ACE4700 software selectable version.

When I selected “Cicco ACE 4700 Series Application Control Engine Appliances” as product
in the BugToolkit, listed Software Version doesn't match with ACE4700 released version.
(and also I can select IOS version even ACE4700 doesn’t run IOS)
Could you please fix this problem?
ie) ACE4700 release note shows following A3 versions, therefore I couldn’t see these
versions at selectable software version list on the bugtoolkit.
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/vA3_x/release/note/RACEA3X.html
•A3(2.7)
•A3(2.6)
•A3(2.5)
•A3(2.4)
•A3(2.3)
•A3(2.2)
•A3(2.1)
•A3(2.0)
•A3(1.0)
BugToolkit software version can selet as follows, but these are not match with released version.
5.1, 4.2, 4.0, 3.3, 3.0AB, 3.0A,... etc.

Masahide,
This happens because some bugs that are mapped to the ACE4700 product contain IOS version numbers. We found it more prudent to include all bugs that affect the product than to exclude some bugs based on erroneous information in some fields.
This is a challenge for many products in Bug Toolkit and an area we are looking to improve in the future.
Regards,
Wes

Similar Messages

I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything

Hi, I upgraded my iPad to version 5.0, I had a message on my Setting to upgrade the software to version 5.0.1, I select install and during installation my iPad2 star rebooting and now doing it non stop. I have no time to restore or do anything. My ipad rebooting every 2 or three minutes

See Here
iPad Unable to Update or Restore
http://support.apple.com/kb/ht4097

Can not view a Software Component Version in Enterprise Services Repository

Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--erva

Hi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

Can no longer open PDF files from my emails sent from other websites. Problem seems to correlate with automatic upgrade of free adobe software (from version 11 to Reader DC)?

To configure the browser to use Acrobat or Adobe Reader to open PDF files:
1. Quit Internet Explorer(any other browser)
2. Start Acrobat or Adobe Reader.
3. Choose Edit > Preferences.
4. Select Internet in the list on the left.
5. Deselect(Uncheck) Display PDF in Browser, and click OK.
6. Restart Internet Explorer

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
                                    OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1.      Call the wizard-based configuration tool as described in Configuration Wizard.
       2.      Select the scenario PI and the task PIPostInstallProcess.
       3.      Choose Execute.
A list of the steps to be executed by the wizard is displayed.
       4.      Choose Install.

Software Component Version

Hi Friends,
I maintained two Namespaces(say Name1, Name2) under a Software Component version.
I developed a scenario under Name2. But i found it wrong. So I deleted all the objects in it like interface objects, mapping objects and also ExchangeFaultData, ExchangeLogData by mistake. Now iam trying to delete the whole namespace from SWCV. But Iam unable to go to the edit mode of SWCV and also iam unable to activate the SWCV.
Please do help me to delete the namespace under the SWCV

Sorry Typing Mistake.
First Delete all the objects that u have created in that namespace. Once that is done activate the scenario.
After that delete Exchange log, Fault data type. Then go to software component and delete name space. Save the SWC component and then activate the SWC.
Let me know if u face any problem.
If u delete any object by mistake, u can go to change list, select object and say reject change.
-Gouri

Proxy error- unable to find software component version for namespace-

Hi all,
I need help regarding proxy.
I am using SAP standard package for one integration PI 7.0 to SRM.
Here we need to use the datatype enhancement for adding some fields. So I create one extension_datatype in the datatype enhancement and add the fields .
( I am using Inbount interface, where I am adding the new fields in PI)
Now when I go to SRM system and Run SPROXY system to regenerate the Proxy. So that It can reload the New fields.
Then it reloads and We activate the same.
Now at one place when I clicked the data type enhancement object its giving the error that unable to find software component version for namespace" . I did not understand why its giving the error. I added the new fields in the existing running datatype enhancement. and reload the reproxy.
I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error.
Please help , how to resolve it asap.
regards
ram

1.the datatype enhancement object may not be activated in the same software component .
for this try these -
after creating your data types and designing part. First close all the developement objects windows.
then click on your sw component which you have created and activate it very first.
then you will be able to activate all other objects
or when you start activating your data types a new window with list of the objects which you want to activate opens
in this new window you can see your sw component as the very last object select it first and activate it
2. update the cache in both system
i think these 2 reasons.u try it.

HANA on SLES 11 SP3 for SAP software selection

Hi,
We are planning to install HANA SPS8 on a Vitual Machine with SLES 11 SP3 for SAP.
ABAP 7.4 and HANA on the Same virtual Machine
During the Installation of SUSE in the software selection screen, we found the options as
- SAP Netweaver Server Base
- SAP HANA Server Base
We would like to know, whether we have to select these options for the SUSE Installation or only
SAP Application Server Base would be enough.
Thanks,
Regards
Ahmed Mohammed

Hi,
Tuxedo 10.0 extended support ends in September of this year. If you are making the move from 32 bit versions to 64 bit versions you should definitely move to newer versions of Tuxedo. Tuxedo 12.1.1 has been out nearly three years at this point and is certified for Suse Linux 11 64 bit. Is there a reason you are staying on such an old version of Tuxedo while upgrading the OS?
Regards,
Todd Little
Oracle Tuxedo Chief Architect
PS For more information about support lifetimes, see: http://www.oracle.com/us/support/library/lifetime-support-middleware-069163.pdf
Also if you would like to go all the way to Tuxedo 12.1.3, please ask for a certification in My Oracle Support.

Error while importing XI Content for Software compnent version

Hello All
We have Installed XI system and working on Post Installation Activities.
As per the Installation Guide We are trying to import XI Content for Software Component version in to the Integration Builder,
In the integration builder , when we select
tools-->import design objects , we are able select ".tpz" file and when we hit "Import" button we are getting the following message.
<u><b>" Attempt to save object "Adapter Metadata XiConnectivity | http://sap.com/xi/XI" failed You can proceed with the transport though objects with errors will be ignored. This may cause inconsistencies in other objects after import. Do you want to proceed?"</b></u>
Can you help us how to resolve this problem?
Thank you
Srinivas Vadiguri

Hi,
did you go thru XI readiness check / if not refer SAP Note -817920
Hope this helps,
Regards,
Moorthy

Transport products and software component version

Hi,
I created a Products and its Software Component Version in System Landscape Directory of XI development.
I imported this Software Component Version into Integration Builder and developed design and configuration objects.
The scenario is completed and now I want to transport the Products and Software Component Version to XI Production.
Could someone please explain the transport procedure.

Hi Shravan,
Thanks four your instructions. I would like to have more details on the export/import procedure. Please confirm the following steps are correct:
From SLD of XI development:
1/ Edit new product and its software component version.
2/ Click on icon Export: XI generates a zip file and downloads it in c drive.
From SLD of XI Production:
1/ Select Import utility under system catalog.
2/ Browse and select the zip file
In XI production there are existing third party products, and I do not want the transport of this new product causes any problem.
Design and configuration objects will be exported/import ed after the successful transport of product and software component version transport.
Regards,
Daniel

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

Some Software Component Versions do not show up in transaction sproxy

I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?

Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor

HT4623 I having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I cannot update through my iphone & through itunes. Each time I tried a message appeared saying iphone software server cannot be contacted. Please, help

I am having difficulty in updating my iphone 3GS software from version 4.1 to version 5.1. I tried using my phone but cannot find the update software button even when I have gone through the right process by tapping SETTING, then GENERAL, yet could not find Update Software button. I mean the update Software button is not seen there.
I tried using itunes, yet no way. Each time I connect my iphone to my laptop itunes software comes up automatically and alerts me that a newer version of software for my iphone is available, It usually gives me the option of Download & Install or Download Only. Whichever of the option I click a message will always appear telling me that the iphone update server could not be contacted, then asking me to make sure that my network settings are correct and active or try again latter. Sometimes, when click on the Update button on my itune software. It will display an error has occured.
I have even tried to Restore iphone from itunes, yet the problem keep repeating itself.
Can anyone help me?

Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now.

How to add own selection version in LDB selection

Friends,
I'm using the logical database KDF. Is it possibe to add selection version in the KDF?? I tried to edit the selection of KDF but system asks for developer key.
Please suggets a way.
Many Thanks,
Albert.

Hi,
you can use the following statements to extend the selection screen:
· Use the PARAMETERSstatement and its additions to add input fields for single values. You could use these, for example, to control the flow of the program. In the selection include, you must use the addition FOR NODE or FOR TABLE in the PARAMETERS statement. You can use NODE for all node types. You can only use TABLE for nodes with type T. When the selection screen is generated, the system only generates fields for the nodes declared in the executable program in the NODES or TABLES statement, or those requested by the function module LDB_PROCESS.
· Use the SELECTION-SCREENstatement to format the selection screen.
· The statement
SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE|TABLE node.
allows you to define further nodes for dynamic selections. If the node has type T, you can use TABLE instead of NODE. The user can then decide at runtime the components of the node for which he or she wants to enter selections. Dynamic selections require special handling in the database program.
· The statement
SELECTION-SCREEN FIELD SELECTION FOR NODE|TABLE node>.
allows you to define further nodes for field selections. If the node has type T, you can use TABLE instead of NODE. In an executable program, you can use a field list in the GET statement to specify which fields of the node of the logical database should be read. In the function module LDB_PROCESS, the parameter FIELD_SELECTION must be passed accordingly. Dynamic selections require special handling in the database program.
· The statements
SELECTION-SCREEN BEGIN OF VERSION dynnr
SELECTION-SCREEN EXCLUDE f.
SELECTION-SCREEN BEGIN OF VERSION dynnr.
allow you to create different versions of the selection screen with screen number dynnr less than 1000. You can hide the input fields of selection criteria or parameters as specified in f. This allows an executable program to work with an appropriate selection screen version.
See the below SAP link....
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9c2e35c111d1829f0000e829fbfe/content.htm
Regardds
Sudheer

ACE4700 software selectable version.

Similar Messages

Maybe you are looking for