Acobat 8.1 will not print a line

Acobat 8.1 will not print a line or a box on PDF, even though it is displayed on the document. Why?

The line or box still is not displayed on the printed copy.
The document has been saved with the line or box and it still will not print these items.

Similar Messages

PO will not print if line items are trash-canned

Hello,
We have an instance where we had to cancel both line items on a PO. However, the system will not allow a printout, since there are no line items. How can we get a printout to send to the vendor to confirm that both line items are cancelled? Config looks right. Deletion is a change relevant field, but the system displays a message when trying to print 'no print relevant information changed'.
Please advise.
Thank you.

Yes. We get change messages when qty or delivery date is changed, but for some reason, when you delete all line items, it doesn't generate any change. The checkbox is not checked therefore we can't print. If only 1 item is deleted, then it's OK, but if you delete all items, no printout.

Text converted to lines will not print

I have a AICS3 document with some text. The font acts a little funny, but it has been working. It shows up fine in my document, but it will not print. I conert it to lines, it shows up in my document, but it still won't print. I place it in an ID file, export it as a PDF. The text shows up in ID, but will not print. It shows up when I open the PDF in Acrobat Reader, but not in Acrobat. In both cases, the text (that has been long converted to outlines) does not print. Can anyone help? Since the text has been converted to outlines is it not just a group of compound paths? I even changed the fill with no luck. In general, I am very tired of the way we users are treated like criminals when it comes to fonts--regardless if that is the problem here. I mean, what good is a font if you can't print it? Anyway, I digress. Any ideas from anyone? I'd really like to get this thing printed.
Thanks,
MGuilfoile
G5/2500, OS 10.4.11, AICS

"Overprint fill" is useful in a situation such as 100K text printing over solid yellow. The setting will prevent the yellow from being knocked out behind the black, causing unnecessary registration problems.
White text is created by lack of ink, so preventing the background objects from being knocked out causes the white objects to disappear. Only if you were printing opaque white ink over a color, such as in screen printing, would that ever be used, and probably not even then.
Hopefully an expert will come along with a more detailed and accurate explanation.
Mike D.

HP Laserjet 4100 on network will not print

Since I’ve installed Snow Leopard, I have not been able to print with my HP Laserjet 4100.
My set-up: new 24” iMac, many hard drives and more. Two devices: HP Color Laserjet 5550 and HP Officejet J5750 are connected to the iMac through a USB Hub. Although initially scanning did not work with the J5750, I was able to make that work once additional drivers were downloaded from HP. Both work fine.
I also have an older HP Laserjet 4100 which has been my steady workhorse for years. It only has Ethernet and serial port outlets. It is connected to an AT&T 2-Wired Ethernet Hub/DSL Modem (model 2701HG-B) that is connected to the iMac.
I’ve contacted HP and Apple about this problem. None of the three people I worked with at Apple could help and the HP representative was unsure if they could help but that it would cost me $40 to find out. According to HP website, since Apple Talk no longer exists, we are required to input the IP for the device. For the 4100, the IP address is 10.0.1.100. I tried this two ways: in the “Add Printer” window under “IP,” inputted as the IPP, and inputted as the HP Jetdirect Socket (as per the HP instructions). When this is done, the printer shows up when you give a print command. However, it does not show up in the “Add Printer” window under “default” or anywhere else.
Status: If I connect the 4100 Ethernet cable directly to the back of the iMac, the “Supply” level indicates the true level of toner in the 4100. However, it will not print. If I connect the 4100 Ethernet cable to the Ethernet hub, the supply level does not show nor can I print.
Any suggestions?

I am struggling with the same problem. I have two HP 4100dtn printers on ethernet. Each has a manually assigned IP address. I can set up the printer(s) just fine in the Print & Fax Preference and Snow Leopard finds the printer just fine when I enter the IP address and chooses the correct HP Driver.
When I try to print, my print job appears in the queue as expected, than an error appears that something about a "bad command". Sorry, I'm home right now and don't have direct access to the printer so I can't give you the precise language of the message, but the gist of the message is that the system tried to connect to the printer to send the print data but the printer does not know how to respond to the command that was sent.
It's as if the firmware in the 4100 just doesn't have something in it's lexicon that Snow Leopard needs. The HP web site is no help. One page I found says the printer is supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01664444&jumpid=regR1002USEN ) and another page I found says that it is not supported (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c01879014&jumpid=regR1002USEN). The HP on line chat won't let me log in and hold a chat with HP unless I know the Serial Number of the printer, which I don't have here at home.
More to follow tomorrow.
Anyone have any ideas?

Officejet 4500 will not print from internet.

Printer will only print e-mails, will not print anything from internet. "Unspecified error, Line 2107, Char1, Code0 res://ieframe.dll/preview.js" appears when ever I try to print from internet.

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

HP Officejet Pro 8500A Plus will not print

My 2 month old printer will not print unless I open and close the print cartridge door. The printer screen says it is printing, but nothing happens. I have followed all of the steps on line, but nothing works. Anyone else have this problem?

Does your printer display "Printing..." on the control panel, but never prints?
I had such a problem. The only way I could get mine to print was to unplug the power cord and plug it back in.
I found the problem was an "expired" ink cartridge. I replaced the cartridge with a new one and the problem went away. Check your ink cartridge statuses by using the Control Panel functions. If you see one that is expired (my panel displays a yellow exclamation mark on that cartridge's icon), try replacing it and see if the problem goes away.
My problem occurred whenever the printer went into "standby" mode. I think when it wakes up it checks the cartridges and when the firmware finds an expired cartridge it locks up. Just an educated guess.
Good luck! And if this helps, please click the Kudos button for me.

HP Office Jet Pro 8610 will not print but will only fax

We have a HP Office Pro Jet 8610 and it worked fine until we hooked it up as a fax machine also on Thursday.
It used to copy, print, scan perfectly but we need a new fax machine so we went out and bought the phone cord and hooked up a fax line and telephone with built in answering to the Office Jet and the fax works , but now it will not print a document from Open Office to the printer because it tries to make a fax cover page.
I have run out of ideas can you please help?
This question was solved.
View Solution.

There are two "printer" drivers on there, to print, choose the "Officejet Pro 8610 Printer" instead of the "Officejet Pro 8610 FAX". You probably set the second one as default when the fax function is added, which is for PC fax. If you use the print function more often than fax, make the non-fax one the default printer.

MacBook Air will not print on wireless Epson printer. It says 'filter failed'

MacBook Air all of a sudden will not print on wireless Epson printer. The error message is 'filter failed'. Shut down everything and rebooted, but still not printing.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.

Photosmart 6520 e Windows 7 printer says it is connected to network, but will not print.

I've followed all suggestions in troubleshooting both from manual and on line. Shut off firewall, unplugged, plugged waited. Nothing changes. All printouts from the printer say connected, but will not print and computer detection of the printer says cannot be located. Help!!

Glad you were able to find the problem. I am sure that the Print and Scan Doctor would have come to the same conclusion Thanks for sharing what the cause was...I am sure others will benefit from it if they also have this issue.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Pdf documents will not print properly

my imac running 10.5.8 will not print some pdf documents properly. In particular sheet music will only print as horizontal and vertical lines - the symbols and notes do not print. The 'print preview' shows all the symbols and notation correctly.
This occurs in both Adobe Acrobat (v10.1.3) and Preview (v 4.2 - 469.5).
Printer in use is a HP 2600n connected via USB cable.

Seems it's not sending the Font to the Printer, or the Font has a conflict & the Printer thinks it's another Font.
Open Font Book & Validate all Fonts & check for duplicates.

Will not print files from mobile phone says it **may have** a virus- and deletes the file

My HP photosmart premium with wireless ePrint, will not print files from mobile phone says it **may have** a virus- and deletes the file?!? My Fiance has the same phone, and I used it. It completed the file??? If I text message and E-mail address, my cell phone will come up as and E-mail address... has anyone else had this issue? Is it because I texted the the file? It didn't seem to be and issue on any of the other mobile phones used.... I am out of answers.... I tried to E-mail as well...
Thanks in advance

I have nearly the same problem, the printer discards my print job even when i have entered my email address as authorised senders.
Details from my other post:
I sent 2 emails to the printer:
- one is a 3 lines of text and numbers in a GIF file sent as an attachment
- another is a jpg circuit diagram paste in a word doc sent as an attachment
both are classified as spam and refused to print. i have no email coming back saying it failed (even i have checked "Email Job Status" in ePrint Settings.
So what will this HP printer print?
How can I switch this useless spam filter off?
I have get this filter off! I need this email printing to work reliably, that is a major reason I bought this printer
Any suggestions are welcomed...
HP's slogan on the box:
"Now you can print from virtually anywhere" (but get discarded every single time!)

PDF will not print correctly from any app

I seem to keep on getting the same error everywhere I print on SL (from safari/firefox/preview etc etc)
It will usually print any lines or logos but miss all text?? I did have the dreaded adobe reader installed but have since removed it?
I am in urgent need of printing out some manuals for a class so in real trouble, help!

Where do these PDFs that do not print correctly come from? Are they downloaded from the internet or from email? Or do you create them yourself on your computer? If so, in which program?
Do some PDF files print correctly, but not others? Did you remove the dreaded Acrobat Reader before this problem developed or after? Did this problem develop only after you ungraded to a certain release of Snow Leopard or has it never worked in SL?
PDF is wonderful technology, but every so often there can be issues.
Arch

Epson 777i printer will not print

Epson 777i Printer will not print
I am using an imac with the Epson Stylus Color 777i printer,Gutenprint v5.2.3 and also the Epson 580 printer.
Yesterday the 777i stopped printing. It is in the paused mode. I have replaced the ink cartridges and have tried to
perform troubleshooting but, the printer will not respond to any commands. The green light is on, neither of the
other two lights are on.
The 580 printer is working with no problems.
I need some assistance to get the printer back on line if at all possible. I am not too tech smart, but can follow
directions well.
Fred Holmes
Lompoc

Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

P4014n Will Not Printer From Tray 2

I have a HP Laserjet p4014n that will not print from tray 2 as normal it takes between 20 -40 attemps before it prints the test page. I have replaced the feed roller but that was not the fix.This printer prints fine from tray 1 (manual feed tray)

Hi HellyBe,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Adobr Reader XI: document will not print: premium presentation paper

I've had no problems with this before today. Adobe Reader XI gives me an error message that "document will not print". I tried it in draft, plain paper, and it printed, without a problem. I switched browsers, from Google Chrome, redownloaded the document (online labels) into IE8, then tried to reprint as premuim presentation paper, matte, color. Same error message. Yet, as a draft, no problem. I've uninstalled, reinstalled, updated drivers on Epson printer (WF2530), same error message. AShould I do a system restore to two days ago, since this is the last time there was no problem? I print product labels.

Thanks Atul,
Th problem has recently been resolved when my new technician made some adjustmnents. The problem was not the fault of Acrobat. It goes back to my new high definition IPS monitor several weeks earlier. When using Windows Office 2007 I was seeeing green haloes mainly between letters such as" ll, ii, db" etc. where the vertical lines filled with green. In Adobe Bridge, the variable text in control boxes took on a red colour. My technician (at the time) sought help via the Microsoft Help site and found this was a common problem with professional high definition IPS monitors like my new one. The instructions (4 pages from the Microsoft site) said to turn off the Clear Text Type and replace the font 'SEGOE' with Tahoma. As the technician workede his way through the steps, I watched as he marked them off as he went so as to ensure the changes were correctly made. This solved the problem but it wasn't until a week later when I tried to print a PDF file that my problems with Acrobat began. The PC was taken to another technican fora "second opinion" and this man fixed the problem within a short time by changing the font back to the Windows default, SEGOE. He may have done something else but when I saw the printer dialog panel on his workbench with no other problems either, I was anxious to try it with my new monitor. No more colour fringing/haloes etc and no further problems with Acrobat However, I was waiting a little longer before informing you of the outcome-just in case it didn't work.
It seems that Microsoft may be incorrect in their 'Fix' advice as the font SEGO may well be required for Acrobat to print a PDF file?
This case may now be closed with thanks for trying to help with a problem that in the end turned out to not your fault
Bob

Acobat 8.1 will not print a line

Similar Messages

Maybe you are looking for