Actions - Time of Processing

Hi CRM Gurus,
I have 2 questions.
1. In CRM config,(crmc_action_conf) , we have Time of Processing where we can tell when to process the action based on following options.
1. Immediate processing.
2. When Saving
3. Process using Selection Report.
Here the selection Report means 'RSPPFPROCESS' program? OR any other programs are there?
2. If RSPPFPROCESS program process the actions , then that means all the actions configured in TIme of Processing option
must be selected as 'Process Using Selection Report', then only RSPPFPROCESS program will pickup OR
if I use the other 2 options : Immediate Processing OR When Saving , the program 'RSPPFPROCESS' will pickup if there are actions ready to process.
Why did SAP give the above 2 options(1 & 2) in the selection screen of the RSPPFPROCESS program? Isn't the program should pickup only actions that are configured for 3 option(Process using selection report)?
Pls clarify.
Thanks,
Pandu

Hi Pandu,
The RSPPFPROCESS program, asyou might already know, is a monitoring tool to check for actions that were processed/incorrectly processed/not processed, from a central area.
In the event you want to execute, multiple actions at once or repeat them etc, you can do the same from here.
as for your Q2
To an extent your question is understandable as to why the options.(but its like asking why "Son" and "Sun" are pronounced the same???)
It is understood that all the actions of type "Immediate Processing" or "Processing when Saving" would have already processed during the transaction creation & save respectively.
If you want to repeat any of these in bulk, the program is a good tool for that.
Plus, all those that result in an error or arent processed, of course can be reexecuted from here as well.
So, all 3 options have their purpose within here.
For the ones with Selection report, unless you want to manually go into the ACTION MONITOR and execute, each time, a batch job is used, which takes care of such actions.
Regards,
Ashwin

Similar Messages

Unable to find consolidate field in Time off Process application

Hi All,
I create an aplllication for Time off process and unable to find "consolidate" field when selecting set up block parameters .I am using portals EP 7.0 Version
Could you please help me in getting this ...
Thanks ,
Nararaju.

Hi,
we group parameters so that the output of process actions is automatically entered as input .We can consolidate parameter at Action,block adn process levels
follow the below steps
1. Select your Seq Block and click on the tab "Parameters" at the bottom pane
2. Mark all the parameter (press ctrl for multiple ) and Click on Map
3. Supply the Name and say create
at last do a SavaAll
hope this will solve ur problem
cheers
souza

Image Sequences and Batch Processing: Can opening files from different folders as image sequences be set up as an action for batch processing?

I have an ongoing series of tasks that necessitates opening the contents of a series of folders as image sequences.
I'm used to setting up some fairly complex actions, including ones that are intended to be applied to all of the contents of materials in various subfolders, but for some reason I cannot get an Open-with-Image-Sequence-Checked action to set up in a way that will batch process correctly.
Complicating matters is that the file prefixes (i.e., the letters before the sequential numbers) and the folders will always have different names from the last time the process had to be carried out.
The steps I would like the action to carry out would be the following:
1. Open Subfolder 1 - that is, Photoshop shouldn't be looking for a specific folder. It's just *any* subfolder to the current parent folder.
2. Select first file in sequenced set of files.
3. Open as an image sequence.
4. Open Subfolder 2.
5. Select first file in sequenced set of files.
6. Open as an image sequence.
...rinse and repeat until Photoshop runs out of subfolders to check.
Am I asking the impossible?
Thanks!

I'll look around there, because I had posted something about this and was told to look here ps-scripts - Browse /Image Processor Pro/v3_0 at SourceForge.net
then this is the image here:
is the result I received. Granted I'm new to using scripts and actions for image processing large amounts of files.

Using actions and batch processing to maximize compatibility on old psd files

My apologies if this has been answered -- in my search I saw that it was asked multiple times, but not answered.
My goal is to be able to import 5 years of PSD files into Lightroom that were originally saved with maximize compatibility turned off. These files are in shoot folders within year folders.
I have been trying to do this with an action and batch processing through Bridge (Tools>PS>Batch). After switching preferences to MC=always, I have tried an action with a Save command, but that doesn't switch the file to max compat on. Save As does, but it also fixes the destination of the save in the action to a specific folder. I want to be able to overwrite the existing PSD file, leaving it where it is.
Has anyone successfully tackled this issue? I know I can handle it folder by folder, with an action for each folder, but that just wouldn't be cool.
Thank you

L Show - Yes, I found a way and did just that.
Everything as you wrote, using the save-as option. Yes, it will put the folder name into the action BUT it will override it when you run your batch from bridge IF you check in the box "override action save-as command" (and destination: save and close).
Works like a charm (although slow - not utilizing the multiple cores :( )

5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America

Step 5.
5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America, you can look up a local number here. For now, check out all the great free features of Creative Cloud! Get started with trials
I keep getting this.
The Bank and Paypal states that Adobe needs to process my transaction twice.
I have no order number/ no status nor contact from Adobe. I called customer service and he transferred me to sales where the phone rang with no answer.

Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

How to clear grey loading screen and animated gif (Dynamic Action with "Show Processing" on submit)

APEX V4.2.3
DB 11.2
I have a classic report on page 1. I have a region button called "Export" (defined by a submit dynamic action with "show processing=Yes") that submits the page and then via a branch directs me to page 2 which has a slightly different version of the report on page 1 (i.e. no breaks) which I want to capture as a CSV export. Therefore I've set the report template on page 2 to " Export:CSV".
Now when I click on the page 1 export button the grey screen and loading gif appears indicating that the report is executing and then as expected, page 2 doesn't appear but instead the standard open/save window's dialog box appears asking to open or save the generated CSV file. All good..but the grey loading screen remains. How do I clear this loading screen and get back to the context of page 1 ?
thanks in advance
PaulP

Hi PPlatt,
We would love to help but you left out one crucial part of the puzzle: namely how does your CSV report get exported. With the way it is setup (a redirect to another page), I'm going to assume you do that because you have some PL/SQL on that page that prints the CSV.
Now there are two questions that are crucial here:
- How do we stop the icon from bugging us on the screen
- How do we communicate with the browser that it should no longer display the loading icon
The first question is rather easy, two simply lines of codes can do that:
$('#apex_wait_popup').hide();
$('#apex_wait_overlay').hide();
But when do we use this code? Quite simple when the document is downloaded. When is it downloaded? At the end of the PL/SQL code that prints the document to the browser.
What you could do is at the end of that code give an application item a certain value. For example :AI_PRINTED := 'Y';
Then all you need to do is let the browser ask for the value. You could do this by using JavaScript to continuously fire AJAX to the server using a JS timing event:
http://www.w3schools.com/js/js_timing.asp
Better would be a Server send event, but since you left out another crucial piece of information: your browser, I will not go deeper into this.
Start this timing event when someone asks for the document, and end it as soon as the process returns that :AI_PRINTED equals 'Y'.
Despite the lack of information, I hope I have given, or at least inspired you to get to the solution.
Regards,
Joni

Background job is taking lot of time for processing the job.

One background job - which is processing Idocs is processing a job for more than 2000+ seconds.. and completed tho.
But this is happening for the past few days.. is there any way to trouble shoot, or find from any logs of this completed job, to find out why it was taking lot of time for processing.
Can you please tell me the steps of analyzing / trouble shooting why it was taking lot of time daily.
Regards,
Satish.

Hi Satish,
Run DB stat from db13 it will improve the performance.
Check number of idocs. You can send part by part, instead of sending huge data.
Check SM58 logs
Suman

Design Time for Processes and Forms

Hi experts,
When trying to open "Design Time for Processes and Forms" in order to create a process, I get a dump.
Could you let me know what could be wrong ? config? etc..
Hereunder is a sample of what I found in T.code ST22
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
    referenced node must exist
      READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
                 WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
>>>      ASSERT sy-subrc = 0.
    ENDIF.
provider has to be specified (except in case of recursion)
    IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
      ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
    ENDIF.
Thanks in advance,
Louis

note: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh.

Batch number coming automatically at the time of Process order release

Hi All,
I want the system generated batch number for header material to come automatically at the time of process order release.
At present ,the batch number is entered manualy dering process order creation.
Can anyone pls guide abt the settings required for the same

Dear,
Define the production scheduling profile CORY then
Auto Batch Creation = 2 On release.
Then assign this to your FG or SFG materials in work scheduling view in material msater MM02. Then create new order and check.
Now for automatic generation i have to set internal number asignment for batches.
Batch will create for movement type say 101 SPROLogistics - GeneralBatch mangment--Creation of New Batches --Define Batch Creation for Goods Movements. so it will have same logic in MM for 101 GR against PO will be internal number range but no effect in SD.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Mar 12, 2010 12:40 PM

How to keep waiting time between processed messages !!

Hi Folks,
I have got one scenario required waiting time between processed messages. The problem as follows !!
File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
Please I am expecting positive answer !!
Many Thanks in Advance
San

Hi Rudolf Yaskorski ,
Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
Kind Regards
San

JDBC look Up query taking more time to process

Hi all,
I am using JDBC Look Up in my project to retreive data from multiple tables.But the problem here is it is taking 10-12 minutes for processing the query which has around 770 records.So my question is there any way that i can reduce the time of processing query.
Ex:Select EmpId from EmpTable where EmpId>500 and EmpName="Arun"
Here I have 770 records and it is taking 12 minutes to retreive results.
Is there any database tuning technique that we can use in JDBC Look up in PI?
Thanks in Advance.
Regards,
Yeshwanth

>   I am using JDBC Look Up in my project to retrieve data from multiple tables.But the problem here is it is taking 10-12 minutes for processing the query which has around 770 records.So my question is there any way that i can reduce the time of processing query.
This is happening since you are executing the Query (Select F1 from tablename where segment1='X', segment2='Y',segment3='X1',segment4='Y1',segment5='X2',segment6='Y2') for each record. So, the execution is 770 times in your case, which means it is opening and closing DB Accessor channel 770 times which is basically causing performance.
Better pass all fields in one Context as input to JDBCLookUP UDF and logically iterate by opening only one DB accessor.
I am just providing a rough UDF code, so it might not work at first shot. Change it according to your requirement.
Note: UDF should be advanced in nature (context or Queue)
Sample Code
Channel channel = null;
Map rowMap = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
try
          //Determine a channel, as created in the Configuration
          channel = LookupService.getChannel("<BUSINESSYSTEM>","<CHANNELNAME>");// give your service and channel
          //Get a system accessor for the channel. As the call is being made to an DB, an DatabaseAccessor is obtained.
          accessor = LookupService.getDataBaseAccessor(channel);
catch (Exception e1)
     e1.printStackTrace();
for (i=0; i<a.length;i++ )
     //Query = "Select F1 from tablename where segment1='X', segment2='Y',segment3='X1',segment4='Y1',segment5='X2',segment6='Y2'";
     Query = "Select " + a<i> + " from tablename where segment1='X', segment2='Y',segment3='X1',segment4='Y1',segment5='X2',segment6='Y2'";
     try{
               resultSet = null;
               //Execute Query and get the values in resultset
               resultSet = accessor.execute(Query);
               for(Iterator rows = resultSet.getRows();rows.hasNext();)
                    rowMap = (Map)rows.next();
                    result.addValue((String)rowMap.get(a<i>)); //this statement might not be correct as your query is already fetching F1, so make some adjust in this statement accordingly
          catch(Exception e2)
               //result.addValue(ex.getMessage());
               e2.printStackTrace();
try{
          if (accessor!=null)
               accessor.close();
     catch(Exception e3)
          e3.printStackTrace();
Let us know the outcome.......
Regards,
Praveen Gujjeti.
Edited by: Praveen Gujjeti on Jun 29, 2010 10:38 PM

How to handle the One-Time Customer Process (Customizations - Master Datas)

How can we handle the processes of one time customers (for example sales from a store without a warranty process fort he products)? Iu2019m planning of creating a different sales document type and use a single customer number for all of the documents created. On the other hand SAP has a solution for the one-time customers but I donu2019t know its details. Can anybody explain me the standard one-time customer process of SAP (the needed customizations and the master datas to be created)?
Thanks in advance for the answers....

Hi..
the one-time customer is an account group (CPDA) that is used for "walk-in" or "cash" buyers. although this account group can be used for regular sales orders, this is intended to be used with the Cash Sales type of sales documents, where no accounts receivable is created. you also need the one-time customer as a "dummy" and avoid creating many customer masters for buyers who may only do one transaction with your company.
when you use the one-time customer account group in the Cash Sales order, you enter the one-time customer number in the sold-to party field. the system will then prompt you to enter the actual name (and address) of the buyer. you can have the option of generating SD reports with the real names of the customers.
you create the one-time customer the same way you do with the regular Sold-to party. there are some differences, in the sense that this is a "dummy" account. you do XD01 or VD01 to create the account, choosing account group CPDA. you also make entries in the sales areas.
Regds
MM

Create Adobe Form using Design Time for Processes and Forms

Hi all,
I am trying to create a form that have 3 fields:
1. pernr
2. ename
3. effective_date
I done all the necessary setup of BADI ,class, interface and form.
I need the step to step guide where you create the adobe form using the Design Time for Processes and Forms. Anyone have any idea?
Edited by: Siong Chao on Jan 3, 2011 4:54 AM
Edited by: Siong Chao on Jan 3, 2011 5:00 AM

Hi,
I couldn't get to your query..
What do you mean by step by step procedure for a design time & process for forms.
if you are a beginner and looking for basic examples to implement adobe forms there are lot of them in SDN, please search them.
let me know if your query was a very specific one.
Cheers,
Sai

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

I have just subscribed to Adobe Export and my debit card has been charged but I cannot convert a pdf into a word format on my mac. Does it take time to process? I have purchased the package about thirty minutes ago?

I have just subscribed to Adobe Export and my debit card has been charged but I cannot convert a pdf into a word format on my mac. Does it take time to process?

Hi nickel13,
What is the problem you are facing?
Is this happening with a single PDF file?
Regards,
Florence

Actions - Time of Processing

Similar Messages

Maybe you are looking for