Actication Data for reporting in InfoCibe

Hi!
I'm new SAP BI Consultant and I need some helps according to InfoCube loading.
I load coorectly my InfoCube but I don't know how to activate my requests for reporting in BW.
We don't have a press bouton 'Activate' like when we want to activate data for reporting in DSO.
Please, does somebody tell me the process?
Thks!

Hi Gaudenzio ,
Welcome to BI. Activation is only used in standard DSOs which have 3 tables :new ,change log and active. When data is loaded into a DSO, it is loaded into the new table. Activation is performed to move this data to the change log and active tables.
You can refer the below link for more info.
[http://help.sap.com/saphelp_nw70/helpdata/en/43/5fc0680a876b7de10000000a422035/frameset.htm]
You do not require activation for infocubes or write optimsed DSOs.
Data is automatically available for reporting when you load a request into an infocube.
Hope this helps.
Regards.

Similar Messages

Sharepoint Web Analytics no data for reports

Hi all,
I would like some assistance in troubleshooting the web analytic problem I am experiencing with one of my farms.
My web analytics reports stopped beeing generated recently and the uls logs have not been helpfull at this point.
I have checked the following:
Verified that the Web Analytics Data Processing Service and Web Analytics Web Service are started on the server.
Made sure web analytics service application is started.
.USAGE files are being generated on the WFE
Noticed that the SharePoint Logging database (LoggingDB) DOES not contains any information.
I think this is where my problem resides, I have tried to create a new Web Analytics services application, with a new staging and logging database, but no luck.
I have also tried to create a new wss_logging db, still no luck.
I have made sure that the account that runs web analytics has the correct SQL db right on the logging db. still no luck.
Your assistance is highly appreciated.
Clifford - South Africa

Generally it take 24 hrs to generate analytics data.
Check if below jobs are active:
Diagnostic Data Provider: Event Log
Diagnostic Data Provider: Performance Counters – Database Servers
Diagnostic Data Provider: Performance Counters – Web Front Ends
Microsoft SharePoint Foundation Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
http://pinchii.com/home/2012/03/site-web-analytics-reports-show-no-data-in-sharepoint-2010/
Also try steps from:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0728b722-29e1-4de3-87ee-45ac40242ccf/web-analytics-no-data-for-sites?forum=sharepointadminprevious

Previous month end data for report

Hi expert,
I have to calculate previous month end data for my report.
let say if user select 15 oct then he should be able to see 30 sept data.
I have calander prompt.
Thanks,

Hi,
Use presentation variable in date prompt.
Apply sql filter(covert to sql) on report as date_column= TIMESTAMPADD(SQL_TSI_DAY,-DAYOFMONTH(date 'presntation_variable'),date 'presentation_variable')
Refer : How to get LAST_DAY in obiee
Regards,
Srikanth

Unable to collect NIC data for reporting with MIB-II module

Hi all,
Here we have SunMC 3.6.1 set up with almost all the available modules, including the complete "MIB-II Instrumentation" one. We also have the "Performance Reporting Manager" feature, and want to use it to generate a hole bunch of performance reports for our Sun servers.
The problem I am facing is that I try to collect data through the "MIB-II Instrumentation module". I browse into "Interfaces Group", and there I can see all the NICs I have on the system. I would like to record the "If In Octets" and the "If Out Octets" fields. I right-click on these fields, I select the "Attribute Editor", then I click on the "History" Tab, and I choose to save the history on the disk, at each 300 seconds, and the file type is "circular".
Even after waiting for 24 hours, I don't have access to data that should be recorded. If the Performance Report Manager application, when I list the "data availability" for the server where I activated the collect, all I see is the "Kernel Reader" module collects I already activated: I don't see any "MIB-II Instrumentation" module there...
On the "Server details" window, when I go the the "Module management" tab, if I choose "MIB-II Instrumentation" module, it is charged and activated. However, when I click on the "Rules" button, the only ones appearing are the following:
IF Oper Status (1)   rCompare   -   -   -
IF Oper Status (2)   rCompare   -   -   -
IF Oper Status (3)   rCompare   -   -   -
IF Oper Status (4)   rCompare   -   -   -and I find it to be exactly the same for the "MIB-II (Simple)" module... Could it be the reason why I cannot collect the "IF In Octets" and "IF Out Octets" fields?
Is there a way I can collect more relevant statistics about network usage with SunMC, using the "MIB-II Instrumentation" module, or something else within SunMC?
Thanks in advance!!
Ben

Hi Ben,
Is there a way I can collect more relevant statistics
about network usage with SunMC, using the "MIB-II
Instrumentation" module, or something else within
SunMC?It sounds like a general problem with PRM: though if the Data Availability tab shows it's pulling Kernel Reader data every hour, then it should show your MIB-II info as well.
Even then octet counts aren't terribly useful: they're just big numbers that get bigger: you really need to see rates over time to get an idea of what your network is doing.
You could try the SystemMonitor module that's part of PlusPack:
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-network-h.html
It shows MB/minute rates for each interface. If that's the type of info you need then you can enable those numbers for PRM or Reporter instead.
Regards,
[email protected]
http://www.HalcyonInc.com

Error while reading data for reporting

Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
Sandy

Hi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy

Data for Report Painter report

Hi Gurus,
I have a report painter report S_ALR_87013019 . This uses the
Library 602 (gr23), report - 60BU-001 (GRR3).
Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
Thanks,
Regards,
Raman

Hi
The As on Date balance cant be cumulated...
Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
The same Key figure which shows values in comp code currency can be used
br, Ajay M

Sliding window sanario in PTF vs Availability of recently loaded data in the staging table for reporting purpose

Hello everybody, I am a SQL server DBA and I am planning to implement table partitioning on some of our large tables in our data warehouse. I
am thinking to design it using the sliding window scenario. I do have one concern though; I think the staging tables we use for new data loading and for switching out the old partition are going to be non-partitioned, right?? Well, I don't have an issue with
the second staging table that is used for switching out the old partition. My concern is on the first staging table that we use it for switch in purpose, since this table is non-partitioned and holding the new data, HOW ARE WE GOING TO USE/access THIS DATA
FOR REPORTING PURPOSE before we switch in to our target partitioned table????? say, this staging table is holding a one month worth of data and we will be switching it at the end of the month. Correct me if I am wrong okay, one way I can think of accessing
this non-portioned staging table is by creating views, which we don’t want to change our codes.
Do you guys share us your thoughts, experiences???
We really appreciate your help.

Hi BG516,
According to your description, you need to implement table partitioning on some of our large tables in our data warehouse, the problem is that you need the partition table only hold a month data, please correct me if I have anything misunderstanding.
In this case, you can create non-partitioned table, import the records which age is more than one month into the new created table. Leave the records which age is less than one month on the table in your data warehouse Then you need to create job to
copy the data from partition table into non-partitioned table at the last day of each month. In this case, the partition table only contain the data for current month. Please refer to the link below to see the details.
http://blog.sqlauthority.com/2007/08/15/sql-server-insert-data-from-one-table-to-another-table-insert-into-select-select-into-table/
https://msdn.microsoft.com/en-us/library/ms190268.aspx?f=255&MSPPError=-2147217396
If this is not what you want, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Excel Add-in for report buider 3.0

Hi Guys,
I am looking forward to use Report builder 3.0 inside excel as an add-in. I don't want do develop in a stand alone version as I need to refresh the report in excel and change the data dynamically. I am doing this because I wanted to give cell references
to other sheets in the excel file as well.
I know pivot table will do. But I was not able to achieve the desire format in what I want actually.
please help.
Thanks.

I am looking forward to use Report builder 3.0 inside excel as an add-in.
Hello,
There is no functional relation between Report Builder and Excel, therefore there is no such an addin.
If PowerPivot is not suitable for you, then maybe an option could be to query (link) the required data from your data source directly in Excel and then to use that as data for reports/charts etc.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Simultaneous data activation in cube - request for reporting available

Hi,
I'm on BW 3.5.
I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
When I load all the data in a single load, it takes 10 hours to load. When I break it up into 4 loads it takes 3 hours.
My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
Is it possible to get all 4 requests to activate simultaneously?
I have tried adding an aggregate to the cube, no good.
I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
Does anyone have a solution?
Many thanks,
Paul White

Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....

"Request for Reporting available " is not displayed after loading the data.

Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyee

Hi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy.

Vendor ageing report data for all doc type needed(urgent)

hello everyone
once again i need ur help guys.
in the vendor ageing report i am getting data for only one document type and not of other.
ex- see i have two documents type-
1.KD 2. EJ
so i am getting data for document type KD only.
so how to get the data of document type EJ along with KD.
below is my code .
so tell what modifications i have to made .
*& Report Z_VENDOR AGEING                                                    *
*& in this repoet I am calculating the vendor ageing
    which is depending on formula
    AGEING = Current Date(or any date entered by user) Bline Date(BSIK-ZFBDT)                                                                 *
REPORT z_vendor NO STANDARD PAGE HEADING
                  LINE-SIZE 200
                  LINE-COUNT 65(3).
TABLES : bsik.
DATA : BEGIN OF t_out OCCURS 0,
       bukrs LIKE bsik-bukrs,
       saknr LIKE bsik-saknr,
       bldat LIKE bsik-bldat,
       wrbtr LIKE bsik-wrbtr,
       lifnr LIKE bsik-lifnr,
       zfbdt like bsik-zfbdt,
       zbd1t like bsik-zbd1t,
       ageing type i,
       END OF t_out.
parameters : p_date1 type d.
SELECT-OPTIONS : s_bukrs FOR bsik-bukrs,
                 s_saknr FOR bsik-saknr,
                 s_lifnr FOR bsik-lifnr.
SELECT bukrs saknr bldat wrbtr lifnr zfbdt zbd1t
       FROM bsik
       INTO TABLE t_out
       WHERE saknr IN s_saknr
       AND bukrs IN s_bukrs
       AND lifnr IN s_lifnr.
Loop at t_out.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
    i_datum_bis                   = p_date1
    i_datum_von                   = t_out-zfbdt
I_KZ_EXCL_VON                 = '0'
I_KZ_INCL_BIS                 = '0'
I_KZ_ULT_BIS                  = ' '
I_KZ_ULT_VON                  = ' '
I_STGMETH                     = '0'
I_SZBMETH                     = '1'
IMPORTING
   E_TAGE                        = t_out-ageing
EXCEPTIONS
DAYS_METHOD_NOT_DEFINED       = 1
OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Modify t_out.
Clear t_out.
Endloop.
LOOP AT T_OUT.
IF T_OUT-SHKZG = H.
T_OUT-WRBTR = T_OUT-WRBTR * -1.
T_OUT-WRBTR = T_OUT-DMBTR * -1.
ENDIF.
DATA: TOTAL(16) TYPE P DECIMALS 2.
TOTAL = TOTAL + T_OUT-DMBTR.
Endloop.
LOOP AT t_out.
WRITE : / t_out-saknr,
            t_out-lifnr,
            t_out-wrbtr,
            t_out-zfbdt,
            T_OUT-DMBTR,
            t_out-ageing.
AT LAST.
WRITE:/ TOTAL.
CLEAR TOTAL.
ENDAT.
ENDLOOP.
Message was edited by: sanjeev singh

Sanjeev,
Can you tell what is document type EJ representing...Secondly, if you check couple of documents of EJ type and check if data is available as per you WHERE clause filters.
Regards
Anurag

No data for daily report sent from my PC

Since a clean install of Windows 7 Ultimate on my PC, no data is being sent to the Cisco server from my PC. Previously I was running the RC version of Windows 7 Ultimate on this PC, with the same router and configuration, and no problems in being able to access a full daily report. I was using Outpost Security Suite Pro, which allowed the data to be sent, but am now using the native Windows firewall, configured to allow NM outward communications.
I asked Support to assist with configuring the Windows firewall, but they were unable to assist, as they did not know how to do this- I would have thought that as NM is Windows 7-compatible, this information would have been available to them.
My netbook is running Windows 7 Ultimate RC, with OUtpost Security Suite Pro, and does send the data for the daily report, when using my home wireless network and the same router, so I suspect that the Windows 7 firewall is causing the problem with the PC.
Can anyone advise me on the specifics of configuring the Windows 7 firewall to allow NM to send the necessary data so that I can get the daily report?
Running Network Magic version -5.5..9195.0-Pure. ADSL-2 connection; Netcomm Router NB6Plus4W;PC connection to router wired; PCI Adaptor card; VIPRE Antivirus and Antispware (disabling this made no difference)

ambergris77 wrote:
Since a clean install of Windows 7 Ultimate on my PC, no data is being sent to the Cisco server from my PC. Previously I was running the RC version of Windows 7 Ultimate on this PC, with the same router and configuration, and no problems in being able to access a full daily report. I was using Outpost Security Suite Pro, which allowed the data to be sent, but am now using the native Windows firewall, configured to allow NM outward communications.
I asked Support to assist with configuring the Windows firewall, but they were unable to assist, as they did not know how to do this- I would have thought that as NM is Windows 7-compatible, this information would have been available to them.
My netbook is running Windows 7 Ultimate RC, with OUtpost Security Suite Pro, and does send the data for the daily report, when using my home wireless network and the same router, so I suspect that the Windows 7 firewall is causing the problem with the PC.
Can anyone advise me on the specifics of configuring the Windows 7 firewall to allow NM to send the necessary data so that I can get the daily report?
Running Network Magic version -5.5..9195.0-Pure. ADSL-2 connection; Netcomm Router NB6Plus4W;PC connection to router wired; PCI Adaptor card; VIPRE Antivirus and Antispware (disabling this made no difference)
Hi ambergris77,
First only one Software can be turned on within the operating system, otherwise you have problems. Also Network Magic needs Full Access, not just Outward Access.
thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

Report to show data for specific MD

Hello,
I am racking my brain thinking of a way to do this...
I have some specific masterdata for example Product 1,2,3...10 and i also have a cube where any Actual & target sales are recorded
I need a way of producing a report whereby the report shows ALL products and any data relevant from the cube...
ie if there is a product where there is no data for actuals or targets then the report will still show a line but with blanks in the KF.
(right now, if there are no actuals or targets, that product is ommited from the report, I need to be able to see that product and the fact that there is no data for it in the cube)
any ideas?
thanks
BW_ER

Hi,
There are multiple ways of achieving what you want.
1) You can do as proposed and create an infoset and then you can use and outer join on the master data. This way all master data records are displayed independently of whether they have any transactions in the infocube when you create a query
2) You can create a multiprovider on your master data and your infocube and then in the mapping of the fields, specify that you want the e.g. 0MATERIAL to come from your master data
Hth,
Jacob

AP Aging report - key date for user entry

Hi All,
We have a requirement to calculate aging buckets like 0-30,31-60,61-90...etc.
I know the key date for this report is created on net due date in SAP standard report.
In standard SAP report , key date is always a system date(SY-DATUM).
What we need for this report is , we need to get all the invoices which are outstanding as of that date(the date which user enters).
If user enters today's date(08/28/07) , he should get all the invoices outstanding till that date in aging buckets and if user enters some date in the past like 07/26/07, he should get all the invoices outstanding as of that date.
Can someone Pls tell me if aging buckets are calculated based on a user entry ?
Regards,
Kumar

Hi Voodi,
Aging in the standard report is being calculated like below...
1.For open items
Posting date<key date
Item status = O
2.Posting date < keydate and clearing date > key date and net due date with offsets on keydate ( key date + 1 - keydate+30 --- for 1-30 days) like wise for all aging buckets.
in this scenarion , key date is always system date ie today's date.
But user wants to get all the invoices based on his user entry...
is this possible with the same standard key date variable or do we need implement any other logic???
Regards,
Kumar

How to display "No data for yesterday" in a scheduled report on Webi

Hi All,
In Webi, I am working on scheduling reports and was asked by a user if the scheduled report on Webi can display "No data for yesterday/no orders for yesterday" when the report returns no data due to No Orders submitted or a business holiday. This sounded a good idea to me as this report only looks for previous days orders/sales and there are many instances when the report will return blank page due to no activity the day before.
Can anyone please guide me on the possibility of achieving something like this on Webi using Bex query.
Any help will be appreciated .
Thanks
Gaurav

Hi,
You can format the blocks in the report as "Hide When Empty" or "Hide When [some formula]" and have a blank cell added behind these blocks with a text "No Data for Yesterday"
Need to set the relative position and ordering for this accordingly.

Actication Data for reporting in InfoCibe

Similar Messages

Maybe you are looking for