Simultaneous data activation in cube - request for reporting available
Hi,
I'm on BW 3.5.
I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
When I load all the data in a single load, it takes 10 hours to load. When I break it up into 4 loads it takes 3 hours.
My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
Is it possible to get all 4 requests to activate simultaneously?
I have tried adding an aggregate to the cube, no good.
I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
Does anyone have a solution?
Many thanks,
Paul White
Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani....
Similar Messages
-
(Request for reporting available) is not coming in Cube
Hi All,
I have Cube & DSO.
I added fields in DSO & Cube.
Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
thanks in advance,
Kiran.Hi ....
Have you done the Roll up ?
Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
Regards,
Debjani.... -
"Request for Reporting available " is not displayed after loading the data.
Hi
A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
Please advise on this.
Regards
loyeeHi,
What is the status in Monitor. If it is ok, go to manage of the infocube,
in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
Click the first check box, (Set Quality status to OK). If you aggregates, choose second box.
Hope this helps.
Regards,
Rama Murthy. -
Request for reporting available icon is missing !
Hi,
I have an infocube which has been uploaded by ODS and the data load was successful.
But--
The request for reporting available Icon is missing in the request.
Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
Why i am not seeing the icon?
RajHi Raj,
If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
otherwise it should appear...
if you are talking abt ODS then you might have missed the step to activate data in ods.
hope this helps..
cheer's
HVR. -
Request for reporting available after rollup. Why not before?
Hi,
In infocubes with aggregates, a dataload is not available for reporting until you roll-up the aggregates. This is very unwanted behaviour and we'd like to have the loads available at all times, with or without a rolled up aggregate. All our aggregates are rolled up in the same process chain block after all loads are done. This means that data will not be available for reporting until all loads have finished, something our customers complain about.
Because parallel rollup jobs collide, rolling up up after every infopackage would make our loadschedule very unflexible (difficult to plan parallel processes).
Is this possible (by changing a setting somewhere) to change this and make load available for reporting at all times, or is this one of SAP's standard programming decisions without any workarounds?
Cheers,
EduardAggregates data is maintained in aggregate tables.
Unless, you roll it up after every data load, the aggregate data wont be correct and it wont be consistent with the data in the cube.
YES< the roll up job will not be complete unless the loading job is compete.
One suggestion is to review the process chain jobs and see if you can reshuffle the jobs.
But aggregate roll up has to happen after data loading job of that cube on which aggregate is built .
Ravi Thothadri -
Dear Apple support!
My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the apple id ; I had call my friend to ask about that but it's been a long time he couldn't remember the original ID that he had used. so now, could you be able to unlock the phone that i can continues to use this phone. Thank you so much, and I appreciate you all
<Personal Information Edited by Host>All Apple support contact information is on the web site - http://www.apple.com/contact/
If your friend needs to recover his AppleID used for that iCloud account, then follow the directions here:
http://support.apple.com/kb/HT5787 -
Use of virtual cube 0FIGL_V10 for reporting on Financal Statements
Dear all,
I am new to the GL reporting and I have a question about the usage of the virtual cube for reporting on Financial Statements.
On the content site I see that you can report your Balance Sheet based on the infocube 0FIGL_C10, where you can use the infoobject 0GLACCOUNT to display the balances.
I also installed the Virtual Cube 0FIGL_V10, which has the infoobject 0GLACCEXT to show the Financial Statement Item hierarchy.
My questions are:
- to create a Balance Sheet Report, is it advisable to use the content query 0FIGL_C10_Q001?
If I run that query now, it is showing the data on seperate G/L accounts, where I would like to see a hierarchy display.
For reporting on the capital expenditure however the requirement is that some G/L acoounts don't have to be taken into account. How can I exclude those then from the hierarchy for that report?
- to create the P&L, advice on the content site is to use the virtual cube because you have the Financial Statement Item hierarchy available there and you can report on specific financial statements.
Can anyone tell me the added value of using the Virtual Cube? Or can I skip it and just add the Financial Statement Item hierarchy in the 0FIGL_C10 cube and create a report where I select the nodes of the hierarchy that are only applicable for the P&L? Will that corrupt the figures or have any other effect?
Thanks in advance for the help!Hi Sundar,
As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
Hope it helps..
***Assign Points***
Thanks,
Gattu -
Hello everybody, I am a SQL server DBA and I am planning to implement table partitioning on some of our large tables in our data warehouse. I
am thinking to design it using the sliding window scenario. I do have one concern though; I think the staging tables we use for new data loading and for switching out the old partition are going to be non-partitioned, right?? Well, I don't have an issue with
the second staging table that is used for switching out the old partition. My concern is on the first staging table that we use it for switch in purpose, since this table is non-partitioned and holding the new data, HOW ARE WE GOING TO USE/access THIS DATA
FOR REPORTING PURPOSE before we switch in to our target partitioned table????? say, this staging table is holding a one month worth of data and we will be switching it at the end of the month. Correct me if I am wrong okay, one way I can think of accessing
this non-portioned staging table is by creating views, which we don’t want to change our codes.
Do you guys share us your thoughts, experiences???
We really appreciate your help.Hi BG516,
According to your description, you need to implement table partitioning on some of our large tables in our data warehouse, the problem is that you need the partition table only hold a month data, please correct me if I have anything misunderstanding.
In this case, you can create non-partitioned table, import the records which age is more than one month into the new created table. Leave the records which age is less than one month on the table in your data warehouse Then you need to create job to
copy the data from partition table into non-partitioned table at the last day of each month. In this case, the partition table only contain the data for current month. Please refer to the link below to see the details.
http://blog.sqlauthority.com/2007/08/15/sql-server-insert-data-from-one-table-to-another-table-insert-into-select-select-into-table/
https://msdn.microsoft.com/en-us/library/ms190268.aspx?f=255&MSPPError=-2147217396
If this is not what you want, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support -
Is it possible to send a request for report pagination?
Hi,
I have a page with 3 regions.
Only one of these regions is displayed depending on a special request.
This works fine as long as we don't push the select list for report pagination.
Do we have any possiblities to send a request when we select another rowrange from the pagination select list?
At the moment we don't get a request after selecting a new pagination.
The result is that after the pagination there is no region displayed.
Thanks in advance
UlrikeUlrike - For reasons like this, it's best not to use REQUEST to control page rendering behavior. Passing an item value so that it stays in session state gives you more flexibility, e.g., P1_SHOW_REPORT:YES.
Scott -
Dear Experts,
I have built a query/ report (in Development System) in Bex. I need to move that report to test system. How to do that? I haven't got any transport request for that. Do i need to create a transport request for that? Could you give me step by step what to do and how to do, please?
Thanks,
RiyaRiya,
Please don't ask the same question in different threads, esp as you have not closed out a lot of your previous threads:
urget please moving to testing system -
UCCX 10.1 - Linked Server - Copying HR data to external SQL Server for reporting
I have a customer that is migrating from UCCX 7 to UCCX 10. They currently have a 2008 SQL Server R2 that they use for custom reports. They have a package that runs nightly to copy relevant data from UCCX 7 to the their server and then run reports daily against that database. Pretty easy when everything is in MS SQL. My plan was to set up a linked server in SQL 2008 to the UCCX server. This would allow me to easily run a query against Informix and move the data over as before. However, I am having problems adding the linked server.
I have installed the Informix drivers (both 32 and 64 bit) during the troubleshooting.
The DSN is created and connects to UCCX just fine.
When I attempt to add the linked server using 64 bit driver DSN I get the following:
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "UCCX101".
OLE DB provider "MSDASQL" for linked server "UCCX101" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "UCCX101" returned message "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
OLE DB provider "MSDASQL" for linked server "UCCX101" returned message "[Informix][Informix ODBC Driver][-11302] Insufficient Connection information was supplied". (.Net SqlClient Data Provider)
When I attempt to add the linked server using the 32 bit driver DSN I get the following:
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "32UCCX101".
OLE DB provider "MSDASQL" for linked server "32UCCX101" returned message "[Microsoft][ODBC Driver Manager] The specified DSN contains an architecture mismatch between the Driver and Application". (Microsoft SQL Server, Error: 7303)
It appears to me there is a 32/64 bit conflict no matter route I go.
Can anyone tell me what I am missing?
Is there a better approach to take to achieve the ultimate goal?
Any suggestions are greatly appreciated.
TIA
JohnI have created linked servers on an SQL2K box that points back to CCX. First off, you have to set the password for the UCCX HR user to some known value.
exec sp_dropserver 'fonccx9_01', 'droplogins'
EXEC sp_addlinkedserver
@server='fonccx9_01', -- Name of the Linked Server, when it is created.
@srvproduct='Microsoft OLE DB Provider for ODBC', -- OLE DB Provider.
@provider='MSDASQL', -- Provider_name.
@datasrc ='fonccx9-01', -- DSN Name of the ODBC Data Source.
@provstr= -- ODBC Connection String.
'Driver={IBM Informix ODBC};Server=fonccx9_01_uccx;Database=db_cra; Uid=uccxhruser; Pwd=Some-Password;'
EXEC sp_addlinkedsrvlogin
@rmtsrvname = 'fonccx9_01',
@useself = 'FALSE',
@rmtuser = 'uccxhruser',
@rmtpassword = 'Some-Password'
Note that the server name is "fonccx9-01", but the dash is an illegal character in the server name, so you have to change that to an underscore. You still have to manually build the ODBC data source on the box where you are trying to create the linked server. -
Enhancement Request for Reports
I did search; sorry if I missed a similar request.
I would like the ability to associate a report with a specific connection to avoid the connection selection. Reports not associated would still show the connection selection dialog. Thanks.Hi,
We do have a more general enhancement logged to identify a "default" connection overall. I'll log this to the mix as well.
-kris -
I'm triying to create a page that contains a report a button and some multiselect list.
The idea, it's to have the button and the multiselect list in one region and the report in another. When you navigate to the page with them, the report shouldnt be displayed, but after you select values in the multiselect list and hit the button it should appear. If I navigate to another tab and then navigate to this page the report shouldnt appear until after I select values and hit the button.
So far I haven't been able to find a how to do this. I would like to know how this can be accomplished. I have tried, using the value of session and modified it using the button or have a hidden field that the button modifies it but, If I do that the values of the multiselect werent modified.i just noticed that %null% thing, too, so i'll log that in a bit. thanks. about the condition you're using for your region, i'd go a different route if i were you. it sounds as if you've allowed your multiselect lists to show null values. if you do that and do not specify a "Null return value" for the LOVs, it'll return that %null% string for which you're checking. it's up to you if you want to use our default null string in your condition, but i wouldn't recommend it. we talked about this %null% stuff at...
PL/SQL returing SQL and null entry in select LOV
...so take a look there and decide if you still want to use it. more importantly, though, the first time your users access your report page, those %null% values for your p1_multiselect1 and p1_multiselect2 items won't be set. therefore, checking for %null% in that case does you no good. just keep that mind as you set up your page. assuming you do, in fact, wish to show a null value in your multiselect items, here's my suggestion:
-in each of your multiselect items, enter a "Null return value" like "novalue"
-also in your multiselect items, enter something like "Select a value from the list below" in the "Null display value" fields
-also in your multiselect items, enter that "novalue" string into the "Default value" fields
-have your report region render with a condition type of "PL/SQL Expression" and have "Expression1" be something like instr(:P1_MULTISELECT1||:P1_MULTISELECT2,'novalue') = 0
hope this helps,
raj -
hi all,
i created links for an element but for some element links the costing and balancing codes were mistakenly given wrong and the element links are plenty so i am unable to find which is wrongly given.
can some 1 out there provide me with the sql query that will allow me to create a report to run and confirm all the links have costing and balancing codes for all the earnings or voluntary deduction elements.
Thank you for reading my issue. plz help!See if the below helps.
Change the business group id in the query below-
select ppf.payroll_name
,pj.name Job,hou.name HR_ORG,ppg.group_name People_Group
,pel.employment_category
,hra.location_code
,pet.element_name,pet.reporting_name,pec.classification_name
,pel.costable_type
,pel.link_to_all_payrolls_flag
,pcak1.concatenated_segments Element_Cost_Segments
,pcak1.segment1
,pcak1.segment2
,pcak1.segment3
,pcak1.segment4
,pcak1.segment5
,pcak1.segment6
,pcak1.segment7
,pcak1.segment8
,pcak2.concatenated_segments Balancing_Cost_Segments
,pcak2.segment1
,pcak2.segment2
,pcak2.segment3
,pcak2.segment4
,pcak2.segment5
,pcak2.segment6
,pcak2.segment7
,pcak2.segment8
from pay_element_links_f pel
,apps.PAY_COST_ALLOCATION_KEYFLEX pcak1
,apps.PAY_COST_ALLOCATION_KEYFLEX pcak2
,pay_element_types_f pet
,pay_payrolls_f ppf
,pay_element_classifications pec
,per_jobs pj
,hr_all_organization_units hou
,PAY_PEOPLE_GROUPS ppg
,hr_locations_all hra
where pel.element_type_id = pet.element_type_id
and ppf.payroll_id(+) = pel.payroll_id
and pcak1.cost_allocation_keyflex_id(+) = pel.cost_allocation_keyflex_id
and pcak2.cost_allocation_keyflex_id(+) = pel.balancing_keyflex_id
and pet.business_group_id = 0
and pet.classification_id = pec.classification_id
and pj.job_id(+) = pel.job_id
and hou.organization_id(+) = pel.organization_id
and ppg.people_group_id(+) = pel.people_group_id
and hra.location_id(+) = pel.location_id
and sysdate between pel.effective_start_date and pel.effective_end_date
and sysdate between pet.effective_start_date and pet.effective_end_date
and sysdate between ppf.effective_start_date(+) and ppf.effective_end_date(+)
order by ppf.payroll_name,pec.classification_namePlease close the thread, if your issue is resolved.
Cheers,
VB -
How to fetch data from BI cube to BPC report
Hi Experts,
I am very fresher to work on BI-BPC integration project for SAP ABAP.
Requirement is like we have input of TIME, PLANT, MATERIAL for this we need to fetch closing stock of material in BPC reprot.
Closing Stock will not come directly from BI cube because its calculation part on the basis of input period.
So please suggest me what are the different ways to achieve this.
Regards,
Dipesh.Hi Dipesh,
as far as I know BPC needs it´s own cubes.
Here in this forum we deal only with BI-IP.
You better ask your question here:
SAP Planning and Consolidation, version for SAP NetWeaver
regards
Cornelia
Maybe you are looking for
-
Can't get it working - just want to view another desktop on my home network
I need to be able to view (not control) the desktop of my PowerMac that is connected to my Zoom DSL modem in another room. I want to view that desktop from my MacBook Pro connected wirelessly to the modem. The PowerMac is running Mac OS X 10.3.9. The
-
Lotus Domino (iNotes) file attachments do not work
iNotes does not work properly with Firefox 4.0.1 (Windows and Mac) One can't compose a message with an attachment. Also if a user receives an email with an attachment, they can't download it. I have created an email account for the Firefox developers
-
my problem is that most of my imac hard drive is being taken up by 200gb of "other' memory i am running time machine does this contribute how can i get rid of all "other" memory thanks
-
How do you test your Java Pricing UserExits in eclipse?
How do you test your Java Pricing UserExits in eclipse?
-
Since upgrading to v. 7, there is no way to burn an audio CD of my playlists. I get a message that says either I can't burn music purchased from the iTunes store to CD, or a message that tells me my aiff files can't be burned to an mp3 cd. HELP. imac