Activate overwriting exit after note

Hi guys.
I wanna create an overwrite exit in standard FITV_VC_COST_ASSIGNMENT webdynpro component, but it seems not be possible. I set the overwrite exit in the componentcontroller, in the COST_***_GET method. I already had set exits in componentcontroller methods, working fine, but it doesnt. Firstly, I set my exit, but when I noted it was not taken into account by the system, I realized the componentcontroller was inactive. Someone else had set a note and he/she did not activate. When I asked for activation, the owner of the user responsible for the note activated in mandant 100. But I develop in 105, so she did the same with it. Since I do my tests in 115, I asked her activate at 115 too. But even so my code at pre, post and overwrite exits in this componentcontroller are not working. The enhacement workbench is fine, but the effect is null. I erased the exits and deleted my enhancement implementation and created anothers over the same standard method, but the result is negative. My code at these exits is "jumped" and only the standard code of the method is executed.
What i should do? Capitulate? I know that there are more mandants in the system at the same level (DEV, not QAS). Should the responsible user that put the note activate in all the mandants? Does anyone know what is happening here? Thank you

Hi guys.
Inside the standard method, there was a call to another method. I used an enhancement point in that method, because it was imposible to enhance the standard web dynpro component. I am not sure why.

Similar Messages

Overwrite-exit not possible in view controller

Hi all,
Within a standard abap webdynpro application I see two columns for pre-exit and post-exit within the methods tab. I can't see a column for the overwrite-exit. Within transaction SE24 I can see all three columns.
Does someone have an idea why the overwrite-exit is not visible within the webdynpro component?
Thanks,
Richard

I found it myself. The overwrite-exit is only possible in enhancement pack 1 (7.01). We are still on 7.0.
Kind regards,
Richard

Customer exit is not functioning after ECC upgrade/support package

It seems our customer exit is not functioning after ECC upgrade/support package. I tried to activate the project again, no use. please help. Thanks! (see below for the enhancement info)
COZF0002 Change purchase req. for externally procured component
EXIT_SAPLCOZF_002
INCLUDE ZXCOZU02
*& Include           ZXCOZU02
CONSTANTS: lcc_eban(25)   TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban>   TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
    SELECT SINGLE fkstl INTO l_fkstl FROM prps
      WHERE pspnr = caufvd_imp-pspel.
    IF ( sy-subrc = 0 ).
      WRITE l_fkstl TO <fs_eban>-zzfistl.
    ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
    WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Did you mean set a break point in the follow code?(Include ZXCOZU02), I tried set a break point in this code, but It didn't stop .
*& Include ZXCOZU02
CONSTANTS: lcc_eban(25) TYPE c VALUE '(SAPLCOBC)EBAN'.
FIELD-SYMBOLS: <fs_eban> TYPE eban.
DATA: l_fkstl TYPE prps-fkstl.
Move values from the LUW to the Internal Table
ASSIGN (lcc_eban) TO <fs_eban>.
If the field symbol is "NOT' empty then proceed
IF ( <fs_eban> IS ASSIGNED ).
if WBS work order, get cost center from PRPS
IF ( caufvd_imp-auart = 'ZM05' ).
SELECT SINGLE fkstl INTO l_fkstl FROM prps
WHERE pspnr = caufvd_imp-pspel.
IF ( sy-subrc = 0 ).
WRITE l_fkstl TO <fs_eban>-zzfistl.
ENDIF.
if not WBS WO, move cost center minus leading zeros to funds center
ELSE.
WRITE caufvd_imp-kostl TO <fs_eban>-zzfistl.
ENDIF.
ENDIF.

Not able to activate Java even after clicking "allow and remember"

Hi,
After opening a website in Mozilla Firefox it shows "Activate Java(TM) Platform SE 7 U. This plugin has security vulnerabilities" and after clicking "allow and remember in red plugin icon in the address bar" the website closes automatically. Again after opening the same website the same problem exists - Not able to activate java.
After opening the same website in Google Chrome "Java(TM) Platform SE 7 U21 has crashed." - this message appears.
Please and Kindly help me solving this problem so that Im able to open the website.
Thanks & Regards,
Akansha.

You appear to have a very old version of Java installed - '''''Next Generation Java Plug-in 10.21.2 for Mozilla browsers '''''. It is shown in the Plugins submitted with your original question (click ''Question Details > More System Details'' to the right of your original question). That is Java 7u21, the current version is Java 7u45.
*All Java 7 updates (versions) prior to u45 have been blocked due to security issues - https://addons.mozilla.org/en-US/firefox/blocked/p458
*You can scroll down or use Find (Ctrl+F) to find Java versions that have been blocked on this list - https://addons.mozilla.org/en-US/firefox/blocked/
There are several methods to update Java. I recommend that you update by either 1 or 2 below:
#download, SAVE to your hard drive, close all browsers, run the updater, uncheck items that you do not want installed (if offered), then open Firefox and test.
#*Download link - http://www.oracle.com/technetwork/java/javase/downloads/index.html '''''(scroll down a bit and download the '''''JRE''''' version in the 3rd column)'''''
#*Test Java - https://www.java.com/en/download/installed.jsp
#You can also update using Windows Control Panel > Update
Your are also 2 full revisions behind on Shockwave Flash 11 (aka, Flash or Flashplayer). You System Details with you question indicate that you are using Shockwave Flash 11.7 r700 ### which contains security issues; current version is Shockwave Flash 11.9.900.152.
*Read and follow the instruction in these articles to update Flash
**https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
**https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games
You are using Firefox 25.0; Firefox 25.0.1 was released November 15, 2013. Follow the instructions to update below and read the release notes to see what changed.
*Update Firefox - https://support.mozilla.org/en-US/kb/update-firefox-latest-version
*Release notes Firefox 25.0.1 - https://www.mozilla.org/en-US/firefox/25.0.1/releasenotes/

I have installed Adobe Photoshop CS (original 2003 2004 version) on my new Windows PC. I have been unable to activate it and the note says it will expire after 29 days. What can I do to activate it?

I have installed Adobe Photoshop CS (original 2003 2004 version) on my new Windows PC. I have been unable to activate it and the note says it will expire after 29 days. What can I do to activate it?

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

I CANNOT ACTIVATE MY ILLUSTRATOR AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.

I CANNOT ACTIVATE MY ILLUSTRATOR AFTER FIXING MY COMPUTER. IT SAIS THAT I AM NOT CONNECTED TO INTERNET BUT I AM. IS THERE ANYBODY WHO CAN HELP.

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I earesed my iphone 4s and reset it so they ask me to activate my phone, after puting my username and password they told it's not correct

i earesed my iphone 4s, and reset it ,so they ask me to activate my phone, after puting my username and password they told it's not correct.

Did you purchase this phone new or second hand.
If second hand you probably ran into this Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support
you will need the original owners info. Find My iPhone Activation Lock - Apple Support

TS4002 I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

I can not activate my iphone after running the software for icloud account not remember, I wish abble to open my computer soon. My phone IMEI 013007007033970

Hi nguyen trong thang,
I apologize, I'm a bit unclear on the exact nature of your issue. If you are saying that you are having issues activating your iPhone, you may find the troubleshooting steps in the following article helpful:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Regards,
- Brenden

I could not activate the phone after updating software to iOS7.

Dear Apple Support team.
Please help to investigate the problem as I could not activate the phone after updating software to iOS7. in the phone the erroe message is "Your iPhone could not be activated because the actiovation server cannot reached. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes.
I have try to activate both of way such by WiFi & Cellular activation and connecting with iTunes but still face the problem and could not completed activation the phone.
How do i activate the phone or have to wait for hour not couple min as you suggested.
your feedback quickly would be appreciated.
Thank You
Kritpas

There is nothing you can do. That is the Activation Lock that Apple has implemented tout down on theft of their iPhones.
Most likely the iPhone is stolen.
It is totally worthless to you.

Someone changed my icloud login password, and I can not activate the iPhone after recovery

someone changed my itslud login password, and I can not activate the iPhone after
recovery

You could try to reset your password via a webbrowser here: https://appleid.apple.com

Error message while creating Overwrite exit for a standard class method.

Hi,
I was trying to create an overwrite exit in class CL_HRTMC_AC_TA_DASHBOARD for method GET_DEVPLAN_ASSESSMENTS. I created an Enhancement Implementation first. But when I tried to insert Overwrite exit method, I got error message that "The class has not yet been converted to the new class-local types" . In the toolbar->Utilities, I saw an option "Convert Class-local types" and when I clicked that it asked for the Access key. Eventhough I cancelled the process, now I am seeing some inactive parts in from this class in my Inactive object list. When I try to activate, it's again asking for access key and not able to activate it. Not sure what has actually happened. Is it possible to revert it to old form? Please advice!
Thanks,
Mahesh Nair.

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

Miro user exit does not hits

Hi ALL,
   i have implenented   LMR1M001---- EXIT_SAPLMRMP_010 user exit, but while miro it does not   hit expression:
I put break-point in EXIT_SAPLMRMP_010- ZXM08U16.
I have created project in following way.
In tcode CMOD create project ZMIRO.
In enhancement assigment   create LMR1M001.
In exit EXIT_SAPLMRMP_010-ZXM08U16.
I write code.
and activated both project and include.
and i set debug mode active.
But while running miro. it does not hit:
In miro i am doing following operation.
      select subsequent debit.
     In Basic data tab i insert
date.
    In Detail tab i insert Un
planned delevery cose
    Insert
Purchase order no.
And press Enter.
    After Pressing
enter, It exutue directly without calling user exit.
Please help me,
Thanks,

Hi,
May be this exit is not called for your scenario or the condition to trigger that exit may not have met.
Just activate your SQL Trace and then run MIRO. Just check in the tace log whether your exit is called. Else you may use another one.
Regards,
Renjith Michael.

User exit does not trigger

hai,
I have a user exit named MWMTO001.
It has been given like this will trigger at the end of the transfer order creation (Update task). wt i have done here is i activated the user-exit and when i try to create the TO its not getting stopped over the user-exit and here i didn't understand wt is mean by update task.
thanks in advance
regards
Swetha Singh

Hi Swetha,
After activating the function module exit we have to include the enhancement package in a project though transaction cmod.
You create a project and add the enhancement to the enhancement assignments of the project and activate it. ensure a green light box will appear next to the components.
If this is not the reason you can go to debug mode at runtime by /h and create a runtime breakpoint at statement 'Call customer-function' and see if the program stops at the any customer exit or not and if it includes the one you have created.
You will press /h on the screen from where you will move to the final screen where you need your exit to trigger.
hope this helps.
<b>Always reward points to useful suggestions.</b>
regards,
Vikas

I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

I purchased Adobe Acrobat XI Pro - Student and Teacher Edition but cannot activate it even after it has deactivated and replaced my old Acrobat 8. How do I get a serial number and activate the product?

I have the same problem. Have paid. Messages say I have downloaded it but the file is inaccessible apparently download is somewhere on my hard disk. How do I find it?? Is there not help at an Adobe phone service. If so what is the number to call??
Roger Broughton

I cant activate my iPhone after updating to ios 7.1.2

Hello,
I cant activate my iphone after updating to 7.1.2. Before this I update my iPhone from 7.0.6 to 7.1.1 everything goes fine. But after update to 7.1.2 I cant activate my iPhone eventhough I use the same Apple ID when I activate this iPhone.
Please dont ask : Maybe you forgot your Apple ID password? - I use my apple ID almost for 3 years for my iPod n iPhone. And it still fine for my iPod.the
I have : -
1. A box with same IMEI serial number.
2. Service Card with same IMEI serial number.
3. All original accessories that come with this iPhone.
This is just a prove that this iPhone is not a stolen iPhone.

After updating the firmware on IOS7 I can not activate my iPhone 4. ITunes says "Unlock the iPhone on this ***** @ *******. ru impossible" The server is not overloaded, the connection is good...

Activate overwriting exit after note

Similar Messages

Maybe you are looking for