Add a custom screen to XK02

Hi all ,
We have a requirement to add a sub screen with some customised fields in the standard transaction XK02(VENDOR MASTER).It has many subscreens, we have to add a new subscreen to the transaction, I have got a BADI VENDOR_ADD_DATA_CS where we can add our custom screens and cal through the transaction.But while running the transaction its not going to this BADI.Any pointers to this will be appreciated.
Thanks and Regards
Kiran

Hi,
I can see the filters(screen groups) while implementing BADI VENDOR_ADD_DATA_CS.What is the significance of screen group and what screen group needs to be given in the imlementation.
Thanks and regards
Kiran

Similar Messages

Custom screen field in the SRM portal screen for Business Partner Bidder

I need to add a custom screen field in the SRM portal screen for Business Partner. I have added this custom field in the include structure: CI_EEW_BUT000 and activated it.
I was expecting to see the enhanced field available in the SRM portal screen when I create the bidder. But is not available.
The new field are available if I edit an Business partner only.

Hi,
Please look into the following OSS Notes:
Note 675800 - Business partner enhancement SRM on maintenance screen
Note 672960 - User-defined fields 2
Thanks,
Pradeep

Custom screen lisbox and button

Hello Friends. How to add a custom screen field lisbox and a button to an existing sales order header view. The listbox is a screen field (not a CUSTOMERH field). What are the steps besides copying the view .Please suggest.

I do not know the answer about existing JSF components, but here is something that might work for you
Drop a Grid Panel component where you want the text field and button.
Set the columns property to 2.
Drop a Text Field Component in the Grid Panel. Then Drop a Button component. If they don't drop in the right order, use the Outline window to rearrange.
Try setting the width (setColumns) of the Text Field component in the prerender method. The button should nicely sit to the right, and you should not have overlap.
Hope this helps,
Chris

CV130 - Custom screen / tab

I need to add a custom screen or tab for DMS. I have screen 9000 in CV130 by copying screen 1204. I have added screen fields PRPS-POSID on the custom screen . I am not able to access the value of POSID when i enter a new value in the screen . In normal module program you have to code for the same but in this the other tabs it is working fine with same code as in 1204 but not for the custom screen. Do we need to do anything for this ?

Hi Neil
The sales order program (SAPMV45A) has the "old" screen-exit where you can implement an own your screen.
There are 2 screen:
- One for header: 8309
- One for item: 8459
If you active these screen (subscreen) a the tab "Addiional Data B" will be available
You need to get the access key in order to change them
Max

How to create custom screen in 'MIGO'

Hi,
In transaction Code 'MIGO' I want to add a custom screen at header level / item level. I think there is no screen exit. How do I do this?
Thanks.

Simply i just searched with your subject line i got these thread:
Adding custom fields in the MIGO screen
Add custom field in MIGO (SAP 4.6C)

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
     <head>
     <script language="JavaScript">
          setTimeout(closeMe, 3000);
          function closeMe() {
               alert("This window will close");
               top.close();
     </script>
     </head>
     <body><B>This window will close in three seconds</B></body>
</html>
{code}

How to add a Custom field in the Standard SAP Sales Order main screen

Dear Experts,
We have a requirement of adding a Custom field in the Sales Order screen. I know how to add the Customer field in the Additional data B tab of the Sales Order Header Screen as that is the screen user exit provided by SAP. Can someone tell me how to add the Custom field in the Sales Order main screen. Program Name - SAPMV45A and Screen Number - 4001. What is all I need to take care.
Thanks,
SNK.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

How to add a custom field to Ship-to address screen

Hi all,
I have to add a custom field for Plant in the Ship-To address subscreen(BBPSC01).
I have added the field in the program saplbbp_sc_ui_its in screen 310.
But I think need to write the HTML code/Java script in HTML template to trigger the code from module pool.
As I am new to HTML/Java script, Can any one please let me know the procedure to follow.
Thanks,
Rakesh.

I have not added the Custom filed in the main screen and added in the Additional data B screen. So closing the message.

Add two customer tab in ME53N screen

Hi Experts,
We have added one customer tab in the (ME53N) Requisition screen using screen exit SAPLMEGUI (SUB0).
Is it possible to add another customer tab to that screen?
Regards,
Anirban

Hi Anirban,
We can achieve the target of adding a customer tab using the exit MEREQ001.
Go to Tcode SMOD , Enter the Enhancement as MEREQ001 , Click on 'Documentation' and SAP has given an excellent step by step procedure on how to add a tab at item level.
Hope it helps
Regards
Byju

Add a custom tab to include custom fields in Shipment Screen (VT03N)

Hello every one,
We have a requirement to add a custom tab to include custom fields in shipment header.
Can any one of you help me on this?
Thanks in advance !!!
Regards,
Ganga

Hi Ganga,
This is the question of customer exit....you will get very good links on the forum itself...but i can give you some hint:
1. fing out the package or program name for the transaction(by gng in the setting)
2. go to se84 and in the enhancement->customer exit tab...with the help of pkg name got above find out the various enhacement for this tcode.
3.find out the appropriate one by putting in the break point.
4. You can get an exit with a screen exit where you will create your own screen(with the custom field if.....then you have to append them in the table) or with the std fields.
5. there you will get the fm exit for PBO and PAI as well.
Hope this might help you in solving the problem.
Pooja

Implemented BADI to add custom screen to VD02 - how to get data to fields?

hi..
i have implemented CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS to add a new screen to Customer Master maintenance tcodes.
When I run VD02 (for example), I get my button and when I click it, my new screen with new fields show up.
I need to be able to select from a custom table based on the current KUNNR and populate those fields with data for the user.
I created the custom screen using a Module Pool program - so this does give me PBO/PAI but I don't have access at that point to my S_KNA1 & other structure info that is contained in the BADI which I need.
How do I pass data to those fields?
thanks in advance.
rp.

At the point you are clicking 'your' button you could export the structures containing the needed data to abap memory. once in your new screen pbo you may import from abap memory.
do make sure that your development is hit only for the document type and other usage parameters by putting enough filters before the screen call- else this can slow down quite a few things in SD.

Add ECC Custom Fields in CRM Web UI ERP Order item

hi all,
i have to Add ECC Custom Fields in CRM Web UI ERP Order item .
I have :
- add the field on Web UI Screen.
- add the field on structure TDS_item_COMV and TDS_item_COMC in ecc
- insert record for field on LORD_MAPPING table
- implemented badi BADI_LORD_DO_PA BADI_LORD_GET_INPUT_MODE.
- implemented method GET_I_S_STRUCT on crm with :
CASE COMPONENT.
    WHEN 'ZZSPOND'.
      RV_DISABLED = ABAP_False.
endcase.
- on method do_prepare_output i have change value of fields with code :
lr_loop = typed_context->erpadmini->collection_wrapper->get_first( ).
WHILE lr_loop IS BOUND.
posnr = lr_loop->get_property_as_string( iv_attr_name = 'POSNR' ).
Does the current item has to be set for "Sponda Idraulica"?
READ TABLE Z5CL_GSA_TOOL0001=>GT_ITEMS_SPOND INTO ls_spond
                              WITH KEY posnr = posnr.
IF sy-subrc = 0.
lr_loop->set_property_as_string( iv_attr_name = 'ZZSPOND' iv_value = 'X' ).
DATA : V_X TYPE STRING.
V_X = lr_loop->get_property_as_string( iv_attr_name = 'ZZSPOND' ).
ENDIF.
lr_loop = typed_context->erpadmini->collection_wrapper->get_next( ).
ENDWHILE.
I can't change the field value because it is "not changeble" .
Can you help me ?
Thanks in advance.

Hi Celi,
I have created some fields at header level of ERP Order, and the user is available to change them, replicating the information to SAP ECC (using interface LORD II).
All sales item information is treated using RFC ERP_LORD_GET_ITEM_MULTI, available in SAP ECC.
Please check the following point:
If those structures below were expanded with your custom fields:
SAP CRM:
CRMST_L2_ITEM_COMV
CRMST_L2_ITEM_COMC
CRMTT_ADMINI_ERPIL
CRMTT_ADMINI_I_ERPIL
SAP ECC:
TDS_RFC_ITEM_COMV
TDS_RFC_ITEM_COMC
Please check if for your scenario is necessary to implement the enhancement BADI_LORD_DO_PAI method ADD_SUPPLY_LIST. The code below works for header level.
DATA: ls_supply TYPE tds_field_supply.
IF iv_object_id EQ 'HEAD'.
    IF iv_module EQ 'VBAK_BEARBEITEN'.
      ls_supply-field = 'ZZCCINS'.
      APPEND ls_supply TO ct_supply.
      ls_supply-field = 'ZZCCNUM'.
      APPEND ls_supply TO ct_supply.
      ls_supply-field = 'ZZCCNAME'.
      APPEND ls_supply TO ct_supply.
      ls_supply-field = 'ZZAUNUM'.
      APPEND ls_supply TO ct_supply.
    ENDIF.
ENDIF.
I hope it helps!
Kind Regards!

Data not Updated in Custom Screen fields-Vendor Master

Hello,
I have created a custom screen in vendor master transaction and also implemented the two BADI's below.
Business Add-In: Processing Master Data Enhancements
(CUSTOMER_ADD_DATA/VENDOR_ADD_DATA)
Passed the Custom Program and Screen No in the method GET_TAXI_SCREEN
Business Add-In: Customer Subscreens
(CUSTOMER_ADD_DATA_CS/VENDOR_ADD_DATA_CS)
activate it with the BADI Processing Master Data Enhancements with method CHECK_ADD_ON_ACTIVE.
I also created a new screen and used few fields from LFA1 (Append structure fields) such that the fields on the screen are : LFA1-ZZFIELD1 etc...
Now the issue is the screen is displayed, but the data entered on the screen is not updated on the table LFA1 or data from the table is not displayed on the custom screen.
Am i missing something?
Regards,
Shiva

Solved this problem.
I built the query against InfoCube and not the characteristic itself. That's why I can't see the update.
Thanks.

Added custom screen in PO using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST

Hi All,
I have added custom screen with two z fields at item level using BADI ME_GUI_PO_CUST and ME_PROCESS_PO_CUST i can see my screen in tcodes ME21N , ME22N , ME23N but I am not able to save data.
and also screen is coming in change mode even in ME23N .
thanks.

Hi,
I have added two xfields at item level.
This is the code i have added in zimplementation ZME_GUI_PO_CUST .
IN Zimplementation ME_PROCESS_PO_CUST I have added code only in method FIELDSELECTION_ITEM . after doing this I can see only screens in ME21N, ME22N, ME23N but when enter data in zfields and trying to save it is giving me message no data has changed.
method IF_EX_ME_GUI_PO_CUST~SUBSCRIBE.
DATA: ls_subscriber LIKE LINE OF re_subscribers.
we want to add a customer subscreen on the item detail tab
CHECK im_application = 'PO'.
CHECK im_element     = 'ITEM'.
each line in re_subscribers generates a subscreen. We add one subscreen in this example
CLEAR re_subscribers[].
the name is a unique identifier for the subscreen and defined in this class definition
ls_subscriber-name = subscreen1.
the dynpro number to use
ls_subscriber-dynpro = '0001'.
the program where the dynpro can be found
ls_subscriber-program = 'SAPLYMEPOBADIEX'.
each subscreen needs his own DDIC-Structure
ls_subscriber-struct_name = 'MEPO_BADI_STRUCT'.
a label can be defined
ls_subscriber-label = text-001.
the position within the tabstrib can be defined
ls_subscriber-position = 4.
the height of the screen can be defined here. Currently we suport two screen sizes:
value <= 7 a sevel line subscreen
value > 7 a 16 line subscreen
ls_subscriber-height = 7.
APPEND ls_subscriber TO re_subscribers.
ENDIF.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_MODEL.
DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
        ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl.
system asks to transport data from the business logic into the view
CASE im_name.
    WHEN subscreen1.
is it an item? im_model can be header or item.
      mmpur_dynamic_cast l_item im_model.
      CHECK NOT l_item IS INITIAL.
transport standard fields
      ls_mepoitem = l_item->get_data( ).
transport customer fields
      CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
        EXPORTING
          im_ebeln = ls_mepoitem-ebeln
          im_ebelp = ls_mepoitem-ebelp
        IMPORTING
          ex_data = ls_customer.
store info for later use
      MOVE-CORRESPONDING ls_mepoitem TO dynp_data_pbo.
      MOVE ls_customer-badi_bsgru TO dynp_data_pbo-badi_bsgru.
      MOVE ls_customer-badi_afnam TO dynp_data_pbo-badi_afnam.
    WHEN OTHERS.
ENDCASE.
endif.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_DYNP.
CASE im_name.
    WHEN subscreen1.
      CALL FUNCTION 'YMEPOBADIEX_PUSH'
        EXPORTING
          im_dynp_data = dynp_data_pbo.
    WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_FROM_DYNP.
CASE im_name.
    WHEN subscreen1.
      CALL FUNCTION 'YMEPOBADIEX_POP'
        IMPORTING
          ex_dynp_data = dynp_data_pai.
      IF dynp_data_pai NE dynp_data_pbo.
something has changed therefor we have to notify the framework
to transport data to the model
        re_changed = mmpur_yes.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDIF.
endmethod.
method IF_EX_ME_GUI_PO_CUST~TRANSPORT_TO_MODEL.
DATA: l_item       TYPE REF TO if_purchase_order_item_mm,
        ls_mepoitem TYPE mepoitem,
        ls_customer TYPE mepo_badi_exampl.
data have to be transported to business logic
CASE im_name.
    WHEN subscreen1.
is it an item? im_model can be header or item.
      mmpur_dynamic_cast l_item im_model.
      CHECK NOT l_item IS INITIAL.
      ls_mepoitem = l_item->get_data( ).
standard fields changed?
     IF dynp_data_pbo-matkl NE dynp_data_pai-matkl OR
        dynp_data_pbo-plifz NE dynp_data_pai-plifz OR
        dynp_data_pbo-webaz NE dynp_data_pai-webaz.
update standard fields
       ls_mepoitem-matkl = dynp_data_pai-matkl.
       ls_mepoitem-plifz = dynp_data_pai-plifz.
       ls_mepoitem-webaz = dynp_data_pai-webaz.
        CALL METHOD l_item->set_data( ls_mepoitem ).
     ENDIF.
        CALL FUNCTION 'YMEPOBADIEX_GET_DATA'
          EXPORTING
            im_ebeln = ls_mepoitem-ebeln
            im_ebelp = ls_mepoitem-ebelp
          IMPORTING
            ex_data = ls_customer.
        ls_customer-badi_bsgru = dynp_data_pai-badi_bsgru.
        ls_customer-badi_afnam = dynp_data_pai-badi_afnam.
        CALL FUNCTION 'YMEPOBADIEX_SET_DATA'
          EXPORTING
            im_data = ls_customer.
     ENDIF.
    WHEN OTHERS.
ENDCASE.
ENDIF.
method IF_EX_ME_PROCESS_PO_CUST~FIELDSELECTION_ITEM.
DATA: l_persistent TYPE mmpur_bool.
CONSTANTS:
FIELD-SYMBOLS: <fs> LIKE LINE OF ch_fieldselection.
l_persistent = im_item->is_persistent( ).
*IF l_persistent EQ mmpur_yes.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                     metafield = MMMFD_YYMAN_NUM."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
READ TABLE ch_fieldselection ASSIGNING <fs> WITH TABLE KEY
                     metafield = MMMFD_YYMAN_DES."fd_cust_01.
IF sy-subrc IS INITIAL.
<fs>-fieldstatus = '*'. " Display <-- this one was as per the sample code given.
<fs>-fieldstatus = '+'. " Input <-- this i added to make the field mandatory.
ENDIF.
*ENDIF.
ENDIF.
endmethod.

How to add a custom button on Application Toolbar for ME21N, ME22N & ME23N

Hi Experts,
I am new to this forum. I hope someone will help me.
My Requirement is as :
I want to add a new custom button on Application Toolbar for ME21N, ME22N & ME23N.
There are already standard buttons in this toolbar which is Document Overview On, Hold, Personal Settings etc.
So after the 'personal settings' button i want add a new button and want to write a code which will open one custom screen.
I am not able to find any exit for this....
Please help...
Thanks....

Hey Buddies
Try below BADI : ME_PROCESS_PO_CUST
and check with required methods.
1)PROCESS_ITEM
2)CHECK
3)POST
Regards,
Pranav

Add a custom screen to XK02

Similar Messages

Maybe you are looking for