Communication channel monitoring, adapter monitoring error

Hi ,
I am using SAP PI 7.0 with HP-UX.
Here we have 6 logical hosts in one physical host.
Physical host name is u2013 xyz
Integration server name u2013 sappid
The Central SLD: sappid
URL for sappid: sappid: 50300
When I monitoring RWB----
>communication channel monitoring, adapter monitoring, in Development system It's detecting another logical host ( like www://sapard:50300 )  and getting page cannot find error.
1.SLDCHECK
   http://xyz:50300/sld  
   host name: xyz
  port number: 50300
  user : SLDDSUSER
2.SXMB_IFR
   http://xyz:50300/rep/start/index.jsp
3.SMICM
   icm/server_port_0 = PROT=HTTP,PORT=8003
   icm/server_port_1 = PROT=SMTP,PORT=0
   icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
   icm/host_name_full = sappid
4. SLDAPICUST
    SAP_CONFIG   1   xyz   50300   SLDDSUSER
5. SXMB_ADMIN
    Role of Business System Integration Server
    Corresponding Integ. Server http://sappid:8003/sap/xi/engine?type=entry
   Integration Engine Configuration Data -> Check button
6.When I opened the http://xyz:50300/rep/start/index.jsp I got the
  XI start page.
    when I opened the http://sappid.AIG.com:50300/
   the page not found issue, when I opened http://sappid:50300/ I got the
   XI start page.
plz help me for this issue.
thanks in advance.
regards,
reddy.

Hello,
I think the FQDN is not set properly.
Problem in the parameter
SMICM
icm/server_port_0 = PROT=HTTP,PORT=8003
icm/server_port_1 = PROT=SMTP,PORT=0
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=50300
*icm/host_name_full = sappid *
Replace this parameter in instance profile
icm/host_name_full = sappid.AIG.com
Then in the host entry of your server please add an entry
172.18.23.233(ip your ur Xi server)       sappid.AIG.com
Then let us know the result.
Thanks and Regards
Vijay

Similar Messages

  • Link to Communication Channel and Adapter Monitoring not opening

    Hello All,
    we are on PI 7.0. In teh RWB, we are not able to see the Communication Channnel Monitoring as well the Adapter Monitoring It is giving Page cannot be Displayed.
    please tell us the way ahead.
    Regards
    Chakra and Somnath

    Hi Somnath,
    when the error occurs check the url of the page that cannot be displayed and verify if the hostname is correct.
    It could be a problem of not right setting in exchange profile.
    Also verify that you have enough authorization, trying to logon with PISUPER user if you can.
    Hope it helps,
    Regards,
    Sergio

  • Component monitoring - adapter engine error, but no channel in error actual

    Hi,
    We have a problem in displaying a status of Adapter Engine in RWB. In component monitoring there's a red light and the status - "Are communication channels without errors?" says there's an communication channel in error. But when I click the Communication channel monitoring, everything's green there. Yes, there was an error before, but it's ok now. Why is the AE item in Component monitoring still red? How to make it to reflect the current status?
    Thank you,
    Olian

    Hi Olian,
    i am saying to use the cache connectivity test button option from RWB -> compnent monitoring , so have you done cache test using this? if yes, click on refresh display to see the latest adapter engine status..............if it is green, then it is okay..............but if it is red here, it means some comm channel is erroring sometimes - i guess it can be a file adapter using ftp or some rfc adapter......................
    if it is green here and compnent monitoring - adapter engine status is red because some comm channel errored in past.........then i think some cache is not getting refreshed - i do not know exactly how to rectify it...........but i can tell you some workaround for it..............the comm channel which was erroring just stop it from comm channel monitoring........then close RWB and again open it and see compnent monitoring - adapter engine status again in it - i think it should be green now.......or  try by changing any comm channel description data in ID and save and activate it.........then again check your compnent monitoring - adapter engine status..................but dont worry i think this is a temporary problem
    Regards,
    Rajeev Gupta
    Edited by: RAJEEV GUPTA on Mar 26, 2008 11:50 AM

  • Automating Communication channel and message monitoring

    Hi,
    Right now i am trying to automate communication channel monitoring and message monitoring for  SAP PI. Kingly suggest me how can I go ahead and which language I can use(java or dot net) ?. I will be needing to generate a report for every half an hour about the status of the communication channel and for successfull and failed messages. Kindly assist on what criteria I can use.
    Kindly help on this.
    Thanks and regards
    Nagaraj

    Hi
    As far as i know there is not easy way to acheive it by calling some webservice or chacking DB table. I developed some tool in .net by calling direct webpage using HTTPRequest class
    Regards
    Maciej

  • Unable to find communication channel -XI adapter

    Hi Experts,
    I am doing a file - proxie scenario.
    I am unable to view the communucation channel I created for XI.
    I tried to refresh the Start complete cache refresh and tried to refresh the cache in IR and ID.
    I am able to see my Service(business sytem) in SXI _CACHE.
    Regards
    Kiran

    Hi ,
       What you hav created XI communication channel not visible in ID or RWB?? its not possible to monitor XI communication ,as already Suraj answered the reason,its not part of JAVA stack.
    Regards,
    Raj

  • Communication channel creation - Adapter typr missing

    Hi
    Im trying to create a communication channel between XI and ECC system and also XI and third part application.
    I imported the .TPZ file and Im trying to create a communication channel between XI and ECC.I click on create communication channel under the business system ECC.
    But after giving the communication channel name im unable to get any adapter type. There are no adapters here. Where should I configure this?
    Thanks
    Subbu

    Hi,
    To see the List of all the Adapter in Adapter list while creating the CC in ID, we have to Import the SAP BASIS 7.00 .TPZ file into IR
    Steps
    1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
    2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
    /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
    3) Goto Repository (Design)
    4) Choose -> Tools -> Import Design Objects
    Now the adapters should get displayed.
    Thanks
    Vikranth

  • ORA-03113: end-of-file on communication channel & ORA-00600: internal error

    Hi All,
    I am testing my database which is already on 11gr1 working fine for application but after migration from 11gR1 to 11gR2 i am getting the below error while running application on a view:-
    ORA-03113: end-of-file on communication channel
    Process ID: 3280
    Session ID: 35 Serial number: 11301
    Above Error gets resolved after changing the order of underline tables and recreate But their is another error i am getting with same test case means select from a view
    ORA-00600: internal error code, arguments: [kkqtSetOp.1], [], [], [], [], [],[], [], [], [], [], []
    This view is complex and nested. But working fine in 10g 11gR1. Please help...
    Edited by: 832546 on Feb 8, 2011 1:48 AM

    Hi,
    Above errors ORA-00600: internal error is resolved after i submit SR. They suggest to change parameter “_optimizer_join_factorization” to false.
    But i am still facing with another error with view on oracle 11gr2
    ORA-03113: end-of-file on communication channel...
    Below is the work around i done for "ORA-03113: end-of-file on communication channel"
    Join Condition for view is
    t1.VERSION=t2.VERSION
    and t1."PLAN"=t2.BASELINE_PLAN_ID
    and t1.PLAN_VERSION=t2.BASELINE_PLAN_VERSION
    If i run by just removing any one of above join condition is works fine but since i dont know business logic so i come up with solution below
    1. create table t111 as select * from t1;
    2. rename table t1 to abc
    3. rename t111 to t1
    Now it is starts working.
    I don't know what had happen but i find workaround not solution.
    If somebody suggest the solution and reason why this happening highly appreciated.
    Please Help....
    Edited by: 832546 on Feb 14, 2011 3:24 AM

  • Communication Channel RFC Sender getting error suddenly

    Hello gurus,
    I'd like to ask you about a problem, we have many interfaces from RFC to SOAP synchronous, the CC RFC sender, in an average of once per day, gets into red colour with this error:
    Sender channel 'CC_RFC_SENDER_L0_MAESTROS' for party '', service 'BS_LD0_100'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.adapter.rfc.RfcAdapterException: error
    initializing RfcServerPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException:
    can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION:
    Connect to SAP gateway failed
    Connect_PM TYPE=A ASHOST=10.1.4.191 SYSNR=00 GWHOST=10.1.4.191 GWSERV=sapgw00 PCS=1
    LOCATION CPIC (TCP/IP) on local host with Unicode
    ERROR partner 'XX.X.X.XXX:sapgw00' not reached
    TIME Thu May 27 03:56:04 201
    RELEASE 711
    COMPONENT NI (network interface)
    VERSION 39
    RC -10
    MODULE nixxi.cpp
    LINE 3151
    DETAIL NiPConnect2: 10.1.4.191:3300
    SYSTEM CALL connect
    ERRNO 111
    ERRNO TEXT Connection refused
    COUNTER 5
    I don't know the reason of this.. but simply just stopping and starting the CC it gets into green colour again..
    Does anyone know how to solve this?
    Regards,
    Juan.

    Hi,
    This happens if the RFC connection pool is not instantiated or may be cache failed to auto-refresh....And manual restart of RFC channel resolves it.
    Refer page 8 in the RFC troubleshooting guide.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f3f93ee7-0c01-0010-2593-d7c28b5377c2?quicklink=index&overridelayout=true
    Thanks
    Swarup

  • Communication Channel monitoring in PI 7.1

    Hi Folks,
        How to do the adapter monitering & Communication channel monitoring in teh sap PI 7.1.
    Regards,
      Santosh

    Hi,
    Have you searched in SDN,??
    there is no difference compare to other versions
    RWB-->ComponentMonitoring>Adapter Engine->Communication channel monitoring--->select communication Channel.fileter,then monitor it.
    Regards,
    Raj

  • XI communication channel missing in communication channel monitoring

    Hello partners,
    I have a problem with communication channel monitoring.
    I have defined a communication channel of Adapter Type = "XI" in the integration directory.
    I have also sent messages successfully via this communication channel.
    But the communication does not appear in the list of available channels in the selection list of the communication channel monitoring.
    Can someone tell me how I can get monitoring info of an "XI" communication channel?

    Hi,
    From SP17, you have a new feature
    http://help.sap.com/saphelp_nw04/helpdata/en/44/46d1a56faf52d3e10000000a1553f6/content.htm
    <i>The Runtime Workbench has the following new functions:
    &#9679; Component monitoring: Communication channel monitor
    In component monitoring, you can use the new communication channel monitor to call information about the status of your communication channels and the corresponding adapters. You can also administrate your communication channels.
    Unlike the adapter monitor, the communication channel monitor also provides current runtime information about the communication channels of individual adapters, as long as they are registered for communication channel monitoring.
    To monitor adapters that do not provide runtime information to communication channel monitoring, continue to use the adapter monitor.</i>
    Regards,
    Bhavesh

  • Automatic monitoring of operational communication channels

    Hi,
    Can anyone tell me if there is a possibillity to automatically monitor the runtime status of the operational communication channels?
    For instance the forwarding of the messages from (RWB > Component Monitoring>adapter monitoring-->adaptertype) to CCMS or picking up these logs with the alert framework.
    Manual monitoring is not an option because the number of systems to be monitored is to big, so an "monitoring robot" has to be created for this specific area. Most of the other area's are already covered by alert framework and CCMS.
    I hope someone has experience on this.
    Kind regards,
    Ramon Boekel

    Hi Ramon,
    Please have a look at this.
    /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
    cheers,
    Prashanth

  • Error while opening Adapter Monitoring in Runtime Workbench

    Hi,
    I am unable to open Adapter Monitoring from
    Runtime Workbench -> Component Monitoring -> Adapter Monitoring
    When I tried to open, I am getting following message in the new window:
    "The page cannot be displayed"
    Please let me know where I can enable this option.
    Thanks,
    Yogi.

    Hi,
    Go thru this SAP Note- 768456,928862
    Also this doc may help u-https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e1ba1a-e86e-2910-ee83-b73b54abc7d4
    Regards,
    Moorthy

  • Communication Channel Status Is Shwoing RedLed(Error)

    Hi,
        I used File Adapter in my  communication channels  that is FTP ... scenario is working fine.. but in the RWB- Communication Channel Monitoring the  Communication cHannel is showing RedLed(ERROR Status)
      The FTP server was running on UNIX.. that is Bourne Shell ... If the file is  there  in the source directory it was processing successfully.. even though the remaing all the time   it was throwing the following Error Mesage in the RWB-Communication Channel Monitoring..
    Could not process file 'SIMS-10.xml: No such file or directory': com.sap.exception.standard.SAPIllegalArgumentException: The parameter "argument" has the value "ftp://10.25.10.6:21./SIMS-10.xml: No such file or directory", so it contains the character "ftp://10.25.10.6:21./SIMS-10*.xml: No such file or directory" which is not allowed
    Please Suggest me.
    Regards
    Jain

    Hi ,
    We are polling a particular FTP site for files. If file is found communication channel is showing green led with no error message, but when file is not found it is showing red led with an error message in RWB .
    My concern :
    1. We applied the same approach in other scenarios also , but never came across this type of situation. In other cases if file is not found, communication channel is not showing red led and error message , so this is a metter of real concern to me.
    2. I believe that if communication channel is showing red led then definately alerts will get triggered for any error in adapter engine . correct me if wrong ...?
    the only difference i found is the shell on which FTP site is configured...We are getting error in bourne shell but no errors in Korn shell ,,,Our XI box is on HP-UX but FTP site is on Solaris 2.8
    Is it a bug In PI 7.0 ....?or Something is missing from FTP site ? or some configuration missing at configuration channel level.
    Regards

  • File Recever Communication Channel Error in PI 7.3

    Hi Experts,
    I have configured a scenario File to File. I am using the PI 7.3 version. In both channels module tab I have given the below details:
      Number    Module Name                                                                 Type                             Module key
            1        Localejbs/swift/FileActConversionToSWIFTModule      Local EnterpriseBean    0
            2        CallSapAdapter                                                              Local Enterprise Bean   1
    These parameters are available for the module FileActConversionToSWIFTModule
    Module Key      Parameter Name              Parameter Value
      0                       UseLocalSecurity             true           
      0                       KeyId                                SWIFT
    While monitoring the communication channel, I got below error in receiver communication channel.
    *Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'swiftMsgSig'*.
    Regards
    vishnu
    Edited by: vishnu sreenu on Oct 15, 2011 1:43 PM

    Hi Experts,
    I have configured a scenario File to File. I am using the PI 7.3 version. In both channels module tab I have given the below details:
    The interface i have configured between BCM-SwiftNet systems.
    Number Module Name Type Module key
    1 Localejbs/swift/FileActConversionToSWIFTModule Local EnterpriseBean 0
    2 CallSapAdapter Local Enterprise Bean 1
    These parameters are available for the module FileActConversionToSWIFTModule
    Module Key Parameter Name Parameter Value
    0 UseLocalSecurity true
    0 KeyId SWIFT
    While monitoring the communication channel, I got below error in receiver communication channel.
    *Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: java.lang.NullPointerException: while trying to invoke the method java.lang.String.length() of an object loaded from local variable 'swiftMsgSig'*.
    Regards
    vishnu

  • Adapter Monitoring

    Hi,
    My RFC senario is giving me an error,I went to component monitoring-->Adapter Monitoring and saw the list of adapters.I see that the RFC adapter is red,does it mean the adapter is down?how do I troubleshoot it?This is the error I have in RWB.
    Sender channel 'CC_RFC_*********' for party '', service 'SYSTEM_XI_010'
    Error can not instantiate RfcPool caused by:
    com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcServerPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: User is locked. Please notify the person responsible
    Thanks

    Hi,
    ->According to our error above you have problem with your gatway connection . can you make sure ur using correct gateway service. something like sapgw00 00 is system number. you get this in smgw.
    ->Check that the RFC Destination that you have created Do Connection Test & Remote LOgon also Re-Enter the User & Pwd Once again.
    Please take a look at the below error. It looks like same error what you have.
    RFC sender adapter error
    Plz do refer the following links:
    JCO_ERROR_RESOURCE
    /thread/2978 [original link is broken]
    Number of connections expiry problem - URGENT
    Please reward points if it helps
    Thanks
    Vikranth

Maybe you are looking for