Action not Trigger

Hi All,
My Action is not triggering after Changing Status of my transaction of Opportunity by CRMD_ORDER.
I put the schedule condition in Action Condition like this &CRM Opportunity.User Status& = E0002ZCRMOPPR .
ZCRMOPPR - status profile
E0002 - status - Follow up in Process
Thanks
Mahesh Kolte
Edited by: Mahesh kolte on Apr 21, 2010 1:47 PM

Got the solution

Similar Messages

CreateListItem Action at work flow not trigger Event reciever

Hello ,
I have two Lists (List1 , List2).
I have attached Workflow by SharePoint designer to List 1 .
I have attached event receiver (Item was added) to list 2 .
In the workflow . I use "CreateListItem" to create new item in list 2.
I have test the work flow . The item is added in List 2 , but the Event receiver not triggered .
if I Create new item in List2 from browser , the event receiver is triggered.
so why "CreateListItem" action not triggered event receiver ?
Thanks
ASk

Hi himo,
I made a test in my environment and when I start workflow in List1, then the event receiver in List2 is Triggered.
Here are my test steps:
1. Create a workflow for List1 in SharePoint Designer using CreateListItem action set the Title field to "Test" which is in List2.
2. Create an event receiver for List2 with the below code
public override void ItemAdded(SPItemEventProperties properties)
string siteUrl = "http://sp2013sps/sites/testdevsite";
ClientContext clientContext = new ClientContext(siteUrl);
List oList = clientContext.Web.Lists.GetByTitle("List2");
ListItem oListItem = oList.GetItemById(1);
oListItem["Title"] = "My Updated Title.";
oListItem.Update();
clientContext.ExecuteQuery();
base.ItemAdded(properties);
3. Deploy the event receiver.
4. When I execute the workflow in List1, then the title field in List2 will be updated to "My Updated Title". The event receiver has been triggered.
I suggest you recreate a new List and follow the steps to above to check whether it works.
Best Regards
Zhengyu Guo
TechNet Community Support

Dynamic Actions not firing when using date picker?

The dynamic actions don't seem to be triggering when selecting a date from the date picker, but trigger just fine when the dates are manually entered. Anyone else have this problem and if so is there a workaround to get it to work from the date picker as well? I am using Application Express 4.0.1.00.03
And how can I report this problem?

I'm already using Change.
If it matters, I have it set to:
Event: Select
Selection Type: Item
Condition: No Condition
My action type is just an alert right now since all I want to do is to see if I can trigger it (as in you have to walk before you can run).
Event Scope: Live
Conditon type: Dynamic Action not Conditional
Authorization Scheme: No Authorization Required

Quick Picks and Dynamic Actions not working

I have a page item that includes Quick Pick values. This item also includes a dynamic action to update another item when triggered by a change event. The problem is, quick picks do not trigger change events. Has anyone else seen this and come up with a solution? Thanks.

Hi,
the JavaScript code generated for the Quick Picks is using $s which triggers the change event for the target page item.
I just tried that out and it worked fine for me.
1) I have defined a text field with a few quick pick values.
2) Declared a dynamic action which fires on "Change". No condition set
3) The action is defined as "Alert"
The alert always shows when I pick a value with a quick pick.
Can you put an example on apex.oracle.com so that I can have a look.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

Error message when installing Flash Player : List of actions not found

I get an error message when trying to install Flash Player.
I use Windows 64 bit with Internet Explorer 64x.
I'm able to download, the installation starts but it stops before completing.
I get this error message (loosely transalated) :
Installation encountered errors
List of actions not found
How can I fix this ?
Thank you
Annie

I solved my problem by installing the Flash Player from home.
The network security at work prevented me from completing installation.
Thanks for your help.
Annie
2012/9/26 Pat Willener <[email protected]>
Re: Error message when installing Flash Player : List of actions not
found created by Pat Willener <http://forums.adobe.com/people/pwillener>in
Installing Flash Player - View the full discussion<http://forums.adobe.com/message/4728064#4728064

PAI is NOT trigger for ALV in subscreen

Hi, All
Currently, I am using ALV object to output ALV report in one SUBSCREEN.
When I double-click, the PAI is not trigger. But just go into double-click event directly.
However, If I use AVL function or object to output in NORMAL screen, PAI is trigger after double click.
SY-UCOMM is like %_GC 920 3

Hello Ocean
The ALV grid is a special control in terms that all the events are already pre-registered at the control (method SET_REGISTERED_EVENTS). This means that as soon as you define an event handler method and SET HANDLER for the corresponding event your application can deal with this event.
You can register all events of the ALV grid as application events (i.e. after any event handling PAI of the screen is triggered) at the CONSTRUCTOR method:
I_APPL_EVENTS = 'X'
However, I prefer to use method CL_GUI_CFW=>SET_NEW_OK_CODE because it offers more flexibility to me:
Only those event where I need to trigger PAI after event handling are affected
By setting a new ok-code I can trigger a specific logic at PAI
Regards
Uwe

I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== Today

Me too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

Print with write statements from webynpro does not trigger top-of-page

Print launched from webdynpro application via application server created with write statements does not trigger top-of-page event. When print is done from sapgui it works ok. The idea is to reuse backend print which was created for sapgui with abap list made application log in webdynpro application.

Hi,
here a short extract like i do it:
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
    METHODS:
   HANDLE_PRINT_TOP_OF_PAGE
         FOR EVENT PRINT_TOP_OF_PAGE OF CL_GUI_ALV_GRID,
ENDCLASS.                    "LCL_EVENT_HANDLER DEFINITION
* Event-Händer Implementierung
CLASS LCL_EVENT_HANDLER IMPLEMENTATION .
METHOD HANDLE_PRINT_TOP_OF_PAGE.
      PERFORM PRINT_TOP_OF_PAGE.
ENDMETHOD.
ENDCLASS.
CREATE OBJECT GR_EVENT_HANDLER.
SET HANDLER
GR_EVENT_HANDLER->HANDLE_PRINT_TOP_OF_PAGE FOR GR_ALVGRID_LEFT.
CALL METHOD GR_ALVGRID_LEFT->SET_TABLE_FOR_FIRST_DISPLAY
FORM PRINT_TOP_OF_PAGE.
LINSZ = SY-LINSZ - 16.
WRITE: / 'Report:   ', SY-REPID,
           AT LINSZ 'Datum:', SY-DATUM.
WRITE: / 'Benutzer: ', SY-UNAME,
           AT LINSZ 'Zeit: ', SY-UZEIT.
ENDFORM.
hope it helps.
Regards, Dieter

Links from outside apps like Mail will not trigger FireFox... but work in Safari

When I click a link in another program, like Apple Mail, it opens (or activates) Firefox.... but it does not "trigger" the link. If I copy the link, and past it into the Firefox URL bar, of course, it will work....
If I switch the preferred browser to Safari.... the same links works fine.
I've never seen this behavior before with a browser....

-> Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
-> Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Check and tell if its working.

Scope does not trigger

Hello,
I am trying to trigger a scope at a certain point. I have a test signal coming after a regular sinusoid. I want to measure the output when the test signal arrives. What happens is that when my test signal comes after 1 second the trigger works perfectly fine but when my test signal comes after 3 seconds the scope does not trigger at the point I want and keeps on triggering at unwanted points. This is a conceptual question. Could anyone please help me in that.
Thanks,
Krunal

Hello Krunal,
I am not exactly sure what your external signal looks like, however I can suggest a couple things for you to look at. First, if the absolute value of your sine wave amplitude is less than the test point you want to measure, the scope can simply level trigger at that point. It should not matter if the signal comes in after 1 seconds or 3 seconds. The only problem you might be seeing with this is a timeout error. This is caused by the read function not being able to sample enough data within the default 5 seconds limit. Adjusting the timeout would help if you are getting this error.
If your test signal value you need to trigger off of is within the absolute value of your sine wave signal it becomes more difficult because if you specify to trigger off of a rising edge 0.5V signal this point will occur many times before the ideal trigger point. Perhaps a combination of using the trigger hold off and trigger delay might help you time the start of your acquisition a little better. If this does not help, can you please post more detail about the sine wave, your test point you want to trigger off and the behavior you are currently seeing.
Regards,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D

Condition type (PR00)is not trigger in sale order

hi
i have maintained the condition record for the material .but the sale order , the contion type is not trigger in the sale order
where i made the mistake ,,,
with regards
dinesh

Hello
In your sales order, do a pricing analysis.
To do this Sales Order - Item - Condition - "Analysis" Button.
This will give you fair idea, why condition record is not getting determined in sales order.
Refer the link for example - [what to look in in Pricing Analysis|https://docs.google.com/leaf?id=0B-5wCmYJ-6dlMTY1Yjg1NzUtM2I5MC00MjUzLTg3ZDctY2M3NTBkZDdiMmE5&sort=name&layout=list&num=50]
Thanks & Regards
JP

Actions not displaying in Overview for ONE user ID

Hi Frnz...
For only ONE user ID Actions not displaying in Overview tab.
For this User ID Overview details are visible for some Employee IDs and for some its not visible.
Already checked Roles & Authorisations and IT 0302 & 0000 are active. Have also run RPUEVSUP.
Just to add.. this query is happening while a technical upgrade has happened from 4.6 to 6.0.
Pls help me ..
Rgds.. Raj

Hi,
I hope you have done this but FYR
Before clicking on the overview button maintain the dates as 01.01.1900 and 31.12.9999
Thanks
ABHI

"Orphan Timeline" & "End Action Not Set." What does this mean????

I am setting up a Blu-Ray DVD in Encore. I have a project on a Premiere Pro CS 5.5 Timeline, which is 2 and a half hours long with 24 Encore chapters in it. I have not yet Encoded it in Media Encoder as of yet.
I am setting up all my menus and buttons in Encore so all I have to do is link the buttons to them main project when I do encode it and then I can just Check it and Burn it.
I did check my project just now though and all buttons came up with 2 Errors:
1) Orphan Timeline
2) End action not set.
1) "Orphan Timeline", I assume that means that the button is not linked to any timeline as of yet, correct? (This would be true because there is no main project timeline in there yet.)
2) "End action not set." What does this mean? Will this go away once I add my whole project into Encore and I link up all of the buttons to the timeline?
Thanks in advance
Premiere Pro CS 5.5
Encore 5.5
Media Encoder 5

1) Orphan Timeline
2) End action not set.
Both of these suggest that you created a timeline in the Encore project, perhaps with no "asset" in it.
Yes, ignore both messages for now. But I prefer creating the timeline after, or along with, importing the asset into the Encore project.
If you believe you have not created a timeline, post a screenshot of your "flowchart."

Notification classification extractor not trigger delta

I am facing the same .we have created custom data source for Notification classification using notification master data extractor(0NOTIFICATN_ATTR) but delta is not trigger for any changes in the notification line items..

Hi Madhu,
In SAP standard, the DataSource 0NOTIFICATN_ATTR is not DELTA compatible.
Please refer to online documentation below, only a complete upload is
available:
http://help.sap.com/saphelp_nw70/helpdata/en/08/b388017dbff7479cc07f0249
0d60d8/frameset.htm
Thanks,
Vimal

Action not possible because change version exist

Dear All,
We are at SRM5.0- Extended Classic scenario and facing issues for changing some of the PO documents.
When the buyers are trying to change the PO, error is getting populated as 'Action not possible because change version exist'. This error is not allowing us to change the PO.
These POs are changed in the past and all the relevant changes are reflected to backend system with no issues. In other words Change Versions do exists for these POs. Flags for Change Version completion is also set and all historical versions can be seen but without change history.
Additional information -
1. No approval workflows are implemented for PO.
2. No locks are active for these documents.
Appreciate your help!
Regards,
Sagar

Hi Sagar and thanks for your response,
well, actually the active change version won't be preserved in any case. It would be overwritten in the first scenario, and deleted in the second one. The reason why I'd like to have this "brute force" method is to face an eventual human error. Suppose that a disalignment between R3 and SRM has been created; my report basically "alligns" the SRM version to the corresponding R3 one. And suppose also that the user made a mistake so that the program must be used a second time. I'd like to provide a way to "UNDO" the first execution of the program, that is to say: i'd like to provide a way to OVERWRITE the actual active, change version, or alternatively delete the change version that the report did create the first time it has been launched.
Hope it's a bit clearer now
Thanks for any hint/suggestion you can give me
EDIT: Oh, and please... can you provide me further information about your solution? I mean, use of that FM to unlock an active version of the PO and then the proper call to BBP_PD_PO_UPDATE specifying how you managed input params. Thanks a lot
Edited by: Matteo Montalto on Apr 9, 2009 11:43 AM

Action not Trigger

Similar Messages

Maybe you are looking for