Active Hover Field
When I make a custom generic component the bigger of the two graphics that makes up the component is used as the 'activator'. For example i have and image that when you hover over it, it fades out and a bigger version of that image fades in. The issue is if the cursor goes over anywhere the bigger image would come in, it activates the fade effect; when I only want it to fade if it is hovered over the smaller image.
Is there anyway to get around this or is that just how it is?
Hi xianxou,
In the State of your custom component with the smaller image (I assume State 1)...
-In the layers panel, show the larger image (that is triggering the interaction when you don't want it to)
-Select it
-Hit the delete key.
Now run your project. The larger image is now "not there" so it shouldn't interfere with rollover.
It is a little bit hidden but these three actions have different consequences...
Turning the preview off for an item using the eyeball in the Layers panel (hides it for that state)
Deleting an item using the keyboard (deletes the item from that state)
Selecting an item in the Layers panel and hitting the trash can (completely removes it from your layer list and whole project)
Hope this helps,
Ian
Catalyst Team
Similar Messages
-
How do I create a spinner for an "Activity" Task field???
I am in need of a "spinner" for one of my Activity Task fields. What I term a spinner is basically a numeric field which which can be increased or decreased by the user through the use of either an up or down arrow next to the numeric field.
Example: http://en.wikipedia.org/wiki/Spinner_%28computing%29
Anyone know if this is possible? I need the spinner to be primed with numerical values of 0 through 99.
Thanks in advance for your assitance.Well, I'd guess you could try to create it in a Form Applet, but I don't think a List Applet will allow you to have buttons next to a Field (Control).
AFAIK Siebel doesn't have spinners. You could try to open a SR with lowest priority and see what Oracle comes up with. They might open an Enhancement Request, but I guess that won't be finished in time for you. ;-) -
How operation (Activity No) field mandatory can be removed in Network.
Hi,
In CAT2 time entries screen for a person who worked on service order,
directly I can book time entries of the person with service order number without entry of operation (activity number) in CAT2 screen, no problem with service order case..
But in case of CAT2 time entries screen for a person who worked on PS network*, entry of network operation field (Activity number) is mandatory.
Please suggest how operation (Activity number) field mandatory can be removed in case of time entries to PS network in CAT2 screen.
I want to book time entries of the person only to the Network number don't want to include operation number in CAT2 screen.
Thanks & Regards
SR .I dont think it would be possible to book timesheet entries directly against a network. Moreover i haven't come across any business scenario that demands timesheet entry against the network header.
Moreover, how do you think the system will calculate the cost if you book timesheets against a network? In a standard scenario, when timesheet is booked against a network activity system calculates cost based on the work center maintained in the activity. Work center has the cost center and the activity type combination for which rates are maintained in KP26.
Lastly, could you please explain the business need behind booking timesheets against a network header? -
Is .class-active:hover good css?
I ran across some code for a menu that has this in the css:
.ddmx .item1,
.ddmx .item1:hover,
.ddmx .item1-active,
.ddmx .item1-active:hover { position:relative; display:block; padding:3px 10px 3px 10px; font:20px arial; background-color:#5B7893; color:#BECBD6; font-weight:bold; text-decoration:none; white-space:nowrap; width:195px; }
I understand what .item1 and .item1:hover are but I've can't find any tutorial that shows something like .item1-active and .item1-active:hover.
Is this legit css and if so what does it mean?
Thanks
TomI understand what .item1 and .item1:hover are but I've can't find any tutorial that shows something like .item1-active and .item1-active:hover.
Is this legit css and if so what does it mean?
Yes, it's legit.
.item1-active would refer to an item with that as a class assignment -
<a class="item1-active" href="whatever.html">
.item1-active:hover would refer to the hover state of that same item. -
Activity confirmation field at co11n mandatory
Dear all,
I want to make a activity confirmation field at co11n mandatory . How can i do this ?
Plz guide meDear all
Thx for your reply .
I have made setting as per u suggest me i.e.
"Excute T code CO86.
Double click on 'Production order confirm.: Detail'.
In the next screen under the field name from 'AFRUD-ISM01' to 'AFRUD-ISM06' (these are six standard values), mark as required, whichever is necessary.
Save the setting"
Mandatory right mark is not comming on co11n sceen . and system also allow me confirmation without putting any value in those field.
Plz guide me
Edited by: surendra patil on Apr 29, 2009 7:41 AM -
0pp_c15 activation error - Field /BI0/ACOPC_O0100 is unknown
hi,
There is an error occured while activating the cube 0PP_C15 - Backlogged production orders.Transformation 0PP_C15 80PP_DS01 is not active .
The following error shown in its transfer routine while trying to activate the transformation.
E:Field "/BI0/ACOPC_O0100" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Thanks & Regards
Shyne Sasimohanan
<removed by moderator>
Edited by: Siegfried Szameitat on Sep 29, 2010 3:53 PMHi,
Try to activate the DSO 0COPC_O01 and re-activate the transformation.
Hope this helps...
Rgs,
Ravikanth. -
Hi,
In what table can I find relation between the<b> Plan Activity</b> and <b>Distribution Key</b> data assciated with a <b>Activity Type</b> field in Costing transaction KP26.
Please help.
Regards,
Rajesh.HI,
Please check these notes.
86613
688883 Confirmation with price 0: Message BK057
645811 Confirmation with plan price 0: No costs in CO
Plese assign points if it useful.
Regards
Ravinagh Boni -
Hi ,
I have maintained a specific numerical values under " User field " tab in Cj20N under activity tab.
Now i need to take that value for developing a report . Could any one please suggest me the right table name and path to track the value.
regards
Muralidharan.SThanks with that I got the Operation and counter number , but the values against the user feild entry is still not available.
Regards
Muralidharan.S -
I have created an interactive PDF vir adobe creator with input fields: How do we make it active when this document are opened in IPAD so that the user can type on the input fields
Download and install the Adobe Reader mobile application onto your iPad. Then open the PDF form using the Adobe Reader.
Randy -
Prob in activating a field in delivery while creating delivery via VL04
hi thx i am also facing the same prob. this badi is working while creating deliveries via VL01N OR VL02N but if we are creating delivery via VL04 this badi is not working, can u please guide me.
thanx in adv.In the Import parameter TECHN_CONTROL one field called SENDER_SYSTEM is there, it takes the Logical System Name(Default will be Local System). Check whether it is defined or not. This can be viewed in SALE tranasction.
Tcode SALE > Basic Setting>Logical System-->Assign Logical System to client.
Here You check ur Client is assigned logical System Name or Not?
Debug your program and check this value....
It will resolve ur prob.. -
Activity type field in Maintenance Order
Hi all
My client requirement is that activity type (LARNT)should me mandatory in maintenance orders to capcture the cost with out fail.
Could any body suggest me that when we need to do that?
Regards
SrinivasHi
Since the work center is mandatory you can make the activity type mandatory for workcenter master data record in OPFA IMG
or check in OIOPL where you can make the activity type as mandatory ,but i think it will only work once you nagivate the operation tab
or check whether user exit order at save will be useful
regards
thyagarajan -
MSA: Activity Status field
Dear Colleagues,
In MSA application, when creating new activity, combos like Status, Result and Result are empty.
Which objects/subscritpion should I extract to get it populated?
Please respond
Regards
MilindHi Milinda
I downloaded the following objects using Tcode R3AS4
CRM_DNL_ACT_CAT
CRM_DNL_ACT_H
CRM_DNL_ACT_OBJ
CRM_DNL_ACT_PRI
CRM_DNL__CODEPRG
CRM_DNL_CODEPRO
CRM_DNL_COPYCU
CRM_DNL_ITMTYPE
CRM_DNL_IT_ASSG
CRM_DNL_QPC
CRM_DNL_QPG
CRM_DNL_SRVCUST
CRM_DNL_SRV_TY
CRM_DNL_TEXT_O
CRM_DNL_TEXT_P
CRM_DNL_TJ30
But even then the status and the goal which I defined are not transported to CDB.
Can you let me know what subscriptions you have ?
I also could not understand what you mean by the Run the Profiler and know the Bdocs and Tables responsible for this.
I have checked the Table crmc_act_obj it contains the new result I have defined but the CDB table CDB_CRMC_ACT_OBJ does not contain any entries.
Rgds -
Coloring gantt chart activities per activity custom field
hi, I created a new outline code called 'Discipline'.
it has the following values:
- Integration
- Verification
I would like to color all activities in the Gantt chart that have the code 'Integration' in one color and all the 'Verification' activities in a different color.
how do I do that?
thanks,
YuvalYou can refer to this article it covers similiar concept :
http://epmxperts.wordpress.com/2012/05/24/colored-task-bars-based-on-tasks-nature-and-show-progress-of-delayed-tasks-in-gantt-chart/
Sapna Shukla -
Activation of Bank Control Key field (P0009-BKONT) in IT 0009
Hi,
We got a requirement to activate Bank Control Key field (P0009-BKONT) in IT 0009 for the Countries Barbados, Dominican Republic and Trinidad & Tobago.
For activating this field, we copied a new screen for each country for IT 0009 and made the field P0009-BKONT as Standard in T588M (Screen Modifications). Updated the feature P0009 also.
When checked IT 0009, Bank Control Key is not found. Again, we have added the entries for these countries in table V_T521A (Bank details: Relevance of special fields) by selecting Control Key as Relevant.
Still no luck. Bank Control Key is not seen in IT 0009.
Can someone help me by providing solution how to activate field P0009-BKONT for the above countries. Thanks !!Hi Sai,
You mean system uses this new screen but you don't see the field on it?
If this is npt the case and system does not select the right screen check the feature P0009 in PE03.
Regards,
Omid -
Empty on the fields of activity description in CATS_DA
Hello Experts,
We use CAT2 to post some absence , and we can see the activity description related here.
But when we try to use CATS_DA to to download report, some of rows are empty on the activity desciption fields.
Who know why ? and how to solve ?
Thanks and Regards
Shubincheck in CATSDB table, is there any entry for PERNR and activity type. CATS_DA takes values from CATSDB table
Maybe you are looking for
-
[SOLVED] xserver 1.5 and KDE 4 keymaps - strange behavior
I apologize if this has already been addressed, but I have read every thread about this I can find, and the wiki page, and I can't find a solution. I use a standard US keyboard (it's a laptop), but with the Dvorak keymap. Most things work fine, exce
-
My ipod shuffle 2nd generation is charging but not starting.
My Ipod shuffle 2nd generation 4 yrs old is charging when i connect it to the computer it blinks orange light then when i eject it, it shows green light. But afterwards when i start it nothing happens. It used to work very nicely before but now Its d
-
VoiP on Nokia E51 - Help Needed Urgently !!!
I am located in Copenhagen Denmark and I use a wireless network to connect to the internet. My Nokia E51 is also able to detect the same network when I scan for WLAN. However when I try to use it to make a net call it says ''NO WLAN COVERAGE FOUND''.
-
hi, can i setup 2 node oracle RAC using vmware server in a single laptop..? cpu-intel i3 memory 4GB. thanks in advance, Sarathi
-
As I mentioned above I have three pc's all running win7 and firefox 6.02. On this box website fonts are different than the others. All of the "option" settings are identical on all of the boxes. Including "allow pages to choose their own fonts". I un