Adapter Engine and Int. Engine
Of AE and IE, which is on ABAP stack and which is on JAVA Stack,
-Naveen.
Hi,
AE is on Java stack apart. IDoc and HTTP adapter are on ABAP stack.
Integration engine on ABAP stack.
Regards
Vijaya
Similar Messages
-
Installation and then Configuration of Plain J2se Adapter Engine
Hi All,
Actually we want to use JMS Adapter for that we had installed Plain J2SE Adapter Engine but after installing and following the initial steps of Adapter.pdf we are not able to access the Adapter Engine through URL.We are using the URL http://<hostname>:8200/MessagingSystem/receive/AFW/XI
this URL is there in our SLD but we are not able to access the page.
So Please can somebody help me to resolve this issue.
Thanks & Regards
SathyaHi Amol,
I am trying to send read data from MQSeries using JMS adapter. We are successful in opening the Adapter Engine and the GUI. We have cofigured the adpter as follows. But when we try to restart the adapter to get the changes get saved we are getting the following error
<b>"ERROR CALLING THE RESTART ADAPTER"</b>
Also status is shown is yellow and version is shown as not set.
Where ever I have changed the configuration data I have shown it in bold
JMS-Adapter Configurarion
This Configuration is a sample for a JMS sender channel (inbound, sends to XI IS)
Set XI message protocol version. This sample is designed for XI 3.0
version=30
JMS message receiver class
classname=com.sap.aii.messaging.adapter.ModuleJMS2Transport
set if a transacted JMS Session should be used (default: true)
#JMSSession.sessionTransacted=false
set delay in milliseconds before processing next message after an error (default: 0)
errorDelay=10000
#set delay in milliseconds before trying to reestablish the JMS Connection after a connection error (default: -1 (do not try to reconnect))
#reconnectDelay=10000
set the Message Formats you want to process (Formats only needed if they can not be evaluated at runtime)
TransportMessage Type can be set to TransportMessage of XMBMessage. It is used for sending and receiving Transport and XMBMessages
#TransportMessage.type=TransportMessage
TransportMessage.type=XMBMessage
uncomment and adjust parameters for Transformation Type (Binding of JMS-Transport Message),
insert your class here for an individual binding between JMS and Transport Message
uncomment the following line for using Bindings that belong to Tunneling
#transformClass=com.sap.aii.messaging.adapter.trans.JMSTunneling
uncomment the following line for using Bindings that belong to Single Payload Binding
transformClass=com.sap.aii.messaging.adapter.trans.JMSSinglePayloadBinding
ID Garbage Collector: For EO(IO) handling XI adapters store the JMS/XI message ID's in the ID logger
Uncomment the following lines and change the default values if you recognized "out of memory" problems due to
very large ..\tech_adapter\Data\*_ID.dat files which will be kept in the memory as well
eoExpirationAfterDays is the period of keeping the message ID in days. Afterwards the message ID might be used again
garbageCollectorInterval is the period in milliseconds when the ID garbage collector is started. It will however only
be started if messages are exchanged otherwise ID logs won't be created anyway
eoExpirationAfterDays=365
garbageCollectorInterval=86400000
<b>#
the following parameters are used in some Bindings that belong to Single Payload Binding needing XMBHeader Information
uncomment and adjust parameters according your requirements. Please note, that the party identfier needs not to be
configured in case of A2A scenarios.
#XI.SenderParty=Sender
XI.SenderService=MQSeries
#XI.ReceiverParty=Receiver
XI.ReceiverService=MTX
XI.InterfaceNamespace=http://xitest
XI.Interface=MI_Out_File
XI.TraceLevel=1
XI.LoggingLevel=1
XI.QualityOfService=EO
XI.QueueId=ABCD
XI.ContentType=text/xml
#</b> *************************************************************************************************************
<b>#
URL of XI IS to send the messages to
XI.TargetURL=http://bwxi:50000/sap/xi/engine?type=entry
XI.User=XIAF
XI.Password=XIPASS
#</b> *************************************************************************************************************
URL of file adapter if a loopback JMS to File should be configured
XI.TargetURL=//localhost:8210/file/receiver
<b># uncomment the following settings if needed (independent on JMS provider)
JMS.QueueConnectionFactoryImpl.user=xisuper
JMS.QueueConnectionFactoryImpl.password=xxx
#</b>
uncomment and adjust parameters for loading JMS administrated objects via JNDI
uncomment and adjust parameters if not the default context should be used
#JNDI.InitialContext.property.1=java.lang.String {javax.naming.Context.INITIAL_CONTEXT_FACTORY}, java.lang.String com.sap.engine.services.jndi.InitialContextFactoryImpl
#JNDI.InitialContext.property.2=java.lang.String {javax.naming.Context.PROVIDER_URL}, java.lang.String localhost:50004
#JNDI.InitialContext.property.3=java.lang.String {javax.naming.Context.SECURITY_PRINCIPAL}, java.lang.String Administrator
#JNDI.InitialContext.property.4=java.lang.String {javax.naming.Context.SECURITY_CREDENTIALS}, java.lang.String sap
set the Lookup Names
#JMS.JNDILookupNameQueueConnectionFactory=jmsfactory/default/joetest
#JMS.JNDILookupNameQueue=jmsQueues/default/sapDemoQueue
uncomment and adjust parameters for loading JMS administrated objects from filesystem ***
#JMS.FileNameQueueConnectionFactory=SAPQueueConnectionFactory.ser
#JMS.FileNameQueue=SAPQueue.ser
uncomment and adjust parameters for creating SonicMQ JMS administrated objects ***
JMS.QueueConnectionFactoryImpl.classname=progress.message.jclient.QueueConnectionFactory
JMS.QueueConnectionFactoryImpl.constructor=java.lang.String localhost:2506
JMS.QueueImpl.classname= progress.message.jclient.Queue
JMS.QueueImpl.constructor=java.lang.String SampleQ1
<b># uncomment and adjust parameters for creating MQSeries JMS administrated objects ***
JMS.QueueConnectionFactoryImpl.classname=com.ibm.mq.jms.MQQueueConnectionFactory
JMS.QueueConnectionFactoryImpl.method.setHostName=java.lang.String BWXI
JMS.QueueConnectionFactoryImpl.method.setChannel=java.lang.String JAVA.CHANNEL
JMS.QueueConnectionFactoryImpl.method.setTransportType=java.lang.Integer {com.ibm.mq.jms.JMSC.MQJMS_TP_CLIENT_MQ_TCPIP}
JMS.QueueConnectionFactoryImpl.method.setQueueManager=java.lang.String QM_BWXI
JMS.QueueImpl.classname= com.ibm.mq.jms.MQQueue
JMS.QueueImpl.constructor=java.lang.String postcard
JMS.QueueImpl.method.setTargetClient=java.lang.Integer {com.ibm.mq.jms.JMSC.MQJMS_CLIENT_NONJMS_MQ}
#</b> *************************************************************************************************************
uncomment and adjust parameters for using a dispatcher ***
#Dispatcher.class=com.sap.aii.messaging.adapter.ConversionDispatcher
#Dispatcher.namespace=namespace1
#namespace1.ConversionDispatcher.logPayload=true
#namespace1.Service.1=Plain2XMLService
#namespace1.Plain2XMLService.class=com.sap.aii.messaging.adapter.Conversion
#namespace1.Plain2XMLService.xml.conversionType=SimplePlain2XML
#namespace1.Plain2XMLService.xml.processFieldNames=fromConfiguration
#namespace1.Plain2XMLService.xml.fieldNames=a,b,c
#namespace1.Plain2XMLService.xml.fieldSeparator=;
#namespace1.Service.2=XSLTService
#namespace1.XSLTService.class=com.sap.aii.messaging.adapter.XSLTConversion
#namespace1.XSLTService.XSLTConversion.XSLTFileName=Data/DemoConversion.xsl
Can you please help me in resolving the error.
Regards, -
J2SE adapter engine and SSL testing
Hi there,
We are currently doing a B2B scenario whereby SAP XI sends a message to the J2SE adapter engine in the DMZ and then that sends the message via HTTPS / SSL to the receiving service....
In order to test that the HTTPS / certificate etc worked I wrote a small Java application and dialled out of the network. I inserted the DER file into my CACERTS file on my local machine using the keytool as a "trusted certificate". The Java application worked 100% and did the SSL handshake fine and POSTED the data fine as well......
Now I am no expert in the J2SE adapter engine but decided to try testing the same SSL connection using the J2SE adapter engine from my LOCAL machine with me dialled out onto the Internet.
I logged into the J2SE adapter engine and imported the same DER file into the engine (actually inserted into the "truststore.jks" file). I them went into the "Test Environment" of the J2SE adapter and have been trying to test.....
I have a few questions:
1. Do I have to use a P12 or PFX file for this sort of communication? Reason I ask is that with the Java application all I needed was the DER file?
2. In the full blown scenario do I have to have SSL configured between XI and the J2SE adapter engine as well? Or can that stay as HTTP?
My basic config for the test is roughly:
WS.targetURL=https://someserver:4433/soap/someInbox
WS.SOAPAction=CustomSoapAction
SSLauthentication=true
Do I really need the following two?
SSLcertificate=somecert.p12
SSLcertificatePassword=somepassword
From my logic all I should need if the DER file loaded into the J2SE adapter which I have done......
Has anyone done successfull SSL / HTTPS testing from the J2SE adapter engine using the "Test Environment"?
Any advise would be greatly appreciated
Kind regards
LyntonHi
Not a answer to your question but why use the J2SE adapter engine in the DMZ and why not the J2EE Decentral Adapter Engine?
Regards
Bhavesh -
Auto restart of messages failed in Adapter Engine PI 7.0 and 7.1
Hi,
I am trying to figure out a way to automatically restart the messages failed with in the adapter engine (because of the target system not available etc.). These messages are in System Error status and I can restart them from RWB. But I am looking for any report or something available either on Java or ABAP engines so that I can automate the process.
Thanks for the help.
VJI have come across the web service AdapterMessageMonitoring in PI 7.0 (Found it in Web service navigator) with possibly useful methods. But I could not find the same service on PI 7.1. Any clue on this?
Also, the getMessageList methods works perfectly as expected but the resendMessages mehtod fails with the exception -
com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1="http://sap-j2ee-engine/client-runtime-error">Exception in method resendMessages.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException>
Will post more if move forward.
VJ -
Message ID in Integration Engine and Adapter Engine
Hello,
I have one question related to messages generated in XI.
Is the Message ID specified in the Integration Engine same as the Message ID used during the Message transformation in the Adapter engine?
What is the message flow once the message reaches XI and vice versa?
Regards,
Gajendra.Yes.it is the same ID used .
once the message reaches XI it goes thorough IS which has pipe line steps such as inbound processing receivr determination ,interface determination, techincal routing,mapping,outboundporcessing etc.
for more look at this link
http://help.sap.com/saphelp_nw04/helpdata/en/01/d9d43fb9490c65e10000000a114b1d/frameset.htm -
Why my Local Adapter Engine not showed in SLD and Integration Directory?
Hi guru,
I have installed one Local Adatper Engine on Host B, then an XI is installed on Host A, but After I installed the local adapter engine and follow the standard configration step mentioned in this document:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/307deae3-604e-2a10-feae-f016fb9cadd4.
After the configuration is done, I restart the local adatper engine, but this local adapter engine is not showed in integration directory.
what is the problem?The post-installation configuration steps are not complex, I exactly followed.
what other reason could it be? have any guru configured local adapter engine before? -
Difference between Testing Message in Integarion Engine and Adapter Engine
Hi Experts,
in project, we always test message in runtime workbench>component monitoring>integration engine-->Test Messge
however, i also find that in runtime workbench>component monitoring>adapter engine also exists a Test Message tab.
we don't have access to test messages in this tab, so can anyone tell that what is the difference between testing message in integration engine and adapter engine?
thanks in advance.The usual flow of messages in scenarios which use adapters at both sender and receiver end is as follows
Sender system -> Adapter Engine -> Integration Engine -> Adapter Engine -> Receiver system
When you use the testing option in IE, then you are basically posting the message directly to the Integration Engine.
When you use the testing option in AE, then you are trying to post the message to the adapter engine, which will then forward the message to the Integration Engine. IN this testing, you are also testing the sender adapter also.
Regards,
Ravi Kanth Talagana -
Adapter Engine not visible in SLD, RWB and Directory
Hi all,
I have problem with the registration of the adapter engine in my sld. When I search for it in Technical Systems doesn´t appears.
I have implemented SAP notes 764176 and 804124 and it doesn´t work.
My system is SAP PI 7.0 and the SLD is configured on a differente machine. The SAP PI machine can reach SLD machine (is not network problem).
Any suggestions?
Thank for your postings.Hi -
Do you have your SLD Data Supplier service (within Visual Admin tool) for PI Java server pointed to the host of the SLD machine? If so, you should at least see a Technical System (type Web AS Java) for your PI system in your SLD.
Regards,
Jin -
How to change connection port between INTEGRATION SERVER and Adapter Engine
Hi,
I have scenario that in the productions server we are using SAP web dispatcher to connect to Adapter Engine for example the port is 60000.
So when we copy this server to DR environment the webdispatcher is not there. is that any way to change the all connection port between IS and Adapter from 60000 back to original port 50000 ?
Please advise ?
Thank You and Regards
FernandHI,
The waiting status is because of Message Queue is in wiating status. This may be because of overload of the messages, or may be your receiver systems is not ready etc.
SO go to SMQ2 and check the status of the queues.
Also have a look into this blog-
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
<i>
Why I can see this messages only in the integration server?</i>
>>>If message reachs the Adapter engine, you can see in the Adapter monitor. In your case, message is still there in the Integration Engine. Once the queues are cleared it will reach the Adapter engine, so you can monitor it in the adapter engine
Regards,
Moorthy -
Adapter engine URL different between CACHE and RWB adapter engine URL?
Hi there,
If I go to SXI_CACHE and go to the adapter engine runtime cache I get a URL of:
https://<server>/MessagingSystem/receive/AFW/XI
NOTE: The above URL is HTTPS.....and there is no port in the above....
However, if I go to the runtime workbench and click on the adapter engine and click on "test message", I get the following URL:
http://<server>:<port>/MessagingSystem/receive/AFW/XI
NOTE: The above url is HTTP and there is a port.
How can I get these URL's back in sync?
I want them both to be HTTP.
Any ideas?
ThanksHello
1) Check the value of the Exchange Profile parameter 'com.sap.aii.connect.secure_connections'. If you don't wish to use HTTPS this should not have any value set.
2) Delete the Adapter Engine cache in trx sxi_cache -> Goto -> Adapter Engine Cache -> Delete Cache Contents (trash can icon).
The AE cache will be populated the next time a message is sent through the system. Check the value after this is done.
Regards
Mark -
What is an AFW connection and what is AFW Listener Bean in Adapter Engine?
What is the purpose of the above two in Adapter Engine ?
and also tell me what do we mean by:-
Sequencer for EOIO
Scheduler retry EO
Recieve/send QUeue.
I reffered d blog: /people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iHey,
Itz much better to be clear with the concept of adapters. FILE ADAPTER or with the concept of serialization of IDOCS in the idoc adapter.
Coming to the question
Consider While setting parameters for sending the data through file adapter in the processing parameters tab you have to set value for Quality dof service.
We have three option
Best Effort -> Used for synchronous processing.
EO refers to exactly once -> Used for Assynchronous processing of the mesage. Mesages will be processed once.
EOIO (Exactly Once In Order) -> Used for Assynchronous processing of messages in a sequence. We need to specify the queue name in this case.
In case of send u need to specify send queue, and receive Receive queue.
Messages will be processed in the same sequence as it arrives or leaves the integration process.
Cheers,
*Raj*
*REWARD POINT IF USEFULL* -
Message flow between advanced adapter engine and messaging system for ICO scenarios
Dear all,
I'm working on a PI 7.31 AEX box and created an ICO object for one interface with HTTP_AAE2IDoc scenario. The interface works quite well. When I looked in to message log of messages for this interface in PI monitor, I noticed that the internal XI message are put totally 5 times into the send queue and retrieved from send queue. In some steps I only see after retrieving a message from send queue and immediately put it back into send queue. Can someone please kindly explain the message flow between advanced adapter engine and messaging system and what exactly happens after each retrieving a message from send queue?
Below is an example of message log for one message:
12/08/2014 09:26:06.472 Information MP: processing local module localejbs/CallSapAdapter
12/08/2014 09:26:06.472 Information Application attempting to send an XI message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.478 Information Trying to put the message into the send queue
12/08/2014 09:26:06.499 Information Message successfully put into the queue
12/08/2014 09:26:06.499 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.499 Information The application sent the message asynchronously using connection HTTP_AAE_http://sap.com/xi/XI/System. Returning to application
12/08/2014 09:26:06.500 Information HTTP adapter successfully processed interface PlantResponse_Out
12/08/2014 09:26:06.501 Information Trying to put the message into the send queue
12/08/2014 09:26:06.501 Information Message status set to DLNG
12/08/2014 09:26:06.513 Information Message successfully put into the queue
12/08/2014 09:26:06.513 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.515 Information Message status set to DLNG
12/08/2014 09:26:06.533 Information Trying to put the message into the send queue
12/08/2014 09:26:06.548 Information Message successfully put into the queue
12/08/2014 09:26:06.548 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.550 Information Message status set to DLNG
12/08/2014 09:26:06.551 Information Executing Request Mapping "http://styrolution.com/pi/Integration/PlantMaintenance/PlantResponse/PlantResponse_to_Zcol_Basf_Inotif02_Inotif01_Zeupm_Inotif01_Ludwigshafen" (SWCV 085d2320fb3b11e2cc0bf4d50aea8c33)
12/08/2014 09:26:06.563 Information Trying to put the message into the send queue
12/08/2014 09:26:06.571 Information Message successfully put into the queue
12/08/2014 09:26:06.571 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.573 Information Trying to put the message into the send queue
12/08/2014 09:26:06.573 Information Message status set to DLNG
12/08/2014 09:26:06.580 Information Message successfully put into the queue
12/08/2014 09:26:06.580 Information The message was successfully retrieved from the send queue
12/08/2014 09:26:06.582 Information Message status set to DLNG
12/08/2014 09:26:06.583 Information Delivering to channel: IDOC_R
12/08/2014 09:26:06.583 Information MP: processing local module localejbs/IDocOutboundModuleBean
12/08/2014 09:26:06.583 Information XI message received for processing
12/08/2014 09:26:06.587 Information Sender Party: Sender Service:SXX Receiver Party: Receiver Service:RXXCLNT200 Communication Channel:IDOC_R
12/08/2014 09:26:06.588 Information IDOC metadata repository is RXX
12/08/2014 09:26:06.589 Information Control record is not mandatory - control record will be added if not available
12/08/2014 09:26:06.590 Information XML Payload parsed to idoc document list with number of idocs: 1
12/08/2014 09:26:06.595 Information Sending idoc message to receiver R/3 system with TID XIh{lsRI824UITC0009OalmW
12/08/2014 09:26:06.813 Information IDOC message sent to receiver R/3 system
12/08/2014 09:26:06.817 Information TID XIh{lsRI824UITC0009OalmW confirmed
12/08/2014 09:26:06.819 Information Message was successfully transmitted to endpoint <local> using connection HTTP_AAE_http://sap.com/xi/XI/System
12/08/2014 09:26:06.821 Information Message status set to DLVD
Thanks & regards
DingjunHello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari. -
In detail architecture of Adapter engine and Adapter framework
Hi,
Can somebody give me the archtecture of adapter angine and adapter framework and how how the message will be process by the adapter engine after receving the message from the messsaging service in detail.Hi Santosh,
Check these for Adapter Framework and Adapter Engine:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41">Adapter Framework</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8">Adapter Framework and Adapter Strategy</a>
Adapter Engine:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6b9f17e1-0901-0010-45ac-a9a124b44a82
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
Regards,
Subhasha Ranjan -
How do you differentiate PCK and adapter engine
how do you differentiate PCK and adapter engine?????
HI Gabriel,
the PCK is used,if you want to exchange Messages from or to XI. That means for that,you need on the sender or receiver Side a XI System. The one way is,that a XI sends the Native XML SOAP Messages via XI Adapter to the PCK.Then the message can be converted in some other formats,because the PCK has its own Adapter Engine. But there is no IDOC adapter.
The second way ist,that for example you pick up XML Files with the PCK and transfer it to an XI system in the Native XML Format. With the PCK you can't do a File-to-File Transfer.
The PCK is a standalone Application,which has its own Monitoring,Configuration and User Management.Instead of that, a decentral Adapter Engine is directly connected to an XI System and is configured centrally in the XI System
PCK is a mini version of XI. It is used by smaller business partner (who cannot afford to install a full blown version XI) to exchange XI messages with large companies (having an XI installation).
PCK has its own local Adapter engine.
Check the following links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/34a1e590-0201-0010-2c82-9b6229cf4a41
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f83d790-0201-0010-629d-ab5bf10c94e4
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/content.htm
http://help.sap.com/saphelp_glossary/en/6d/9c44b95c168e4cb500bb430ec193cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/99/115281baba404890d2561617a78409/content.htm
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-1
/people/siva.maranani/blog/2005/08/30/pck-cross-sectional-analysis-part-2
Hope this helps.
Cheers...
Vasu
<b>** REward Points if found useful **</b> -
Need the difference between Adapter Engine and Advanced Adapter Engine
Hello All,
I am new to PI 7.1. Have knowledge on how message flow goes(PipeLine steps) in the Adapter Engine of PI 7.0.
Now I have few doubts regarding the pipe line steps in PI 7.1. Whether they are similar to that of PI 7.0 or is there any change in the process? Can anyone help in explaining this difference?
Regards,
AchariHello All,
Thanks for the prompt responses and with best information, But apart from this,I need how an adapter(File/JDBC) works along
with AAE in PI 7.1. When does the job of File/JDBC adapter is completed and resumed in a synchronous case. That is,
File Location --> file adapter -
> XI(AAE) --> JDBC adapter --> database.
In file sender, lets suppose we have synchronous settings(Best Effort). Now when File adapter's job is finished and when it
gets back the response back from XI. Please explain step by step from starting(file adapter polling the location) to getting the response coming back to XI.
Regards,
Achari. -
Adapter Engine missing in SLD and RWB
Hi all,
I have no Adapter Engine in RWB or under technical systems in the SLD.
In Integration Directory I have "central adapter engine" in the adapter engine field in my File adapter .
But I get this message when I open the communication Channel:
"No SLD elements of type SAP_XIAdapterFramework found"
Please advice,
Thanks!Hi Thomas,
Your Adapter Framework is probably not registered in the SLD. You may force the
registration if you perform the action as follows:
1. In the J2EE administrator tool in cluster - server - services - deploy
(application view), stop the J2EE applications:
a. sap.com/com.sap.aii.af.service.cpa.monitor
b. sap.com/com.sap.aii.af.
2. Restart the sap.com/com.sap.aii.af application.
Refer sapnote in chapter 8.2 for more in the link provided below on Trouble shooting.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Cheers,
Ram.
Maybe you are looking for
-
I m running a query taking more time more than 20 minutes. But if I am changing the values in the where clause, its doing fast. I am not changing the query , only i change the numeric value used in the where condtion. I thing its a factor of LOCK. Ho
-
Can't change the keyboard layout in Xorg
I tried the different possibilities in the wiki to change the keyboard layout in X. setxkbmap does work, but I'd like to keep the settings across reboots. I tried the two methods in the wiki, here are my config files: /etc/X11/xorg.conf.d/00-keyboard
-
Importing a physical topology into a new, empty 11g.1.1.5 master repository from a working 11g.1.1.5 master repository fails with error message: java.lang.String cannot be cast to com.sunopsys.sql.Dbint A review of the target Physical Technologies (e
-
Why do I have to touch links twice on my Ipad 1?
I don't know what's going on or when it happened? But now I have to touch links twice in order to get things to open on my ipad1. For example. I go to a newspaper website, say www.mlive.com. The first time I touch a link to a news story it just h
-
we only use 08 at work and I have 06. Work gave me the product key, but I can't figure how to enter the key so I can open the 08 download.