Activate Accessibility Features for all users?

Is there a way to activate Accessibility Features for all users by editing a table on the Portal side?
EP6 SP2 and NW04S.
Thanks
Jean Seguin

Hi Jean,
not that I would know of. But you can easily write a small portal component which sets the accessibility level of all users to your preferred level.
The code snippet below should give you an idea of what I mean
IUserFactory userFactory = UMFactory.getUserFactory();
IUserSearchFilter filter = userFactoy.getUserSearchFilter();
ISearchResult result = userFactory.searchUsers(filter);
while (result.hasNext()){
  String userId = (String)result.next();
  IUserMaint user = userFactory.getMutableUser(userId);
  user.setAccessibilityLevel(IUser.SCREENREADER_ACCESSIBILITY_LEVEL);
  user.commit();
Best regards,
Martin

Similar Messages

  • URGENT : How to retrieve Last Accessed Timestamp for all Users in GRC

    Dear Experts,
    Please help me with this urgent request. Appreciate your help in advance.
    My client is trying to understand the usage of the GRC application and would like to know information regarding the Last Accesse Time for all users who have logged into the Oracle's Governance, Risk and Compliance applcaition.
    Thank You,
    Rakesh

    If you still need the solution,
    Have a callback on OnSubtaskUpdated in your BPEL. This call back will be called for any updates in parallel approval pattern.
    Thanks
    --Sreeny                                                                                                                                                                                                                                                                                                                                                                           

  • Do we have any third party FLEX component libraries to support accessibility feature for all the components(like: ViewStack, ToggleButtonBar, charts and etc..) ?

    I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
    and it takes lot of effort.
    So, I would like to use FLEX component libraries which provides accessibility support for all the component.
    Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
    Thanks in advance...

    There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
    [1] http://myfaces.apache.org/sandbox/securityContext.html
    [2] http://people.apache.org/builds/myfaces/nightly/

  • Access denied for all (most?) users in all site collections of web app

    Hi,
    I have a Sharepoint 2010 farm pre-SP1 (yes should be updated!) and for all site collections of a web app, all users are getting access denied.
    Now in my title I said "most?" because I have found one user in another office who does not have this issue. This web app/site collections also do not go through f5 or any proxies.
    Even if I add myself as a site collection admin via central admin, I get the same result. I've looked at everything, windows time on the server (not using kerberos), errors in event log (nothing), uls logs just say access denied (very helpful!), etc...
    I can try what's suggested at http://social.technet.microsoft.com/Forums/en-US/e66f1b09-605d-4546-a581-2a9283c238c0/access-denied-for-all-users-and-for-site-collections-owner?forum=sharepointgeneralprevious but when asking colleagues, there's been no
    changes, let alone with those accounts? I can do a get on the property tomorrow to find if there is a value set first, however.
    Any suggestions on this?

    Hi,
    Please try logging in the site with farm account.
    If it works, please make sure you have superuser and superreader accounts in CA > Application management > web application policy. If not, please add both accounts with the powershell script in the article below, this can cause all users denied when
    access the site:
    http://technet.microsoft.com/en-us/library/ff758656.aspx
    Here is a similar thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/a49b1ab8-273f-41e4-a0b8-be0e31c6733b/all-users-including-site-collection-admins-receiving-access-denied-from-one-site-collection?forum=sharepointadminprevious
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected] .
    Rebecca Tu
    TechNet Community Support

  • How do I disable the itunes auto-update for all users?

    I need to know if there is a way to disable the auto-update feature for all users that login to a windows XP computer.
    I have disabled it for the account currently logged in as well as copy that user profile to the "default user" profile. However I have about 300 users that do not have admin rights that still get prompted to install updates.
    Is there a way to disable the auto update as the default for all users. So that only I get the auto update notifications?

    Bump -
    No responses in over a week?
    Does no one else run a network where users don't have admin rights?

  • HELP needed on Remote Management set to allow access for all users

    my mac mini snow leopard server runs in a data center and i use screen sharing to interact with it. i played with the sharing settings remotely yesterday and changed "allow access for" to all users. i was disconnected immediately and i couldn't logon again. i have no luck changing to other users. i don't want to make a special trip to the center to change it back to whatever it used to be. i can still use afp to connect but the screen sharing option is no longer available. what does "allow access for all users" mean anyway?
    thanks!

    As its name implies, allow access for all should allow any valid user account to access the server. I'm not sure why it's no longer working. It almost sounds like the ARDAgent crashed.
    Either way there's a command-line interface to the ARD preferences:
    /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/ki ckstart
    man kickstart discusses the options, including examples of how to enable access for specific users.

  • [All Platforms][Playlists] Feature for normal user to customize playlist cover

    Hello spotfiy commuity!  I saw a post about this a cople of years back, but I feel like its time to revisit the subject.  I have always wanted a feature that enabled me to choose a custom playlist cover photo. This would make my playlist even more personal. I always wonder why this wasn't a feature, I thought that it could be legal issues with the pictures, but just resently spotify released the "Discover weekly" that is absolutely amazing! On the playlist they use your facebook picture as the playlist cover. So it can't be legal issues? One can use anything as a facebook photo (No copy rights needed).  I know this is a feature for records companys or larger playlist and so on. I can understand that its limited to partners, but I don't think it would do any harm to add this feature for regular users aswell?  All I really want is an reason why this isn't a feature for normal users :)   

    Updated: 2015-08-03Hi and thanks for your contribution! Any announcements about this potential feature will be announced in this thread:
    https://community.spotify.com/t5/Live-Ideas/Customization-of-playlists-cover-and-description-box/idi-p/211048
    Add your kudos and comments there please!

  • Activate plugins for all users on a web-site

    Hello,
    Is there a way to activate or whitelist plugins for a specific web-site, for all users on a Windows computer? Each time a user logs in and visits the site, they have to click three prompts to enable content. Aside from being annoying, most folks aren't that tech-savvy to understand what is going on and that they need to do it. All they want is for their content to run in the browser.
    Thanks

    There are plugin.state prefs for each plugin.
    *plugin.state (0:Never Activate; 1:Ask to Activate; 2:Always Activate)
    You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
    Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
    pref("general.config.filename", "mozilla.cfg");
    pref("general.config.obscure_value", 0);
    These functions can be used in the mozilla.cfg file:
    defaultPref(); // set new default value
    pref(); // set pref, allow changes in current session
    lockPref(); // lock pref, disallow changes
    See:
    *http://kb.mozillazine.org/Locking_preferences
    *http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
    *http://mike.kaply.com/2014/01/08/can-firefox-do-this/

  • How can I install and activate extensions for all users

    Hi, within the version 7.0.1 I am able to install noscript extension for example for all users.
    With version 8.0 the extensions are disabled by default, so I do not install it on company computers.
    How can I manage extensions and settings for all users in 9.0?
    Best regards
    Jens

    Hi John,
    I appreciate your prompt response.
    We have an Australian client here in the Philippines and would want to purchase an adobe software under Creative Cloud Licensing.
    Since this type of licensing is not yet available here in the Philippines, they are suggesting that they can purchase it in their country.
    My main concern is, will there be any conflict upon installing/activating an adobe software under Creative Cloud which will be purchased from their country?
    And what are the steps for installing and activating a software under this type of license.

  • Silent install of SQL Server 2008r2 for ALL users?

    We ship an installer that does a silent install of SQL Server 2008r2 with all the 'right' parameters pre-configured. We use this:
    /QS /INSTANCENAME=MSSQLSERVER /ACTION=Install /FEATURES=SQL,BC,Conn,ADV_SSMS /SAPWD=MyPasswordGoesHere /SECURITYMODE=SQL /TCPENABLED=1 /ADDCURRENTUSERASSQLADMIN /SQLSVCSTARTUPTYPE=Automatic /SQLSVCACCOUNT="NT AUTHORITY\SYSTEM" /AGTSVCACCOUNT="NT
    AUTHORITY\SYSTEM" /IACCEPTSQLSERVERLICENSETERMS
    However, the problem is that if a tech installs it for another user, that user does not have access, since ADDCURRENTUSERASSQLADMIN flag only adds the user who installed it -- rather than adding ALL users on the computer. (Or at least all admins.)
    I tried replacing ADDCURRENTUSERASSQLADMIN with this:
    /SQLSYSADMINACCOUNTS="BUILTIN\ADMINISTRATORS"
    but that also failed to work. How can we install for all users, or at least all administrators?
    NOTE: we do NOT know the name of the computer or the users. The installer has to work for any computer setup.
    Similar question has already been asked, but wasn't helpful:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8354675f-be9b-4909-b776-942f03954807/how-to-do-a-silent-install-of-sql-2010-express-for-all-users-on-a-computer?forum=sqlexpress
    The documentation does not make it clear what you can pass as allowed SQLSYSADMINACCOUNTS parameters. I also am not sure if I would need to change the AGTSVCACCOUNT or SQLSVCACCOUNT?

    I tried one more thing:
    /SQLSYSADMINACCOUNTS="BUILTIN\Administrators"
    which does not halt installation with an error. 
    However, doing:
    osql -E
    create database test
    go
    in a command prompt from a different admin user on the same machine results in a permissions error... but works if done from a command prompt on the user account from which MSSQLServer was installed.
    So for some reason /SQLSYSADMINACCOUNTS="BUILTIN\Administrators" does not work as expected.
    Anyone have any idea why?
    I checked the output log from the install, and found it had generated and used a configurationFIle to do the install. I looked in that file, and these were the settings, even though I did NOT pass /ADDCURRENTUSERASSQLADMIN as a command line option:
    ; Windows account(s) to provision as SQL Server system administrators. 
    SQLSYSADMINACCOUNTS="BUILTIN\Administrators"
    ; The default is Windows Authentication. Use "SQL" for Mixed Mode Authentication. 
    SECURITYMODE="SQL"
    ; Provision current user as a Database Engine system administrator for SQL Server 2008 R2 Express. 
    ADDCURRENTUSERASSQLADMIN="True"

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation

    Hi all
    Have seen a couple threads regarding this but unfortunately nothing that solves my problem thus far!
    Right now, our developers are using the Domain Admin account to promote their website code using MSI files.  I'd like to change this as I feel the Domain Admin account should be on lock down and only used when absolutely necessary, pretty common.  The
    same goes for my account too, I would like to absolve as much use of the Domain Admin as I can.
    Problem is, when they run installers from their own accounts, they receive this error: You do not have sufficient privileges
    to complete this installation for all users of the machine. Log on as administrator and then retry this installation
    The accounts they are using are part of the Built In Administrators group and the Domain Admins group... I'm not sure what other permission you'd need in a domain?  We've gone as far as explicitly giving them local admin access on this server and still
    nothing changes.
    Is there a Group Policy or something that I can change to provide install rights and possibly remove these accounts as Domain Admin and more along the line of Power User?
    Thanks much for your help!
    Ryan

    Hi,
    You could use Software Restriction Policies (SRP’s) or Applocker(supported on Windows server 2008 R2/Windows 7 only) to restrict the running
    of the application for specific user.
    Description of the Software Restriction Policies
    http://support.microsoft.com/kb/310791
    HOW TO: Restrict Users from Running Specific Windows Programs
    http://support.microsoft.com/kb/323525
    How to Implement Group Policy Security Filtering
    http://www.windowsnetworking.com/articles_tutorials/Group-Policy-Security-Filtering.htmlPlease remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Setting Crystalviewer for all users in CMC

    I am trying to setup Crystal Reports server 2008 VI for my organization. One of the requirement is to disable the Preferences in inoview and set the crystal report viewer to the Web ActiveX control for all users. I was able to disable the preference parameter in CMC -> Allications -> InfoView, but could not find away to set the default viewer for all InfoView users to the activeX control? Is this doable? If so I would like to know how.
    Any help is greatly appreciated.

    Enable preferences and go to Infoview, click oh Preferences and change the view format to ActiveX and save it. Do this for Administrator users.
    There is download available, using that you can make the same change for all users, check the below link.
    Re: Setting the same "InfoView Start Page" to all users in one group
    With that you can change the settings for all users as Administrator, once done remove the access to Preferences.
    Thanks,
    Hari

  • Read-Only cell for all users

    Hi,
    We're running an 11.1.1.2 Planning application.  A member in the Account dimension is read-only for all users including the Admin account.
    The member is read only when accessed through a Data Form or through Smart View.
    We addressing the Account dimension at level 0 on the data form.
    The member is not Dynamic.
    The member is only locked for EUR and GBP currencies.
    The member has previously been moved to a new location in the Account dimension however we have run multiple database refreshes since the move.
    Let me know if you need any more info.  Any help which can be provided would be greatly appreciated.
    Thanks
    Jim

    Hyperion Planning and More...: Why My Data Form is Still Read Only...!!!
    See if any of the points mentioned here is any help.
    Cheers..
    Rahul S.

  • Adding a domain user to the admin role within the local user management breaks all metro apps for all users!!

    Hi,
    I have posted this in another large thread under the "Windows 8 General" group but have not had any appropriate feedback from MS.
    After hours of testing and working with other users I have managed to isolate a simple situation that breaks all metro ui applications within Windows 8 for all users on the machine. Here are my exact steps and notes.
    Before continuing if you are running Avast then your solution may be to turn of the behaviour shield functionality as this also breaks metro apps. This is NOT the problem we are having!
    I have performed 3 cleans installs after isolating the problem and am able to reproduce the issue every time using the same steps on two different machines. 
    First thing to say is that for us it has nothing to do with simply joining the domain, domain/group policies nor does it appear to have anything to do with the software we installed, the problem here is much more simple but the result is pretty terrible.
    Here are my exact steps of what I did to reproduce our problem:
    Complete format of HDD in preperation for a clean install
    Clean install performed
    Set up the machine initially with a local account
    Test metro apps - all working fine
    Open control panel from the desktop, click on System, change the system to join the domain, click reboot
    Log into the system using my domain account
    Test metro apps - all working fine
    Here's were the problem starts. I need my domain account to have admin rights on the local machine so I can install programs without the IT men having to come over and enter their password every 5 mins.
    I go to control panel via the desktop and click on User Accounts. From with here I then click on "Manage User Accounts". This requires the IT guys to enter their details to give me access to such functionality. This is fine
    In the dialog box that opens I can only see the local user that was initially created during setup. The "Group" for this local account shows as "Administrators" - Image included below (important to note that metro apps are working at this point)
    I click add and then add my domain account - also giving it administrator access
    Sign off or reboot to ensure the new security is applied
    Sign back in to the domain account
    Test metro - ALL BROKEN
    Sign out
    Sign in as local account
    Test Metro - NOW ALL BROKEN FOR THIS USER ALSO
    So as soon as I add my domain account to the local user accounts and set it as admin it breaks all metro apps for all users. This is on a totally clean install with nothing at all installed other than the OS.
    Annoyingly if I go back and change the domain account to a standard user or if I totally remove the domain account from the local account management system the problem does not go away for either user. basically it is now permanently broken. The only fix I
    could fathom was a full re install and not giving the domain user admin access to the local  machine.
    Screen one - this is the local user accounts window AFTER joining the domain and logging in with my domain account (All metro apps working at this point)
    Screen 2: User accounts AFTER joining the domain and AFTER adding domain account to local user management (METRO BROKEN)
    I have isolated my machine from all group policies so nothing like that is affecting me. Users I have spoken to in different companies have policies that automatically add users to the local user management. This means that metro apps break as
    soon as they join the domain which leads them to wrongly think it is group policies causing the error. Once they isolate themselves from this they can reproduce following my steps.
    Thanks

    Hi Juke,
    Thank you for the response and apologies for the delay in getting back to you. My machine was running a long task so I couldn't try your suggested solution.
    I had already tried running the registry merge suggested at the top of the thread to no avail. I had not tried deleting the OLE key totally so I did that and the problem still exists. I will post all the errors I see in event viewer below. For
    your info, since posting my initial comment I have sent out my steps to 7 different people and we can all reproduce the problem. This comes to 10 different machines (3 of them mine then the other guys) in 3 different businesses / domains. We see the same errors
    in event viewer.
    Under "Windows Logs" --> "Application" : I get two separate error events the first reads "Activation of app winstore_cw5n1h2txyewy!Windows.Store failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional
    information." The second arrives in the log about 15 seconds after the first and reads "App winstore_cw5n1h2txyewy!Windows.Store did not launch within its allotted time."
    Under "Windows Logs" --> "System" : I get one error that reads "The server Windows.Store did not register with DCOM within the required timeout."
    Under "Applications And Services Logs" --> "Microsoft" -->  "Windows" --> "Apps" --> "Microsoft-Windows-TWinUI/Operational" : I get one error that reads "Activation of the app winstore_cw5n1h2txyewy!Windows.Store for the
    Windows.Launch contract failed with error: The app didn't start."
    If you require any further information just let me know and I will provide as much as I can.
    Thanks

Maybe you are looking for

  • How can I sync 2 computers with the same iTunes library?

    I have an iMac and a MBP, and I want to keep my iTunes library the same on both machines.  Is there an easy way to do this? Thanks!

  • I want to cache all files in my web server for JRE auto installation

    Hi, I have written an application for my customer. When they access my web server, they will auto-install jre 6.12 and then load my application using jnlp. All that is done, but i want to improve in the following ways: 1. I want to have more quiet in

  • Disable Inheritance on folder - Full permissions unable to rename

    I've got a document library with a couple folders inside. One of the folders I've disabled the inheritance of permission and provided a test user full control of the folder. They can add/delete files inside the folder but they're not able to rename t

  • Export error - oracle 9i in windows server

    One of my export started giving error (it was working fine before but now it is giving error). Error is "LRM-00112: multiple values not allowed for parameter 'log' EXP-00019: failed to process parameters, type 'EXP HELP=Y' for help EXP-00000: Export

  • DB LINK to external Database

    hi mates, i need access to a view running on another database server. i configured my db link and tried to compile the view. but the following message occurs: ora-12154: TNS: Connection Identifier.... any ideas.. would be great!