ACI - Date Range issue for Sales Details report

I am working on ACI setup for one of my client. I set everything us as per documentation.
This is regarding ‘Sales Details’ (Public Folders > ATG > Commerce > Sales > All Sales) report.
Report is being generated if I select ‘Date Range’ under ‘Time Period’; but if I select ‘Predefined’ I get below errors:
RQP-DEF-0177
An error occurred while performing operation 'sqlPrepareWithOptions' status='-9'.
UDA-SQL-0107 A general exception has occurred during the operation "prepare".ORA-32035: unreferenced query name defined in WITH clause RSV-SRV-0042 Trace back:RSReportService.cpp(758): QFException: CCL_CAUGHT: RSReportService::process()RSReportServiceMethod.cpp(239): QFException: CCL_RETHROW: RSReportServiceMethod::process(): promptPagingForward_RequestRSASyncExecutionThread.cpp(774): QFException: RSASyncExecutionThread::checkExceptionRSASyncExecutionThread.cpp(211): QFException: CCL_CAUGHT: RSASyncExecutionThread::run(): promptPagingForward_RequestRSASyncExecutionThread.cpp(824): QFException: CCL_RETHROW: RSASyncExecutionThread::processCommand(): promptPagingForward_RequestExecution/RSRenderExecution.cpp(593):
Has anybody come across this issue?
Any help in this regard will be highly appreciated.
Thanks,
Mukesh

Contact Oracle support. I think we've seen this one before if using a particular version of Oracle(11.1?). There's a particular version of Oracle that doesn't support queries in a WITH clause that aren't referenced in the main query. Cognos seems to generate these types of queries not knowing that the version of Oracle doesn't support it. According or Support Article ID 1063400.1 you can patch this particular problem with Oracle or you can upgrade to Oracle 11.2. I also think that was a to get Cognos to generate an alternative query that doesn't use the WITH clause at all. Something about disabling the use of WITH in all queries by making a change to the report definition or alternatively a global change to the metadata model.
Good luck...
Andrew

Similar Messages

XL Reporter: Date Range issues

I would like to setup a P&L to get the data from a date range.
At the "Advanced Report Buider", tab "Report Default", I entered the following code into "Complete Selection":
PER( Code >= @PeriodStart Or Code <= @PeriodEnd )
@PeriodStart: parameter point to "Code" of "Financial Period" table
@PeriodEnd: another parameter point to "Code" of "Financial Period" table
Everytime I run the report, it gave me the latest balance instead of the balance within the specified date range.
Please kindly advise.
Thanks in advance,
Vivian

Or is not correct. It should be And.
Thanks,
Gordon

Standard Extractor for Sales Overview report

Hi Experts,
Can you all please help me in finding the Standard Extractor for Sales Overview Report, fields like Product Group, Product, Net Sales, Billed Qty, Sales Plan, % Variance Plan etc are present in this report, i tried to search this in transaction RSA5 but wasnt able to find it. Also, if there is no std extractor then can you please provide me the name of the database table so that i can create a generic datasource on it.
Thanks & Regards,
Amit Naik

Hi Sathya,
I have received an initial Requirement from the Client (Please refer the list below), It gives us the Report Name & the fields involved in it, i need to tell them the feasibility, can you help me on this? Are there any std reports available for the same?
Report                          Possible fields
On Time Delivery-     Month to date on time in full, Year to date on time in full
Pick Performance-     Days from Pick List Receipt to Despatch
Delivery Performance-     Days from Order receipt to despatch
Costs-                          Total Cost per unit despatched,Labour Cost per unit despatched,Monthly spend vs budget by cost centre
Stocks-                          Openshaw Stock Volume vs budget,Openshaw Stock Value vs budget,Stock Movement by product / range month on month,Stock Turn
Returns-                          Volume and Value by major type
Orders in Pick-     Volume and Value
SMU-                          Outstanding Special Make Up Work
PI -                          Percentage bins 100% accurate
Space-                          Count of empty bin locations
Progress to Budget for month-     Budget, Forecast and latest estimate.,Invoiced to date, in pick, outstanding,Shortfall to find.
Profit and EBITDA-     By Brand / Customer / Account
Monthly pack     -                     Equivalent
Outstanding PO's-     Volume and Value, by brand / category,Expected receipts this week,View of inbound scheduler (Empirica)
Vendor Management-     Value of PO's with major vendors,Vendor on time delivery,Vendor Rejections / QC problems
In Bound Carriage-     Cost of Carriage for month vs budget,Airfreights agreed,PO's Inbound
Out of Stock Report-     Items where there is zero or projected to be zero stocks,Back Order volume value
Progress-                          Number of designs in development,Number of designs late against Critical Path
Thanks & Regards,
Amit Naik
Edited by: Amit Naik on Sep 20, 2010 9:28 AM
Edited by: Amit Naik on Sep 20, 2010 9:35 AM
Edited by: Amit Naik on Sep 20, 2010 9:38 AM
Edited by: Amit Naik on Sep 20, 2010 9:43 AM

I have number range issue for fi posting.

hi gurus,
i have number range issue for fi posting (fb01,fb50).
problem in updating table glpca due to duplication of record.
INSERT GLPCA FROM TABLE T_GLPCA .
With Regards,
Shakthi Raj N.

error msg after generating document no and it is not getting updated in data base
error msg
"Express document "Update was terminated" received from author "ecciabap""
Client.......   750
User.....   ECCIABAP
Transaction..   FB01
Update key...   C83B07DE4DADF13CB4950017A4AB8015
Generated....   02.03.2009, 20:37:23
Completed....   02.03.2009, 20:37:23
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

BAPI For Create Goods Issue for Sales order with picked quantity

Hi friends,
Is there any BAPI available to create Goods issue For sales order with picked quantity...............?
we hv used BAPI_OUTB_DELIVERY_CREATE_SLS
with sales order .......its creating delivery order but not doing goods issue with piked quantity........

pls,reply its argent

Quality inspection for the items issued for Sales order

Hi, How to map the qc for the items issued for sales order?

Dear Yadav,
-Activate insp type 10 in the Material Master-QM view insp setup (MM01)
-Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
-Create Sales order (VA01)
-Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
-Do results recording and take usage decision (QA32)
Note:
-This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
-Post Goods issue in the delivery can be made only after taking the usage decision.
Regards,
Keerthi.

Neen help with date range searches for Table Sources

Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 24-MAR-07, 22-SEP-), 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks, in advance….

raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!

Need help with date range searches for Table Sources in SES

Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….

raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!

SAP Mobile Sales 2.0 delta load issue for Sales Orders

Hello,
we have used Mobile Sales 2.0 with a Windows app for a while now. Our current issue is that sales reps won't see any historical sales order data on their devices.
Background
Due customer requirements, we need to make small changes to customer master data attributes and reload all customers from ERP to CRM. Then we ran delta loads (MAS_PARTNER followed by all other objects) to DOE, in which virtually all 5000+ customer accounts were compared. The delta load ran for about 3 days (some performance bottleneck we haven't located yet).
During the delta load, data on devices was inconsistent. Accounts were missing and all transaction data disappeared. After the delta loads, all accounts and contacts are OK, save for a few. Data from activities (appointments, tasks) have reappeared, as they should. Only sales orders won't reappear. The sales orders exist in the backend and belong to active accounts and sales reps.
Settings and troubleshooting so far
We don't have any limitations for sales orders in CRM Sales Mobile configuration.
We've run delta loads for all objects in transaction SDOE_LOAD.
MAS_CUSTOMIZATION etc seem fine.
We've re-run initial load for sales orders from CRM.
In the test system, we've even reinitialized the whole CDS database on DOE and on the devices, then re-ran the loads.
Checked steps suggested in discussion
SAP CRM 2.0 initial load issue
Historical sales orders (those created before the master data reload) exist in the backend, but don't show up on the device.
If I change one of those historical sales orders in the backend, it gets sent to the device.
If I create a new sales order in the backend or on the device, it is saved and replicated just fine.
To sum it up, it seems DOE is unable to identify the sales orders relevant for replication.

First Doubt i got clarify by my self as we can go with Unwired Runtime option .
But i still have doubt in :
2. How can i Modifying the Main Menu for iOS.
i am able to customize the same for windows using files SybaseCRM.Configuration.xml file.
Same how can i do for iphone/ipad.

Date Range Issue

Hi Experts,
I have created a linked server to connect to mysql DB . The query is executing fine currently filter is based on the on going month.
The query actually fetches the records from 2 tables User and time sheet to find how many hours the users have .
Now we check the Hours for a period of 10th of the current month and 10th of the upcoming month .
So for now date range will be between 2014/10/05 and 2014/10/06. This logic i have implemented in the query .
Based on the query a report is generated which is sent out every Wednesday .Now suppose its 5th of June 2014 .
The query will fail because the date range is derived based upon
where cast(t.created_on as Date) > Concat(year(now()),"-",month(now()),"-","10")
AND cast(t.created_on as Date) <=Concat(year(now()),"-",month(now())+1,"-","10")
Please provide with a date filter like the report runs anytime the data is not affected. Like if the report is run in the
first week of a new month date range should be previous month Date 10 and current month Date 10 and if the report is run after 10th of the current month then the date range should be between 10th of current month and 10 of upcoming month . Kindly
help
Select * From
OPENQUERY
(Mysql,
'Select
Sum(t.hours),
Concat(u.firstname," ",
u.lastname) as Name
From mysql.time_entries t
Inner Join
users u
on u.id = t.user_id
where cast(t.created_on as Date) >
Concat(year(now()),"-",month(now()),"-","10")
AND
cast(t.created_on as Date) <=Concat(year(now()),"-",month(now())+1,"-","10")
Group By u.firstname,u.lastname
Union all
Select Sum(0) as hours,
Concat(firstname," ",
lastname) as Name
from users
where id not in(
Select
t.user_id
From mysql.time_entries t
Inner Join
users u
on u.id = t.user_id
where cast(t.created_on as Date) >
Concat(year(now()),"-",month(now()),"-","10")
AND
cast(t.created_on as Date) <=Concat(year(now()),"-",month(now())+1,"-","10"))
And firstname not in( "xyz")
GRoup by firstName,lastname'
go

I recommend use CLOSED-OPEN dates rather than OPEN-CLOSED dates...
Hopefully this helps with your logic:
DECLARE @ReportDate TABLE
[ReportDate] DATE,
[mDay] AS DAY([ReportDate]),
[Beg] AS DATEADD(month, CASE WHEN DAY([ReportDate]) < 10 THEN -1 ELSE 0 END, [ReportDate]),
[End] AS DATEADD(month, CASE WHEN DAY([ReportDate]) < 10 THEN 0 ELSE 1 END, [ReportDate]),
[ReportBeg] AS DATEADD(month, CASE WHEN DAY([ReportDate]) < 10 THEN -1 ELSE 0 END, DATEADD(day, 10 - DAY([ReportDate]), [ReportDate])),
[ReportEnd] AS DATEADD(month, CASE WHEN DAY([ReportDate]) < 10 THEN 0 ELSE 1 END, DATEADD(day, 10 - DAY([ReportDate]) + 1, [ReportDate]))
INSERT INTO @ReportDate(ReportDate)
VALUES
('7-May-2014'),
('10-May-2014'),
('15-May-2014');
SELECT
CASE WHEN SYSDATETIME() >= [ReportBeg] AND SYSDATETIME() < [ReportEnd] THEN 1 ELSE 0 END
FROM @ReportDate;

Date difference issue for Purchase order in R/3 and APO

Hi,
I am sending the purchase order from APO to R/3. When I transfer the data through CIF and see the curresponding entries in stock requirement list in R/3, purchase order is 1 day earlier than in SCM.
However, when this purchase order is CIFed back to SCM, date appears correct in SCM ( as what it was before). Is this something because of timezone that difference in date appears in SCM and R/3.
Can someone who came across date issues for transaction data transfer between SCM and R/3 elaborate in more detail please.
Thanks,
Sanjay

Hello Somnath ,
I am also facing the same issue which sanju was facing earlier in PRs .
In APO I am not able to understand how system calculates the opening , start and end date .In my case the transportation time is 48 hrs , planned delivery time is 1 day and all calenders are 5*24 , GR proceeeing time .01 day . When I am creating PR at destination location on 06/06/2008 , 24:00:00 Hrs . System calculates the dates as follows :-
Start date -06/05/2008 , 00:45:00 , end date -06/06/2008, 24:00:00 , opening date -05/20/2008 ,23:25:00 Hrs . I tried to understand the formula given by you in your reply as Opening Date = Requirement Due Date - GR Time - Planned Delivery Time
Start Date = Requirement Due Date - GR time - Transportation Duration
End date = Requirement Date.
But I am not getting the desired results.
Could you let me know why the system is behaving in such way.I also want to know does system can create orders in such a way the opening date lies in past. If yes then can we restrict that ?
Regards ,
Mukesh
Edited by: Mukesh Kumar on Mar 9, 2008 1:59 PM

Data pump issue for oracle 10G in window2003

Hi Experts,
I try to run data pump in oracle 10G in window 2003 server.
I got a error as
D:\>cd D:\oracle\product\10.2.0\SALE\BIN
D:\oracle\product\10.2.0\SALE\BIN>expdp system/xxxxl@sale full=Y directory=du
mpdir dumpfile=expdp_sale_20090302.dmp logfile=exp_sale_20090302.log
Export: Release 10.2.0.4.0 - Production on Tuesday, 03 March, 2009 8:05:50
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Produc
tion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-31626: job does not exist
ORA-31650: timeout waiting for master process response
However, I can run exp codes and works well.
What is wrong for my data pump?
Thanks
JIM

Hi Anand,
I did not see any error log at that time. Actually, it did not work any more. I will test it again based on your emial after exp done.
Based on new testing, I got below errors as
ORA-39014: One or more workers have prematurely exited.
ORA-39029: worker 1 with process name "DW01" prematurely terminated
ORA-31671: Worker process DW01 had an unhandled exception.
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06512: at "SYS.KUPC$QUEUE_INT", line 277
ORA-06512: at "SYS.KUPW$WORKER", line 1366
ORA-04030: out of process memory when trying to allocate 65036 bytes (callheap,KQL tmpbuf)
ORA-06508: PL/SQL: could not find program unit being called: "SYS.KUPC$_WORKERERROR"
ORA-06512: at "SYS.KUPW$WORKER", line 13360
ORA-06512: at "SYS.KUPW$WORKER", line 15039
ORA-06512: at "SYS.KUPW$WORKER", line 6372
ORA-39125: Worker unexpected fatal error in KUPW$WORKER.DISPATCH_WORK_ITEMS while calling DBMS_METADATA.FETCH_XML_CLOB [PROCOBJ:"SALE"."SQLSCRIPT_2478179"]
ORA-06512: at "SYS.KUPW$WORKER", line 7078
ORA-04030: out of process memory when trying to allocate 4108 bytes (PLS non-lib hp,pdzgM60_Make)
ORA-06500: PL/SQL: storage error
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucpcon: tds)
ORA-04030: out of process memory when trying to allocate 16396 bytes (koh-kghu sessi,pmucalm coll)
Job "SYSTEM"."SYS_EXPORT_FULL_01" stopped due to fatal error at 14:41:36
ORA-39014: One or more workers have prematurely exited.
the trace file as
*** 2009-03-03 14:20:41.500
*** ACTION NAME:() 2009-03-03 14:20:41.328
*** MODULE NAME:(oradim.exe) 2009-03-03 14:20:41.328
*** SERVICE NAME:() 2009-03-03 14:20:41.328
*** SESSION ID:(159.1) 2009-03-03 14:20:41.328
Successfully allocated 7 recovery slaves
Using 157 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 12911, block 2, scn 7355467494724
cache-low rba: logseq 12911, block 251154
on-disk rba: logseq 12912, block 221351, scn 7355467496281
start recovery at logseq 12911, block 251154, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 185319Kb in 1.73s => 104.61 Mb/sec
Total physical reads: 189333Kb
Longest record: 5Kb, moves: 0/448987 (0%)
Change moves: 1378/5737 (24%), moved: 0Mb
Longest LWN: 1032Kb, moves: 45/269 (16%), moved: 41Mb
Last redo scn: 0x06b0.9406fb58 (7355467496280)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 847056/876618 = 1.0
*** 2009-03-03 14:20:46.062
KCRA: start recovery claims for 35384 data blocks
*** 2009-03-03 14:21:02.171
KCRA: blocks processed = 35384/35384, claimed = 35384, eliminated = 0
*** 2009-03-03 14:21:02.531
Recovery of Online Redo Log: Thread 1 Group 2 Seq 12911 Reading mem 0
*** 2009-03-03 14:21:04.718
Recovery of Online Redo Log: Thread 1 Group 1 Seq 12912 Reading mem 0
*** 2009-03-03 14:21:16.296
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 3
Average hash chain = 35384/25746 = 1.4
Max compares per lookup = 3
Avg compares per lookup = 849220/841000 = 1.0
*** 2009-03-03 14:21:28.468
tkcrrsarc: (WARN) Failed to find ARCH for message (message:0x1)
tkcrrpa: (WARN) Failed initial attempt to send ARCH message (message:0x1)
*** 2009-03-03 14:26:25.781
kwqmnich: current time:: 14: 26: 25
kwqmnich: instance no 0 check_only flag 1
kwqmnich: initialized job cache structure
ktsmgtur(): TUR was not tuned for 360 secs
Windows Server 2003 Version V5.2 Service Pack 2
CPU : 8 - type 586, 4 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:7447M/8185M, Ph+PgF:6833M/9984M, VA:385M/3071M
Instance name: vmsdbsea
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
Windows thread id: 2460, image: ORACLE.EXE (SHAD)
Dynamic strand is set to TRUE
Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
*** 2009-03-03 08:06:51.921
*** ACTION NAME:() 2009-03-03 08:06:51.905
*** MODULE NAME:(expdp.exe) 2009-03-03 08:06:51.905
*** SERVICE NAME:(xxxxxxxxxx) 2009-03-03 08:06:51.905
*** SESSION ID:(118.53238) 2009-03-03 08:06:51.905
SHDW: Failure to establish initial communication with MCP
SHDW: Deleting Data Pump job infrastructure
is it a system memory issue for data pump? my exp works well
How to fix this issue?
JIM
Edited by: user589812 on Mar 3, 2009 5:07 PM
Edited by: user589812 on Mar 3, 2009 5:22 PM

T code for sales ageing report plant wise

Is there any standard report to sales ageing report plant wise & material wise. Pls guide me with the

Hi Amit,
based on your configuration, the following standard reports can be usefull
S_ALR_87012168- Due date analysis for open items
S_ALR_87012178-Customer open items analysis by balance of overdue items
S_ALR_87012174- List of customer open items
S_ALR_87012175-Open items customer due date forecast
Hope this helps
Thanks
Akash

Include Document Date & Doc Due Date in SAP B1 Aging Details Report

We are not able to view the actual document date and document due date from the Aging details report, it should be an essential information that should be show in the aging report. It make no sense that user still have to manually drill into each document to just read the document date/ due date for their aging analysis!!!
Try to imaging that how important this information to a business, for instance, to age the invoice which due for 1 - 30 days, the document date which due for 1 days is categorise into 1-30days aged, the documents due for 30days also categorise into 1-30days aged, however it bring the different meanings to user and user need these information to take the action decision! How useful for an aging report which could not equip user with these basic information to provide user with efficiency to make effective decision???
I think it is necessary to incorporate this level of details to the SAP B1 Aging Report.

Hi Theerawat,
You may check these threads first:
Document Date
Posting / Due / Document date trouble
Re: Posting Date
Re: Difference between posting & system date in Inventory Audit Report
Thanks,
Gordon

Help reqd on no ranges issue for SD

Hi experts,
After i have loaded my customer master datas(xd01) thru lsmw,im facing a problem in the current number ranges issue...i've uploaded of 1000 records of no range started from 10000 to 11000...but in XDN1(tcode)...it shows the current number range is 11004....(i.e., if i create a new record.it starts from 11004..)
why it has been arised and how??????...how will it be resolved????
from my side....once i cancelled the recording in the middle after its loaded of 4 records. then after i ran it successfully for the balance records by the sequence way....is this the reason or something else...
waiting for ur solution/expert comments
thanks and regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

ACI - Date Range issue for Sales Details report

Similar Messages

Maybe you are looking for