Acrobat X Upgrade API menus no longer work.

I just recently upgraded to the New Acrobat X. I have created a pluggin that has simple annotations to be placed in a document.
However once I add the toolbar button to Quick Tools. The Toolbar Items are no longer visible. Any suggestions on fixing them in the API?
See Video... http://screencast.com/t/kZUfGNQ3M
What changed?
What do I need to look at?

Known bug - will be fixed in a future update. Sorry!

Similar Messages

Adobe Acrobat 9 complains that licensing no longer works and repair doesn't help? Ideas?

Adobe Acrobat 9 complains that licensing no longer works and repair doesn't help. Ideas?

Problem ocurred on Windows XP, Acrobat 9 Standard. Believe error was 138:4 - licensing error
Solution using Windows XP, Administrative tools under Control Panel
Control Panel – Select
Administrative Tools – Double Click
Services – Double Click
FLEXnet Licensing Service (Right click and select Properties)
General Tab: Startup Type – change “Disabled” -> “Automatic” Press Apply.
Recovery Tab: 1st, 2nd, and Subsequent Failures – change “Take No Action” -> “Restart the Service” Press Apply
General Tab: Service Status – press “Start Button” Press Apply
Services window – check FLEXnet Licensing status = “Started”
Verify fix by starting Adobe Acrobat 9 (rebooting not required).

All help menus no longer work after installing Mavericks

After installing Mavericks on my iMac all help menus no longer work. You still get the drop down box which contains the search window and other choices, but if you try clicking on them the screen just flashes or you might get a box that says " safari help is not available". It does this system wide, doesn't matter what application your in. My internet works fine but for some reason in Mavericks the help menus are not accessing this information. Anyone else have this problem? Or an answer?
Thank you!

Finally, a quick restart of the mac and all help menus are working again.

What do you do when acrobat 8 standards serial number no longer works on your computer when downloading?

what do you do when acrobat 8 standards serial number no longer works on your computer when downloading?

Your iPad can backup to the computer or it can backup to iCloud. It cannot do both.
http://support.apple.com/kb/ht1766

10.7.2 upgrade and Exchange no longer works

Title says it all. I upgraded to OS 10.7.2 this morning and since then, I am unable to connect to my Exchange account at work. And yes, I'm sure it's my Mac that's the problem. The servers at work are fine. My iPhone still plays well with Exchange, but my Mac Mail app won't work with the Exchange account.
I've deleted the entire account in the Mail App and set it up agian, but no luck.
This conoincided excatly with the 10.7.2 upgrade.
Anyone able to help?

Yes and no with Lion OS.
I used to be able to mess with the icon size slider and this would sometimes make the preview thumbnail appear, but now since the update that trick no longer works and I just get the generic .RAW icon for all my RAW files.
In finder, view options: "show icon preview" is checked and I messed with all the other settings as well with no solution.
I never had this issue until I bought this new iMAC with Lion. My other iMacs with Snow Leopard work fine and display RAW preview thumbnails with no issues.

Drop down menus no longer work on many sites after upgrade to ios 5.

On my iPad and iPhone I'm having trouble on a number of sites with drop down menus. When you click on the menu, it immediately selects the default option instead of allowing the menu to drop and then select one. Any way to fix this?
Thanks,
Bill

Obviously you are referring to web sites using Safari???? If it happens on both devices - iPad and iPhone - that seems rather odd to me.
Try all of the basics .... Resetting the iPad may be your first best bet ....
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Got to Settings>Safari>Clear Cookies and Data

E3200 - do not upgrade firmware - storage no longer works and router ping goes to 1000 ms

I upgraded my firmware because I was having a lot of stability problems with the router.
Unfortunately it got worse with the firmware upgrade. There were two symptoms:
1. the router no longer recognizes the usb attached hard drive / storage
2. the throughput on the router and ping statistics are terrible unless you unplug the usb attached device (which it can't recognize any more anyway).
If I were able to roll back the firmware I definitely would.
I have had around 5 routers over the past 10 years and this is definitely the worst. Constantly needs restarting, and doesn't work as advertised.

First of all, you mentioned in your post that you have already upgraded the firmware. So after firmware upgrade did you reset the gateway? It is recommended to reset the gateway once. Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.
After reset, reconfigure the router and then check the connectivity status of the storage..

Using VPN to access remote servers; copying files to desktop since "upgrading" to Mavericks no longer works. Can anyone help please?

Hi everyone,
I work remotely using Cisco AnyConnect (company provided) to access the company servers. Until "upgrading" to Mavericks I was able to copy files directly to my desktop – from either the servers themselves, from within Bridge, and/or by using the finder - you get the idea. Now I can only copy the files by opening them while still on the server using the native app (in my case mainly InDesign/Photoshop/Illustrator files) and saving them to my desktop that way.
I'm a designer, I use a lot of files for my specific job every day and these files are often pretty large and doing it this way is time-consuming and really frustrating seeing as I had no such issues with the previous OS. It's not a total nightmare (yet) like some of things some of you are dealing with but I've spent more time restarting, freezing and trying to fix issues than I have actually using my darned machine. I have no choice but to access my work this way; I'm part of a much larger team and we all work on these files off and on during the day so I'm constantly needing to copy files and make sure I'm working on the most current version. Working off the server isn't an option as the speed decreases considerably... making the slightest task cringingly slow. As in 25 minutes for a PDF to be created slow.
I've been used to my system running smoothly, without issues and fast so this upgrade is turning into a bit of a nightmare. Before I throw in the towel and try and downgrade, does anyone have any ideas? My technical knowledge where these things are concerned isn't beginner but I'm no expert and I'm stumped. I just don't know where to start and I'm afraid of screwing something else up during the process of trying to fix this (so far) one issue and creating a snowball effect.
I'm using a 27" iMac (late model 2012 purchased in March 2013) with a second Viewsonic monitor attached. I have a Cintiq 22HD hooked up (but not on all the time) and a Wacom tablet in use. I currently use both CS5 (work hasn't upgraded to CC yet) and Adobe CC (for personal use) on my system.
Any help/ideas would be greatly appreciated!
Thanks!
G.

Hi,
By default, the Remote Desktop (RD) Gateway component that encapsulates RDP in HTTPS packets listens on port 443 (for TCP) and port 3391 (for UDP). After you changed the ports in Transport Settings tab, please make sure that you have opened the custom ports
you selected in Windows Firewall.
In addition, since you have mentioned the registry key, would you please share the entire path?
It seems that you need to manually update the gateway in the RDP file with the port. Have you created an .rdp file? You can also refer to the link below:
Create an .rdp file
Best regards,
Susie

Upgraded router VPN no longer working - LCP: timeout sending Config-Request

I recently upgraded my small office router from a Linksys WRT54G to a Linksys WRT610N. I duplicated all of the port forwarding configs from my previous router, but everytime I try to connect to my server I get the following error:
Could not negotiate a connection with the remote PPP server. Please verify your settings and try again.
The ports I have forwarded to my server are the following:
1701 UDP
500 UDP
1723 TCP
4500 UDP
While I am connecting I have been watching the log from Server Admin, and this is what I see:
2008-07-11 06:09:35 PDT Incoming call... Address given to client = 192.168.1.63
Fri Jul 11 06:09:35 2008 : Directory Services Authentication plugin initialized
Fri Jul 11 06:09:35 2008 : Directory Services Authorization plugin initialized
Fri Jul 11 06:09:35 2008 : PPTP incoming call in progress from '76.172.xxx.xxx'...
Fri Jul 11 06:09:35 2008 : PPTP connection established.
Fri Jul 11 06:09:35 2008 : using link 0
Fri Jul 11 06:09:35 2008 : Using interface ppp0
Fri Jul 11 06:09:35 2008 : Connect: ppp0 <--> socket[34:17]
Fri Jul 11 06:09:35 2008 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xef7517xx> <pcomp> <accomp>]
Fri Jul 11 06:10:05 2008 : LCP: timeout sending Config-Requests
Fri Jul 11 06:10:05 2008 : Connection terminated.
Fri Jul 11 06:10:05 2008 : PPTP disconnecting...
Fri Jul 11 06:10:05 2008 : PPTP disconnected
2008-07-11 06:10:05 PDT --> Client with address = 192.168.1.63 has hungup
I am still using 10.5.3. This may be very obvious to someone, but I'd appreciate any help.
Thanks!
Scott

I am having sever issues with routers vs. VPN and I am hoping someone here can tell me how they got PPTP and L2TP working through the Apple Airport Extreme.
Basically, I used to have a cheap, old, but perfectly working Linksys router. I opened ports for PPTP and L2TP pass through and VPN worked fine. I decided to upgrade the router because I wanted something with basic firewall functionality...
I tried two new linksys products and gave up in disgust. Then I thought I had a brainwave and ordered the Apple Extreme Base Station. Well, this is almost as hopeless.
I can get PPTP to connect now but the remote clients can't connect to the AFP server. L2TP simply won't work. I have 1701, 500, 1723 and 4500 ports forwarded to my server so I don't know what I am doing wrong.
Also, I see on Apple's Server page that the Server will set up the Apple Extreme Base Station automatically??? How does this work?
Lastly, Do I want to enable NAT port mapping protocol?
Thank you,
Gareth

Yosemite upgrade: function keys no longer work, no keyboard lights and have to sign in twice after sleep mode. Anybody else having these problems?

Hi,
Since I did the Yosemite 'upgrade' last week I have been having problems with my MacBook Pro that never happened before. The most frustrating problems involve my keyboard which doesn't light up (checked my settings and they are correct) and the top row of function keys don't do anything so I can't adjust the volume, brightness, etc. Then if my screen goes into sleep mode, when I wake it back up I have to sign back in twice - I never had to sign in at all after sleep mode before.
I'm finding that in order to get it working properly I am having to completely shut down and start up again but when the keyboard problems are happening I can't get anything on the apple dropdown to work either (i.e. shut down, restart, etc) so I can only shut down by pressing and holding the on/off button.
I've never had problems with my Macbook before and feel like Apple have completely ruined it in one update! I've had a look through other posts on here but can't find anybody else having these problems so I would be really grateful if anyone could help me and offer me some advice on how to sort it out.
Thanks!

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Captivate 6 Upgrade, Master Widget No Longer Working?

Hello,
The last time I was on the forums, I was trying to find a way to quiz our learners using click boxes. We had two click boxes on one slide, the learner could choose either and it would be correct. After a lot of discussion and help, I finally bought the Interactive Master Widget. This has been extremely helpful, and I have had no problems with it, until now.
I recently did the upgrade to Captivate 6 (and I am a subscriber so I did the newest Subscription Upgrade), and the Master Widget slides are "freezing." I ran the course all the way through with no problems, but when I got to the slide with the Master Widget, I cannot click either of the click boxes, or in any area that will allow me to advance.
I have several courses that depend on the Master Widget, and they are all behaving similarly.
Any thoughts and suggestions would be greatly appreciated!
Thanks,
Jessica

Captivate 6.1 Version has changed something in the underlying code that seems to have broken ALL of the current Infosemantics interactive widgets, even though those same widgets were compatible with Capitvate 6.0 or 6.01.
We have notified Adobe about this issue and are waiting to hear back from them. At this time Infosemantics does not have a solution.

7.0.2 on 4S: since OS upgrade, speaker function no longer works (phone keypad or voicemail).

Contacted ATT support: did reset. Problem remains. ATT support tech believes this is an OS bug. Anyone else having this problem? Ideas or fixes?

Hello summitlang,
Thank you for the details of the issue you are experiencing with the speaker on your iPhone. I recommend following the steps in the article below for an issue like this:
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Siri no longer works after IOS8 update. Help.

Is anyone having a problem with Siri after the latest iOS8 upgrade? Mine no longer works. It's like she can no longer hear me. I'm running 8.0.2.

Hey Chadfromclemmons,
Thanks for the question. After reviewing your post, it sounds like Siri is having trouble hearing you. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Siri
Thanks for using Apple Support Communities.
Have a nice day,
Mario

My digital signatures no longer work the credential selected for signing is invalid

Adobe Acrobat Pro My digital signatures no longer work I get the error of "the credential selected for signing is invalid" when I try to add my signature
Even my old signatures on all my previous signed documents from years ago are broken now. How do I reset this and get it all up and running again? Ive looked and cant find a solution to this.
HELP!!!

I have the same problem, very frustrating to suddenly have digital signatures fail!

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac os

I have Acrobat 7.0 updated to 7.1.4 which surprising no longer works after upgrading my mac operating system to OS 10.8.5 (mountain lion), and gives an err message that system no longer supports PPc applications. I guess Acrobat 7 is a PPc application and wanted to know if there is any work-forward here to be able to keep using this product? I didn't see this coming.

There may be parts of it that work if the MAC is anything like the PC. I have been able to get AA 7 to partially work on a Win7, 64-bit machine, but several work-arounds are required. The biggest one is the installation of a PS print driver and such. So, can you open Acrobat and/or Distiller? Do they seem to function? If so, there may be some workarounds. Otherwise you probably need to purchase AA XI. Actually, I would recommend purchasing the newer version anyway -- just trying to give you a picture of what might be possible.
When you say it no longer works it is not clear what you mean. You may need to clarify and also indicated if you have tried repairing the installation and such. I can't say a lot more since I am not really familiar with the MAC.

Acrobat X Upgrade API menus no longer work.

Similar Messages

Maybe you are looking for