Adaptation of the length of a slide to a sound

I want to improve the length of some slides to adjust it to the sounds I m importing. But my animations are in a mess..
How can I do.

Would love to see a screenshot, still don't understand what you mean by 'animations'?
If the slide duration is extended, the object timelines will not move unless:
they have a timing Until End of Slide: in that case the timeline will also be extended till the end, start point will not move;
they are anchored to the end of the slide (red arrow appearing): in that case the duration of the object timeline will not change but the whole will be moved so that the end point is attached to the end of the slide
Lilybiri

Similar Messages

Can i adjust the length each slide plays in keynote

can i adjust the length each slide plays in keynote.
im trying to make a keraoke style slideshow with lyrics, and music. can i adjust the length of each slide.

Click on the slide background then change the value in the drop down menu: Inspector > Animate > Transitions > Start Transition > Delay
The inspector is the panel on the right hand side.

How do I match the timing of a slide show to the length of a song?

I have created a slide show, and now want to put a song to it. The way the slides are set up, the show ends before the song does. There has got to be an easy was to slightly lengthen the timing of the slides to fit the length of the song.

In the Slide Inspector palette, in the Start Transition dropdown menu, select Automatic, and in the Delay field, select the time you want the slide to appear.

Jquery image slider adapting to the size of the browser

HI i have implemented a Jquery image slider into my mobile site, i have set the width to 100% so the width of the slider adapts nicely to all different browser sizes. However i cannot seem to figure out what i need to do to get the height to adapt like the width does. i have countless amounts off different CSS combinations but i cant figure it out. Can someone help?

thomas-shaw wrote:
HI i have implemented a Jquery image slider into my mobile site, i have set the width to 100% so the width of the slider adapts nicely to all different browser sizes. However i cannot seem to figure out what i need to do to get the height to adapt like the width does. i have countless amounts off different CSS combinations but i cant figure it out. Can someone help?
You can only distort the height. Obviously when images get narrower the height goes down in pro. Most of the time, unless you specifically throw a different set of images at mobile, they can look a bit stupid. A lot of responsive websites just hide the main image at smaller mobile sizes.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

How to determine the length of a line of text in a multi line text control

I am working on a simple widget to compare two snippets of text. The string controls are side by side with a colum of square bools in between
the two string controls.
The Bools line up with the lines of text in each string control. The Bools are used as a quick indicator that at that line point there is a difference
between the two string controls.
There is a slider that allows the user to scroll up and down, the slider scrolls both string controls simutaneously.
As the string controls are scrolled I will be comparing the left and right lines of text and reflecting the match status in the Bool Colum.
The reason I need to know the length of the line of text is so each line can be compared against one another. It is not as simple as counting the
col width of the string control and parsing the text because if there is a line return the text will word wrap before before it extends all the way accross the string control, which will cause parsing discrepencies.
Any suggestions on obtaining the multi line string control text character length would be much appreciated.
Best Regards
Tim C.
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!

Front panel of widget....
1:30 Seconds ARRRGHHH!!!! I want my popcorn NOW! Isn't there anything faster than a microwave!
Attachments:
One.vi ‏27 KB

Sender File Adapter. Fixed Lengths and Field Separator

Hello guys,
I have a doubt in Sender File Adapter with Content Conversion.
I have a text file like:
a,b,c,,e
I have the configuration in the adapter:
Register.fieldNames: a,b,c,d,e
Register.fieldSeparator: ,
The question I have is can I format the length of the text when i create the XML?
I woul like to create the XML like:
<Row>
<Register>
    <a>a   </a>
    <a>b </a>
    <a>c </a>
    <a>   </a>
    <a>e   </a>
</Register>
</Row>
I would like that when I create the file in Field A I have length = 4, but I have only 1 in the entry, and I want to fill the rest of the length with spaces.
I tried with FieldFixedLengths but when I test it the fields are not being formatted and take the commas as part of the field.
I know that this can be done in Receiver File Adapter, you leave for example one field of 5 length and you format it to 12 length with spaces.
Is this possible for Sender File ADapter?
Many thanks.
Regards,
Xavi.

hi,
See the example given in this bog, in this blog the string has been splited into different fields as per the field length, so you may use the same concept to get your output.
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
I hope it helps you.
Regards,
Sarvesh

Sender File Adapter picking the same file twice

We are facing a weird issue with File Sender Adapter
We are using PI File Adapter ( NFS ) to read files for a NFS folder and
processing those in PI.Normally it works fine. But for a scenario we
are noticing it sometimes process the same file twice before archiving,
thus duplicating the financial postings.
What we have is :
File Sender Adapter - NFS, Polling interval 60 secs, and Processign
mdoe Archive. File name includes Wildcards - JE_Upload*.txt
what we are noticing is that :
when it picks up a file, it immediately polls again to check for
another file, and sometimes the file is not yet archived so it picks up
and reprocess the same file.
If you see the message below, both belong to the same file, and it
picked up the same file again in 12 secs after processing it the first
time
Successful 02.11.2009 15:01:00 02.11.2009 15:01:01 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Successful 02.11.2009 15:00:49 02.11.2009 15:00:50 APMANUAL urn:bl:i2g:003:100
SI_SKF_FIDOC_OB XI Message
Anyone seen this behavior before?

Hi,
Please check the script which creates file in source NFS Folders. There is possibility that script is making change in file when PI is picking up the file.
When PI picks the file first time it creates one message ID in system. After that if script is making any change in file without file name change (This need not necessary data change), for PI it becomes new file and new message gets generated in PI for same file.
This error normally comes when File adapter is not able to archive file succesfully. For eg. file with same name alredy exists in Archive folder.
File adapter generates the new message id whenfile get modified(eg.change in its length or data change) even though
the file name is same and when file get change ,XI file adapter thinks that its new file and hence generate the new message id for same file.
If file has same name and notmodified then XI adapter will not generate new message id and will keep on throw the error till you remove that file with same name from the
archieve directory.
-Warm Regards,
Gouri

I had an ipod touch 4th gen and used the apple universal dock to play music through my stereo. I just got a 5th generation and a lightning adapter but the adapter does not fit the universal dock. Apple tech support has no solution, does anyone?

I had an ipod touch 4th generation and used the Apple Universal Dock to play music through my stereo. I just got the 5th generation and the lightning adapter but the adapter does not fit into the dock. Apple tech support has no solution, does anyone?

That is the adapter I purchased from Apple which does not fit in the Apple Universal cradle (which apparently is no longer universal). However, I just created my own solution. The cradle holds the dock connector at a slight angle so the adapter, which has a straight bottom edge, will not slide down far enough to make a connection. Since the adapter has a plastic case, I used my Swiss Army knife to whittle it down to fit. It's a no-tech solution, and free!

Can you modify the dimension of a slide for a project?

Hi,
I'd like to know if you can modify the dimension of a slide within a project?
I am aware you can Modify-> Rescale Project
That does it for the whole project, but what if I wanted to add more length to slide 6 only?
Please advise if that is possible.
Thank you!
Susanne

No, all slides have the same resolution, which is normal IMO for a file that is published as a movie. Maybe if you explained what you want to achieve?

Logic pro 7 session won't let me extend the length of my sequence

that slider at the top that lets you extend the length of your sequence won't budge passed 2318 or somenthing like that. Is their a cut off limit? why isn't it let me extend it any further?

This is from the Reference manual page 93
Song End
Below the song title, you’ll see a numerical field that indicates the song end position. As soon as Logic reaches this position, it will stop automatically, except when recording. In this situation, the song end point is automatically moved to the end of the recording.
The maximum length of a Logic song is 8550 quarter notes, or about 2158 bars in 4/4 time.
A song can therefore last a maximum of around 70 minutes at a tempo of 120 bpm. At 95 bpm, the maximum length is o ver an hour and a half.
If you need to increase this length, for film synchronization as an example, just halve the tempo. You can achieve the same result by using 4/8 time instead of 4/4 time, and treating quarter notes as eighth notes. A 4/8 song at a tempo of 60 bpm (equivalent to 4/4 at a tempo of 120) has a maximum length of more than 4273 bars, or over 2 hours and 22 minutes.

How do i find the length of a string??

trying to use the substring, I know the beginIndex (in my case 10), but the string will vary in size and so i need to find the last character and set it as the endIndex, how do i do this?
public String substring(int beginIndex,
int endIndex)Returns a new string that is a substring of this string. The substring begins at the specified beginIndex and extends to the character at index endIndex - 1. Thus the length of the substring is endIndex-beginIndex.
Examples:
"hamburger".substring(4, 8) returns "urge"
"smiles".substring(1, 5) returns "mile"
Parameters:
beginIndex - the beginning index, inclusive.
endIndex - the ending index, exclusive.
Returns:
the specified substring.

Hi
To substring the string where u know the begin index and want to extract till the end use the following function from the String class of the java.lang package
String substring(int beginindex);
String test = "Hello";
String xx = test.substring(1);
The Value stored in xx will be ello
This is in case u need till the end of the String
If wanna skip the last character u can
use
String substring(int beginindex,int endindex);
String test = "Hello";
String xx = test.substring(1,test.length()-1);
The Value stored in xx will be ell

Email attachment name in sender mail adapter to the receiver file adapter

HI ,
Ths is regarding email to file scenario. I am trying to create file (in rceiver file adapter) with the same name as the email attachment that i read from mail sender adapter. I want ro use adapter module for this. I could find from blogs that there is module - GetAttachmentName - available that i can use for this in sender mail adapter.
Can you please let me know what whetehr i neeed to mention any module key and parameters for this.
I assume , i need to do following steps :Please confirm.
1. i can use this module - after payload swap module and before standard mail adapter module in sender mail adapter
2. select ASMA option in advanced tab in sender mail adapter
3. In receiver file adapter select ASMA option in advanced tab in sender mail adapter
4. Also select file name option in ASMA in sender mail adapter
Thanks,
Vamsi

Hi Vamsi,
your scenario is also described here: Re: sender mail adapter - attachment name
If you use the Module getAttachmentName, which is described here,
http://wiki.sdn.sap.com/wiki/display/XI/AdapterModulePI7.0GetAttachmentName
your scenario should work as you described it.
You just need to make sure that the Attachment Name that you read in the first place, is mapped to the Filename Attribute of the
Fileadapter (http://sap.com/xi/XI/System/File/FileName).
regards,
Daniel

How is the length of a string calculated in Java? and JavaScript?

Hi all,
Do any of you know how the length of a string is being calculated in Java and JavaScript? For example, a regular char is just counted as 1 char, but sometimes other chars such as CR, LF, and CR LF are counted as two. I know there are differences in the way Java and JavaScript calculate the length of a string, but I can't find any sort of "rules" on those anywhere online.
Thanks,
Yim

What's Unicode 4 got to do with it? 1 characteris 1
character is 1 character.
strings now contain (and Java chars also) is
UTF-16 code units rather than Unicode characters
or
code points. Unicode characters outside the BMPare
encoded in Java as two or more code units. So it would seem that in some cases, a single
"character" on the screen, will require two charsto
represent it.So... you're saying that String.length() doesn't
account for that? That sux. I don't know. I'm just making infrerences (==WAGs) based on what DrClap said.
I assume it would return the number of chars in the array, rather than the number of symbols (glyphs?) this translates into. But I might have it bass ackwards.

The length of the password entry field in the BEx Analyser

Hi,
The password is 8 characters in the BW system.
When users changing their newly assigned passwords. When logging into the BEx Analyser, and prompted to change the password, a password entry box is displayed, with an entry field longer then 8 characters. Some users are therefore entering passwords longer then 8 characters. This is fine when they first login, but when they try come back to the system, their logon fails.
Can something be done to restrict the length of the password entry field in the BEx Analyser?
Many Thanks
Jonathan

Hi Jonathan
we are having the same problem - did you find a way to resolve this? I did not find any SAP notes referring to the issue.
Regards
Hayley

Adaptation of the length of a slide to a sound

Similar Messages

Maybe you are looking for