Adapter function [fconnect] failed
Hi All,
I am using FDM 11.1.2.1 in a distributed architecture. With FDM Web Manager is installed on one machine and other components are installed on the other server , using installation by tier option.
Everything is working fine including HFM & Financial Reporting.
I have created the FDM application on the server having components such as Application Server , Load Balance & Task Manager Configuration.
While accessing the application from Web Interface i am getting the following error.
*Getting error : " Adapter function [fconnect] failed " while trying to access Activities---> Maps.*
I have tried almost everything but no luck.
I have registered the adapter using fm11xge.dll file .
Every server is configured using same Administrator user.
Can any one help me out to resolve this error.
Thanks in Advance.
You need to both register and configure the adapter. The adapter runs as a com+ application on the FDM server and requires that the service account be set on the identity tab in order to properly launch the adapter and connect to HFM. You can configure the adapter via the workbench client:
a) Expand Target System Adapters > FM11x-G5-E
b) Right-Click on the adapter and choose Configure
c) Enter the FDM Service account uid/pwd/domain values and click OK
This will set the identity on the com+ application and allow for FDM to integrate with HFM successfully via the connect action.
Similar Messages
-
Hi ALL!!!
I am trying to Export Data from FDM to HFM and clicked "Export" option and getting below error.
Error: Adapter function [fConnect] failed.
Detail: Stacktrace:
upsWBlockProcessorDM.clsBlockProcessorClass.ActLoad(strLoc[String], strCat[String], strStartPer[String], strEndPer[String], strFile[String], objLoadParam[Object&], blnNoRaiseEvents[Boolean], lngMarshalType[Int32])
Hyperion.FDM.Dialogs.TargetSystemLoadDialog.buttonOK_ServerClick(sender[Object], e[EventArgs])
And followed the John suggestions through this Link (http://epm.jonhwilliams.com/adapter-function-fconnect-failed-fd/), All the checks are good, But still issue has not been resolved.
Could some one please suggest your valuable inputs.
Thanks,
RSVCan you check if the integration options "Use SSO" and "Enable Sticky Server" are set to on?
-
Data Services 12.2.3.0 BODI-1112015 Adapter metadata import failed
Hi Experts,
I am using Data Services 12.2.3.0.
I have an issue in importing functions through 'Adapter' type datastore into Data Services. I can open the datastore and see the list of functions available, but when I try to import them, I get the error BODI-1112015 Adapter metadata import failed.
The setup and the errors are as below.
The adapter datastore is setup as below.
I built a new keystore called clientkeystore.jks in the ..\bin.Then created the .CSR file, and then imported the signed chained (I believe it's chained certificate) certificate of the server hosting the wsdl into the keystore.
Thanks for the post http://scn.sap.com/thread/1589052 . After changing the metadata character set to utf-8, I can see a list of functions when I open this New_Datastore in Data Services. It proves that the setup for the datastore has no problem parsing the wsdl file and give me the list of functions in it.
However, the error appears when I try to import them.
Error is:
Adapter metadata import failed. Error message: (BODI-1112015) Error parsing the <TheFunctionToBeImported> included in the XML sent by the adapter to represet a function <Error importing XML Schema from file <adapter_schema_in.xsd>:<XML parser failed: Error <Schema Representation Constraint: Namespace 'http://result.form.v81.api.keysurvey.com' is referenced without <import> declaration> at line <13>, char <46> in < < xsd:schema xmln:xsd=http://www.w3.org/2001/XMLSchema" xmln:tns="http://result.form.v81.api.keystore.com" xmlns:diws="http://businessobjects.com/diwebservice" targetnamespace="http://www.businessobjects.com/diwebservice"><xsd:import namespace='http://v81.api.keysurvey.com' schemaLocation='C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice\FormResultManagemenetgetRespondentsgetRespondents0.xsd'/>
<xsd: import namespace='http://result.form.v81.api.keysurvey.com' schemaLocation='C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice\FormResultManagemenetgetRespondentsgetRespondents2.xsd'/> ........
When comparing it with the wsdl file(as below), it is worth nothing that the schemaLocation is changed to a local directory under C:\Program Files\Business Objects\BusinessObjects Data Services\ext\webservice while it was not the case in wsdl. The schemaLocation is on the server.
I am wondering if the redirection from the server specified in the wsdl file to the local directory has caused this error. The error 'namespace is reference without <import>' is apparently wrong as the <import> is just there.
Or there is any other reason behind this.
I appreciate any adivce or question from you!I have reached the exact same error as this post http://scn.sap.com/thread/3190403
The error is
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_builder.c(876) Specifyingservices and modules directories using axis2.xml but path of the library directory is not present
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_builder.c(261) Processing transport senders failed, unable to continue
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\dep_engine.c(939) Populating Axis2 Configuration failed
[Mon Jun 18 23:14:28 2012] [error] ..\..\src\core\deployment\conf_init.c(195) Loading deployment engine failed for client repository C:\Program Files (x86)\SAP BusinessObjects\Data Services\ext\webservice-c\axis2.xml
As it is identified as an version problem, this issue is not going to be investigated any further.
As an alternative, can try to use Oracle 11g SOAP_API.sql. -
Crystal Report XI u2013 Multi Thread - function PEOpenEngineEx failed. Reason:
In Crystal Report XI u2013 Multi Thread - function PEOpenEngineEx failed. Reason: Report engine not opened
Hi
I am using Crystal report XI with Delphi 7
OS: Windows XP.
Delphi 7
CR Version: Crystal Report XI
In Crystal Report XI While calling PEOpenEngineEx() by setting Engine option as multi thread, It failed with error message u201CError:512 Report Engine Not Openedu201D
Code Change in Delphi 7 UCrpe32.pas (Crystal Reports XI Release 1 - Service Pack 3 and Service Pack 4)
aEngineOptions.openEngineType := PE_OE_MULTI_THREADED;
FEngineOpened := FCrpeEngine.PEOpenEngineEx(EngineOptions);
I tried the same with Crystal Report 8.5 (above mentioned code change) Function PEOpenEngineEx() working fine.
How to overcome this error to make work Multi Thread using CR XI?I found that it is bug Release 2 and the script server_patch_xir2 resolved it.
-
Adapter metadata import failed
I get 'Adapter metadata import failed' error while trying to import a put operation in the Business Objects Data Services designer in the JMSADAPTER type datastore. The xsd file is in place but the error message says that 'File <ADAPTER_MESSAGE_SCHEMA.XSD> is not a valid XML schema. The XSD that I specified in the operation is of a different name, and am not able to figure out where an XSD for this name comes in.
The same job in the same repository happens to work with no errors on a different Job server.The error it gives is 'File <ADAPTER_MESSAGE_SCHEMA.xsd> is not a valid XML Schema specification.'
Edited by: ssharma6 on Apr 9, 2010 11:28 AMI have DI 11.7.3.2 and the error is almost the same, BODI-1112010 : metadata import failed, the service is define as:
http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort
and the wsdl file is:
http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort/wsdl/v1/alert/services/wowlink/woolworths/com/au/AlertService.wsdl
this service is not using http basic authentication, the security is inside every object.
Looks that DI probably is transparently following the HTTP redirect from
http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort?wsdl
to:
http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort/wsdl/v1/alert/services/wowlink/woolworths/com/au/AlertService.wsdl
Then when it attempts to resolve v1.alert.services.wowlink.woolworths.com.au.wsdl , it issues a request for:
http://clwlkd2:19080/.wowlink-services-router-http/services/ v1.alert.services.wowlink.woolworths.com.au.wsdl
instead issuing a request for:
http://clwlkd2:19080/.wowlink-services-router-http/services/IAlertPortTypePort/wsdl/v1/alert/services/wowlink/woolworths/com/au/v1.alert.services.wowlink.woolworths.com.au.wsdl
which is where the resource actually is.
Did someone see this redirection issue before? -
Enhancement of File Adapter Functionality.
We are trying to do some complex functionality and the file adapter doesnot support the functionality.Are there any guides/docs/SAP NOTES which helps us to enhance the standard file adapter functionality.
Hi,
Have you heard about the dispatcher functionality in the adapter engine? Maybe is that an option for your functionality requirements.
Please have a look at:
http://help.sap.com/saphelp_xi20sr1/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Some information about the dispatcher:
<i>Most of the adapters in the Adapter Engine include a dispatcher that can process a series of user exits for converting messages. For example, this dispatcher enables you to carry out file/FTP adapter conversions, XSLT transformations, or Java-based transformations either individually, or combinations of all three.</i>
Or you can also have a look at the PCK (Partner Connectivity Kit), which can be used to develop you own adapters...
Some details about the PCK:
<i> The SAP Partner Connectivity Kit (PCK) enables smaller companies that do not dispose of an SAP XI installation to connect to SAP XI.
Customers and partners can also develop their own adapters for SAP XI. To do this, they can use the Adapter Framework in the Partner Connectivity Kit (PCK) and refer to the detailed documentation on adapter development. For more information, see SAP XI 3.0 Online documentation under SAP XI: Runtime → Connectivity → Partner Connectivity Kit → Adapter Development. </i>
Cheers,
Rob
Message was edited by: Rob Viana -
hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
HernandoHello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM -
Hi
while trying to execute CHECKDB in Db13 i was getting the following error message
My Operating system is windows 2003 database oracle 10g
already referred to notes 952080, 134592 and subsequent notes
E:\ORACLE\NPE\ORIGLOGA\CNTRL\CNTRLNPE.DBF 26066944 4 FILE NOLINK
E:\ORACLE\NPE\ORIGLOGB\CNTRL\CNTRLNPE.DBF 26066944 4 FILE NOLINK
D:\ORACLE\NPE\SAPDATA1\CNTRL\CNTRLNPE.DBF 26066944 3 FILE NOLINK
BR0982I Database disk volumes
Directory / Raw disk Device Total[KB] Free[KB] Used[%] MaxNeed[KB] MaxMiss[KB]
BR0252E Function _stat() failed for 'D:\oracle\EO1\102' at location BrDiskStatGet-1
BR0253E errno 2: No such file or directory
BR0277E Determination of disk volume status for D:\oracle\EO1\102 failed
BR0806I End of BRCONNECT processing: ceadprqb.chk 2009-03-17 18.06.25
BR0280I BRCONNECT time stamp: 2009-03-17 18.06.25
BR0804I BRCONNECT terminated with errors
if any faced simlar problem, please give let me know if you have a solution.
Regards
HMHello,
this type of error happens when there are permission problems. Check permission of BRtools
Check the permission of files..Check the link below for more information :
http://www-01.ibm.com/support/docview.wss?rs=667&context=SSZHVN&dc=DB560&dc=DB520&uid=swg21327498&loc=en_US&cs=UTF-8&lang=en&rss=ct667tivoli
Thanks
Anju -
BR0252E Function mkdir() failed for adding the data file
Dear experts.
I assigned new file to data file, i face below error
BR0280I BRSPACE time stamp: 2010-12-15 10.38.26
BR0681I Enter string value for "file" (<file>|<sapdata>|<N>) [/oracle/DBP/sapdata7/sr3_70/sr3.data69]:
/oracle/DBP/sapdata8/sr3_70/sr3.data69
BR0280I BRSPACE time stamp: 2010-12-15 10.38.46
BR0683I New value for "file": '/oracle/DBP/sapdata8/sr3_70/sr3.data69'
Error
BR0252E Function mkdir() failed for '/oracle/DBP/sapdata8/sr3_70' at location BrDirCreate-1
BR0253E errno 13: Permission denied
Regards,
kalees>>BR0252E Function mkdir() failed for '/oracle/DBP/sapdata8/sr3_70' at location BrDirCreate-1
Make sure the sapdata8 is owned by ora<SID> and dba group.
and you are adding the datafile using ora<SID> userID. -
Hi all,
I am working on setting up the DB13/BRTOOLS integration.
I am trying to run a db check from sidadm user through brtools and getting the below error.
BR0280I BRTOOLS time stamp: 2014-04-24 09.35.56
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0252E Function fopen() failed for '/oracle/PB1/sapbackup/.user.pas' at location BrToolCall-2
BR0253E errno 13: Permission denied
I changed the permissions for br* to 755 as below
but still I am getting the same error.
ustrlxpb1db80:pb1adm 73> ls -l br*
-rwxr-xr-x 1 pb1adm sapsys 5736689 Sep 7 2011 brarchive
-rwxr-xr-x 1 pb1adm sapsys 5854578 Sep 7 2011 brbackup
-rwxr-xr-x 1 pb1adm sapsys 7577045 Sep 7 2011 brconnect
-rwxr-xr-x 1 pb1adm sapsys 6279708 Sep 7 2011 brrecover
-rwxr-xr-x 1 pb1adm sapsys 2227868 Sep 2 2011 brrestore
-rwxr-xr-x 1 pb1adm sapsys 8033945 Sep 7 2011 brspace
-rwxr-xr-x 1 pb1adm sapsys 3090793 Sep 2 2011 brtools
What might be the issue?
Thanks
vimalHi Gaurav,
Thanks for your information.
I changed the persmissions for sapbackup and sapcheck to 775 and I can able to start the dbcheck via brtools through sidadm user.
But it got stuck with a below sql error , with insufficient privileges
BR0280I BRTOOLS time stamp: 2014-04-24 10.36.06
BR0257I Your reply: 'c'
BR0259I Program execution will be continued...
BR0801I BRCONNECT 7.20 (17)
BR0805I Start of BRCONNECT processing: censafis.chk 2014-04-24 10.36.06
BR0484I BRCONNECT log file: /oracle/PB1/sapcheck/censafis.chk
BR0477I Oracle pfile /oracle/PB1/112_64/dbs/initPB1.ora created from spfile /oracle/PB1/112_64/dbs/spfilePB1.ora
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.08
BR0813I Schema owners found in database PB1:
APPQOSSYS, DBSNMP, DIP, OPS$ORAPB1, OPS$PB1ADM, OPS$SAPSERVICEPB1, ORACLE_OCM, OUTLN, SAPSR3*, SYS,
SYSTEM
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.09
BR0814I Number of tables/partitions in schema of owner SAPSR3: 25128/247
BR0836I Number of tables treated as info cubes for owner SAPSR3: 1676
BR0814I Number of tables/partitions in schema of owner SYS: 890/298
BR0814I Number of tables/partitions in schema of owner SYSTEM: 151/39
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.12
BR0815I Number of indexes/partitions in schema of owner SAPSR3: 33103/502
BR0815I Number of indexes/partitions in schema of owner SYS: 965/242
BR0815I Number of indexes/partitions in schema of owner SYSTEM: 212/52
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0816I Number of segments in schema of owner DBSNMP: 8
BR0816I Number of segments in schema of owner OPS$PB1ADM: 1
BR0816I Number of segments in schema of owner OUTLN: 9
BR0816I Number of segments/LOBs in schema of owner SAPSR3: 21553/2395
BR0816I Number of segments/LOBs in schema of owner SYS: 2714/144
BR0816I Number of segments/LOBs in schema of owner SYSTEM: 407/22
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0961I Number of conditions found in DBCHECKORA: 128
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0301E SQL error -1031 at location BrDbdiffRead-1, SQL statement:
'PREPARE stmt_5 FROM'
'SELECT OBJNAME FROM "SAPSR3".DBDIFF WHERE DBSYS IN ('ORACLE', ' ') AND OBJTYPE = 'TABL' AND DIFFKIND IN ('02', '61', '99') ORDER BY OBJNAME'
ORA-01031: insufficient privileges
BR0806I End of BRCONNECT processing: censafis.chk 2014-04-24 10.36.13
BR0280I BRCONNECT time stamp: 2014-04-24 10.36.13
BR0804I BRCONNECT terminated with errors
BR0292I Execution of BRCONNECT finished with return code 3
Thanks
Vimal -
BR0252E Function remove() failed
While trying to extend the tablespace (PSAPCRM), I encounter an error :
BR1001I BRSPACE 7.00 (40)
BR0252E Function remove() failed for '/oracle/SID/sapbackup/.user.pas' at location global_set-5
BR0253E errno 13: Permission denied
BR0700E Fatal errors occurred - terminating processing...
BR1008I End of BRSPACE processing: seadhacx.log 2009-03-15 22.45.39
BR0280I BRSPACE time stamp: 2009-03-15 22.45.39
BR1007I BRSPACE terminated with errors
Any clues pls ?
Regards
ShajiHi Jacob,
Can you tell us with which user you are running?
I think there are some file permission are missing with that user id.
Please follow SAP NOTE 113747 to give sufficiant access privillages for BRTOOLS.
Regards
Nick Loy -
Dear All,
I am getting error log in sm21.Please guide.
Time Ty. Nr Cl. User Tcod MNo Text Date : 04.09.08
04:55:27 DIA 000 600 BASIS R49
Details
Recording at local and central time........................ 04.09.2008 04:55:27
Task................ 06664 / Dialog work process No. 00
User................ BASIS
Client.............. 600
Terminal............ 192.168.
Session............. 1
Transaction code....
Program name........ SAPMSSY1
Problem class....... K SAP Web AS Problem
Development class... STSK
Further details for this message type
Module name......... thxxcpic
Line................ 3582
Error text.......... 027242
Caller.............. ThCPICS
Reason/called....... CPIC-Er
Documentation for system log message R4 9 :
A CPIC function has failed. The conversation ID and CPIC function are
specified in the system log entries. Use the conversion ID to find
more detailed information about the error in the system log for the SAP
gateway.
Meaning of the SAP return codes:
1) Gateway errors:
221,,Error in CPIC-SS
222,,Storage bottleneck
223,,Network read error
224,,Network write error
225,,Invalid request
226,,No connection yet
227,,Gateway process terminated
228,,Shared-Memory problem(read)
229,,Shared Memory problem(write)
230,,No free LU
231,,No free gateway process
232,,Error when starting gateway proc.
233,,Incorrect communication type
234,,Connection setup failed
235,,Error in comm. table
236,,No connection to gateway
237,,Connection to gateway closed
238,,Error in GW command (write)
239,,Error in GW comm. (read)
240,,Invalid length
241,,Invalid environment
242,,Timeout
243,,Error setting up R/3 conn.
244,,Partner has closed connection
245,,Storage overflow
246,,Incorrect APPC header version
247,,APPC server not started
248,,Error accessing TXCOM
249,,Comm. table is full
630,,Invalid mode no. received
631,,Max.no. of gateways reached
632,,No LU specified
633,,Max.no. of clients reached
634,,Invalid TP name
635,,fork failed
636,,Invalid NI handle
637,,rexec failed
638,,TP start failed
639,,NiDgSend failed
640,,Internal error
664,,Gateway host is unknown
665,,Gateway service unknown
666,,NI error
667,,exec failed
668,,R/2 restarted
669,,Symb. destination too long
670,,No more side-info entries
Errors in the CPIC interface:
450 ,,No storage
451,,No side-info entry
452,,TP-START failed
453,,No initialization
454,,"getlu" failed
455,,"signal" failed
456,,Timeout during conn. setup
457,,CMALLC failed
458,,CMSEND failed
459,,Prepare-To-Receive failed
460,,"mc_flush" failed
461,,CMRCV failed
462,,Argument missing
463,,"get_allocate" failed
464,,CMDEAL failed
465,,TP-END failed
466,,Max.no.of conv. reached
467,,"snaopen" failed
468,,"snactl" failed
469,,No flush in IBM environment
470,,"snaclse" failed
471,,Status error
472,,No side-info entry
473,,No conversation
474,,Connection closed manually
475,,Connection closed automatically
476,,No partner found
477,,Confirm failed
478,,Confirmed failed
479,,GWHOST not in side-info entry
480,,GWSERV not in side-info e.
481,,PROTOCOL not in side-info entry
482,,LU not in side-info e.
483,,TP not in side-info entry
484,,No conn.to gateway
485,,gethostname failed
486,,SAP_CMACCP not executed
487,,Program not in argument list
488,,Host not in argument list
489,,Service not in argument list
490,,Conv-ID not in argument list
491,,Invalid parameter
492,,LU62CVCT failed
493,,LU62ATTCH failed
494,,No CONV table
495,,Incorrect conv.table
496,,Invalid conv modification
497,,NiHostToAddr failed
498,,NiAddrToHost failed
499,,Read operation tab.THOST failed
Technical details
File................ 006117
Position............ 0000025380
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R4 9
Variable parts...... 027242 ThCPICSCPIC-Erthxxcpic3582
Thanks,
KumarHi An
In the disp log. i have read note 124562 .
ERROR => DpRqCheck: T132 in stat TM_SLOT_FREE [dpxxdisp.c 5754]
***LOG Q0G=> DpRqBadHandle, bad_req (NOWP) [dpxxdisp.c 4570]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 3168): [dpxxdisp.c 4572]
-IN-- sender_id ICMAN tid 132 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_DP uid 13629 appc_ca_blk -1 type NOWP
-IN-- new_stat NO_CHANGE mode 0 len -1 rq_id 8195
-IN-- req_info DP_SOFT_CANCELDP_ICM_EVENT
ERROR => invalid MPI handle: 0 [mpixx.c 2201]
ERROR => invalid MPI handle: 0 [mpixx.c 2201]
SoftCancel request for T63 U13628 M0 received from ICMAN
ERROR => DpRqCheck: T63 in stat TM_SLOT_FREE [dpxxdisp.c 5754]
***LOG Q0G=> DpRqBadHandle, bad_req ( DIA) [dpxxdisp.c 4570]
ERROR => BAD REQUEST - Reason: DpRqCheck failed (line 5144): [dpxxdisp.c 4572]
-IN-- sender_id DISPATCHER tid 63 wp_ca_blk -1 wp_id -1
-IN-- action SEND_TO_WP uid 13628 appc_ca_blk -1 type DIA
-IN-- new_stat NO_CHANGE mode 0 len 0 rq_id 8199
-IN-- prio HIGH
-IN-- req_info DP_SOFT_CANCEL
Fri Sep 05 07:49:57 2008
DpHdlDeadWp: restart wp (pid=3172) automatically
DpHdlDeadWp: restart wp (pid=3252) automatically
Thanks,
Kumar -
Since Mavericks, the scroll-with-modifier-key-to-zoom functionality often fails, and I have to deselect it and reselect it in the accessibility pref-pane to get it working again.
Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
Good luck. -
So what is up with this error message in Muse?
MuseJSAssert: Error calling slector function:SecurityError: Failed to read the ‘contentDocument’ property from ‘HTMLIFrameElement’: Blocked a frame with orign “null” from accessing a cross-origin frame.This is a genuine security error generated by the browser when viewing a page with iFrame content locally.
Please refer to Zak's reply in the following thread: https://forums.adobe.com/message/6496180#6496180
Cheers,
Vikas -
The function PEOpenEngineEx fail
Hi,
I have BO XI SP 2 installed on linux server.
In /var/log/messages all the time below errors are writing:
Sep 11 15:19:26 stcrep2 boe_pagesd[30273]: The function PEOpenEngineEx failed. Reason: Report engine not opened..
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: Error in the report processing unit.
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: A Page Server subprocess was forced to terminate.
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: A Page Server subprocess was forced to terminate.
Sep 11 15:19:26 stcrep2 boe_pagesd[5889]: An error occurred while creating a Page Server subprocess.
Sep 11 15:19:36 stcrep2 boe_pagesd[30307]: The function PEOpenEngineEx failed. Reason: Report engine not opened..
How to correct BO server?
I will appreciate for help.
Regards
AnetaI found that it is bug Release 2 and the script server_patch_xir2 resolved it.
Maybe you are looking for
-
How to see movies In my IPAD IOS 8.2? Specially popcorntime
How to see movies In my IPAD IOS 8.2? Specially popcorntime
-
Command that Works in Terminal Not Running as Launch Agent
Trying to run the following command as a Launch Agent (OS X 10.7): /usr/bin/find /Users/username/Documents/Dropbox/Public -type f -mtime +2 -print0 | xargs -0 rm -r Created a plist file (reproduced below) and saved to ~/Library/Launch Agents, but the
-
Digital Signature Certificate algorithm
Hi Friends Please clarify below points as we are planning to use SHA 256 algorithm with digital certificate while signing using SECULIB libraray. 1) Does SAP support SHA 256 algorithm , if yes doesnt any additional library files are required. 2) Does
-
OMG... Time machine deleted ALL the backups, even latest..
Hey All... I have just experienced a nightmare. If anyone can help I would be in your debt. Here we go... I was trying to move the backup of old computer ( partition A ) to a new partition ( B ) on same ext. hard drive. Not enough space in partiti
-
I have already write a RMI example for self-study successfully, but there are a little class file problem that I'm not able fix it. In my RMI example there are 3 .java files (RMIServer.java, RMIClient.java and a MethodImpl.java) After I have javac an