MSA: Activity Status field
Dear Colleagues,
In MSA application, when creating new activity, combos like Status, Result and Result are empty.
Which objects/subscritpion should I extract to get it populated?
Please respond
Regards
Milind
Hi Milinda
I downloaded the following objects using Tcode R3AS4
CRM_DNL_ACT_CAT
CRM_DNL_ACT_H
CRM_DNL_ACT_OBJ
CRM_DNL_ACT_PRI
CRM_DNL__CODEPRG
CRM_DNL_CODEPRO
CRM_DNL_COPYCU
CRM_DNL_ITMTYPE
CRM_DNL_IT_ASSG
CRM_DNL_QPC
CRM_DNL_QPG
CRM_DNL_SRVCUST
CRM_DNL_SRV_TY
CRM_DNL_TEXT_O
CRM_DNL_TEXT_P
CRM_DNL_TJ30
But even then the status and the goal which I defined are not transported to CDB.
Can you let me know what subscriptions you have ?
I also could not understand what you mean by the Run the Profiler and know the Bdocs and Tables responsible for this.
I have checked the Table crmc_act_obj it contains the new result I have defined but the CDB table CDB_CRMC_ACT_OBJ does not contain any entries.
Rgds
Similar Messages
-
To make a status field readonly on Activity based on condition
Can anyone help me with the validation formula that I need to use to make the activity status field readonly.
My condition is :-
If the Owner Id on the Activity <> login Id, then make status field readonly
Thanks,
NGHi NG,
Not 100% clear on what you are trying to achieve so I thought I'd offer the suggestions I thought most likely.
1. If the Logged In User does not match the Activity Record Owner, then make the status field read only
PRE('<Status>') = [<Status>] OR UserValue('<UserId>') = [<OwnerId>]
i.e. Status value has not changed OR logged in user equal to record owner
2. If the Logged In User matches the Activity Record Owner, then make the status field read only
PRE('<Status>') = [<Status>] OR UserValue('<UserId>') {NOT EQUAL} [<OwnerId>]
+i.e. Status value has not changed OR logged in user equal does not equal record owner. Just remember to replace {NOT EQUAL} with the appropriate syntax in expression builder.+
Regards,
Cam -
How to edit LOV of the status field in activity record type?
Hi experts
I just want to edit the list of values of status field in activity record type, it is a read only filed, can anyone tell me if it is possible to edit? seems like it is referenced from a field called "EVENT_STATUS";
Thanks,
TigerTiger, at this time it is not possible to edit the values in this field.
-
Update activity status based on Customer request status,
Hello,
I have a requirement to update the status field of a service request activity to Completed when the service request status = closed. Any suggestions?
Thanks,
SKJIf the field they are updating is in the same object it shouldn't be an issue. If another object needs to be updated then the workflow won't work.
Integration events can be used for this. generate a event and have a external process poll the integration event queue for new events. when received, it can do whatever is necessary via web services. -
Can we remove the default status field from OIM
hi,
even when my i am not mapping any field to the OIM status field , it is taking Active as default value. i dont require that field so is it possible to remove the default status field of OIM.
i am using database GTC connector for trusted recon.User will always have a certain status like Active, Disabled etc, so even when you doesn't map it to any attribute the OIM solution calculates it with the help of the user's Start Date, End Date etc.
A user is bound to have a status.
Thanks
Sunny -
HI all,
What does the STATUS field in CKMLPP table suggest. How the Material selection for ML run is affected by the change of this field value.
Regards,
VaskarHi Vaskar,
The note 1021361 explains how the costing run Selection step works. The note 1020833 explains how the Determine Sequence step works. Please read them for more information. The CKMLPP keeps periodical quantities for all Material Ledger active materials.
You can follow up the selection logic with the note 1021361.
Regards,
Abhisek -
MSA-Activity: Invalid Funtion of person responsible
Hello,
We are on CRM 4.0 and MSA 4.0/SP06 release.
Problem Desc:
1) Created new activity in MSA (Activity-->Details tileset) and saved.
2) Person responsible tile will be defaulted to logged in employee with function as "Sales rep"
3) Now added one more employee as a function "Interaction center Agent"
4) when try to save, it display error on status bar as "Function of person responsible is invalid for selected transaction type;select a valid function".
This is happening for all the other functions (except Attendee) like sales assistant, acount manager. sales clerk, sales manager....
PLease advice.
Regards
MilindI am on CRM 3.0, and I have only "sales rep" and "person responsible" in dropdown as possible partner function roles.
May be you need to check your partner determination procedure whether you have defined other partner functions for activity.
Regards,
Kaushal -
Activity Status as Completed (pre-default)
I am trying to have Status field for Activity as pre-default "Completed", whenever the type is Meeting.
I am coding in the Status field:
IIf ([<Type>] = 'Meeting', LookupValue("EVENT_STATUS", "Completed"),[<Status>]).
I am using Create a New Task in the Opp. record...
I can´t make it work... the pre-default is not shown in the screen...even after saving the activity.
I tried using a post-default in the Status field and after I save the activity I can see it listed in the section *"Open Activities"* with the status "Completed"... this is strange...
Also, the same activity is listed under "Completed Activities"... so it is listed in both places...
If I click on the "Done" link (in Open Activities) and save the activity... it is not listed anymore under Open Activities.
Pls. I´d appreciate any hints on this...
Txs. a lot
AntonioOk. I understand... I am clicking New and then selecting the Type....
Well pre-default does work... at least partially...
But I still don´t understand why the Activity created with Post-default = Completed is still listed under Open Activitities... It goes to the Completed activities section just after I edit it and save again...
Pls. help...
Txs.
Antonio -
Status Profile: Multiple Active Statuses
I have created a status profile through BS02 and assigned to a couple of Sales Document Types.
After implementing, I have found that there can be multiple active statuses. This is not a desired result.
1. Is there a way to control the profile, so that only one status CAN be active?
2. Is there a way to "fix" the orders which currently have multiple statuses?
Thanks.Hi Tom,
after creating status u need to assign status to sales document.the particular status work for that sales document only.Go to VOV8 in transaction flow tab u enter ur status at status profile field and save the document.
Please do check the status how u maitained Ex.for qotation bolck,order block,delivery block... assign appropriate status to the sales document.
Hope this may solve ur issue.
Regards,
Reddyy -
Table for user status field in CJ20n transaction project defination
HI ALL,
what is table for user status field in CJ20n transaction project defination creation. This field is in Basic Data tab.
Thanks.Hi,
Check following tables for Usre status:
TJ30 - User status
TJ30T - Texts for user status
TJ20 - Status profile
JEST - Object status
JSTO- WBS status profile.
Check this code:
REPORT zps_get_userstatus .
PARAMETERS: p_posid LIKE prps-posid.
*-- Constants
CONSTANTS: gc_yes(1) TYPE c VALUE 'X',
gc_no(1) TYPE c VALUE ' '.
*-- Variables
DATA: l_objnr LIKE prps-objnr.
*-- Internal tables
DATA: BEGIN OF lit_jest OCCURS 0,
objnr LIKE jest-objnr,
stat LIKE jest-stat,
END OF lit_jest.
DATA: BEGIN OF lit_jsto OCCURS 0,
objnr LIKE jsto-objnr,
stsma LIKE jsto-stsma,
END OF lit_jsto.
DATA: BEGIN OF lit_status OCCURS 0, "Combination of JEST & JSTO
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE jest-stat,
END OF lit_status.
DATA: BEGIN OF lit_usrsta OCCURS 0, "Uer status for all wbs
objnr LIKE jest-objnr,
stsma LIKE jsto-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrsta.
DATA: BEGIN OF lit_usrtxt OCCURS 0, "User Status text - TJ30T
stsma LIKE tj30t-stsma,
stat LIKE tj30t-estat,
txt04 LIKE tj30t-txt04,
END OF lit_usrtxt.
* get WBS object number
SELECT SINGLE
objnr FROM prps
INTO l_objnr
WHERE posid = p_posid.
* get WBS active status from table JEST
SELECT
objnr
stat
FROM jest INTO TABLE lit_jest
WHERE objnr = l_objnr AND
inact <> gc_yes.
* get WBS status profile from table JSTO
SELECT
objnr
stsma FROM jsto
INTO TABLE lit_jsto
WHERE objnr = l_objnr.
* combine JEST and JSTO table for user status
LOOP AT lit_jest.
IF lit_jest-stat CP 'E++++'.
READ TABLE lit_jsto WITH KEY
objnr = l_objnr.
IF sy-subrc = 0.
lit_status-objnr = lit_jest-objnr.
lit_status-stsma = lit_jsto-stsma.
lit_status-stat = lit_jest-stat.
APPEND lit_status.
ENDIF.
ENDIF.
CLEAR: lit_jsto, lit_status.
ENDLOOP.
* get text for user status
SELECT DISTINCT
stsma
estat
txt04 FROM tj30t
INTO TABLE lit_usrtxt
FOR ALL ENTRIES IN lit_status
WHERE stsma = lit_status-stsma AND
estat = lit_status-stat AND
spras = sy-langu.
Let me know if you have any question.
Regards,
RS -
No Status field display in Appointment
Hi,
when I try to import data by selecting Appointment,I can't find status field to map.
Anyone can help,please.
I want to import status into Appointment.I don't want to use task.
Thanks
PaePae, there is no status field for appointments. At the time of the appointment the open appointment activity automatically completes to a completed activity.
-
It appears that the status field on the Service Request and Activity seems to be of PickList (Read-Only) and hence I am not able to add any other values. We are basically looking at adding one more value "Cancelled" to the Tasks/Appointments in the Status field. Any ideas?
Thanks,
SriramHi sriram,
IN service request, "Calcelled" value is available by default and to provide this value in task / Appointment in Status field i suggest you to use one workaround. rename existing status field to "Status Old" and create new Pick list field and name it "Status" and add picklist values which you require and finally replace the old field with newly created status pick list field in appointment layout.
for any other thing pls write back.
Cheers
Nisman -
Changing Picklist for Activity Status
Does anybody has an idea, how to change the values of the Activity Status Picklist? We would need just "open" and "closed".
thx, martinThanks Bob, I already assumed this.
I thought about using a second picklist and updating the standard status with a workflow. But this would require a default value in the standard status field.
The second problem is, that we are using Email Integration which I think is only updating the standard status. To solve this we need to have a default value in our second picklist of "closed". -
Change pointer for functional location- deletion flag & activation status
Hello,
Im trying to use change pointer for functional location outbound interface. I did all required settings in BD52. The problem is with deletion flag and acive/deactive status.
I found that those two are stored in:
table field
TAPL LOEKZ
TAPL PARKZ
The problem I have is that I cannot find the object for those table, and due to that it cannot be customized in BD52.
Could You please advise which object class should I use or alternatively which other table/field and object should I type in to activate change poiters for deletion flag and active/ not active status?
For object IFLO, and its table (IFLOT, IFLOTX, ILOA)- there is no field for del flag and active status.
Thanks in advance.Hi, standard didnt let us fulfilling this requirement. What we did- we extended table IFLOT with additional field for the status and used an user exit when saving FL, to take the value (status) from table JEST/TJ02T and copy the value to the newly created field. Then BD52, iflo, iflot, and the new field and it worked. Of course the function module for the message type (BD60) had to be changed to add this status value in additional segment/field for the idoc. Hope this will help You, as there is a lot of technical background behind it, and this is only functional overview.
rgds. -
How to change status fields for delivery vl01n or vl02n
Hi guys, I am new here.
I would like to ask how can we change the status field (LFSTK & LFGSK) in internal table IT_XVBUK and IT_XVBUP after we manipulate the quantities in the delivery order screen. I have tried BADI = LE_SHP_DELIVERY_PROC, Method = SAVE_DOCUMENT_PREPARE, but unfortunately, I can't change those status field from there. Is there any other alternative(eg user exits etc). Please help.
Many thanks.
wengYou can script it. So on you docReady event put xfa.form["#subform"].locale="en_CA" or "en_US". Or even assign it from a value in an xml element.
Kyle
Maybe you are looking for
-
Unable to change account assignment field in PO
Hi Experts! We are using SRM 7.0 with extended classic scenario. We are facing an issue with account assignment category field in a PO.Here is our scenario. User created a PO with costcenter account assignment field and this PO transffered to backend
-
Cannot login with mobile account when server is switched off
Hello all, First of all, my condolences to the Jobs family. OK. On with my problem. I apologise in advance if this has been answered before. I've trawlled through various boards and I can't seem to find an answer. I'll try to keep it brief. I've
-
Replace sentances and words directly in the FramMaker
Hi! I want to replace complete sentances and words directly in the FramMaker where I keep the layout of my entire book. The program/the code I am looking for need to be able to replace many words and sentences at the same time. For example: <in such
-
Scroll bar decided it didn't like me...
It appears that my scroll bar doesn't wan't to work anymore. All I've done is create a few buttons. If anyone is willing to take it a look at it? I'd be extremely greatful. Thanks, Nicko.
-
Sqlplus V10.2.0.4 in 11gR2 OracleHome?
Hi all, SLES 11 Oracle 11gR2 Is my sqlplus version correct or incorrect? Or something weird happened or is it normal? oracle@sdb51:/u01/app/oracle/product/11.2.0/dbhome_1/bin> ./sqlplus SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 3 17:55:14