Sharepoint Web Analytics no data for reports

Hi all,
I would like some assistance in troubleshooting the web analytic problem I am experiencing with one of my farms.
My web analytics reports stopped beeing generated recently and the uls logs have not been helpfull at this point.
I have checked the following:
Verified that the Web Analytics Data Processing Service and Web Analytics Web Service are started on the server.
Made sure web analytics service application is started.
.USAGE files are being generated on the WFE
Noticed that the SharePoint Logging database (LoggingDB) DOES not contains any information.
I think this is where my problem resides, I have tried to create a new Web Analytics services application, with a new staging and logging database, but no luck.
I have also tried to create a new wss_logging db, still no luck.
I have made sure that the account that runs web analytics has the correct SQL db right on the logging db. still no luck.
Your assistance is highly appreciated.
Clifford - South Africa

Generally it take 24 hrs to generate analytics data.
Check if below jobs are active:
Diagnostic Data Provider: Event Log
Diagnostic Data Provider: Performance Counters – Database Servers
Diagnostic Data Provider: Performance Counters – Web Front Ends
Microsoft SharePoint Foundation Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
http://pinchii.com/home/2012/03/site-web-analytics-reports-show-no-data-in-sharepoint-2010/
Also try steps from:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0728b722-29e1-4de3-87ee-45ac40242ccf/web-analytics-no-data-for-sites?forum=sharepointadminprevious

Similar Messages

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

Actication Data for reporting in InfoCibe

Hi!
I'm new SAP BI Consultant and I need some helps according to InfoCube loading.
I load coorectly my InfoCube but I don't know how to activate my requests for reporting in BW.
We don't have a press bouton 'Activate' like when we want to activate data for reporting in DSO.
Please, does somebody tell me the process?
Thks!

Hi Gaudenzio ,
Welcome to BI. Activation is only used in standard DSOs which have 3 tables :new ,change log and active. When data is loaded into a DSO, it is loaded into the new table. Activation is performed to move this data to the change log and active tables.
You can refer the below link for more info.
[http://help.sap.com/saphelp_nw70/helpdata/en/43/5fc0680a876b7de10000000a422035/frameset.htm]
You do not require activation for infocubes or write optimsed DSOs.
Data is automatically available for reporting when you load a request into an infocube.
Hope this helps.
Regards.

Previous month end data for report

Hi expert,
I have to calculate previous month end data for my report.
let say if user select 15 oct then he should be able to see 30 sept data.
I have calander prompt.
Thanks,

Hi,
Use presentation variable in date prompt.
Apply sql filter(covert to sql) on report as date_column= TIMESTAMPADD(SQL_TSI_DAY,-DAYOFMONTH(date 'presntation_variable'),date 'presentation_variable')
Refer : How to get LAST_DAY in obiee
Regards,
Srikanth

Unable to collect NIC data for reporting with MIB-II module

Hi all,
Here we have SunMC 3.6.1 set up with almost all the available modules, including the complete "MIB-II Instrumentation" one. We also have the "Performance Reporting Manager" feature, and want to use it to generate a hole bunch of performance reports for our Sun servers.
The problem I am facing is that I try to collect data through the "MIB-II Instrumentation module". I browse into "Interfaces Group", and there I can see all the NICs I have on the system. I would like to record the "If In Octets" and the "If Out Octets" fields. I right-click on these fields, I select the "Attribute Editor", then I click on the "History" Tab, and I choose to save the history on the disk, at each 300 seconds, and the file type is "circular".
Even after waiting for 24 hours, I don't have access to data that should be recorded. If the Performance Report Manager application, when I list the "data availability" for the server where I activated the collect, all I see is the "Kernel Reader" module collects I already activated: I don't see any "MIB-II Instrumentation" module there...
On the "Server details" window, when I go the the "Module management" tab, if I choose "MIB-II Instrumentation" module, it is charged and activated. However, when I click on the "Rules" button, the only ones appearing are the following:
IF Oper Status (1)   rCompare   -   -   -
IF Oper Status (2)   rCompare   -   -   -
IF Oper Status (3)   rCompare   -   -   -
IF Oper Status (4)   rCompare   -   -   -and I find it to be exactly the same for the "MIB-II (Simple)" module... Could it be the reason why I cannot collect the "IF In Octets" and "IF Out Octets" fields?
Is there a way I can collect more relevant statistics about network usage with SunMC, using the "MIB-II Instrumentation" module, or something else within SunMC?
Thanks in advance!!
Ben

Hi Ben,
Is there a way I can collect more relevant statistics
about network usage with SunMC, using the "MIB-II
Instrumentation" module, or something else within
SunMC?It sounds like a general problem with PRM: though if the Data Availability tab shows it's pulling Kernel Reader data every hour, then it should show your MIB-II info as well.
Even then octet counts aren't terribly useful: they're just big numbers that get bigger: you really need to see rates over time to get an idea of what your network is doing.
You could try the SystemMonitor module that's part of PlusPack:
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-network-h.html
It shows MB/minute rates for each interface. If that's the type of info you need then you can enable those numbers for PRM or Reporter instead.
Regards,
[email protected]
http://www.HalcyonInc.com

How to publish a sharepoint web application to internet for external users.

Hi
how to publish a share point site to internet,
In test server : we branded a publishing enabled site and uploaded content and want to publish for internet users
we have a production sharepont server,
1) how to configure alternate access mappings in default zone,internet zone when we create new web application in prod share point server.
adil

For internet publishing ifyou want or need change the authentication method you need to EXTEND the website and enable the CLAIM authentication so the user can login using a HTML form for username and password.
SharePoint make a url parsing to identify the content
to display so you need to explain all the server name used for contacting the WebApplication. You can use 5 different name for the same server
(AAM Alternate Access Mapping).
N.B. http and https are different name (AAM Alternate Access Mapping)Lorenzo
LSo Lorenzo Soncini Trento TN - Italy

Error while reading data for reporting

Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
Sandy

Hi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy

Data for Report Painter report

Hi Gurus,
I have a report painter report S_ALR_87013019 . This uses the
Library 602 (gr23), report - 60BU-001 (GRR3).
Need to create a regular report based on this, Can you Please tell from which tables the values are getting retrieved by this report painter report, or in general on how to trace back the tables used by the report painter.
Also if it uses Set ID as inputs for fetching data, is there a way to get the setid/setclass value.
Thanks,
Regards,
Raman

Hi
The As on Date balance cant be cumulated...
Eg; you bought inventory worth 10 million in Current year and as of now you have 4 million worth of inventory in stock
Cumulated bal in this case is 10 mil and As on Date balance is 4 million... 4 million is what you will get in SAP reports
The same Key figure which shows values in comp code currency can be used
br, Ajay M

Web Analytics reports and not showing data

Recently we are not seeing Web Analytics data on our sites in our SharePoint 2010 farm. Before we used to see the data. This is what we are seeing now "There is no data available for this report. Here are some possible
reasons: (1) Web Analytics has not been enabled long enough to generate data;
(2) There is insufficient data to generate this report; (3) Data logging
required for this report might not be enabled; (4) Data aggregation might not be
enabled at the level required for this report."
I checked the Web Analytics Service Application and it is started. Web Analytics Data Processing service is started on all servers.
Microsoft SharePoint Foundation Usage Data Import Timer job is running every 30 minutes, while Microsoft SharePoint Foundation Usage Data Processing job is disabled. Does this job has to be
enabled for the web analytics data to be reported? Are there any other places to check to debug the problem? Appreciate any help.
rani

Hi Rani,
The timer job Microsoft SharePoint Foundation Usage Data Processing needs to be enabled, as it will aggregates and writes the data to the Web Analytics Reporting database.
Please enable this timer job and run the timer job to see how it works.
More reference about this error:
https://timreemtsma.wordpress.com/2011/10/25/sharepoint-2010-web-analytics-no-data-available/
Thanks,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Site Web Analytics reports -- no more data

Hi,
I just checked the Site Web Analystics reports and there is no more data since mid Dec. Any thoughts? Is there anything I have to reconfigure?
Thanks in advance.

I had similar issue: No data in web analytic report. And I found a lot of error message in Windows Log and SQL Server log:
An exception occurred while enqueueing a message in the target queue. Error: 15404, State: 19. Could not obtain information about Windows NT group/user 'DomainName\UserName'
I installed my SharePoint 2010 farm using DomainName\UserName as farm account, web application pool account and services account.
And the SharePoint 2010 farm is now disconnected with the domain.
I found this:
http://connect.microsoft.com/SQLServer/feedback/details/311104/msft-edw-when-logged-in-with-cached-credentials-service-broker-drops-incoming-messages-with-an-exception-occurred-while-enqueueing-a-message-in-the-target-queue-error-15404-state-19
, that says the service broker has some known issue with cached credential, so i changed all these account to a local machine account with PowerShell (http://cid-6f40fb61d28cf147.office.live.com/view.aspx/Technology/Using%20Local%20Computer%20Account%20in%20SharePoint%202010.docx
), but still does not work. The 15404 error is still generated with the ‘DomainName\UserName’ account.
Finally, I got this article with similar error message:
http://blogs.msdn.com/b/steverac/archive/2009/08/30/opsmgr-agent-discovery-hanging-after-enabling-broker-service.aspx
. I changed the db owner of the Web Analytics Staging database from ‘DomainName\UserName’ to local machine account with sp_changedbowner. Now, the 15404 error is no longer generated. And after some time (for the scheduled timer
jobs to started and run), I can see data in Web Analytics report. (Actually, I changed the db owner of both Web Analytics Staging db and Reporting db. I don’t know whether both needed).
And according to
http://technet.microsoft.com/en-us/library/cc512725.aspx
, the SharePoint Web Analytics feature relies on SQL Server service broker to function. The SQL Server service broker cannot be started manually. A SharePoint timer job runs one time per day to ensure that SQL Server service broker is enabled on the necessary
databases. 7.After moving databases, you should manually run the health rule "Web Analytics: Verifies that the SQL Server Service Broker is enabled for the Web Analytics staging databases."

SharePoint 2010 Web Analytics showing user Display Name and Account Name from the same user

Hi!
Since July, 16th 2012 the Web Analytics Daily Unique Visitors reports started to show almost the double of visitors we used to have on our Web Application. Here are some of the data (I intentionally deleted the weekend data):
10/7/2012 2.497
11/7/2012 2.723
12/7/2012 2.722
13/7/2012 2.699
16/7/2012 5.055
17/7/2012 4.963
18/7/2012 4.954
19/7/2012 4.998
20/7/2012 4.965
23/7/2012 5.117
24/7/2012 5.012
25/7/2012 5.071
As you may notice the data jumped from around 2.700 unique visitors to around 5.000 unique visitors. As the number of permissioned users remains constant it is pretty odd. I also checked the Number of Page Views report and see no change on its behavior.
The number of page views remained constant.
So I went to look the Top Visitors report and understand why the visitors number almost doubled. The analytics started to count the users Display Name and Account name as two different visitors with a different number of page views. Let me show you an example
from yesterday (July, 25th) Top Visitors report:
#    Visitor                  Page Views   %
1   Cinthia XXXXXXXXXX    359      0,55%
5   Giselle XXXXXXXXXX     143        0,22%
7    Aline XXXXXXXXXX       138        0,21%
15 nt\cmazevedo              111        0,17%
60 nt\gbsantana                 69        0,11%
73 nt\aglsiqueira                 65      0,10%
"Cinthia" and the account "nt\cmazevedo" are the same person. The same is applied to "Giselle" / "nt\gbsantana" and "Aline" / "nt\aglsiqueira".
As I stated this is an example from July, 25th. If I checked the same report from a period before July, 16th I can only see the users Display Name as "Visitors". No account name is displayed or counted as a different visitor.
About the environment:
We have two SharePoint 2010 farms: a "corporate" and a "enterprise". The corporate farm contains four web servers and a central administration servers with publishing services. The enterprise farm contains two servers running User Profile Services, Search
Services and some others. Our main version is the SP1 with June/2011 Cumulative Update with a few more hotfixes applied.
This behavior on analytics is affecting all web applications (we have more than 20) installed on this farm and my company Support team said that no change were made on SharePoint on the weekend the problem started.
Does anyone have any tip about what is going on?
Thanks in advance!

Hi, Manas!
First of all thanks for your interest on this issue but I don't think it is related to the User Profile or the Active Directory.
I checked both records and there was no change on the Display Names. All the users have "full names" as display names (first + middle + last name) and not logins as SharePoint is displaying on this report.
But I did a test yesterday and checked the results today confirming that just the access been made using a specific server are causing this. Explaining it better:
I have four web servers on my farm named from P01 to P04. Then I created this test script:
Step 1: Change local HOSTS file to point the web application on the server P01.
Step 2: Access site "A"
Step 3: Access site "B"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P02.
Step 2: Access site "C"
Step 3: Access site "D"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P03.
Step 2: Access site "E"
Step 3: Access site "F"
Step 4: Close the browser.
Step 1: Change local HOSTS file to point the web application on the server P04.
Step 2: Access site "G"
Step 3: Access site "H"
Step 4: Close the browser.
I asked three users to execute that script. The results: All access to the sites "C" and "D" were registered on Web Analytics with the user account name such as "nt\cmazevedo". All the other sites registered the user Display Name correctly such as "Cinthia
XXXXXXXXXX".
With this test we could isolate the problem just on the server P02. It doesn't occur on the others. Now my support team is trying to find any configuration difference between this server and the other three that could point for the root cause.
I am also looking for some information regarding the service responsible for this task ("transform the account name into a display name") to understand why it doesn't work on one server and works on the others.
Thanks!

Sliding window sanario in PTF vs Availability of recently loaded data in the staging table for reporting purpose

Hello everybody, I am a SQL server DBA and I am planning to implement table partitioning on some of our large tables in our data warehouse. I
am thinking to design it using the sliding window scenario. I do have one concern though; I think the staging tables we use for new data loading and for switching out the old partition are going to be non-partitioned, right?? Well, I don't have an issue with
the second staging table that is used for switching out the old partition. My concern is on the first staging table that we use it for switch in purpose, since this table is non-partitioned and holding the new data, HOW ARE WE GOING TO USE/access THIS DATA
FOR REPORTING PURPOSE before we switch in to our target partitioned table????? say, this staging table is holding a one month worth of data and we will be switching it at the end of the month. Correct me if I am wrong okay, one way I can think of accessing
this non-portioned staging table is by creating views, which we don’t want to change our codes.
Do you guys share us your thoughts, experiences???
We really appreciate your help.

Hi BG516,
According to your description, you need to implement table partitioning on some of our large tables in our data warehouse, the problem is that you need the partition table only hold a month data, please correct me if I have anything misunderstanding.
In this case, you can create non-partitioned table, import the records which age is more than one month into the new created table. Leave the records which age is less than one month on the table in your data warehouse Then you need to create job to
copy the data from partition table into non-partitioned table at the last day of each month. In this case, the partition table only contain the data for current month. Please refer to the link below to see the details.
http://blog.sqlauthority.com/2007/08/15/sql-server-insert-data-from-one-table-to-another-table-insert-into-select-select-into-table/
https://msdn.microsoft.com/en-us/library/ms190268.aspx?f=255&MSPPError=-2147217396
If this is not what you want, please provide us more information, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support

Excel Add-in for report buider 3.0

Hi Guys,
I am looking forward to use Report builder 3.0 inside excel as an add-in. I don't want do develop in a stand alone version as I need to refresh the report in excel and change the data dynamically. I am doing this because I wanted to give cell references
to other sheets in the excel file as well.
I know pivot table will do. But I was not able to achieve the desire format in what I want actually.
please help.
Thanks.

I am looking forward to use Report builder 3.0 inside excel as an add-in.
Hello,
There is no functional relation between Report Builder and Excel, therefore there is no such an addin.
If PowerPivot is not suitable for you, then maybe an option could be to query (link) the required data from your data source directly in Excel and then to use that as data for reports/charts etc.
Olaf Helper
[ Blog] [ Xing] [ MVP]

No data with Web Analytics Reports - SharePoint 2013

Hello,
I have data when I click on the Web analytics reports. I am using SharePoint 2013, but with sites with the SharePoint 2010 visual interface.
What are some of the things to look for to get these working?
I have Reports feature enabled at the site collection level.
I have enabled usage data collection and have scheduled it.
What is the SharePoint job to check to ensure that it is running.
What is the permissions to use for the Logging database and the log folder?
Thanks.
Paul

Take a look at http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
to see if it explains what you're looking for (essentially, Web Analytics is no longer available).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Sharepoint Web Analytics no data for reports

Similar Messages

Maybe you are looking for