Add fields to LRF1 display!

Hi all,
I need to add a field AUART to the ALV grid display in transaction LRF1 and remove fields Plan Time WM and Time Unit.
To do this, do I need to copy the entire funtion group LRFMON and modify the code or is there any simpler way of doing this?
Thanks in advance...
Regards,
Srinath

Hi Srinath
you must change this constant (in include LZLRFMONTOP) repid from 'SAPLLRFMON' to your Z-main program:
like this:
repid type sy-repid value 'SAPLZLRFMON',
Regards
Larissa

Similar Messages

Add fields in delivery report (ROIGSD01) in TD.

Dear Expert,
Anyone knows how can i add fields in the report ROIGSD01? the one which I use to get the deliverys in TD
I already added the fields in the ROIGSD01_ITEM_ALV structure, but I could not find the user-exit to fill this fields.
anyone made it before?.
I would realy appreciate you help.
Best regards.

Hi
Madhu is right. Please, see the coding in include V50R_USEREXITS
* 1. Add field to list-display
* Userexits for additional fields on list display
* use append-structure in DDIC at structure SHP_VL10_ITEM
* and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
Do double click and see the coding. If you are in ECC 6.0, do an implicit. If not, go to SCCR.
I hope this helps you
Regards
Eduardo

Add fields in VL10 report - EHN

Hi ,
I am supposed to add two fields from Table KNVV-KVGR1/KVGR2 table in to alv report output of VL10/VL10A.
I have tried for BADI but none got trigged. Is.Is the any Badi/Exits available or do I need to go for explict/implicit enhancement.
Kindly help urgent requirement.
Thanks in advance.
Thanks,
D.Dutta.

Hi
Madhu is right. Please, see the coding in include V50R_USEREXITS
* 1. Add field to list-display
* Userexits for additional fields on list display
* use append-structure in DDIC at structure SHP_VL10_ITEM
* and ad field value in one of these routines
*INCLUDE LV50R_VIEWG02.       "POS_ITEM_FILL_USER:       SD/MM-orders
*INCLUDE LV50R_VIEWG03.       "POSTAB_VEPVG_FILL_USER    SD-Index
*INCLUDE LV50R_VIEWG06.       "POSTAB_VETVG_FILL_USER    MM-Index
*INCLUDE LV50R_VIEWG07.       "POSTAB_DELIVERY_FILL_USER Delivery item
Do double click and see the coding. If you are in ECC 6.0, do an implicit. If not, go to SCCR.
I hope this helps you
Regards
Eduardo

Add field and Display future dated data in OrgChart

Configuration
SAP Talent Visualization by Nakisa 2.1 under LIVE connection.
Questions
1) Add fields to Details(for Position/OrgUnit/Employee) window in OrgChart
 We have a few requirements to display additional data in Details window.
 Do we need any developments to add the following items to Details window ?
Position's General Description data (stored in IT1002)
OrgUnit General Description data (stored in IT1002)
Name, Phone No., Gender(and other personal information coming from various infotype) of employees, who belong to position
2) Display future dated Organizational Structure in OrgChart
 We also have requirement to display future dated OrganizationalStructure.
 The future dated Organizational Structure should ONLY availablefor people from HR and executives.
 How can we do this?
3) Security Setting
 Regarding to the question above, how can we create the security roles (in Nakisa) for therequiremets listed below?
The security setting in SAP allows managers only can see employee's data, who belongs to the managers organization.
The security setting in Nakisa OrgChart allows every employee can see all organizations and other related objects.

Hi Ogawa, 
Please see my responses in bold. 
I hope that helps! 
Luke 
1) Add fields to Details(for Position/OrgUnit/Employee) window in OrgChart 
We have a few requirements to display additional data in Details window. 
Do we need any developments to add the following items to Details window ? 
- Position's General Description data (stored in IT1002) 
- OrgUnit General Description data (stored in IT1002) 
- Name, Phone No., Gender(and other personal information coming from various infotype) of employees, who belong to position 
 
You need to configure the integration schema to "extract" these fields in order for them to be available to OrgChart. I believe the file is called downloadSchema.xml and is found in your build folder. It is not the one in the SAPExtractor folder (that is for Staged). 
2) Display future dated Organizational Structure in OrgChart 
We also have requirement to display future dated OrganizationalStructure. 
The future dated Organizational Structure should ONLY availablefor people from HR and executives. 
How can we do this? 
 
This is not possible as OrgChart only displays one version of the OrgChart (the present dated structure).
 
3) Security Setting 
Regarding to the question above, how can we create the security roles (in Nakisa) for therequiremets listed below? 
- The security setting in SAP allows managers only can see employee's data, who belongs to the managers organization. 
- The security setting in Nakisa OrgChart allows every employee can see all organizations and other related objects.
 
Your bottom requirement is standard - unless you secure an item then every employee will be able to see all data.
 
In order to configure manager security you will need to undertake some XML configuration. This is not advisable unless you have experience of configuring the XML files, particularly with security as it is highly complex configuration. There are a couple of consultancies with specialist skills (Emeritis, ROC, Nakisa) that have the expertise to perform this type of configuration.
 
In order to do this you need to configure an authentication source and populate the user population and rolemapping sections of the LoginConfiguration_<type>.xml in the Authentication folder of your build. <type> refers to the type of authentication you are using (SAP logon forms, Portal integration with Logon Tickets etc). You will then need to map the roles in RoleMapping.xml in the Security folder of your build and then configure each role in Roles.xml. You need to create a hierarchyscope for each dataelement you are restricting data for and then add the security keyword to the sections in AppResources.xml that you are restricting with this particular scope.

Custom fields not displayed inside 'Add. fields' tab of KS01/KS02 tcodes

Hi Experts,
I have created a new sub screen 0999 inside program SAPLXKM1 . This subscreen is being called from PBO of screen 0399 / 3399 of SAPLKMA1. During cost center creation (KS01) , one new tab 'Add. fields ' has been added but 0999 screen fields are not being displayed (tab page is blank).
CALL CUSTOMER-SUBSCREEN custflds INCLUDING 'SAPLXKM1' '0999'.
Enhancement : COOMKS01.
Please help what i have missed in this enhancement. Please let me know if there is any step step documentation for the same.
Thanks,
Arnab

Hi
Please check whether
1. you have added the custom fields and related texts to the subscreen 0999
2. you have written code in function exits for data export and import from screen to screen
Try passing the values to screen by using the below exits.
EXIT_SAPLKMA1_001 Flow Logic PBO
EXIT_SAPLKMA1_002 Flow Logic PAI
Shiva

How can I modify the Contacts Template to display additional fields with out selecting "add field" everytime?

How can I modify the contacts template in either iCloud, my iPhone, or my iPad to display additional fields that I always use ... example: How can I get Job Title to always be a fillable field with out selecting "add field" everytime?

Let the HairSalon implement the java.lang.Comparable interface. You'll need to write code for
public int compareTo(Object o1, Object o2)
The compare method would cast the Objects to HairSalons and return the difference in price.
Then use java.util.Arrays.sort(Object []);

Table Maintenance - Add field not in table for display

I have a Z table which has five fields of which one of them is the GL account field. I need to display the description of the account from SKAT-TXT20 also in SM30 so that In SM30 when the user looks at the table, they should be able to see six fields. I can code the PBO / PAI to pull data from the table, but am not sure how to enhance the table control that SAP generates automatically when you generate table maintenance from SE11's Table Maintenance generator so that the sixth field can be displayed.
Thanks

Hi,
I hope below solution will work for your problem:
to update field based on other fields of the same table follow below path and create a routine.
go to se11 open the Z-table in change mode > utilities> table maintenece generator- and then
environment> modification> events....
then creat routine based on your requirement.
regards,
munvar.

Fields not getting displayed in AdvancedTable

I have created AdvancedTable region following the steps given in help of Jdeveloper.
Under advancedTable I have created 3 columns, one having a messageChoice item and rest two items are messageTextInput.I have set the ViewObject property of AdvancedTable and have also set the viewAttributes for items.
But when I run the page, It does not display any fields of AdvancedTable. It just gives the table outline and text that is set for table empty property.
I have also executed the VO in processRequest of page's controller.
What could be the reason for the fields not been displayed?
Thanks in advance,
Mitiksha

You should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
You can also add a set of new rows initially by creating and inserting rows in the vo in your PR.

How to add field to the header for FBL5N ALV report

Hi,
I need to add fields to the customer line item display ALV report(FBL5N) header part.Right now there are four fields in the header like customer, company code, name and city, after that I need to add first name last name and phone no. Can any one tell me where exactly I need to add and populate there fields to be appear in ALV output list.
Thanks in Advance
Swapna

Yes I have tried, I have place a break point in that perform but it does not stop. I think that is not the correct place to added and populate fields. That routine is for populate selection screen ranges single and multiple values and parameters only.
Thanks
Swapna

Urgent: Add field in generic data source

Hi,
Could anyone please help me out in resolving the issue to add field from different table in generic datasource.
How can I add it in R/3 data source when a function module was created in ABAP to generate fields from PLPO table?
Whatz the changes has to be done at BW side to map the added field?
Requirement
1) Need one more field in the extractor. Field name is PLAS-LOEKZ. Initially client wanted me to add PLPO-LOEKZ which I added, now he needs the same fields from both the table (PLAS and PLPO).
2)The name of the extractor/structure is ZBW_ROUTINGS_OPERATION
3)Now, we need to add this field (LOEKZ from PLAS) in the function module as well. FM name is: Z_BW_ROUTE_OPERATION_EXTRACTOR. This will be in a SELECT query. We need to add this field in the SELECT statement.
Testing will be done in following steps
1) Go to Transaction RSA3.
2) Enter the data source Z_BW_OPERATION_ATTR(not sure about the name though, but it should end with OPERATION_ATTR)
3) Enter the following details:
EXTTY I
PLNNR 50000032
PLNTY N
4) Now execute (F8) the transaction.
5) Click on Display List
6) In the output, we should be able to see these 2 columns(PLAS-LOEKZ) and (PLPO-LOEKZ)
Please send your valuable suggestions to resolve the issue ASAP as its damn urgent.

Hi,
Here is an overview of the solution -
Use T.Code SE11> ZBW_ROUTINGS_OPERATION. Add your new field (PLAS-LOEKZ) to this table, check, save, activate. Edit your function module, SE37> Z_BW_ROUTE_OPERATION_EXTRACTOR and add your code to look up the correct value of this field LOEKZ from the table PLAS, check, save, activate. (Note that SAP provides a sample function module you can use as a template and customize for your requirements. This sample function module is RSAX_BIW_GET_DATA_SIMPLE.)
Your Generic DataSource Z_BW_OPERATION_ATTR is already created, you dont have to change any settings here. Just regenerate it in RSO2. Now test the extraction for the DataSource in RSA3.
Hope this helps
Sandeep

How to Add fields in dynamic selection LDB BRF

Hi All,
I have requirement to add a field BSEG-ZLSCH in Logical Database BRF dynamic selection.
I have tried doing the same by using below mentioned link but its not appearing in the report dynamic selection screen
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Could you please help me a Legal change delivery is pending due to this issue.
Thanks and best regards,
Niteesh Rai

Dear Niteesh,
The Logical Data Base BRF reads table BKPF and BSEG, but there is no
option to include fields from BSEG in the dynamic selection.
You can display all the tables included in BRF, but only fields from
BKPF could be included in the dynamic selection. You cannot add
entries from BSEG, BSET, KNB1, KNBK, and so on that are listed here.
You are right, there is not note that explains this behaviour, but I
inform you what is the system design. This has been confirmed by my
Development colleagues.
Regarding to note 832997, this is valid for releases 500 and 600 when
New G/L is available. The system functionality has been enhanced in
release 500 so you can add fields from FAGLFREESEL that is similar
to BSEG with New G/L.
BR, Hana

I need to add fields in additional fields B the sales order line item

i need to add fields in additional fields B beside the field (icon_val_quantity_ structure) in the sales order line item, How to achicve this? please help me..

Please fined the below solution for achieving your requirement.
1. Add new filed "B" in table VBAP.
a) T.code SE11 --> Enter structure name VBAP --> display
b) Goto --> Append Structure --> Enter Structure name and new field "B"
2. request your basis team and take the access key for modification of stabdard program SAPMV45A & Screen: 8459
   a) After receiving access key for standard program then got o SE51 --> enter program name SAPMV45A & Screen: 8459
   b) click change Button
   c) click layout button
   d) add new field "B" below of the screen (F6 -> enter table name : VBAP --> get from dictionary --> selet new field and past in screen )
3) write below code in flow logic
PROCESS BEFORE OUTPUT.
                           Verarbeitung vor der Ausgabe
MODULE ZZPB_INITIALIZE_8459.
MODULE ZZPB_OUTPUT_8459.
PROCESS AFTER INPUT.
CHAIN.
    FIELD VBAP-New field name "B".
    FIELD ZVC_SALES_EXPORT-ZZAPLHENKO.
ENDCHAIN.
MODULE ZZPA_OUTPUT_8459.
4. functin Module code
module ZZPB_OUTPUT_8459 output.
Data: l_v_actve type ale_active,
        l_v_ttyp type c.
Data: l_v_tragr type tragr.
l_v_ttyp = t180-trtyp.
if l_v_actve is initial.
    l_v_ttyp = 'A'.
endif.
LOOP AT SCREEN.
    CASE l_v_ttyp.
      WHEN 'A' OR 'C'.
        SCREEN-INPUT = 0.
    ENDCASE.
ENDLOOP.

Add Fields from table ADRC (Fields Name 1 to 4) for Open Item Processing

Hi SAP Expert:
Our client requires vendor/customer name to be displayed in the open item processing line layout for transaction code f-58, so they can double check if the vendor name is complete as intended.
We intend to add fields from table ADRC instead of REGUH since the characters in maintaining vendor/customer name is 40 characters and REGUH - ZNME1s are only 35 characters.
We have managed to add fields from ADRC and change the SAPDF05X program and were able to display the names in open item layout, except that the program seems to "automatically" create a generic table which only carries 30 characters of the vendor/customer name. The source table should be RFOPS_DK but the program automatically looks up from table RFOPS_GEN for the particular fields - Name 1 to 4. Is there a way to "instruct" the program to use RFOPS_DK instead of RFOPS_GEN?
Hope this will merit somebody's attention... Thanks !!!

Thanks, i have assigned the layout via o7v3, it is the program that i have a problem with, actually another program that we change is the program MF05BFPO where it generates data to be displayed in the FBZ4 screen, though we add a field with 40 characters (ADRC Name 1 to 4) what the program dispalys is a 30 character Name1 to 4 from structure RFOPS_GEN.
My question is can i extend/change the structure RFOP_GEN to 40 characters, is there any SAP standard program that will aftected if i do so? thank very much...
Lorena

Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV

Hi All,
I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction.
I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog.
I need these fields output only for ALV display only.
Please let me know which enhancement i need to write code to enhance the output with these filed values added to the ALV internal table
Thanks in Advance
Arun

Hi All,
I am able to get the field EINDT and SLFDT into the structure using Append structure and is also getting displayed in the output in ALV.
But i need to know how to add code for filling these fields and passing into ALV. I need to know the Enhancement spot.
Please let me know how to achieve this scenario
Thanks
Arun

Add field to item position overview of Purchase Order

Dear SRM gurus,
I'm working on a change request of a customer.
They want to add a field to the item overview position of Purchase Orders.
They are using SRM 4.0 in Extended Classic Scenario.
When displaying the list of Purchase Orders only the headers are shown. When clicking on a header the item positions are shown below the header. In this item overview the customer wants a field to be added.
The field to be added is the GL Account. The customer wants this field to be visible before opening the item of the Purchase Order.
We already know which screen should be changed to display the field.
The screen is SAPLBBP_PO_UI_ITS and screen number 4000.
Is it possible to add fields to this screen?
If it is possible, how can this be done?
Thank you in advance for your support,
Best regards,
Jean-Pierre

Is there a solution yet?
At my company they also want to add a column to block Items in Shopping Cart.
The structures mentioned in the note are all in the item details but not in the overview.
regards,
Wim

Add fields to LRF1 display!

Similar Messages

Maybe you are looking for