Activating a network connection if needed

Is it possible for a Java application to check whether a network connection (LAN, dialup, ADSL...) exists, and, if it doesn't, to activate it, possibly choosing the default one ?

Java can do anything.
You will probably need to use Runtime.exec() or even JNI to achieve that functionality though. The only time that wouldn't be the case is is the system is set up to automatically connect when it gets a request like a DNS lookup.

Similar Messages

  • [SOLVED] Network connection issues - need to make connections twice

    I've a strange issue with my network connection that has recently started to appear where if I:
    - Attempt to install a package with pacman.
    - Visit a webpage in chromium.
    - FTP a file using Thunar.
    - SSH into a server.
    Then I quite often have to attempt the connection twice i.e:
    - Pacman will return "error: failed retrieving file" on a first attempt, but be fine on the second.
    - Chromium (or any other browser) will partially load pages or will show a 'Server Not Found' message on the first attempt but be OK after a refresh.
    - FTP will not resolve the server on the first attempt but will on the second.
    - ssh will return  "Could not resolve hostname Name or service not known" on the first attempt then be fine on the second.
    This issue just used to occur with pacman & ssh and I just put it down to 'one of those things I needed to fix when I had time'. Yet the issue has recently started occuring with chromium as well so is making browsing the web a real pain.
    I'm at a bit of a loss as to how to track down the issue so would appreciate any tips!
    I'm using netctl to connect over wifi & just as I tried to post this message an error appeared in Chromium which may give me some hints as to how to fix this:
    The server at bbs.archlinux.org can't be found because the DNS look-up failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Chromium from accessing the network.
    I'm using netcl to connect over wifi.
    I also recently installed dhcpd which I occasionally start and stop though the issue with pacman & ssh was occurring before this.
    Thanks
    Tom
    Last edited by anthillsocial (2013-10-14 10:28:48)

    Thanks for that Strike0. It prompted a thorough reading of a number of man pages, though while I 'think' I understand the general concept of how things should be working, I'm finding the configuration confusing!!
    I created and added some nameserver settings to the following config file '/etc/resolv.conf.head'  (googles 8.8.8.8 and 8.8.4.4 also work):
    $ vim /etc/resolv.conf.head
    # OpenDNS servers
    nameserver 208.67.222.222
    nameserver 208.67.220.220
    Then I reload  /etc/resolv.conf and view its new content:
    $ resolvconf -u;cat /etc/resolv.conf
    # Generated by resolvconf
    # OpenDNS servers
    nameserver 208.67.222.222
    nameserver 208.67.220.220
    domain home
    nameserver 192.168.1.254
    And this seems to make everything work, where network connection are being reached after the first attempt!!
    Though I'm confused why 192.168.1.254 is being used? Am I right in understanding that 192.168.1.254 is a broadcast address so all network devices on 192.168.1.* are being queried for a DNS server? If I use the host command on 192.168.1.254 it seems to fail.  Does this fail mean that my home router is not working correctly or theres' an internal config issue?
    $ host www.archlinux.org 192.168.1.254
    Using domain server:
    Name: 192.168.1.254
    Address: 192.168.1.254#53
    Aliases:
    www.archlinux.org is an alias for gudrun.archlinux.org.
    gudrun.archlinux.org has address 66.211.214.131
    Host gudrun.archlinux.org.home not found: 2(SERVFAIL)
    What does the "Host gudrun.archlinux.org.home not found: 2(SERVFAIL)" output mean? Where is it getting the .home name from?
    As comparison
    $ host www.archlinux.org 8.8.4.4
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    www.archlinux.org is an alias for gudrun.archlinux.org.
    gudrun.archlinux.org has address 66.211.214.131
    In one of the man pages I saw that you can test an internal DNS with:
    $ host www.archlinux.org 127.0.0.1
    ;; connection timed out; no servers could be reached
    Though wouldn't a dhcpd4.service need to be running for that to work?
    Lots of questions I know, but I would like to understand exactly what's happening so I can easily trouble shoot in the future.
    Tom
    Last edited by anthillsocial (2013-10-11 13:55:30)

  • Airport Express! wireless network connection promp need Help!

    First time user cant hook up to my wireless network just bought airport express to extend my my network but I keep on get an error say that my wireless network connection is valid any help anyone please on the brink of giving up!

    Hi, yonhtna. Welcome to the forums!
    Would you mind answering a few questions? I need a little more information about your network setup and about the exact nature of the problem.
    1) What type of router is your main router?
    2) Do you plan on using the Express to extend the range of your network, or are you only going to be using it for AirTunes or printer sharing?
    3) When and where do you see the error message? If possible, can you provide the exact wording?
    4) Is AirPort Utility able to find the Express?

  • HT5934 after downloading iso7 my imessage and FaceTime will not activate.  it says to sign in with apple id then after trying to do that imassage says could not sign in please check network connection. i need message!! can anyone help?

    After downloadinf iso 7 my imessage and facetime will not activate.  It says to sign in using itunes password then when I try  imessage says it could not sign in please check network connection.  My network says its connected??????

    see if this helps
    http://support.apple.com/kb/TS4268
    Peace, Clyde

  • WPA2 University's WIFi Network Connection. Need He...

    Hello, I am trying to connect ot my university's WIFi network form my 5800. These are the deatils provided by my uni. I tried many times to connect to their network without any luck. Could you please help me to setup my 5800.
    Network name or SSID: AccessKings (Important note: The name is case sensitive.)
    Network authentication: WPA2
    Encryption: AES
    Protocol for 802.1X authentication: Protected EAP (PEAP)
    PEAP properties:
    Validate the server's certificate: Yes (The certificate is issued to radius.kcl.ac.uk)
    Authentication method: EAP-MSCHAPV2
    PEAP outer identity: Leave blank
    Username or identity: Your King’s username, e.g. rsvp1234
    Password: Your King's password
    Domain: Leave blank
    Could you please help me to setup my 5800.
    Thanks.

    @kintesh
    Have you seen this thread?
    /t5/Connectivity/Nokia-5800-mschapv2-Support/m-p/4​30134/message-uid/430134/highlight/true#U430134
    Happy to have helped forum with a Support Ratio = 42.5

  • TS4123 I cannot connect to ITunes store from Windows Vista.  Get unknown error (0x80092013) message but am network connected.  Diagnostics say not administrator, but am.  No LSP.  HELP!

    Network connection IS active.  Network connectivity test confirms, but shows Secure link to ITunes store failed.  Tried help from diagnostics but get message that help is unavailable because computer isn't connected to internet (but it is).  Diagnostic details show current user is not administrator (but is).  Details show basic connection to the store failed.  Tried all the "helps"/solutions I could find--  ie flush dns, No LSP except Bonjour, firewalls, etc. and still can't connect.  What can I do????

    Must have Admin password for the OS system to know you are Admin -
    that error is known for eventually having to either
    1 Unintall reinstall itune or
    2 Reinstall Windows

  • Time Cap network connection to laser printer not seen

    after giving up on connecting my HP Laser printer (2420dn) via USB to TC (like I used to do), looked on back of 2420 and found network port (with associated netcard blinking lights) so ran a cable from printer port to TC.  Turned on printer and attempted to add printer, with no luck.
    Will admit that am clueless in network connecting, so need help please from anyone willing to aid me
    My iMac is now running 10.8.1 and I have a 3rd gen TC
    The 2420 is no longer supported by HP and it seems that Apple is no longer "training" its AppleCare phone support staff in network connectivity so they were also unable to help
    Thanks a million!

    OK, this should be relatively easy.
    The printer might be setup for dhcp on ethernet.. just check the display on the printer.. the IP should be available or it will be printed on the test pages. If the printer has not been setup it might show 192.0.0.192 or some weird IP like that. Grab the printer manual and cycle through the options on the printer to set the IP.. and change it to dhcp. If it shows correct ip like 10.0.1.100 then you are fine.. no need to worry.
    All later HP printers have http web access to the network setup.. so open your browser and simply type in the IP address. Tell me if that works. Check the name of the printer.. perhaps change it to something easy.. HP2420 might be nice.
    There is no setup for you to do on the TC.. a network printer is providing its own network access.
    Then just open the printer preference on the computer and check for network printer.. it should automagically find the HP.
    I am sure if you google around you will find some nice explanation with youtube video of the process.

  • Make sure your network settings are correct and your network connection is active, or try again later; Have been trying to fix for ages.

    Hi Everyone, been struggling all day to restore my settings on my ipod, as my little brother has put a restriction password in place and made me not able to get into Safari, iTunes, Camera which I really need. I have tried everything, resetting my proxy settings, turning off the firewall, changing my network location, ran diagnostics. Everything seems fine on that, I post below my results. I also tried restoring from the device, but with the restrictions code in place I can not do so. And everytime I am dowloading the software update before the restore it comes up with 'Make sure your network settings are correct and your network connection is active, or try again later'. I have been using google for ages and am not sure what I have missed.
    I am using Windows 7 with an Acer Notebook.
    DIAGNOSTICS:
    Microsoft Windows 7 Enterprise Edition Service Pack 1 (Build 7601)
    Acer Aspire One 753
    iTunes 11.0.2.26
    QuickTime 7.7.3
    FairPlay 2.3.31
    Apple Application Support 2.3.3
    iPod Updater Library 10.0d2
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.1.0.13
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00BCBEE0093E4EF0
    Current user is not an administrator.
    The current local date and time is 2013-04-05 19:32:36.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Intel(R) HD Graphics
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:     {E1CB97AA-CDFF-4C43-8F63-658D7E70A39F}
    Description:     Intel(R) Centrino(R) Advanced-N 6205
    IP Address:     172.16.42.14
    Subnet Mask:     255.255.255.0
    Default Gateway:     172.16.42.1
    DHCP Enabled:     Yes
    DHCP Server:     172.16.42.1
    Lease Obtained:     Fri Apr 05 19:01:59 2013
    Lease Expires:     Fri Apr 05 20:01:59 2013
    DNS Servers:     172.16.42.1
    Adapter Name:     {44D6CC7B-1F1E-4F26-BBB8-18F98A868E2B}
    Description:     Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:     0.0.0.0
    Subnet Mask:     0.0.0.0
    Default Gateway:     0.0.0.0
    DHCP Enabled:     Yes
    DHCP Server:
    Lease Obtained:     Thu Jan 01 11:00:00 1970
    Lease Expires:     Thu Jan 01 11:00:00 1970
    DNS Servers:
    Active Connection:     LAN Connection
    Connected:     Yes
    Online:          Yes
    Using Modem:     No
    Using LAN:     Yes
    Using Proxy:     No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2013-02-14 17:34:33.
    **** Device Connectivity Tests ****
    iPodService 11.0.2.26 is currently running.
    iTunesHelper 11.0.2.26 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    Daniel Pugh's Ipod, iPod touch (4th generation) running firmware version 6.1.3
    Serial Number:     C3XDN3C5DCP7
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 5.0.1
    Serial Number:     C38GKQWZDT9Y
    **** Device Sync Tests ****
    Sync tests completed successfully.
    Kindest Regards
    Daniel (Puggy858)

    Hi Diesel vdub,
    Did that and I tried again, download stops halfway through and comes up with same message I have already quoted. Wifi Signal is 5/5, network is working, just not letting me download via iTunes.

  • IMessage Activation. Could no sign in. Please check your network connection and try again.

    iMessage Activation. Could no sign in. Please check your network connection and try again.
    I have two apple ids.
    one for Itunes and other for everything else.
    I dont want to use the itunes id for imessage/facetime.
    i tried the following solutions to no avail:
    1. http://support.apple.com/kb/TS4268.
    2. Click on DNS and change the current value to 8.8.8.8,8.8.4.4
    3. verified -unverified-verified email.
    4.disassociated /removed alternate Apple ids.

    Hello, Hannaabe. 
    Thank you for visiting Apple Support Communities.
    I see you have already been through most of the troubleshooting steps for this issue.  Make sure to take a look at the section below labeled If you've waited 24 hours and still can't activate FaceTime or iMessage.
    If you see "Waiting for Activation", "Activation unsuccessful", or "An error occurred during activation"
    These messages occur when your iPhone is trying to activate your phone number with iMessage or FaceTime.
    To resolve these status messages, follow these steps. After each step, turn FaceTime and iMessage off and on again in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Make sure that you have a cellular network connection with your cellular provider. You need a cellular network connection to activate iMessage and FaceTime with your iPhone phone number.
    Go to www.apple.com in Safari to make sure that you have a data connection. You need a data connection to activate iMessage and FaceTime with your iPhone phone number.
    Make sure that you can send and receive SMS. You need a valid SMS messaging plan to activate FaceTime and iMessage.
    Make sure that FaceTime hasn't been restricted: tap Settings > General > Restrictions > FaceTime.
    Set iPhone to the correct time zone: tap Settings > General > Date & Time.
    Note: If Set Automatically is on but the incorrect time zone appears, turn Set Automatically off and choose the correct time zone, date, and time.
    Contact your carrier to verify that there are no restrictions, blocks, or filters on text messages. Restrictions, blocks, or filters on text messaging will prevent iMessage and FaceTime registration from completing.
    If "Waiting for Activation" still appears after you perform these steps, turn FaceTime and iMessage off and on in Settings > Messages and Settings > FaceTime. You may need to wait up to 24 hours to complete activation. Most attempts will take less than an hour, but some attempts may take up to 24 hours. If your issue isn't resolved after 24 hours, please contact Apple for assistance. If you've recently performed a remote wipe on your iPhone, wait 24 hours from the time you performed the remote wipe, and then turn iMessage off then back on.You can still activate iMessage and FaceTime with your Apple ID when these status messages appear. You can see that you've activated FaceTime and iMessage with your Apple ID by tapping:
    Settings > FaceTime > You can be reached by FaceTime at:
    Settings > Messages > Send & Receive > You can be reached by iMessage at:
    If you've waited 24 hours and still can't activate FaceTime or iMessage
    If you're still unable to resolve the symptoms above after performing these troubleshooting steps, please contact Apple for assistance.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H.

  • Active network connection

    hi, I've been having connection problems, after 3 phone calls to my service provider they seem to think the fault is that i have to many active network connections running in the back ground which is slowing my speed down, they say i need to reduce these, and suggested i speak to apple or go online to find the answer. So here i am trying to find the answer! Anyone know how to reduce my active network connections?
    or even have a clue as to what i'm talking about, not sure my self only been an apple convert for 4 months
    cheers

    this is the writing that is there
    Active Internet connections (including servers)
    Proto Recv-Q Send-Q Local Address Foreign Address (state)
    tcp4 37 0 192.168.0.8.53334 web1.intellichat.https CLOSE_WAIT
    tcp4 37 0 192.168.0.8.53333 web1.intellichat.https CLOSE_WAIT
    tcp4 37 0 192.168.0.8.53332 web1.intellichat.https CLOSE_WAIT
    tcp4 0 0 localhost.ipp . LISTEN
    tcp6 0 0 localhost.ipp . LISTEN
    udp4 0 0 192.168.0.3.ntp .
    udp4 0 0 192.168.0.8.ntp .
    udp4 0 0 *.53235 .
    udp4 0 0 *.52116 .
    udp4 0 0 *.58007 .
    udp4 0 0 *.53352 .
    udp4 0 0 *.63099 .
    udp4 0 0 *.61898 .
    udp6 0 0 jo-booths-macboo.ntp .
    udp6 0 0 jo-booths-macboo.ntp .
    udp4 0 0 . .
    udp6 0 0 localhost.ntp .
    udp4 0 0 localhost.ntp .
    udp6 0 0 localhost.ntp .
    udp6 0 0 *.ntp .
    udp4 0 0 *.ntp .
    udp6 0 0 *.mdns .
    udp4 0 0 *.mdns .
    udp4 0 0 . .
    udp4 0 0 . .
    icm6 0 0 . .
    icm6 0 0 . .
    Active LOCAL (UNIX) domain sockets
    Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
    4582bb0 stream 0 0 0 4b17908 0 0 /var/tmp/launchd/sock
    4b17908 stream 0 0 0 4582bb0 0 0
    45824c8 stream 0 0 0 4b17e58 0 0 /var/run/asl_input
    4b17e58 stream 0 0 0 45824c8 0 0
    4af9908 stream 0 0 0 4af9e58 0 0 /var/run/mDNSResponder
    4af9e58 stream 0 0 0 4af9908 0 0
    4af92a8 stream 0 0 0 4582000 0 0 /var/run/mDNSResponder
    4582000 stream 0 0 0 4af92a8 0 0
    4af9770 stream 0 0 0 4ae54c8 0 0 /var/run/mDNSResponder
    4ae54c8 stream 0 0 0 4af9770 0 0
    55efdd0 stream 0 0 0 55efe58 0 0
    55efe58 stream 0 0 0 55efdd0 0 0
    55efee0 stream 0 0 0 55eff68 0 0
    55eff68 stream 0 0 0 55efee0 0 0
    4b17550 stream 0 0 0 4b173b8 0 0 /var/run/usbmuxd
    4b173b8 stream 0 0 0 4b17550 0 0
    4b17440 stream 0 0 0 4b174c8 0 0 /var/run/mDNSResponder
    4b174c8 stream 0 0 0 4b17440 0 0
    4b17770 stream 0 0 0 4b176e8 0 0 /var/run/mDNSResponder
    4b176e8 stream 0 0 0 4b17770 0 0
    4582660 stream 0 0 0 4b17cc0 0 0
    4b17cc0 stream 0 0 0 4582660 0 0
    4b17aa0 stream 0 0 0 4b17990 0 0 /var/run/mDNSResponder
    4b17990 stream 0 0 0 4b17aa0 0 0
    4b17a18 stream 0 0 0 4b17c38 0 0
    4b17c38 stream 0 0 0 4b17a18 0 0
    4b17b28 stream 0 0 0 4b177f8 0 0
    4b177f8 stream 0 0 0 4b17b28 0 0
    4ae5dd0 stream 0 0 51b9880 0 0 0 /tmp/launch-v8HCng/:0
    4af97f8 stream 0 0 51b99a0 0 0 0 /tmp/launch-tFvzdl/Listeners
    4582198 stream 0 0 51b9ac0 0 0 0 /tmp/launch-bkoHn2/Render
    4ae5088 stream 0 0 51b9be0 0 0 0 /private/tmp/com.hp.launchport
    45822a8 stream 0 0 4fca900 0 0 0 /tmp/launchd-66.TNoxkx/sock
    4ae5220 stream 0 0 0 0 0 0
    4af9aa0 stream 0 0 0 4af94c8 0 0 /var/run/asl_input
    4af94c8 stream 0 0 0 4af9aa0 0 0
    4b17f68 stream 0 0 0 4af9088 0 0
    4af9088 stream 0 0 0 4b17f68 0 0
    4af9cc0 stream 0 0 4e366c0 0 0 0 /var/run/pppconfd
    4af9000 stream 0 0 0 4af9440 0 0
    4af9440 stream 0 0 0 4af9000 0 0
    4ae5440 stream 0 0 0 4b17dd0 0 0
    4b17dd0 stream 0 0 0 4ae5440 0 0
    4af9660 stream 0 0 0 4af9ee0 0 0
    4af9ee0 stream 0 0 0 4af9660 0 0
    4ae5990 stream 0 0 0 4af9dd0 0 0
    4af9dd0 stream 0 0 0 4ae5990 0 0
    4af9550 stream 0 0 0 4af95d8 0 0
    4af95d8 stream 0 0 0 4af9550 0 0
    4af9990 stream 0 0 0 4af9a18 0 0
    4af9a18 stream 0 0 0 4af9990 0 0
    4af9bb0 stream 0 0 0 4af9c38 0 0
    4af9c38 stream 0 0 0 4af9bb0 0 0
    4ae5110 stream 0 0 0 4ae5198 0 0
    4ae5198 stream 0 0 0 4ae5110 0 0
    4ae5330 stream 0 0 0 4ae53b8 0 0
    4ae53b8 stream 0 0 0 4ae5330 0 0
    4ae5880 stream 0 0 0 4ae5908 0 0
    4ae5908 stream 0 0 0 4ae5880 0 0
    4ae5aa0 stream 0 0 0 4ae5b28 0 0
    4ae5b28 stream 0 0 0 4ae5aa0 0 0
    4ae5ee0 stream 0 0 0 4ae5f68 0 0
    4ae5f68 stream 0 0 0 4ae5ee0 0 0
    4582550 stream 0 0 0 45825d8 0 0
    45825d8 stream 0 0 0 4582550 0 0
    45827f8 stream 0 0 0 4582770 0 0
    4582770 stream 0 0 0 45827f8 0 0
    4582880 stream 0 0 0 4582990 0 0
    4582990 stream 0 0 0 4582880 0 0
    4582a18 stream 0 0 0 4582aa0 0 0
    4582aa0 stream 0 0 0 4582a18 0 0
    4582c38 stream 0 0 46cc250 0 0 0 /var/tmp/launchd/sock
    4582cc0 stream 0 0 46cc370 0 0 0 /private/var/run/cupsd
    4582d48 stream 0 0 46cc490 0 0 0 /var/run/usbmuxd
    4582e58 stream 0 0 46cc5b0 0 0 0 /var/run/asl_input
    4582f68 stream 0 0 46cc640 0 0 0 /var/run/portmap.socket
    4582ee0 stream 0 0 46cc6d0 0 0 0 /var/run/mDNSResponder
    4ae56e8 dgram 0 0 0 4582330 4582330 0
    4582330 dgram 0 0 0 4ae56e8 4ae56e8 0
    4b17198 dgram 0 0 0 4b17110 4b17110 0
    4b17110 dgram 0 0 0 4b17198 4b17198 0
    4b17220 dgram 0 0 0 4582dd0 0 4b17880
    4b172a8 dgram 0 0 0 4b17330 4b17330 0
    4b17330 dgram 0 0 0 4b172a8 4b172a8 0
    4b175d8 dgram 0 0 0 4b17660 4b17660 0
    4b17660 dgram 0 0 0 4b175d8 4b175d8 0
    4b17880 dgram 0 0 0 4582dd0 0 4ae5d48
    4b17bb0 dgram 0 0 0 4b17d48 4b17d48 0
    4b17d48 dgram 0 0 0 4b17bb0 4b17bb0 0
    4ae5d48 dgram 0 0 0 4582dd0 0 4ae5cc0
    4ae5cc0 dgram 0 0 0 4582dd0 0 4af9198
    4ae5c38 dgram 0 0 0 4ae5e58 4ae5e58 0
    4ae5e58 dgram 0 0 0 4ae5c38 4ae5c38 0
    4ae52a8 dgram 0 0 0 4af9d48 4af9d48 0
    4af9d48 dgram 0 0 0 4ae52a8 4ae52a8 0
    4af9198 dgram 0 0 0 4582dd0 0 45826e8
    4582440 dgram 0 0 0 4ae5770 4ae5770 0
    4ae5770 dgram 0 0 0 4582440 4582440 0
    4af9220 dgram 0 0 0 4ae5550 4ae5550 0
    4ae5550 dgram 0 0 0 4af9220 4af9220 0
    45826e8 dgram 0 0 0 4582dd0 0 4af9880
    4af9880 dgram 0 0 0 4582dd0 0 4b17ee0
    4b17ee0 dgram 0 0 0 4582dd0 0 4582908
    4ae5660 dgram 0 0 0 4582220 4582220 0
    4582220 dgram 0 0 0 4ae5660 4ae5660 0
    4582908 dgram 0 0 0 4582dd0 0 0
    4582dd0 dgram 0 0 46cc520 0 4b17220 0 /var/run/syslog

  • When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT.  MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."

    When updating to iOS 5.0.1. get the err -3259, thus unable to install new iOS. The message I receive goes: "THE NETWORK CONNECTION TIMED OUT.  MAKE SURE YOUR NETWORK SETTINGS ARE CORRECT AND YOUR NETWORK CONNECTION IS ACTIVE, OR TRY AGAIN LATER."
    Does anyone know how to solve this tiresome problem, please!?? The update is downloaded upto 723.5MB, and is required upto 723,6MB, then the error message pops out! Tnx.

    I have a quick wifi connection (Mac shows it as about 35 megabits) but I couldn't get the 5.0.1 OTA to work, I had to do it via cable to my computer's iTunes - and as I was already on iOS 5 it was only a small download, basically the same size as the OTA size.
    As the original poster is talking about a 730 meg download then I assume that they are still on iOS 4.3.5 or below and can therefore only download via their computer's iTunes - you need to be on iOS 5+ before you get the OTA option.

  • How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

    How do I activate iMessage when it tells me that I need to check my network connection but I have full internet connection?

    iOS: Troubleshooting FaceTime and iMessage activation                           
    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • HT2729 i tunes could not connect to the i tunes store.an unknown erroroccurred (11556) make sure your network connection is active and try again

    i tunes could not connect to the i tunes store.an unknown erroroccurred (11556) make sure your network connection is active and try again

    Try opening an elevated command prompt by going to the start screen, then typing "CMD" without quotes and pressing CTRL + SHIFT + ENTER.  It will ask you if you want to allow it to make changes, click yes.
    Then, while in the command prompt, you need to type "netsh winsock reset".  You type this without the quotes.  Make SURE you are in an elevated command prompt window before trying this. If you don't know what that means, search google for "elevated command prompt".

  • My facetime is asking me to verify my email address but i do it opened the email and verified than i get an error message saying could not verify email please check network connection. but i am connected to internet what do i need to do to access FaceTime

    my facetime wont open it askes to verify email i gort the email verified it and then i wait for awhile than i get a message saying that facetime couldnt verify email and to check network connectivity but i am connected to the internet. what do i need to do to get my factime working again?

    Hey Desireeesamaroon,
    Thanks for the question. I understand that you are experiencing issues with FaceTime on your Mac. The following resource may help you troubleshoot these issues:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Thanks,
    Matt M.

  • HT201210 Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is do

    Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
    Thanks
    Roger

    Hi, I went to update my iphone using my itunes site, halfway through i got a message saying reset, make sure that your network is active and try again, the network connection is fine. it will not allow me acces to my phone unless a recovery is done. I have not done any back ups and obviously dont want to lose any information. Please can anyone help
    Thanks
    Roger
    [email protected]

Maybe you are looking for