Acct Assg Catg Q and Item Catg D Combination

HI
Here the requirement is Acct Assg Catg Q and Item Catg D Combination required. But system is allowing the same.
Whr are the setting to make this?
Note : We hv 11 PO doc types and 5 PR doc types.
Combination item category D/account assignment category Q not defined
Message no. ME066
Procedure
Item category D and account assignment category Q may not be entered for the same item.
The permissible combinations of item categories and account assignment categories are determined in Customizing (Purchasing).)))))))))))))))))
Vijay

Hi Vijay,
I tried to send my contact details to you but it appeared it could not be sent successfully.  Anyhow, my contact address is ha dot tran at woodside dot com dot au
Cheers,
HT
P.S.  I was surprised that we can't add our address in this forum.

Similar Messages

  • Diff between Gen Item Catg Group & Item Cat group In MM01

    HI Gurus,
    What is the difference between Gen Item Catg Group & Item Cat group In MM01?
    Cheers,
    Chitty

    Hi
    There are several posts on same issue you can find out in sdn threads
    Item Category determines the processing of any Item/material that we enter in a sales order and in this way it also effects the procesing of any sales doc in which it is used.
    Item Category Group is one of the component which along with the Sales Doc Type, The Item Usage and Higher Level Item Category decide about the Item Category in a sales doc.
    for example we can ERLA as item cat group and carry out the header level pricing or we can LUMF and do the item level pricing in case of a Sales BOM.
    General item category group talks about further classification of a material. Like NLAG- non stock material can be used to identify bom header items, service items.
    Item category group and general item category group difference
    Re: difference between general item category group /item category group

  • Overall release and item-wise release at same time

    Hello,
    we use item-wise release for our PR strategy. Beside other we have the characteristic Account Assignment Category, which we assigned 'K' for our item-wise release. We also have the characteristic Cost Center.
    Now we wanna add a new strategy with Account Assignment Category 'F'.
    The problem is, if we do that with item-wise, it will not take affect, because the Cost Center Characteristic will be empty with Acct Assignment Category 'F'.
    Now I am wondering if I can create another class with overall release and implement the Account Assignment Category 'F' strategy. But right now, it does not come up after creating a PR with Acct Assgn Cat 'F'.
    so my question is, can I implement both classes (Overall release and item-wise release) at the same time?
    Thanks
    anne

    Item-level release is possible. This can be done as follows:
    Solution 1
    Enter a blank value in the cost center characteristic. You may need to change the characteristic definition (make it non-mandatory) for this.
    Then in case of F, it will find the blank cost center and still determine the release.
    If you have some misgivings in this, you can try the next solution.
    Solution 2
    Create a dummy cost center value in the characteristic for the purpose of release. Activate the user exit for PR Release. In this user exit, if the account assignment is F, change the cost center in the communication structure to the dummy value. This will ensure that the release is determined.
    Please let me know what happens...
    Lakshman

  • Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

    Hello All,
    As per my requirement I have a two custom list.
    Agent Details
    Port Name
    Agent Details contains Agent code, Port Name,  email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
    Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
    Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
    when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list. 
    After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
    name list) to Agent Details custom list.
    Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
    Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
    Is anything am doing wrong then please guide me.

    Hi,
    As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
    The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
    You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
    When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
    having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
    The articles below are about how to debug in the event receiver in SharePoint 2010.
    http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
    http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
    http://sharesaint.com/?p=77
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • On i-pad, when try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no my request and item not available in the U.S. store. WWJD?

    On i-pad, when I try to enable itunes match, it says, "you are not currently subscribed to iTunes Match. Use iTunes on your computer to subscribe." I am subscribed though! Then it says no to my request and, "item not available in the U.S. store." My Mac will not use update iTunes to any later version than the one I have because my os is also out of date, but when I try to update that i cant, so what do I have to do?  Please don't tell me I have to buy a new Mac to be up to date.

    On the iOS device you must be logged into the store with the exact same Apple ID you used to originally purchase the service. Go to Setting > iTunes & App Stores and if necessary sign out/in and then enable iTM.

  • Rororts on basis of vandor and item

    Hi All
    QUERY: I want a report where i will choose "vendor" and "item" and it will show me all the transactions with that particular vendor for a selected Item. Is there a process in standard feature or i hav to use drag and relate feature . Please help me out

    Hi Rahul
    There is a standerd report. Go to stock reports under inventory/Stock Management. The report is called "last prices report". Here you can say which BP and item and will give all transactions for that item.
    Hope this helps

  • Report to show the followup sales documents and items

    Sales had executed many sales quotations with customers over a period of time.
    Now the Sales Staff wanted to know how many sales documents and what/how many sales items are being purchased by the customer with respect to the quotation.
    Is there a report that list out the sales documents and items created w/respect to a particular quotation instead of looking at the document flow which is difficult to diagnose.
    Thanks

    hello, friend.
    you can try table VBFA, where you can see sales documents and their subsequent documents.
    for a general listing of quotations, use tcode VA25.
    regards.

  • Difference b/w Header and Item data........

    Hi,
        What is the difference between Header data and Item data ? Please tell me in detail.

    In SAP we have the various Level of Data...
    for example of a Sales Document.
    The Sales Header Data would Contain various bussiness flowws how the document should behave should it be a Sales Order or a Quotation or A frwee of charge delivery.
    Now the Item which you enter in the order the materails I mean will have the controls from the Item Data that you maintain in the Item categories.
    The Sales Order next to be delievered by a delivery so these data goes to the schedule line level control.....
    Hope you will get some light on what is explained above.
    regards,
    Amlan Sarkar

  • Get PO and Item number from FI Cleared Items

    Hi,
    I need to retrieve PO and item numbers from FI cleared items.
    So I retrieve the records for a particular GR/IR account from table BSIS.  Based on FI document number, item number, fiscal year and company code, I get the PO and item numbers from table BSEG.
    However, I cannot use BSEG in query i.e. SQ01.
    What is the easiest way for me to retrive PO and items numbers?
    Thanks.

    Hi,
    First of all, cleared items live in BSAS. BSIS is for the items that are still open.
    Goto SQ02 and make a direct table read to BSAS; click 'Extras' icon; on the right part of screen click 'Create' icon; give name BSEG and choose 'Additional table' radio button. The keys suggested by the system should be good.
    Regards,
    Ming

  • Report on delivery document and item

    Hi experts,
    I have some report requirements where i need delivery document number and item in the report. I wanted to hear some opinions on how to model this, i mean, should i add document number and item to the cube (0SD_C04) or should i build a DSo before and make the reporting over it?
    thanks in advance,
    Nuno
    @points assigned

    Hi,
    as usual it all depends on your requirements and the environment you are dealing with.
    a) how many documents are created daily/weekly/monthly? --> check the data volume
    b) what are the reporting requirements? --> will users expect lots of drill down/thru possibilities and short response times
    c) what is the time frame for keeping the doc numbers/items for reporting?
    I already added the doc no. to the cube for smaller companies creating may be a 2nd and 3rd cube after some time (2 - 3 years) combining them via multicube. In case you will have lots of drill downs/thrus this is may be the only performant solution because on a ods you might have to build tons of indexes to enable fast reporting. In case the documents are only relevant for a short period (e.g. the last 3 - 6 months) you might think about creating a ods and do selective deletions of the older data......
    regards
    Siggi

  • SAP SCRIPT Header text and Item text not printing in customized PO

    Hello Experts,
                          I have copied the standard MEDRUCK to ZMEDRUCK and customized the form according to the requirement.
    I want to print the header text and Item text in my form.
    For Header text I have used :
    /: INCLUDE &EKKO-EBELN& OBJECT EKKO ID F01
    Problem 1: The text what I enter in header text is flowing only when I hit on print preview without saving the form. Once I save the SAP SCRIPT  and click on print preview the field is appearing blank. I also tried to print the form, but the field is appearing blank even on the print out.
    Problem 2: For item text the field is concatenation of  EBELN & EBELP. Can anyone suggest me how to concatenate and fetch the text in item text.

    Hi,
        Im getting an error in my subroutine pool for i_xtline which is to fetch ITEM TEXT., It says its not a in any internal table nor defined as data. How can I proceed further. I have pasted my code below. Please check and revert ASAP
    PROGRAM  ZMEDRUCK_SUBP1.
    TABLES: EKPO, EKKO.
    FORM fetch_table_data TABLES in_tab STRUCTURE itcsy
                                 out_tab STRUCTURE itcsy.
    data xname like THEAD-TDNAME.
    data i_xtline like xtline.
    clear i_xtline.
    refresh i_xtline.
    CONCATENATE EKPO-ebeln EKPO-ebelp INTO v_item_text.
    MOVE v_item_text to ITEMTXT.
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
      CLIENT                        = SY-MANDT
        id                            = F01
        language                      = EN
        name                          = ITEMTXT
        object                        = EKPO
      ARCHIVE_HANDLE                = 0
      LOCAL_CAT                     = ' '
    IMPORTING
      HEADER                        =
      tables
        lines                         = i_xtline
    EXCEPTIONS
       ID                            = 1
       LANGUAGE                      = 2
       NAME                          = 3
       NOT_FOUND                     = 4
       OBJECT                        = 5
       REFERENCE_CHECK               = 6
      WRONG_ACCESS_TO_ARCHIVE       = 7
      OTHERS                        = 8
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDFORM.

  • How to send Sales Document Number and Item to BAPI_ACC_DOCUMENT_POST?

    Hello SAPients,
    We are using BAPI_ACC_DOCUMENT_POST to create an accounting document similar to what FB01 does, in FB01 you can type the number and position of a Sales Document even if you are using an Account Receivable account number. But in the BAPI, the  ACCOUNTRECEIVABLE table doesn't have a field to include those numbers. How should I pass the sales order number and item to the BAPI? I have tried several things but every time I receive more complicated error messages.
    Thank you in advance for your kind help.

    Let me know if you have any questions:
    Loop through your records and fill in the appropriate structure based on record type (GL, Vendor or Customer)
    IF NOT pcard_post_rec-zlsapac IS INITIAL.
        gt_gl_item-itemno_acc   = ls_posnr.
        gt_gl_item-gl_account = pcard_post_rec-zlsapac.
        gt_gl_item-comp_code = pcard_post_rec-zlsapco.
        "gt_gl_item-pstng_date = pcard_post_rec-zlgpsdt.
        gt_gl_item-pstng_date = gv_posting_date.
        gt_gl_item-doc_type = doctype.
        gt_gl_item-alloc_nmbr = ls_assignment.
        gt_gl_item-ref_key_3 = pcard_post_rec-zlgvend.
        IF pcard_post_rec-zlsapac < 500000.
          gt_gl_item-item_text    = ''.
        ELSE.
          gt_gl_item-item_text    = pcard_post_rec-zlguser.
        ENDIF.
        gt_gl_item-costcenter = pcard_post_rec-zlsapcc.
        gt_gl_item-orderid = lv_ordnum.
        APPEND gt_gl_item.
      ELSEIF NOT pcard_post_rec-zlsapven IS INITIAL.
        gt_ap_item-itemno_acc = ls_posnr.
        gt_ap_item-vendor_no = pcard_post_rec-zlsapven.
        gt_ap_item-comp_code = pcard_post_rec-zlsapco.
        gt_ap_item-alloc_nmbr = ls_assignment.
        gt_ap_item-ref_key_3 = pcard_post_rec-zlgvend.
        IF pcard_post_rec-zlsapac < 500000.
          gt_ap_item-item_text = ''.
        ELSE.
          gt_ap_item-item_text    = pcard_post_rec-zlguser.
        ENDIF.
        APPEND gt_ap_item.
      ELSEIF NOT pcard_post_rec-zlsapcus IS INITIAL.
        gt_ar_item-itemno_acc = ls_posnr.
        gt_ar_item-customer = pcard_post_rec-zlsapcus.
        gt_ar_item-comp_code = pcard_post_rec-zlsapco.
        gt_ar_item-alloc_nmbr = ls_assignment.
        gt_ar_item-ref_key_3 = pcard_post_rec-zlgvend.
        IF pcard_post_rec-zlsapac < 500000.
          gt_ar_item-item_text = ''.
        ELSE.
          gt_ar_item-item_text    = pcard_post_rec-zlguser.
        ENDIF.
        APPEND gt_ar_item.
      ENDIF.

  • Difference between sales order schedule line and item level data

    Hi All,
    Could you please let me know what is the difference between sales order schedule line and item level data?
    Thanks,
    Ramya

    Hi Ramya,
    Sales order schedule line contains del date, order qty, rounded qty, confirmed qty, delivery qty, schedule line category, purchase requisition etc.,  ie It contains the full details of sales order data with respect to the scheduled line of delivery.  The total quantity of a sales order item can be subdivided into schedule lines that contain the various subsets with the corresponding delivering dates.
    Sales order Item level data contains details of the item in the sales order like material code, net price, net value, UoM, PO details, reason for rejection if any, material group,billing date, plant etc., ie this
    contains the full details of item irrespective of scheduled line.
    Regards,
    R. Senthil Mareeswaran.

  • Please help to get onhand stock report with last purchase and billed date warehouse and item wise

    please help to get onhand stock report with last purchase and billed date warehouse and item wise

    Hi Rajeesh Ambadi...
    Try This
    SELECT distinct T0.ITEMCODE , t1.ItemName, T0.ONHAND as 'Total Qty',  
      T1.LASTPURDAT ,t1.LastPurPrc
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE
    INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD left join ibt1 t3 on t3.itemcode = t0.itemcode and t3.whscode = t0.whscode
    WHERE
    T0.ONHAND>0
    AND T0.WhsCode ='[%0]'
    Hope Helpful
    Regards
    Kennedy

  • I have an itunes acct with my iphone and my ipad and my daughters ipod - the account recognises all three as mine - can I open a separate itunes for my daughter and change the ipod to that - and still use my pc forall  updates forbo th accounts ?

    I have an itunes acct - with my iphone and ipad linked.  Also my daughter has an ipod -so I orignally linked it to my acct and it identified it as MY ipod.
    I now want to open a separate acct for my daughter - can this be done on the same PC/laptop and then change her ipod over to her acct ?

    Sure.
    See here for Creating Her Apple ID  >  http://support.apple.com/kb/HT5622
    It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    And here for  >  How to Use Multiple iDevices with One Computer
    Also have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And you may find this Video Link of Interest...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Maybe you are looking for