Add 3D Content using script

Is there a way to script the addition of a 3D model to a pdf using the 3D tool "add 3D content".
I am trying to semi-automate the addition of 3D models as follows
User opens existing pdf form (template)
User starts a script using a button
Button code selects existing 3D model and brings up the Edit 3D content or add 3D content
User selects model.
I guess I don't see the API's for the 3D (model tool) in the reference, only the 3D annotations

Alastair,
Javascript intentionally has no File I/O. This is for security purposes. If you want to control the App externally, you can actually do this just fine using Windows Scripting Host and JScript or VBScript. I do this for automation testing all the time. You must create the "File Sytem Object" and "WScript.Shell" in JScript, and then can control Acrobat (or any other App) extensively using "SendKeys".
This is all probably a bit much, but I was trying to give you a workaround if you reeeeeally wanted to make this happen automatically!

Similar Messages

Add file contents using drag drop method

I want to add file contents to a text view by drag drop method. How i can do that in cocoa using objective c? Can anybody help me. I am using following code in my appCotroller file to do the same but can't get the desired out put. Insted of getting file contents, i m getting the file URL (Path) in the text view.

shaktirsg wrote:
As you said i have to open that file in my performDragOperation function, I want to know where to write this function. bcoz i have written this function in my appCotroller class but that code does'n get executed. Can you help me on this.
It is very hard to debug code I haven't seen. If you are getting the URL in your text view, you must be handling the drag operation correctly. Instead of putting the pasteboard data into the text view, get the file's contents and put that into the text view.
Also can you give me a sample code on how to open files in coccoa, how to read the contents of that file?
Look at NSString's "stringWithContentsOfFile:encoding:error:"

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Add event cases to an event structure using scripting

Hello,
Iam trying to (using scripting) update an event structure (add event cases) on a vi that is not on memory.
i get error 1054 The specified object was not found.
here is a picture of it.
any help in this will be greatly apreaciated.
Solved!
Go to Solution.

Another suggestion, the following VI is a wrapper for Traverse for GObjects VI and allows you to specify the name of the object you want. I always use this VI, I never use the Open VI Object Reference function, for the reasons tst mentioned:
vi.lib\Utility\traverseref.llb\TRef Find Object By Label.vi
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How to add composition to Media Encoder using Script?

On AE CS6 I used to add compositions to render queue using scripts. (jsx). Since Adobe depreciated some encoders scripts can not use those presents. I want to switch to Adobe Encoder and I want to add compositions to its queue using scripts.
Is there a way to tell adobe to add certain composition to Adobe Encoder queue using jsx script?
Is there any scripting guide for Adobe CC?

You will probably have to resort to calling the respective menu command and/ or write your own AME render list. I'm not aware of any specific support or commands for this otherwise, though presumably one might be able to intercept the stuff sent between the programs and build a little helper utility to mimic this functionality....
Mylenium

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles pannel because it's locked. I would also like to know how I shold tag my cove content. I dont' want rea

How should I tag content created in a master page when addressing accessibility before exporting to Acrobat? I can't add the content to the articles panel because it's locked. I would also like to know how I should tag my cove content. I don't want the reader to get lost in content other than the body of the report, but I also don't want to ignore some content completely by tagging it as artifacts. What should I do y'all?
Thanks,
Josh

Hi Rob,
From the screen shots it looks like your script is not formatted properly (you may refer to 'Paladin Script' in 'Sample Project' to get an idea of how the script should be formatted.).
Further please follow the steps mentioned below to use Story to PP workflow.
Create a new Film script in Adobe Story
Create scene heading – INT. LOCATION – Day (these will show up in the outline view panel on left hand side)
Hit enter, hit TAB
Enter the name of the speaker, hit TAB or ENTER
Copy over the transcribed text
Build your script this way
Number scenes from the production menu
Export ASTX file for your script : File->Export->.astx
Open Premiere Pro
Create a new project, bring in media
In the project pane, find the "Scene" column
For the clip that contains the spoken text, assign the same scene number to the clip as you have in the story script (lets say both are scene 1)
Click out of the scene box in the project panel in Ppro
Right click on the scene that you just assigned a scene number to and select – attach Story script
Select the .astx fle you exported in step 8
Click ok
You should now see the script data in the metadata panel for the clip in the metadata panel.
You can now run speech to text based on "Embedded Script metadata" to time align spoken word to the script.
Let us know if this is helpful.
Thanks
Rashi - Story Team

Powershell to add/delete content type to particular library alone in a site collection

Hi,
I am trying to add and delete content type from a particular picture library (site collection) using powershell.
I have tried the below, but it is not working.
Below scenarios are not working:
1) If the content type to be added is there in library, then the loop is still moving to "No content type exists".
2) Content type is not getting deleted from library
3) Set the newly added content type as default content type.
Below is the powershell, which I am trying:
function ChangeContentType($url)
$site = Get-SPSite($url);
$web =$site.RootWeb
$lookForList = "PicLibrary"
$lookForCT = "Img1ContentType"
$lookForRemoveCT = "Image2CT"
write-host "Checking site:"$web.Title
#Make sure content types are allowed on the list specified
$docLibrary = $web.Lists[$lookForList]
if ($docLibrary -ne $null)
$docLibrary.ContentTypesEnabled = $true
$docLibrary.Update()
if (($web.ContentTypes | where { $web.Name -eq $lookForCT }) -eq $null)
write-host "No content type exists with the name" $lookForCT "on list" $docLibrary.Title
#Add site content types to the list
write-host "Adding content type " $lookForCT "on list" $docLibrary.Title
$ctToAdd = $web.ContentTypes[$lookForCT]
$ct = $docLibrary.ContentTypes.Add($ctToAdd)
write-host "Content type" $ct.Name "added to list" $docLibrary.Title
$docLibrary.Update();
else
write-host "content type exists with the name" $lookForCT "on list" $docLibrary.Title
#Remove Content type
if (($web.ContentTypes | where { $web.Name -eq $lookForRemoveCT }) -eq $null)
write-host "No content type exists with the name" $lookForRemoveCT "on list" $docLibrary.Title
else
$ctToRemove = $web.ContentTypes[$lookForRemoveCT]
write-host "Removing content type" $ctToRemove.Name "from list" $docLibrary.Title
$docLibrary.ContentTypes.Delete($ctToRemove.Id)
$docLibrary.Update()
else
write-host "The list" $lookForList "does not exist in site" $web.Title
#Dispose object
$site.Dispose()
$web.Dispose()
How to fix this?
Thanks

Hi,
Thanks for the reply.
I checked it. If the script is run multiple times, the add and delete content type will throw error.
How to delete content type? I have tried the below:
$docLibrary = $web.Lists[$lookForList]
if ($docLibrary -ne $null)
$docLibrary.ContentTypesEnabled = $true
$docLibrary.Update()
#get the content Type
Write-host "Getting content type $lookForCT in site $web"
#Confirm that the content type exists.
$contentType = $web.ContentTypes | where {$web.ContentTypes.Name -eq $lookForCT}
##Abort if not found.
if ($contentType -eq $null)
Write-host "$lookForCT not found in site collection."
else
if ($web.ContentTypes.Name -eq $lookForCT)
Write-host $docLibrary.ContentTypes.Name
if($docLibrary.ContentTypes.Name -eq $lookForCT)
write-host "Content type $lookForCT is already added to list" $docLibrary.Title
else
write-host "No content type exists with the name" $lookForCT "on list" $docLibrary.Title
write-host "Adding Content Type"
$ctToAdd = $web.ContentTypes[$lookForCT]
$ct = $docLibrary.ContentTypes.Add($ctToAdd)
$docLibrary.Update()
write-host "Content type" $ct.Name "added to list" $docLibrary.Title
#get the content Type
Write-host "Getting content type $lookForRemoveCT in site $web"
#Confirm that the content type exists.
$contentType = $web.ContentTypes | where {$web.ContentTypes.Name -eq $lookForRemoveCT}
##Abort if not found.
if ($contentType -eq $null)
Write-host "$lookForRemoveCT not found in site collection."
else
if ($web.ContentTypes.Name -eq $lookForRemoveCT)
Write-host $docLibrary.ContentTypes.Name
if($docLibrary.ContentTypes.Name -eq $lookForRemoveCT)
write-host "Content type $lookForRemoveCT is added to list" $docLibrary.Title.
write-host "Removing Content type $lookForRemoveCT"
$ctToRemove = $web.ContentTypes[$lookForRemoveCT]
$docLibrary.ContentTypes.Delete($ctToRemove.Id)
$docLibrary.Update()
else
write-host "No content type exists with the name" $lookForRemoveCT "on list" $docLibrary.Title
I am getting error in delete now. Error is "Exception calling "Delete" with "1" argument(s): "Specified argument was out of the range of valid values.
Parameter name: id"
Thanks

I want to open "Paragraph Style Options" dialogue using Script(jsx)

Hi,
I have created a paragraph style using JSX.
var myDocument = app.activeDocument;
var myParagraphStyle = myDocument.paragraphStyles.item("myParagraphStyle");
Now I want to edit my paragraph style using the "Paragraph Style Options" window. How can I open the window for myParagraphStyle using JSX?
Is there any way to do it? I don't want to manually double click the name in the list to open it.

@kapoor_aman27 – with a little trick we could select a distinct paragraph style in the Paragraphs Style panel.
Add a new text frame to the document, add some contents, one character is sufficient. Format its contents with your paragraph style. Set the Paragraph Styles panel to visible. Select the text in the text frame with something like that: app.select(myTextFrame.texts[0]). Remove the text frame; the paragraph style stays selected in the panel.
The next step would be to invoke the "Paragraph Style Options" panel. The id for the appropriate scriptMenuAction is 8481.
try{
app.scriptMenuActions.itemByID(8481).invoke();
}catch(e){$.writeln(e.message)};
But unfortunately this would throw an error. Something like this:
(Error message in German:)
"Mit der angeforderten Aktion wurde ein asynchrones, modales Dialogfeld geöffnet,
für das eine Vorschau erstellt werden kann.
Dies ist nicht mit der Skriptarchitektur kompatibel, daher wurde das Dialogfeld
mit der Standardschaltfläche automatisch verworfen."
(Roughly translated to English:)
"An asynchronous, modal dialog box was opened by this action.
A preview can be created with that dialog box.
This is not compatible with the scripting architecture, therefore the dialog box
with the standard button was automatically rejected."
So I see no chance to do what you want.
(Tested with inDesign CS5.5 on Mac OSX 10.6.8)
Don't know, if that behavior has changed for more recent versions of inDesign…
Uwe

ConvertToButton using script

Hi Expert
I want to convert TextFrame or Image to Button using script But in object model I not found any method to convet it in button.
Object-->Interactive->convertToButton
http://forums.adobe.com/message/3788171
I also not found convertToObject() in object method.
b = app.selection[0];
b.convertToObject ();
How convert TextFrame to Button using script ?
Thanks.

Hi Bill
Have you tried this?
#target indesign
var myDocument = app.documents.add();
var myDocument = app.documents.item(0);
var myPage = myDocument.pages.item(0);
var myTextFrame = myPage.textFrames.add();
myTextFrame.geometricBounds = [72, 72, 288, 288];
myTextFrame.contents = "This is some example text."
//var myTextFrame = app.activeDocument.textFrames[0];
var myButton = convertToButton(myTextFrame);
function convertToButton(obj)
     app.selection = [obj];
     var maCreateButton = app.menuActions.item('$ID/$$$/Dialog/CmdName/CreateButton'),
          ret;
     if( !maCreateButton.isValid ) return false;
     maCreateButton.invoke();
     ret = app.selection[0];
     return ret;
Suresh

Using scripting with networking equipment under Windows

It can be a challenge to use scripting to automate working with Cisco devices. The Cisco IOS does not seem to directly provide a command line interface. You are forced to find a way to automate interaction with a telnet or ssh session.
The PERL language provides a number of object-oriented methods to help manage an interactive session, most notably Net::SSH::Expect and Net::Appliance::Session. These options can work well in a Unix environment, but not under MS Windows.
There are PERL for Windows options, the best probably being Strawberry PERL. There is also a Unix under Windows option known as CYGWIN that is freely available. Unfortunately none of these will work well with the way Windows manages low-level terminal I/O. The curious can google "windows pseudo terminal" to see all the technical details.
One way that does work under Windows is Tcl. It was initially named Tool Command Language. It is sometimes shown as Tcl/Tk.
Interestingly enough, Tcl is included within Cisco IOS as tclsh. There is no interaction with the tclsh and this example. It is just a bit of a curious coincidence.
A Tcl port to Windows can be downloaded from http://www.activestate.com/activetcl/downloads. Select Download ActiveTCL for Windows. A direct link to the download that worked at the time of writing is Download ActiveTcl 8.5.14 for Windows (x86)
Once base Tcl has been downloaded and installed there is one other component that will need to be installed from the Tcl Extension Archive, the expect package.
The teacup program that is installed with the base Tcl package makes this easy. The teacup program will work with a proxy.
You can set these Windows environment variables to specify proxy details:
set http_proxy=
set http_proxy_user=
set http_proxy_pass=
Then run teacup install expect
The plink tool from the PuTTY download is also needed. It can be obtained from http://www.putty.org/.
The sample that follows assumes that the data files, script and plink.exe executable all reside in the same directory.
A sample Tcl script follows that reads a file of devices and a file of commands. It will run the list of commands against each device in the device file. It has some basic error checking, but should best be considered a ‘beta’ version. You could do more complex interactions in the Tcl script by adding exp_send and expect command statements. In short, if you can type it you could script it!
Change directory to where your script, plink.exe and data is stored and run with tclsh <script_name>
devices.list
# Comment lines are allowed if they start with a hash mark
# <IP_Addr> <userid> <password> <ssh|telnet> <timeout_in_secs>
nnn.nnn.nnn.nnn    <userid>    <password> ssh         <timeout_in_secs>
nnn.nnn.nnn.nnn    <userid>    <password> telnet      30
commands.list
# term length 0 needed or else IOS will wait for an enter to be pressed at the --More-- prompts
term length 0
show run
exit
Script:
# Run batch commands against one or more devices
package require Expect
exp_log_user 0
set exp_internal 0
set exp::nt_debug 0
set prompt "(#\s*$|>\s*$)"
set env(TERM) dumb
set file_channel [open "devices.list" r]
set DEVICES      [read $file_channel]
close $file_channel
set file_channel [open "commands.list" r]
set COMMANDS      [read $file_channel]
close $file_channel
set command_entries [split $COMMANDS "\n"]
set device_entries [split $DEVICES "\n"]
proc timedout {{msg {none}}} {
      send_user "Timed out (reason: $msg)\n"
      if {[info exists ::expect_out]} { parray ::expect_out }
      exit 1
foreach device_entry $device_entries {
      if {[string length $device_entry] == 0 || [regexp {[ \t]*#} $device_entry]} { continue }
      set device [lindex $device_entry 0]
      set user    [lindex $device_entry 1]
      set pass    [lindex $device_entry 2]
      set mode    [lindex $device_entry 3]
      set wait    [lindex $device_entry 4]
      set serial [lindex $device_entry 5]
      # puts "Device=$device"
      # puts "User=$user"
      # puts "Mode=$mode"
      # puts "Wait=$wait"
      set timeout $wait
      # Spawning the Session
      # If you are logging on to the remote machine using "ssh", "slogin" or "rlogin", the information
      # gets processed in a slightly different manner. With any of these methods, it is necessary to
      # include an additional -l option to specify a username.
      # Next, the $spawn_id variable is captured, storing information about this spawn session in
      # memory for future reference.
      # If you are logging in via Telnet, the final code block in this section is required to pass the
      # username to Telnet. If the login is completed before the script times out, the exp_send command
      # passes the username.
      switch -exact $mode {
            "telnet" { set pid [spawn plink -telnet -l $user $device] }
            "ssh"   { set pid [spawn plink -ssh -l $user -pw $pass $device] }
            "serial" { set pid [spawn plink -serial $serial -l $user -pw $pass $device] }
      set id $spawn_id
      if {$mode == "telnet"} {
            expect -i $id timeout {
            timedout "in user login"
            } eof {
            timedout "spawn failed with eof on login"
            } -re "(login|Username):.*" {
            exp_send -i $id -- "$user\r"
      # Handling Errors
      # The error-handling section of the script is a while loop that anticipates a number of problems
      # that could occur during login. This section is not exhaustive. For example, you could also add
      # provisions for invalid usernames and passwords.
      # If the login is not completed during the allotted time frame, which is set from the devices.list file
      # and specified with expect -i $id timeout, the program displays an appropriate error message.
      # The remainder of this loop makes use of the exp_send command to allow for other scenarios, such
      # as the user typing "yes" when prompted to proceed with the connection, entering a password, or
      # resetting the terminal mode.
      set logged_in 0
      while {!$logged_in} {
            expect -i $id timeout {
            timedout "in while loop"
            break
            } eof {
            timedout "spawn failed with eof"
            break
            } "Store key in cache? (y/n)" {
            exp_send -i $id -- "y\r"
            } -re "\[Pp\]assword:.*" {
            exp_send -i $id -- "$pass\r"
            } "TERM = (*) " {
            exp_send -i $id -- "$env(TERM)\r"
            } -re $prompt {
            set logged_in 1
      foreach command $command_entries {
            if {[string length $command] == 0 || [regexp {[ \t]*#} $command]} { continue }
            # Sending the Request
            # If the login is successful, the code in the if statement below is used to send the "cmd" request
            # to display files and directories. After the request is sent with exp_send, the resulting output
            # is captured in the dir variable, which is set on the fourth line of the code shown below.
            if {$logged_in} {
                  exp_send -i $id -- "$command\r"
                  expect -i $id timeout {timedout "on prompt"} -re $prompt
                  puts "$expect_out(buffer)"
            # Closing the Spawned Session
            # The exp_close command ends the session spawned earlier. Just to be sure that session
            # does indeed close, the exp_wait command causes the script to continue running until a result is
            # obtained from the system processes. If the system hangs, it is likely because exp_close was not
            # able to close the spawned process, and you may need to kill it manually.
      catch { exp_close -i $id }
      exp_wait -i $id
      set logged_in 0
*** End of Document ***

Your friend will have to save the templates as CS6, which he can do.

How can I add new content in iDVD to a DVD-RW disc which has ample remaining free space? After preparing the new video for burning and clicking on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject.

How can I add new content in iDVD to a DVD-RW disc with a video previously successfully recorded on it? (The disc has ample remaining free space.)
After preparing the new video for burning and clicking in the File menu on Burn to iDVD, I get a window saying the disc's already recorded and that I can either Erase or Eject. My assumption has been that iDVD would automatically find the free space and continue with the new recording from there. I'd be grateful if anyone can shine light on this.

There are, but not with a DVD written as a movie disk. It must be closed when completed, or it doesn't work.
Apple's built in Burn utility also automatically closes any data CD, DVD or Blu-ray disk you burn. Doesn't matter how much space is unused, you can't use it. You'd have to use a more advanced disk creation app, such as Toast Titanium. I then have the option of choosing to write the data as a session:
I can keep doing this until the disk is full. If I've written five sessions to the disk, when I put it in the drive, five CD/DVD icons will appear on the desktop since the OS will treat each session as if they are separate physical disks. At any point you choose Write Disk when writing a group of data, that means you're closing the disk, and again can't add anything after that. So if I had written two sessions, and the third was Write Disk, it's over. I can't put anything else on that disk.

Is it possible to add a property using variable in variable name?

I want to query for a list of virtual machines within a folder, then create a menu of the host names using forms. Since the list of machines is subject to change, I want to build the list each time the script is run, rather than build off a static
list.
For each virtual machine I need to create the list of variables below:
$hostnameX = New-Object System.Windows.Forms.checkbox
$hostnameX.Location = New-Object System.Drawing.Size(10,20)
$hostnameX.Size = New-Object System.Drawing.Size(100,20)
$hostnameX.Checked = $true
$hostnameX.Text = "Type"
$hostnameX.Controls.Add($hostnameX)
The location and size values need to be incremented but I think I can figure that part out.
I can use New-Variable to generate the initial variable. But I receive errors using the same method to try to create a new property for the variable.
$VMS = Get-Cluster MyCLUS | Get-vApp "My vApp" | Get-VM | Select Name,PowerState | Sort Name
For ($i=0; $i -lt ($VMS.count); $i++)
$VMS[$i].Name
$VMGUEST = "$($VMS[$i].Name)" -replace("-","")
New-Variable "CB$VMGUEST" "New-Object System.Windows.Forms.checkbox"
New-Variable "CB$VMGUEST.Location" "New-Object System.Drawing.Size(10,20)"
In the above, $CBVMGUEST1 = New-Object System.Windows.Forms.checkbox which is what I want, but $CBVMGUEST1.Location is not set.
Is there way to add a property using a variable in the variable name? Or any other suggestions on how to tackle this issue?

Hi,
maybe another approach is a bit easier.
Use a hash-array like
$CB = @{}
$CB[$VMGUEST] = New-Object System.Windows.Forms....
$CB[$VMGUEST].Location = New-Object System.Drawing....
Mit freundlichen Grüßen Jens Kalski
That's the correct answer. Anytime you find yourself wanting to create variables named "Widget1", "Widget2", "Widget3", etc... it's a pretty clear indication that what you really need is a collection object of some sort. That might be an array,
a hashtable, or any other data structure for holding other objects, depending on your specific needs.

Create a counter for the rows in a table using script editor?

Hi ,
I want to add afield in a particular table with first field is its serial number . How to use scripting editor to fill the serial number ?
How to create a counter ?
Edited by: Rajan.Dexter9 on Jan 30, 2012 9:40 PM

Hello Rajan,
Create a field in the table and name it as 'SERIAL'. Create a variable called 'count' with default value as 0. Now in script editor, for javascript language and calculate event, write the following script.
var fields = xfa.layout.pageContent(xfa.layout.page(this)-1, "field", 0);
for (var i=0; i <= fields.length-1; i++)
     if (fields.item(i).name == "SERIAL")
          count.value = count.value + 1;
                 this.rawValue = count.value;

How to get the handle of all text fields in the subforms, using script

Hi Friends,
I have around 20 fields in a subform, how can i get the names of all the fields using script.
I wish to enhance the following script where the field names are hard coded
thereby the script itself will get the names of the field names.
var f1 = this.parent.somExpression + ".TextField2" + ",";
var f2 = f1 + this.parent.somExpression + ".DropDownList1" + ",";
var f3 = f2 + this.parent.somExpression + ".NumericField1";
xfa.host.resetData(f3);
Any help will be greatly appreciated..
Thanks
JJ

Hi Paul,
Thanks for your comments.
I achieved the clear contents by resetting, by taking input from your thoughts..
form1.sub1.sub2.sub3.table_1.addDelete_Top.addDelete.deleteRow::click - (JavaScript, client)
//Here is my code finally look like..
//row 1, table_1 are also subforms
for (var i=1;i<10;i++){
var myRow = this.resolveNode("table_1.row1[" + i + "]");
if(myRow.presence == "hidden"){
i = i-1;
var myRowDelete = this.resolveNode("table_1.row1[" + i + "]");
if(i!=0){
xfa.host.resetData(myRowDelete.somExpression);
myRowDelete.presence = "hidden";
break;
if(i==9){
xfa.host.resetData(myRow.somExpression);
myRow.presence = "hidden";
break;
Thanks
JJ

Add a for each script to loop through HTTPService?

I'm using Flash Builder 4 with the Flex 4.1 SDK. I want to add a "for each" script to loop through my HTTPService XML file so only each nepName displays only once in my dropdown list. In my XML file I have multiple records associated with nepName. I would like ALL the records associated with each nepName to populate in my datagrid when it is selected from the dropdown. Currently in my dropdown there is a nepName entry for each XML tag. I hope I was able to explain that well enough. I'll try to put my code below so you can see everything I'm working with.
MXML:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:esri="http://www.esri.com/2008/ags"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600"
               creationComplete="nepInfo.send()">
    <s:layout>
        <s:VerticalLayout horizontalAlign="center" paddingTop="25"/>
    </s:layout>
    <fx:Declarations>
        <s:HTTPService id="nepInfo" url="http://www.epa.gov/owow/estuaries/nep_info.xml"/>
        
    </fx:Declarations>
    <s:Panel title="NEP Project Information">
        <s:layout>
            <s:VerticalLayout/>
        </s:layout>
        <s:HGroup verticalAlign="middle">
    <mx:Form x="188" y="34" width="338">
    <mx:FormItem label="Search for NEP Information:">
    <s:DropDownList enabled="true" id="dropDownList" prompt="Select NEP" dataProvider="{nepInfo.lastResult.records.record}" labelField="nepName">
    </s:DropDownList>
    </mx:FormItem>
    </mx:Form>
        </s:HGroup>
        <mx:DataGrid id="resultsGrid"
                     dataProvider="{dropDownList.selectedItem}"
                     visible="{dropDownList.selectedItem != null}" x="20" y="62" width="1166" height="620">
            <mx:columns>
                <mx:DataGridColumn dataField="projectName" headerText="Project Name" wordWrap="true"/>
                <mx:DataGridColumn dataField="projectDescription" headerText="Project Description" wordWrap="true"/>
                <mx:DataGridColumn dataField="acres" headerText="Acres" wordWrap="true"/>
                <mx:DataGridColumn dataField="habitatDescription" headerText="Habitat Description" wordWrap="true"/>
                <mx:DataGridColumn dataField="neportCategory" headerText="Habitat Category" wordWrap="true"/>
                <mx:DataGridColumn dataField="restorationType" headerText="Restoration Type" wordWrap="true"/>
                <mx:DataGridColumn dataField="leadPartner" headerText="Lead Partner" wordWrap="true"/>
            </mx:columns>
        </mx:DataGrid>
    </s:Panel>
</s:Application>
XML: http://www.epa.gov/owow/estuaries/nep_info.xml
Thank you in advance for your help!
-Alison

($file, pwd);Assuming "pwd" is meant as the current directory, here a small example :
TEST@db102 SQL> create or replace procedure test_proc (p1 varchar2, p2 varchar2)
2 is
3 begin
4     dbms_output.put_line (p1||' '||p2);
5 end;
TEST@db102 SQL> /
Procedure created.
TEST@db102 SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
$ ls -l /tmp/test/*.sql
-rw-r--r-- 1 ora102 dba 69 Apr 18 23:23 /tmp/test/file1.sql
-rw-r--r-- 1 ora102 dba 112 Apr 18 23:23 /tmp/test/file2.sql
-rw-r--r-- 1 ora102 dba 120 Apr 18 23:23 /tmp/test/file3.sql
$ cat test_proc.sh
DIR=/tmp/test
cd $DIR
ls *.sql | while read file
do
        echo "Processing file $file"
        sqlplus -s test/test << EOF
set feed off
set pages 0
set serveroutput on
exec test_proc('$file', '`pwd`');
exit
EOF
done
$ ./test_proc.sh
Processing file file1.sql
file1.sql /tmp/test
Processing file file2.sql
file2.sql /tmp/test
Processing file file3.sql
file3.sql /tmp/test
$

Add 3D Content using script

Similar Messages

Maybe you are looking for