents were found in Financial Accounting
    through mb03 it is showing
    Material document 5000341600 does not include an accounting document
    Message no. M7082
    Diagnosis
    The system cannot find an accounting document for the material document 5000341600.
    Possible reasons for this are:
    The goods movement has no relevance to accounting. Therefore, the system did not generate an accounting document for the material document.
    The material document is a document that was posted before Release 2.1. Such documents must be converted so that the system can find the relevant accounting document.
    The procedure for the subsequent calculation of value is not active in your system. For further information, refer to the documentation on the program for valuating goods movements: RM07MWBU.
    Procedure
    Choose Continue and then choose another function.
    Find out when the material document was created. If the document was created prior to the Release changeover, ask your system administrator to carry out the conversion of the documents. The individual steps required for document conversion are described in the Release Notes for Release 2.1B.
    Regards,
    Alokesh

    Hello,
    Check Account assignment category  Goods recipt check box is flaged or not,
    SPRO---PurchasingAccount assignment category- check the falg mark for related account assignment.
    Check Material type of material is that material is valued or not in OMS2.
    Regards
    Mahesh Naik.

Maybe you are looking for