Need Help Trobleshooting Calendar Page...

I am working on a website for my son's little league football team and have run into some issues with the Calendar page I have put together. This page can be found at http://web.mac.com/lonzom10/SeymourEagle_Grasshoppers/EagleCalendar.html
I built the page using an iWeb 08 template. Drug my pics in, added an HTML snippet for the header text and then added another HTML Snippet into the body of the page for my calendar layout and functionality. I have tags inserted at the top for each month so that when I click on the month, the page should jump directly to the section I have set-up for that month. So if I click on December at the top, the page should automatically jump down to the December section at the bottom of the page. The problem I have is that the December link appears to only be reading the HTML Snippet Frame... so when I click on it, the page refreshes and displays the HTML I entered into that specific Snippet window and not the background colors or images I had used when setting up the page. Check out the URL above and click on one of the the months listed at the top of the page to see what I am referring too.
Anyone know how I can get these links to jump and display the entire page and not just the specific snippet window or frame?

The December snippet is overlapping into the footer that probably will mess up performance. You can view the page's layout by using the View->Show Layout menu option.
Go to the Inspector/Page/Layout pane and increase the page height until December falls entirely within the body of the page. That should do it.
How did you add the anchors? Are they just hyperlinks to the same page?
OT

Similar Messages

  • Noob Needs Help - Importing Html Pages into "My Site"

    Greetings
    I am sure this is a noob question that may have been asked, but I couldn't find it by searching so here goes.
    I jumped right into Dream Weaver, following an online tutorial... and have a decent webpage but I must have skipped some steps or missed something and I would hate to backtrack and do it all over again...
    When I began, I just started working on a HTML page... and now that its done, I want to make it a template etc...
    But I never created a "site" as far as SITE > NEW SITE etc.
    So now that I have, I need to tell DW that "These pages are included... these images are included, all that neat SPRY stuff I have done needs to be "in the site".
    I am looking for a button that says, "Hey dummy, you need to select the pages that are included in your site" but can't find it...
    Any help?
    Thanks, in Advance
    Greg
    www.revfan.com

    Creating  your first web site in DW CS5 -
    http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • Need Help Fast! Page is dispalying twice in quiz

    I have created a quiz using tips from another post in this
    forum. I insterted a regular slide with a continue button before
    the quiz questions. I insterted another regular slide at the end of
    the questions with a re-take button that points to that first
    slide. This part is working great. When I take the published quiz,
    I click the continue button, and instead of continuing, the slide
    redisplays. I click the button again, and it moves forward like
    it's supposed to. Any advice?
    I'm supposed to have these posted in our LMS today for
    testing, so I need help fast!!! Thanks!!

    What you're seeing is likely the result of a MS patch for IE
    in response
    to the Eolas patent suit.
    MS recently updated IE so any content shown in a page using
    the Embed,
    Object, or Script tags will need to be 'activated' before
    they can be
    clicked (or otherwise 'interacted with').
    Your home computer probably hasn't had the latest security
    rollup
    installed, is why you're not seeing the issue on that
    machine.
    There is a work around, many site mention it. This may be a
    good place
    to start:
    http://www.macromedia.com/devnet/activecontent/articles/devletter.html
    Erik
    dukekelly wrote:
    > Why is it that as soon as you ask for help, you find the
    answer?
    >
    > This isn't a captivate problem at all. It's an IE
    problem. Because the button
    > is a control in Flash, our systems where I work are
    requiring us to click the
    > screen to activate the controls. THEN you have to click
    the button. When I play
    > the movie on my home computer, this phenomenon isn't
    happening. Now, how am I
    > supposed to deal with that??? ASRRGGGHH!!!
    >
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.macromedia.com/support/forums/team_macromedia/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/groups?q=macromedia.authorware

  • Need help adding a page to an existing website

    Hey guys....I'm, as the subject states, a newbie to Dreamweaver.  I am needing to add a page to an existing website.  Simple enough...or so it seems...anyway, I went to the site, copied the source coding, went back to Dreamweaver, pasted into the code box, and up pops the page I copied.  Great!  So then I make my changes so that the page states what I want it to say, link it to what I need to hyperlink it to, then try to upload the page back onto the server....and here's where I get lost...I go to the web to check the site, and the page that I copied and made my own is not there.  The link didn't work and the page is nowhere to be found.  I don't mind whatsoever telling any of the what the site is (not sure if I can do that here), but any help would be very grateful!!!  I'm not sure what I am doing wrong obviously.  Many, many thanks in advance for any help you can give me! 
    Jim

    At the moment the link you refer to goes to the file ashby.php
    http://www.superiorcareplus.com/ashby.php?s=1
    Do you have a page named ashby.php in your site folder?
    If you do copy that and make the changes you require. Save it as whisperer.php
    Now you need to change the link from ashby.php to whisperer.php
    <div class="leftMenu"><a class="menuLeft" href="ashby.php?s=1">Becoming an Alzheimer's Whisperer</a></div>
    So it looks like this:
    <div class="leftMenu"><a class="menuLeft" href="whisperer.php">Becoming an Alzheimer's Whisperer</a></div>
    I'm not sure if it will work because the link has a variable (?s=1) after it but as the links all go to different pages the information probably isn't being fetched from a database. In other words all the pages appear to exist as individual pages. I don't know what 's' the variable refers to.

  • Day one of my new MacBook Pro & I desparately need help with calendar and email

    It's day one of my new relationship with a Mac, and I need help! I'd like to use microsoft exchange to sync my calendars to iCal &amp; my emails the way I currently do with my iPhone 4 and iPad 2. The problem is that all I get are error messages. They either say that communication with the server cannot be established or communication to ports 80 &amp; 440 cannot be established. One account I'd an ssl and the others are gmail. Please advise!

    anyone? please? i would appreciate any information.

  • Need help stopping home page from appearing

    Hello:
    I've designed and programed the site www.pawsandclawspets.com
    but I can't figure our how to keep the home page from flashing when
    going from one page to the next. I have all my movies loading onto
    a level above it and don't want to hide the home page entirely as I
    am using the nav at the top on all the pages.
    Any thoughts?
    Thanks!

    boss33 wrote:
    > Hi pple, need help here.
    >
    > Trying to make a site that uses scriptaculous and a few
    other scripts like
    > prototype and a few more.
    >
    > The thing is I can't seem to get the first image to
    randomize on the site. So
    > I've decided to discard that idea and move over to
    making the home page one of
    > my other pages specifically the "beauty" or as I call it
    the art page.
    >
    The first image on your page is this:
    <img id="logo" src="
    http://test.inspiringmen.com/images/logo.png"
    ... />
    onload=function(){
    var imgs=[
    "/images/logo.png",
    "/images/another.png",
    "/images/yetanother.jpg",
    "/images/onemore.jpg"];
    document.getElementById("logo").src=imgs[(+new
    Date())%imgs.length];
    This assumes that the "images" folder is at the root level of
    your site.
    You may add or remove image paths from the "imgs" array at
    will.
    Mick

  • NEED HELP PUTTING MULTIPLE PAGES TOGETHER IN 1 PDF

    HOW DO I PUT 10 PAGES TOGETHER TO OPEN IN 1 PDF?

    Thanks Janelle - I do not have that ability with the Epson RX580. Epson just answered my tech support question with this answer:
    I am sorry you are experiencing difficulties with your EPSON Stylus Photo RX580. Unfortunately this feature is not available with Mac OS X. You will need a third-party software that will help you with this, such as Poster Print for Mac or Tiler. Please note though that Epson does not support these applications.
    So I guess my question becomes what software can I use to print my images on multiple pages. As I do large photo transfers I need to be able to do this with my mac in an efficient way and not try to cut portions of image into seperate print jobs that would be too time consuming. HAve you had any experience with other software. If not I guess the next question  what printer would you recommend that would do this with my MAC. I have included a pic of one of my larger transfers on a cupboard. To do this I needed the image to be tiled on 8 different sheet of 8.5x11 so this is a feature I need through either software or a printer that is easy to use and easily accessible. Thanks Krista
    I am inl

  • Need help making photo page look clean,Time to show up on Google? Photoshop

    Just bought this Mac 2 days ago and am trying to make the switch. I was computer illeterate on my Dell as well but so far this program is pretty neat. I am trying to get my photo page cleaned up. I would like all the photos in a single row across the page with only one photo displayed underneath. I have seen a few demos with that done but I cannot figure it out. Ideally a slideshow would start automatically but I really just want a cleaned up page vs. a blob of photos.
    My site is http://www.greasysideup.com
    The picture demo is here http://www.apple.com/ilife/iweb/#album - the scuba picture on the far right of the iweb showcase is the look I am going for.
    Additionally how long does it take to show up on a google search? I am following one of the listings on here on how to do that. On the google search pages there is a brief description of the page as well, I believe it is the title page. How do I make Google say how cool my site is? if it ever shows up on google?
    Last question - is there a program on my Mac similar to photoshop? I want to do some simple 3-d looking text angled slightly as if it is coming out of the screen with my name and the name of my business.
    The other thing I want to do is take this picture, make the background black and make the planes orange or red then put those in the background on one of the pages.
    /Users/joshwilson/Downloads/Yak50_profile.jpg
    (I need to learn to post a jpg in the forums as well I guess!!) The photo is the last one on my website photo page labeled Yak 50_profile. I want to make the background black and the outline orange.
    Thanks for all the help. This site is great! I think I'll be glad I made the Mac Switch.
    Message was edited by: GreasySideUp
    Message was edited by: GreasySideUp

    I've done a section on search engines here...
    http://www.iwebformusicians.com/SearchEngines/SEO.html
    The page about sitemaps is here...
    http://www.iwebformusicians.com/SearchEngines/Sitemap.html
    There's a link on the above page to a free sitemap generator that will produce the sitemap for you in the correct format.

  • Need help with SWF page transitions please :)

    I am having an issue recreating something I have seen on
    other flash sites... (For example on 2Advanced.com) It is hard to
    explain but I will do my best. I am advanced in design, layout,
    tweening, and am a beginner to intermediate action scripter. So
    even if your solution is a point in the right direction to some
    code I could pick up and noodle around with that would be great.
    That having been said, on to the issue, it's a 2 parter:
    Part 1:
    I have a Master FLA (or SWF) containing navigation that loads
    secondary SWF pages into movie clip containers for the 5 additional
    pages of the site. These load above the Master movie clip masking
    it (Navigation floats above) so the loaded pages are sandwiched in
    between.
    View page in it's current state here:
    http://sky.prohosting.com/tk421808/rwip/gallery_MAIN.html
    This works ok right now, but I have the SWFs replacing one
    another in one single movie clip container. What I would like to do
    is similar to shuffling 5 cards... if you want the 4th card down
    you pull it out, it goes to the top and slides over the last
    visible card on top. So I would like the first page clicked to
    slide in covering the master MC, the second page clicked, to slide
    in covering that one, and so on and so forth. This would be easy if
    the pages were linear, then I could just stack the movie clips, but
    since the user will click out of order I need a way to load one
    into MC_2 (on top), Then when another is clicked have the MC_2 SWF
    move down a level (Swap MC?) to allow the second to slide in above,
    and then delete the movie that has moved down into level one
    (Bottom) then have this repeat when another movie is clicked. This
    way it will look like the page you clicked is always sliding in
    over the one you are leaving.
    Part 2:
    I have no idea how to do this next part but... I believe it
    involves a gotoAndPlay. I would like to have animation in the movie
    that is unloading after the button for the next page to load is
    clicked... in other words, you have loaded a page, you click on
    another link, and before the new external SWF page loads, the
    current performs a gotoAndPlay where I have animated some
    de-constructing swipes that remove the text, shapes holding the
    text, and the image. ONLY THEN does it start to load the movie for
    the link it selected. I think what I am trying to ask here is how
    does it carry the link through the unloading animation until it's
    done and then execute the loading of the new external SWF of the
    link they just clicked?
    I pray this makes sense... If not I would be happy to explain
    further. :) Thanks in advance for any help!

    >> I have no idea how to do this next part but... I
    believe it involves a
    gotoAndPlay. I would like to have animation in the movie that
    is unloading
    after the button for the next page to load is clicked... in
    other words,
    you
    have loaded a page, you click on another link, and before the
    new external
    SWF
    page loads, the current performs a gotoAndPlay where I have
    animated some
    deconstructing swipes that remove the text, shapes holding
    the text and them
    the image, and ONLY THEN does it start to load the movie for
    the link it
    selected. I think what I am trying to ask here is how does it
    carry the
    link
    through the animation until it's done and then execute the
    loading of the
    external SWF of the link they just clicked?
    <<
    You don't use frames. I'd probably use Fuse for this - which
    is a sequencing
    engine. (www.mosessupposes.com) You can call a function when
    the sequence is
    done animating - using what's known as a callBack function.
    That'd be the
    best way, IMO.
    For part one, you could either place mutliple empty movie
    clips, or just
    create them using createEmptyMovieClip - which is a MovieClip
    method, and
    then load your swfs into them with MovieClipLoader. You can
    use swapDepths
    for layer control, in order to have any given clip move above
    another, layer
    wise.
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • Friends need help desperate-- Second page not printing from the beginning

    Hi Friends,
    I have a large layout whose main-section is 8.5x20 (Width&height) which has 2 frames each having 2 repeating frames and about 20 fields in each repeating frame. When I run the report it shows the report right, but when I print, it prints only the first half since the report is long. When I change the property of the second frame of 'Page break before' to 'yes' it prints the second frame on the second page but print it at the same position as it printed on the first, and top of second page is all blank. How do I make to print from the beginning of the second page. Need your help.
    Thanks
    Joe.

    Hello,
    Most of the times, these problem are solved by "enclosing" the "Repeating frames" in frames with "Vertical Eleasticity" set to "Variable"
    Regards

  • Need help finding proper page for Extending OA Framework

    I am using OAF 11.5.10 CU2. We have a requirement to modify the table that shows on the OTL timecard notification. This is what shows when u go to the "Worklist Timecard Approval" responsibility and select the notification with type of "OTL Workflows for Employees". The table contains project number, we want to change that to project name. We also need to add a custom comments field.
    When I go thru the "Extending OA Framework Applications" documentation it shows me how to find the page to export from the MDS repository. However, when I do that it doesn't contain the Timecard Entries table as expected. The page I exported was /oracle/apps/fnd/wf/worklist/webui/NotifDetailsPG, as the "About this Page" shows.
    Please help me find the proper xml page to extend for this requirement.

    t looks like it does creates the web bean dynamically. This is the controller code that gets fired when the details button is selected, which is the timecard details.
    if(s9.equals("Detail"))
    oapagecontext.removeSessionValue("TimecardBlockCount");
    oapagecontext.removeSessionValue("TimecardAttributeCount");
    flag = false;
    GlobalUtilities.putSessionValue(oapagecontext, "FOOTER", "detail");
    oapagecontext.putSessionValue("TimecardMode", "TIMECARD-REVIEW");
    oawebbean.addIndexedChild(createWebBean(oapagecontext, oawebbean, "Hxctimecard"));
    So How would I know how to find this web bean to make the changes?

  • Need help in smartforms page break

    HI Experts,
    I need yout help in Smartforms.
    My requirement is I want to check my current page count with total number of pages in smartform.
    Based on above , I wish to print some text only on the main window of last page.Currently, the text is getting printed on all pages.
    Steps taken:
    1) SFSY-FORMPAGES & SFSY-PAGE already checked but both of them get set simultaneously so the concept doesn't work.
    2) Tried creating a custom FM and using total number of line items available at ITEM level . Doesn't work .
    Any help would be highly appreciated.
    Thanks,
    Abhinav.

    Hi sap_wiz,
    I have 2 pages into my smartform ( FIRST & NEXT ). The SFSY-FORMPAGES parameter is not getting set at the trigger of MAIN window of FIRST page .
    If I check the value both FORMPAGES & PAGES parameter are 1 and on next page it gets set as 2 & 2. So I am not able to use SFSY concept.
    Hi DeepakNandikanti ,
    I wish to print the text at the end of MAIN window towards the FOOTER of table ( MAIN window has a table ) and not outside the window.
    Thanks,
    Abhinav.

  • Need Help Starting CSS Page Layout

    Hi, I need a little help getting started in creating a CSS
    layout page in Dreamweaver CS4. I am following a tutorial online
    but I have run into a problem. What I am trying to do is get a
    simple CSS layout started. Below I have listed my steps.
    1) First I created a new .html page and named it "index.html"
    2) Next, in the "Properties" panel I clicked the "CSS" button
    3) I then selected the "Edit Rule" button and a window opened
    called "New CSS Rule"
    4) I then left all default settings and in the window where
    it asked me for a name for my selector I typed in:
    main_layout.css
    Then I got this message below.
    "Class names must start with an alphabetical character
    preceded by an optional period. There should be no
    spaces or additional punctuation."
    What am I doing wrong? Can someone please tell me the correct
    steps to start a CSS layout in DW CS4?
    Thanks

    Undescore are Ok in CSS, your problem is the starting. When
    you define a
    class in CSS you have to start the calss name with a period.
    Plus they
    cannot be a period after so...
    If you want to define a class.
    main_layout.css is not OK
    .main_layout is OK
    main_layout is not OK
    Putting a ".css" a the end is for a file name not a selector
    So with my example .main_layout you would then applie this
    class to a tag
    like this
    <p class=" main_layout">Put text here</p>
    Now if you want to define a ID selector then you start tou
    selector eith "#"
    no quotation mark
    so
    #container {
    position:relative;
    background-color: #fff;
    width: 800px;
    margin: 0 auto;
    top: 20px;
    border-top: 0;
    border-right: 1px solid #b7b7b7;
    border-bottom: 0;
    border-left: 1px solid #b7b7b7;
    And then you apply this as an id
    <div id="container">Put content here</div>
    Do you get it. If not then go get a good book on CSS.
    aka Frenchy ASP
    "tweened" <[email protected]> wrote in
    message
    news:ge27el$a8i$[email protected]..
    > I'm still learning CSS myself. But I have never seen a
    style sheet name
    > with an
    > underscore in it or any punctuation for that matter. If
    you look at the
    > last
    > sentence in the error message you got, It tells you that
    no additional
    > punctuation can be used. Try using "style" as your css
    name. the same
    > would go
    > for the property tags within the style sheet, don't use
    any punctuation in
    > the
    > names.
    >

  • Need help with automatic page when a box is filled with a letter

    I use the Adobe Livecycle Designer 8.0, version 8.0.1291.1.339988.
    I'm trying to make a test for cars in Livecycle, where the car is tested and then there should be a box after every kind of test such as: Brakes front, brakes back, parking brakes, lights, engine, oillevel, exhaust system, clutch and so on..
    When a specific letter is written in the box a page should pop-up where the tester can write what the problem is. And then afterwards continune with the rest of the test.
    In the box, there should be four choices, a G, R and A. When there's a G there shouldn't pop-up a page, because that part is fine. But when there's a R (reparation) and an A (remark), this page should pop-up with the text of what part of the car it is and a text-field where the mechanic that tests the car can write what needs reparing or what's a remark.
    Can anyone help me? I really would appriciate it!
    Jacob Langer

    To support what King_Penguin has provided, here is a support document that describes the steps to take with a device in Recovery Mode. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support

  • Need help with Calendar

    Hi There,
    I have a BB 8310 from AT &T (complete morons) who had me update my BB software to 4.5 today and also update the desktop manager to 4.6.  Prior to that no one said anything about doing a Backup & Restore so once all was done after hours of time wasted (I hate the new look).  Anyways, I realized that all my contacts were in my Yahoo email so once I synced I was able to retrieve them.  However, my calendar is saved in MS Outlook which I haven't used for email in over 3 years.  My outlook is connected to an old email address which has been cancelled years ago.  How do I get all my calendar to sync from outlook to my BB?  Please help as it will save me lots of time.
    Also, why is my BB Messenger stuck under a folder called "Applications" and how do I move all those out of the folder and onto my home screen?
    Finally, how do I get a home screen where I can see upcoming appointments and messages (as I used to before this dumb update)?
    Thanks,
    Rani
    Solved!
    Go to Solution.

    ranipabla wrote:
    Hi There,
    Also, why is my BB Messenger stuck under a folder called "Applications" and how do I move all those out of the folder and onto my home screen?
    Finally, how do I get a home screen where I can see upcoming appointments and messages (as I used to before this dumb update)?
    Thanks,
    Rani
    For moving application to the home screen select/highlight desired icon -> click Menu -> Move to Folder -> Home 
    To get to see upcoming appiontments you need to have a theme. In your previous OS different theme called 'Today' was doing the thing for you. You can have a google search for having that theme.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

Maybe you are looking for