Unable to collect NIC data for reporting with MIB-II module

Hi all,
Here we have SunMC 3.6.1 set up with almost all the available modules, including the complete "MIB-II Instrumentation" one. We also have the "Performance Reporting Manager" feature, and want to use it to generate a hole bunch of performance reports for our Sun servers.
The problem I am facing is that I try to collect data through the "MIB-II Instrumentation module". I browse into "Interfaces Group", and there I can see all the NICs I have on the system. I would like to record the "If In Octets" and the "If Out Octets" fields. I right-click on these fields, I select the "Attribute Editor", then I click on the "History" Tab, and I choose to save the history on the disk, at each 300 seconds, and the file type is "circular".
Even after waiting for 24 hours, I don't have access to data that should be recorded. If the Performance Report Manager application, when I list the "data availability" for the server where I activated the collect, all I see is the "Kernel Reader" module collects I already activated: I don't see any "MIB-II Instrumentation" module there...
On the "Server details" window, when I go the the "Module management" tab, if I choose "MIB-II Instrumentation" module, it is charged and activated. However, when I click on the "Rules" button, the only ones appearing are the following:
IF Oper Status (1)   rCompare   -   -   -
IF Oper Status (2)   rCompare   -   -   -
IF Oper Status (3)   rCompare   -   -   -
IF Oper Status (4)   rCompare   -   -   -and I find it to be exactly the same for the "MIB-II (Simple)" module... Could it be the reason why I cannot collect the "IF In Octets" and "IF Out Octets" fields?
Is there a way I can collect more relevant statistics about network usage with SunMC, using the "MIB-II Instrumentation" module, or something else within SunMC?
Thanks in advance!!
Ben

Hi Ben,
Is there a way I can collect more relevant statistics
about network usage with SunMC, using the "MIB-II
Instrumentation" module, or something else within
SunMC?It sounds like a general problem with PRM: though if the Data Availability tab shows it's pulling Kernel Reader data every hour, then it should show your MIB-II info as well.
Even then octet counts aren't terribly useful: they're just big numbers that get bigger: you really need to see rates over time to get an idea of what your network is doing.
You could try the SystemMonitor module that's part of PlusPack:
http://www.halcyoninc.com/products/PlusPack/help/SystemMonitor/HALSolarisSystemAlert-network-h.html
It shows MB/minute rates for each interface. If that's the type of info you need then you can enable those numbers for PRM or Reporter instead.
Regards,
[email protected]
http://www.HalcyonInc.com

Similar Messages

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

How do I perform a trigger that collect the data for every rising edge continuously and then automatically put the data in a .xls file??

I need to collect the data for every rising edge a trigger perfoms. So far I could collect the data but it seems that it only collect the data in the start of triggering, but not continuously. I also want to put the data in an excel spreadsheet and automatically add new set of data when the next rising edge occur. Please help.
thanks a lot.

LabWindows/CVI actually ships with a comprehensive set of examples for just about every area of programming you can use it in, including triggered analog data acquisition and ActiveX control of Microsoft Excel for data logging. Go to the following two directories on your computer to find respective examples for the two areas you are inquiring about:
1) C:\MeasurementStudio\CVI\samples\DAQ\Ai\DAQsingleBufExtTrig.PRJ
2) C:\MeasurementStudio\CVI\samples\activex\excel\excel2000dem.prj
Just make sure to study the examples carefully so that you fully understand the processes followed for triggered analog acquisition and the process of launching an ActiveX automation server for control, and then you should be able to merge the concepts shown in both of the example
s to make the application you desire.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Unable to locate Co data for co account assignment in EK02

Hi,
While creating entries in EK02 we are getting below error:-
"The system was unable to locate CO data for CO account assignment key XXXX". We are using profit center and segment reporting " and have maintained the necessary settings in "Define CO Account Assignment Keys" against company code , segment and profit center and also maintained cost element settings.
Any solution to resolve this error.
Thanks and Regards
Kumar

Hi Kumar,
Below are the configurations required in this regard.
1. maintain GL account and const element - FS00. You can check whether the GL maintained as P/L GL.
2. maintain the cost centre - KS01/02/03. Please verify all the details whether or not have been maintained correctly.
3. maintain EK01 (if required).
4. maintain EK02 - please double check whetheryou have CO account assignment 'X' in there.
5. maintain CO account assignemnt key in SPRO - Check whether correct cost centre is maintained against correct CoCd.
This would suffice.
Please let me know if you're stil facing the issue.
Thanks
Bodhisattwa

Unable to get tha data for Residual Order Plan query-0PS_C04_Q0008

Hi Xperts,
i have activated standard query-0PS_C04_Q0008.
But when i am executing the query i am unable to get the data for "Residual order plan" in the report output..
As i checked the transformation and the queries for this, every thing seems ok.
Could please suggest me the best way to check further or How can i get the data for this field?
Regards,
SAP

Check whether you have data for "Residual order plan" in 0PS_C04.

Unable to find security data for sender

Hello, does anybody know what this message means. The problem appear when I send an Idoc to XI. Other interfaces (Master data) are working properly. My question is, do I need to make some extra settings for the transactional data interfaces (SHPMNT)?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages" p2="VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
<SAP:Text language="EN">Technical routing: Unable to find security data for sender sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages for receiver VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries</SAP:Text>
</SAP:ErrorHeader>
regards
Ernesto Duran

HI,
i am also getting the same error in my scenario. Could u plz inform me what is the solution?
Rgds,
Ram Sri

How to Restrict Single Delivery Date for PO with Multiple Line Items

Dear Experts,
How to Restrict Single Delivery Date for PO with Multiple Line Items.
System needs to through Error Message if User Inputs Different Delivery Dates for PO with Multiple Line Items in ME21N Tcode.
Can we achive this by Some Enhancement in SAP or Not ???
If so how to do it.
Any Inputs is highly appreciated.
Thanks and Regards,
Selvakumar. M

Hi Selvakumar,
we can resrict the PO to have a single delivery date in all the line items by means of giving a error message or overwiting the delivery date keyed/determined in the line item.
You can use the BADI -> ME_PROCESS_PO_CUST. In which you need to implement the method PROCESS_SCHEDULE.
(for technical aid - This method will be called for each and every PO line item, From the imporing parameter im_schedule we can get all the details of current PO line, even we can change the data in the current PO line. )
Regards,
Madhu.

Actication Data for reporting in InfoCibe

Hi!
I'm new SAP BI Consultant and I need some helps according to InfoCube loading.
I load coorectly my InfoCube but I don't know how to activate my requests for reporting in BW.
We don't have a press bouton 'Activate' like when we want to activate data for reporting in DSO.
Please, does somebody tell me the process?
Thks!

Hi Gaudenzio ,
Welcome to BI. Activation is only used in standard DSOs which have 3 tables :new ,change log and active. When data is loaded into a DSO, it is loaded into the new table. Activation is performed to move this data to the change log and active tables.
You can refer the below link for more info.
[http://help.sap.com/saphelp_nw70/helpdata/en/43/5fc0680a876b7de10000000a422035/frameset.htm]
You do not require activation for infocubes or write optimsed DSOs.
Data is automatically available for reporting when you load a request into an infocube.
Hope this helps.
Regards.

OLAP tools for reporting with OPM

Has any one used OLAP tools for reporting with OPM?
If not, has anyone used Discoverer with OPM?
Thanks in advance,

What version of OPM are you using?
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by venkateswara pilla ([email protected]):
Has any one used OLAP tools for reporting with OPM?
If not, has anyone used Discoverer with OPM?
Thanks in advance,<HR></BLOCKQUOTE>
null

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

Sharepoint Web Analytics no data for reports

Hi all,
I would like some assistance in troubleshooting the web analytic problem I am experiencing with one of my farms.
My web analytics reports stopped beeing generated recently and the uls logs have not been helpfull at this point.
I have checked the following:
Verified that the Web Analytics Data Processing Service and Web Analytics Web Service are started on the server.
Made sure web analytics service application is started.
.USAGE files are being generated on the WFE
Noticed that the SharePoint Logging database (LoggingDB) DOES not contains any information.
I think this is where my problem resides, I have tried to create a new Web Analytics services application, with a new staging and logging database, but no luck.
I have also tried to create a new wss_logging db, still no luck.
I have made sure that the account that runs web analytics has the correct SQL db right on the logging db. still no luck.
Your assistance is highly appreciated.
Clifford - South Africa

Generally it take 24 hrs to generate analytics data.
Check if below jobs are active:
Diagnostic Data Provider: Event Log
Diagnostic Data Provider: Performance Counters – Database Servers
Diagnostic Data Provider: Performance Counters – Web Front Ends
Microsoft SharePoint Foundation Usage Data Import
Microsoft SharePoint Foundation Usage Data Processing
http://pinchii.com/home/2012/03/site-web-analytics-reports-show-no-data-in-sharepoint-2010/
Also try steps from:
http://blogs.msdn.com/b/sharepoint_strategery/archive/2012/03/16/troubleshooting-sharepoint-2010-web-analytics.aspx
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0728b722-29e1-4de3-87ee-45ac40242ccf/web-analytics-no-data-for-sites?forum=sharepointadminprevious

Bussiness logic/technical flow for report with tcode MB5B

Guys,
Please send me any Functional Spec or Technical Spec of the standard SAP report with tcode MB5B ( Stock as on posting date). Any document explaining logic or technical flow is very much useful to me..I need to understand the logic and what are all the underlying tables used. I will assign more points to anyone who help me.

MB5B - Stock on posting date
The report Stock for posting date lists a company's own stocks in a particular time period (earliest date/Time 00:00, latest date/time 24:00).
The posting date is used for selection. Note that the posting date may be different from the entry date (date entered in the system) as well as the document date.
Starting with the current stock balance, the report uses the material documents to calculate the stock balance for the specified posting date.
Requirements
You need authorization to display material documents for all chosen plants (authorization object Material documents: plant, activity 03).
Output
Thisreport issues a list with the following information for each material:
Stock quantity and stock value on first date
Total and value of all receipts
Total and value of all issues
Stock quantity and stock value on last date
List of the material documents that were posted in the specified time period
To go to the detail screen for the material document item, place the cursor on a material document and choose Goto -> Document item
If you require more data and want a detailed evaluation, you can enhance the current layout or choose another existing layout via Settings -> Layout.
Tables Used :
t001; t001w; t001l; mchb, mbew,mseg.
Thanks

Crystal Report Viewer Credential Prompt for Report with Dynamic Parameters

The .NET Crystal Report Viewer is prompting for database credentials when launching a report containing dynamic parameters. This only occurs for reports created with SAP Crystal Reports 2011 designer. Reports created with Crystal Reports XI designer (where dynamic parameters were first introduced) work correctly.
The credential prompt window contains the following fields:
- Server Name: <server name> (disabled)
- Database Name: <database name> (disabled)
- User Name: <empty> (enabled)
- Password: <empty> (enabled)
- Use Single Signon Key: false (disabled)
The values in the prompt window which are disabled are the database connection values used during the design of the report in the SAP Crystal Reports 2011 designer.
Expected Result:
- No prompt for database credentials.
- Values read from the database should be populated in a drop down for the dynamic parameters.
Environment:
- Visual Studio 2010 (C#)
- Windows 7 Enterprise
- SAP Crystal Reports runtime engine for .NET Framework 4
- SAP Crystal Reports, version for Visual Studio 2010
- SAP Crystal Reports 2011
The database connection is being set to use a DSN. It must be a DSN as the calling application is only aware of the DSN/Username/Password values. These values are being passed to the Crystal Report Viewer contained in a Windows form.
The database connection for the report is being set as follows:
foreach (InternalConnectionInfo internalConnectionInfo in this.report.DataSourceConnections)
    // Must set the UseDSNProperties flag to True before setting the database connection otherwise the connection does not work
    if (internalConnectionInfo.LogonProperties.ContainsKey("UseDSNProperties"))
        internalConnectionInfo.LogonProperties.Set("UseDSNProperties", true);
    // Supposed to set the database connection for all objects in the report (ie. main report, tables, sub reports)
    internalConnectionInfo.SetConnection(this.DSN, string.Empty, this.LoginName, this.Password);
The SetConnection method's signature is as follows:
   SetConnection(string server, string database, string name, string password)
As you can see from the code snippet above I am setting the DSN name as the server parameter, blank for the database parameter (a database connection using DSN should only require DSN name/Username/Password) and the database username and password respectively.
Is this a SAP bug?
Is this the correct way of setting the database connection to use a DSN?
Is there some other properties that need to be set somewhere else in the report through code?
Any help would be greatly appreciated.

Thanks for the pointer to the database connection code generator. After taking a look at the output from the tool I was able to finally get the dynamic parameters to load and populate properly without prompting for credentials. I needed to tweak the outputted code a bit to match my requirements of using a DSN only connection.
Instead of updating the database connection properties contained within the Report.Database.Tables collection from the CrystalReports.Engine namespace, I changed it to replace the database connection properties in the Report.ReportClientDocument.DatabaseController.Database.Tables collection from the CrystalDecisions.ReportAppServer.DataDefModel namespace. For one reason or another, using the RAS namespace solved the problem.
Below is the updated code with the change made:
using RAPTable = CrystalDecisions.ReportAppServer.DataDefModel.Table;
foreach (InternalConnectionInfo internalConnectionInfo in this.report.DataSourceConnections)
    // Must set the UseDSNProperties flag to True before setting the database connection
    if (internalConnectionInfo.LogonProperties.ContainsKey("UseDSNProperties"))
        internalConnectionInfo.LogonProperties.Set("UseDSNProperties", true);
    // Sets the database connection for all objects in the report (ie. main report, tables, sub reports)
    internalConnectionInfo.SetConnection(this.DSN, string.Empty, this.LoginName, this.Password);
// The attributes for the QE_LogonProperties which is part of the main property bag
PropertyBag innerPropertyBag = new PropertyBag();
innerPropertyBag.Add("DSN", this.DSN);
innerPropertyBag.Add("UserID", this.LoginName);
innerPropertyBag.Add("Password", this.Password);
innerPropertyBag.Add("UseDSNProperties", "true");
// The attributes collection of the tables ConnectionInfo object
PropertyBag mainPropertyBag = new PropertyBag();
mainPropertyBag.Add("Database DLL", "crdb_ado.dll");
mainPropertyBag.Add("QE_DatabaseType", "OLE DB (ADO)");
mainPropertyBag.Add("QE_LogonProperties", innerPropertyBag);
// Pass the database properties to a connection info object
ConnectionInfo connectionInfo = new ConnectionInfo();
connectionInfo.Attributes = mainPropertyBag;
connectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
connectionInfo.UserName = this.LoginName;
connectionInfo.Password = this.Password;
// Replace the database connection properties of each table in the report
foreach (RAPTable oldTable in this.report.ReportClientDocument.DatabaseController.Database.Tables)
    RAPTable table = new RAPTable();
    table.ConnectionInfo = connectionInfo;
    table.Name = oldTable.Name;
    table.QualifiedName = oldTable.QualifiedName;
    table.Alias = oldTable.Alias;
    this.report.ReportClientDocument.DatabaseController.SetTableLocation(oldTable, table);
this.report.VerifyDatabase();
Thanks again Ludek for the help.

Error while reading data for reporting

Hi Gurus,
I tried to get answer from the forums but not got exact answer to slove my issue..
Q: I had generated 10 reports on Multiprovider(Virtual cube + std Cube) on Bex analyzer.
But when i am Executing reports 3 reports are getting result where remaining 7 reports are throughing same error.
Error: error reading the data of infoprovider
error system error: no more storege space available for extending an internal table
error massage from data source XXXXXX from Source system XXX
error error occured during parallel processing
error error while reading data, navigation is possible
Where their are no parallel processing are going.
the 3 reports are taking 15 min to generate the report..
data is available in both sources with same selection options.
Can any one please through some light, what exactly need to do to get all the reports and to reduce the response time.
thanks in advance.
Sandy

Hi,
The problem was solved.
I had given restriction on 0COUNTRY with out calling Company code in the Column.
Were 0COUNTRY is also an attribute of 0COMP_CODE.
so i called both in the report and got the report with results...
this is how i solved the issue.
Thanks
Sandy

OBIEE Date Comparison report with multiple measures

Hello everyone...
I have a requirement where I need to create a date comparison report (Current Month vs. Prior Month vs Prior Month Year Ago vs YTD vs Prior YTD vs Rolling 3 months, etc) with multiple Measures (Quote count, Quote offered count, New Business count, etc). I am to generate this report in this fashion:
Quotes Current Month vs PM vs YoY Prior
Month Current Month Prior Year Current
YTD vs PM Prior
YTD Rolling 3 Months vs PM Prior Rolling 3 Months
Issued 120 120 123 1400 1020 1700 1580
Unique Risks
Offered 556 449 571 5881 6220 6101 5892
Unique Risk Close Ratio
Offered Close Ratio 21.6% 26.7% 21.5% 23.8% 16.4% 27.9% 26.8%
Bitmap
Avg Issued Premium 240 238 222 2801 2630 3104 2892
Avg Offered Premium
New Business
Count
Avg Full Term Premium
I understand that time series is an option, and have created the time series (which show up as measures).
My problem is:
when creating the report (even as a pivot table) , OBIEE is not allowing me to drag the measure to rows, nor is it allowing me to drag the time series to columns. Also, I need to do conditional formating on some of the columns showing an up arrow for increased vs. prior month and down arrow for decreased vs. prior month.
Does anyone have a solution for this issue? Any assistance would be greatly appreciated...
Please advise and thanks!!!

Jason,
You've been very helpful, but I guess I'm just not explaining myself that well. The Credit Memo's throw things off because they do not contain a "Paid Date" value. That field in the record is blank. Since it is blank the report query ignores them. Therefore when the report query returns all records that have a "Paid date" range of "x to y" they are never returned. This is a problem whenever a credit memo exists for an invoice because the "invoice total" never changes. So when a customer pays on their account for a particular invoice, they only pay what is due which is the "invoice total" minus any "credit" from the "Credit Memo". So when my A/R person receives payment they are showing the invoice paid in full because MAS automatically includes all invoices and credit memo's. My report does not because there is no data in the "Paid Date" field of the record for Credit Memos.
I've been doing alot research in trying to resolve this "exception" to my report. I think I may be on to something, but my knowledge of arrays is extremely limited. My resolution involves populating an array with the "invoice numbers" that are returned from the initial query from the supplied date range. Then using the "invoice numbers" from the array have it then populate my details section of the report with all of "invoice records" both the actual invoice record and any "credit memo" records. I can then group the records returned based upon the "invoice number". then within that grouping I can performing my calculations to show whether or not the invoice has been paid in full. What do you think? I've been able to populate an array with the invoice numbers based upon my date search range, but I have yet to figure out how to take that information and perform another lookup to pull in the rest of the data I need. Do you have any ideas?
Thanks. Bill

Unable to collect NIC data for reporting with MIB-II module

Similar Messages

Maybe you are looking for