Overall release and item-wise release at same time

Hello,
we use item-wise release for our PR strategy. Beside other we have the characteristic Account Assignment Category, which we assigned 'K' for our item-wise release. We also have the characteristic Cost Center.
Now we wanna add a new strategy with Account Assignment Category 'F'.
The problem is, if we do that with item-wise, it will not take affect, because the Cost Center Characteristic will be empty with Acct Assignment Category 'F'.
Now I am wondering if I can create another class with overall release and implement the Account Assignment Category 'F' strategy. But right now, it does not come up after creating a PR with Acct Assgn Cat 'F'.
so my question is, can I implement both classes (Overall release and item-wise release) at the same time?
Thanks
anne

Item-level release is possible. This can be done as follows:
Solution 1
Enter a blank value in the cost center characteristic. You may need to change the characteristic definition (make it non-mandatory) for this.
Then in case of F, it will find the blank cost center and still determine the release.
If you have some misgivings in this, you can try the next solution.
Solution 2
Create a dummy cost center value in the characteristic for the purpose of release. Activate the user exit for PR Release. In this user exit, if the account assignment is F, change the cost center in the communication structure to the dummy value. This will ensure that the release is determined.
Please let me know what happens...
Lakshman

Similar Messages

  • PR Release..Overall is good, Item-wise error

    Hi,
    We used to have PR release without classificaiton. Today we decided to go with Workflow, so Recreated release procedure with classification. After Char Class routines, checked at OMGQCK, basic check is green and Overall Release is Green, but Item-wise release is red with message reading, "no release group exists". I used GFWRT from CEBAN for overall Release. Checked ovr rel flag at document level and release strategy level.
    When creating PR, release procedure not kicking in.
    Can someone help me please?
    Thanks
    Raj

    This is the problem of Uncleaned Release Startegy. Delete unwanted lines in CL24N before you configure new one. Since you have already configured new strategy, remove it and then delete corresponding line in CL24N.
    Check table T16FC-FRGGR and Tcode OMGQCK as well.

  • Duplicate item wise release pur requisitions

    Experts,
    We have item wise release procedure with classification set up for requistions.   We have begun work on new projects where leaders have received special delegation for releasing.  Is it possible to duplicate the release procedure for these leaders with special authorization for releasing so we can keep project approval separate from ongoing operations.
    Best regards,
    Diane

    Hi Diane
                  Maybe you can define a new release code for this users (adding this to the strategies of the project) and then asign this code to a new role. So this user will have two release code, one for the on going operation and one for the project operation.
    Hope It helps
    Regards
    Enzo

  • Item wise release strategy

    Hi Experts,
    I made item wise release strategy and used material group in class ,however when add this CEBAN-MATKL it doesn't find release strategy  when remove this release strategy is working  is it need to add something into material master data ?Need your advice
    Thanks in advance

    create release class, FRG_EBAN is available in system
    create release characterisitics .. here what ever name you give, you have to make it 'reference to table CEBAN' and corresponding CEBAN field , in additional data
    create a release group and attach the release class created
    create release codes, and while doing it you have to specify for which release group it is valid
    create release indicator , here specify the changeability
    create release strategy with release codes, release prerequisites, release statuses etc
    if you are transporting this, in the operational client, using CL24N  assign char values for each characterisitcs of release strategy. ( you need not assign char value when that characterisitic is not present int he document e.g.if account assignment is a char, then for release strategy for document without account assignment should not have any value for that char)
    if you ensure this much your release strategy should work ok

  • PR item wise release

    Dear Expertise,
    Would some body so kind to give me all the customization setting detail that require for purchase requisition  item wise release.
    Your earlier answer should be highly appriciated.
    Regards,
    sp sahu

    Hello Sahu,
    The following link will help you to understand release process and customization.
    http://help.sap.com/saphelp_46c/helpdata/en/9f/2d547bb435d1118b3f0060b03ca329/frameset.htm
    http://help.sap.com/saphelp_46c/helpdata/en/a7/2d547bb435d1118b3f0060b03ca329/frameset.htm
    in short,
    1. Define characteristic
    2. Define class
    3. Set up release procedure
    3.1. Define Release code
    3.2. Define Release Indicators
    3.3. Assignment of release indicators
    3.4. Set up Release pre-requisite
    3.5 Determine Release stretagy
    Hope this helps.
    Regards
    Arif Mansuri

  • Hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me

    hello i hav an ipad mini and i was in the middle of the ios 8 update and i held the sleep and home button at the same time to cancel the update and now it wants me to connect to itunes i dont no how to do that can someone pleaze help me?

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My ipad will not let me slide to log in, or power off. i have tried to hold down the sleep and home button at the same time, but that did not work. Do you have any tips for me? Thanks

    my ipad will not let me slide to log in, or power off. I have tried to hold down the sleep and home button at the same time, but that did not work. D o you have any tips for me? Thanks.

    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • What can I do if I press the home and sleep botton at the same time and it doesnt take a picture?

    What can I do if I press the home and sleep botton at the same time and it doesnt take a picture? I want to take a picture of something in the internet and I cant! I used to be able to do it but now, it doesnt work anymore? What can I do?

    Press and hold the home button
    Quickly press and release the sleep button
    Release the home button
    You'll hear a shutter click
    The screenshot will be in your camera roll

  • HT4061 My phone can't turned on. I tried to press the home button and main button at the same time, but not working. what should I do?

    Iphone 4s can't turned on, goes total black. Tried to press button and main button at the same time, but not working. what should I do?

    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn phone off
    hold home button and plug cable into phone.  do not release home button until an itunes graphic appears on device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • My ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!

    my ipad is on an infinite loop.  I used ios7 for a few days and then did updates on some of my apps. that's when the infinite loop started.  I have tried pressing the power and home button at the same time, but it doesn't work. Please help!
    I even tried some hints posted for ios6 (turn off Ipad, holding home button and plugging in power cord at the same time and then releasing the home button)
    I did manage to get a different screen that shows the itunes icon and a power cord, but nothing happens.

    You were on the right track. You got the connect to iTunes screen and you ended to use iTujes to restore your iPad. Try recovery mode again.
    Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?

    I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
    i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplain

    Firstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
    It isn't the retail version, because that's 10.6.3.
    Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
    OK the language page.
    From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
    Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
    Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
    When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
    If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult.

  • Urgent! Display lookup value and return value at the same time.

    We are using pop up lov.
    How can we display lookup value and return value at the same time. let me claer..
    Our lov query is like fallowing
    select dname, deptno from dept
    we want to return deptno column into a database bind text item and dname column into a display item (look up)
    can we do it (we need to do)
    thanks for your help.

    We did it .
    But pop up key lov (display description return value ) property doesn't appear for tabular forms item.
    (Report Attributes pages Tabular Form Element section display As property list)
    can we set or not.
    Thank you.

  • Bash script: Rotate your wallpaper and SLiM theme at the same time

    EDIT;
    I've decided I should really thank Cerebral for his help with writing this script; this thank you should have been here from the get go.
    After writing:
    #!/usr/bin
    echo "Hello World!"
    I wrote a script to rotate my fluxbox background and SLiM theme at the same time, so I could have a contiuously changing background and still have a smooth transition from SLiM to fluxbox.  (It just looks so much cooler when both have matching backgrounds).  By the time you finish reading it, and configuring your box so it will work, you will probably have decided you could have writtin your own, better script to do the same thing.  But, on the off chance anybody finds use for it, here it is:
    (this should be obvious, but: don't run this script without at least reading the comments)
    #!/bin/bash
    #this is a script to rotate a number of backgrounds
    #to be shared by the fluxbox desktop and SLiM login manager.
    #it is the first meaningful script I've written. It may be
    #freely distributed and used with the understanding that you are
    #using it at your own risk.
    #Before running this script you need to check that your SLiM
    #themes are installed to the path /usr/share/slim/themes, which
    #is the defulat path for installation in Arch. Here are some
    #other things you need to set up:
    #1. create (if you don't have it) the directory /usr/share/wallpapers
    #2. create a wallpaper in /usr/share/wallpapers called 'dummy' by copying
    #you current wallpaper to that filename
    #3. set your window manager to display the wallpaper 'dummy', this works fine
    #using a style overlay in fluxbox, I haven't tested it with any other window
    #manager, but I don't see why this would cause a problem.
    #4. create a directory /usr/share/slim/themes/current, you can copy one of
    #your slim themes into that directory if you want. (this will prevent you
    #from seeing some error messages the first time you run the script)
    #5. define the names of the themes you want to rotate, in order for this
    #script to work, you must name them "themeNUMBER", where NUMBER is replaced
    #by an integer. Your themes must be numbered consecutively, start with 1
    # that is:
    #theme1 , theme2, theme3, etc. , theme305
    #If you don't number consecutively, this script will not run properly. You
    #must also define the total number of themes as "rotate_number"
    #6. Check if the script runs, if it does, you should change /etc/slim.conf to
    #use the theme "current"
    #7. This theme will now rotate your SLiM theme and wallpaper in such a way as
    #to make them match each other. Note that SLiM will not let you change themes
    #"on the fly", (as of July 6, 2008), so changes will not be apparent unless you
    #restart SLiM. I run the script before I run slim in my etc/rc.local local
    #script, so each time I reboot I get different wallpaper / login background.
    #Fred Drueck 2008
    #Define here all themes to be rotated and the total number of
    #themes to rotate:
    rotate_number=9
    theme1=/usr/share/slim/themes/default
    theme2=/usr/share/slim/themes/lake
    theme3=/usr/share/slim/themes/lunar
    theme4=/usr/share/slim/themes/flower2
    theme5=/usr/share/slim/themes/the-light
    theme6=/usr/share/slim/themes/mindlock
    theme7=/usr/share/slim/themes/parallel-dimensions
    theme8=/usr/share/slim/themes/wave
    theme9=/usr/share/slim/themes/fingerprint
    #check you are running this script as super-user:
    if [ $(id -u) != "0" ]; then
    echo "You must be the superuser to run this script" >&2
    exit 1
    fi
    echo "rotating themes"
    #figure out which theme is currently set, then name it as the variable
    #"last theme number", otherwise set last theme number as 0
    if [ -f /usr/share/slim/themes/current/current_theme_number ]
    then
    echo "checking current theme"
    cd /usr/share/slim/themes/current/
    eval last_theme_number=$(cat /usr/share/slim/themes/current/current_theme_number)
    echo $last_theme_number
    else
    echo "no theme is currently set, using theme 1"
    last_theme_number=0
    echo $1 > /usr/share/slim/themes/current/current_theme_number
    fi
    #set the new theme number
    eval new_theme_number=$(($(($last_theme_number % $rotate_number))+1))
    #select the new theme
    placeholder=theme
    eval new_theme=\$$placeholder$new_theme_number
    echo $new_theme
    #now clean out the "current" theme where I keep the current
    #theme for slim
    rm /usr/share/slim/themes/current/background*
    rm /usr/share/slim/themes/current/panel*
    rm /usr/share/slim/themes/current/slim.theme
    #the wildcards are there since the themes use jpg and png files
    cp $new_theme/background* /usr/share/slim/themes/current
    cp $new_theme/panel* /usr/share/slim/themes/current
    cp $new_theme/slim.theme /usr/share/slim/themes/current
    #increase the theme number, but first clear the old file
    rm /usr/share/slim/themes/current/current_theme_number
    echo $new_theme_number > /usr/share/slim/themes/current/current_theme_number
    #copy over the dummy wallpaper in "/usr/share/wallpapers" (with the theme
    #background file
    cp $new_theme/background* /usr/share/wallpapers/dummy
    exit 0
    Last edited by pseudonomous (2008-07-07 21:59:42)

    oh i forgot to mention... its rotating while moving. i.e. is doesn't have to stop rotate and then continue back to origin.

  • How do I make Organizer and Editor open at the same time?

    I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
    Thanks,
    K

    Create Desktop shortcuts for the Organizer and the Editor:
    The Editor's executable is:
    "C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    The Organizer's executable is:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    Ken

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

Maybe you are looking for