Add midnigh time to a date

Hi,
<cfset endDate = DateAdd("d", 1, endDate)> this will add one date into the endDate. Instead of add one date, i want it to add the midnigh time to the endDate. such as: 2012/10/01 23:59:59
i had tried this
<cfset endDate= DateAdd("ms",86399997,endDate) /> but got errror below
ms is not a valid date/time format.
anyone can help me with this?
Thanks

I'm assuming you want to use this adjusted date/time for some sort of "within" or "before" check in a query where clause. If so I usually add a day and combine it with a less than check. Using your endDate code:
<cfset variables.endDate = DateAdd("d", 1, variables.endDate) />
where date < <cfqueryparam value="#variables.endDate#" cfsqltype="CF_SQL_TIMESTAMP" />
Another option, assuming endDate is truncated to just the date (no hours, minutes, or seconds), you can use createTime to add the time:
<cfset variables.endDate = variables.endDate + createTime(23,59,59) />
Another option is to add a day and substract a second.

Similar Messages

Transit time to invoice date?

Hi friends,
how to add transit time to invoice date? if it is through user exit, which user exit will you use in sap SD?
thanks in advance
krishnamohan

Hi,
You can use USEREXIT_FILL_VBRK_VBRP of program RV60AFZC.

How do you add time to the time part of date in oracle

Guys:
I need to add 5 hours to the date in a date column. I did it the foll. way.
for ex:
select to_char(sysdate, 'mm/dd/yy hh:mi:ss'), to_char((sysdate + (5/24)), 'mm/dd/yy hh:mi:ss;) from dual;
It works! The second column shows that 3 hours has been added to the time. I am wondering if there is a better way to do it. Any tips/suggestions please.....
I use SQL Server a lot and they have the Dateadd function to add to ay part of the datetime such as day, motnh, year, hours, minutes, etc.

Not Sure !
But, try
dtefield + 5/24
This will dd 5/24 day !

How to add one second to a date time stamp

What is the proper syntax to add one second to a date/timestamp?

Just think about it.
24 hours in a day, 60 mins per hour and 60 second per minute
total of 86400 seconds per day.
So, you add 1/86400 to the date/timestamp column
e.g. select my_date + (1/86400) from my_table;
What is the proper syntax to add one second to a date/timestamp?

Time-dependent master data in the cube and query

Hello,
I have a time-dep. masterdata infoobject with two time-dep attributes (one of them is KF). If i add this infoobject into the cube, what time period SID will be considered during the load? I assume it only matters during load, if i add the KF to the query it gets its value based on the SID in the cube.. right?
Thanks,
vamsi.

If its Time Dependent Master Data object when you run your Master Data if that time any changes to the Master Data that value will be overwrite to the old value you will get the new value. When you run the Query execution the Infocube Master Data infoobject will having the SID that time it will to there it will be displayed at that moved what is the value you have in the Master Data table.
This is what my experience.
Thanks,
Rajendra.A

Data not uploading in Time dependent Master data Infoobject

Hello All,
I have a master data infoobject for HR entity and have to load data from PSA to that info object.
The HR entity infoobject already have sone data like below:
HR Entity
Version
Date from
Date To
x
A
01.07.2013
31.12.9999
x
A
19.04.2013
30.06.2013
x
A
01.09.2012
18.04.2013
x
A
01.01.2012
31.08.2012
x
A
01.01.1000
31.12.2011
Now the data in PSA is as follows:
HR Entity
Start Date
End Date
X
01.01.2012
18.12.2013
Once I loaded this data to the infoobject, i can not see this value which is the latest value of this HR entity.
Can somebody please explain how the data gets loaded in the time dependent master data infoobject and why this entry is not getting loaded in the info object.
Regards
RK

Hi,
did you activate master data after your load?
You can check also version 'M' records and see if your record is there.
The load went green?
The problem is, that your entry overlaps all exisitng time intervals, which can't be deleted or merged as there may be dependent transactional data. You have first to delete the transactional data for this entity.
Then you can delete the time-dependent data and reoload it from your PSA.
BW will build then correct time intervals.
The easiest is to change the time interval in PSA, see example below:
At the moment the time interval is not accepted. But you can add time intervalls before 31.12.2011 and after 01.07.2013, Then system will create remaiing time intervals, e.g. your new record is:
HR Entity
Start Date
End Date
X
01.08.2013
18.12.2013
Result will be:
HR Entity
Version
Date from
Date To
x
A
19.12.2013
31.12.9999
x
A
01.08.2013
18.12.2013
x
A
01.07.2013
31.07.2013
Regards, Jürgen

Can't add new time in pop up menu template

Hope someone can help as I'm lost on this one. I am trying to use the schedule template in iworks09 but I need to add more time variations in the cell pop up menu. I enter the inspector pane for the particular cell and click into cells inspector which shows the pop up menu option with the various time options. When I click to edit the time or add a new time it won't allow me to save it with either AM or PM. This stops the daily hours formula from calculating the correct time worked. Is this a glitch in the program or am I missing something? I need to add 30 minute increments between 11:00 AM and 3:00 PM because according to apple nobody starts or finishes between these times! Any help would be greatly appreciated.

chabotlow,
This is a tricky template, believe me. Numbers is interpreting your pop-up entry as a DATE/TIME value, and apparently you have set your System Preferences > International to not use the AM and PM indicators, so Numbers is reformatting your entry.
The next problem that you are going to encounter is that all the other entries in the POP-UP have an un-displayed DATE of many days earlier, back when the template was designed. So, when you do the subtraction to find the elapsed work time, you will get a big surprise if your POP-UP data was entered on different days. If you want to change a few times on the POP-UP menu, you will have to change them all so that they all reflect the same DATE. That's not as bad as it may seem. Make one "IN" POP-UP and one "OUT" POP-UP. Then copy them to the rest of the table.
Regards,
Jerry

How do you add 1 day to a date in BI answers

Hi,
I tried just putting (date column + 1) in the column formula but it wasn't having
any of it. In SQL you can just put SYSDATE + 1. Is there any way of converting the
date to a number, so I can do maths with it?
Many thanks for any ideas,
- Julian

To Add One day to the column, place the following formula:
TIMESTAMPADD(SQL_TSI_DAY, 1,Time."Day Date")
similarly we can write the formulas using different intervals based on the date format in the column
Here are the intervals :
SQL_TSI_SECOND,
SQL_TSI_MINUTE,
SQL_TSI_HOUR,
SQL_TSI_DAY,
SQL_TSI_WEEK,
SQL_TSI_MONTH,
SQL_TSI_QUARTER,
SQL_TSI_YEAR.
Hope your question is answered.
Thanks,
-Amith.

How to add a time delay of microsecond in labview 2011

can you please help me, how to add a time delay of microseconds in labview 2011 version . I expect a helpful replies

A delay between what and what?
Is this plain LabVIEW, LabVIEW RT, or LabVIEW FPGA? What kind of data acquisition hardware are you using?
What is your OS? An accurate "software only" delay of microsseconds is not possible on windows or any other general purpose OS.
perumpadapu wrote:
... I expect a helpful replies
To get a helpful reply, you need to provide much more detail on what you are trying to do!
LabVIEW Champion . Do more with less code and in less time .

How to add a time stamp to an array

Currently the VI that I have attached has the capacity to log data from the set of 14 arrays. I currently have a tick counter hooked up. However, I would like to add a time stamp that will display the elapsed time in seconds from the begining of the data logging. Could anyone help me out with that? Please see the attached VI and sorry for how messy it is, I have yet to go back and clean up the wiring.
the mess of arrays on the lower left hand of the while loop feed into the "Index Array" building block and from there they will be scaled (for most of the wires the multiplyer is just there so that I can see what channel they will be when I hook it up for logging) The wires then feed into a "Build Array" Building block and I assmed that is where I had to hook up the time stamp for me to be able to log it.
Thanks,
Attachments:
PDAQ56 datalogging V11.vi ‏104 KB

mets501 wrote:
Also, try pressing Ctrl-U on the block diagram. It cleans up the wires for you atomatically :-)
Jeremy
That tool does not exist before LabVIEW 8.6. The original poster attached a VI from LV 8.0
Attached is the VI where I ran Block Diagram cleanup in 8.6.1f1 and back saved to LV 8.0. I went through and cleaned up almost all the coercion dots as well.
The original poster should start working from this file since it is much cleaner than the one they posted.
Attachments:
PDAQ56DataloggingV11.vi ‏84 KB

Modify code to pull the time dependent master data

I fully under stand the suggestion below for the requirement to add the time dependent attribute comp code
thanks fo rthe help but please tell me if there is a way i can modify the abap code and make the user enter the value for the date on which he want to pull th emaster data for company code or keydate to and from and pull the master data, so how will i proceede should i create the variable on 0doc_date and how to modify the code. please help . i have opened another question with same desc as above to assign points
thanks
soniya
The literal within <..> is supposed to be replaced by the actual field name (as I didn't know the fields). In this case, I am changing your code for costcenter/company-code.
data : wa like /bi0/qcostcenter.
select single * from /bi0/qcostcenter into wa
where costcenter = comm_structure-costcenter
and objvers = 'A'
and datefrom le comm_structure-<keydatefield>
and dateto ge comm_structure-<keydatefield>.
if sy-subrc = 0.
result = wa-comp_code.
endif.
abort = 0.
You can use this code for update rule of company_code. You have to replace '<keydatefield>' with a field name that contains the date on which the company is to be derived. If there is a date in your comm_structure (eg aedat) which you can use, you can specify that field in place of this literal (instead of comm_structure-<keydatefld> use comm_structure-aedat). If you have no such field, and you wish to use current date for getting the company code from time-dependent master data, you can use sy-datum (ie replace comm_strucutre-<keydatefld> with sy-datum).
And it should work.
The 'master data attribute' option is one of the options when you create update rule (one of the radio button options).

That the code is doing anyway.
If your txn data in the cube doesn't have a date, how does it know it is Feb data, or, it is March data?
If it has a date or month field, you should modify and use this code to update the company based on that date instead of system date.
Other than that minor variation, it is already doing what you look for.

Changing sampling time for logging data in DSC

currently I created lots of shared variables by Modbus server. I'm wondering when I active logging data to Citadel, there is any option for change sampling time for logging data or not. I only saw option for changing base on percentage of value differences.
Since I want to export them to MS Excel later, I want decrease the number of sample datas by decreasing sampling time.
Thanks in advance.

This is my idea that i try
First, I add Enqueue Message for Enable time case
Then, I create Enable time cases and write box diagram fallow below pic.
But when i run program,it don't work, time don't count
Please help me.

Autofill date/time when entering data?

Hi,
I'm new to Numbers so still learning the ropes, but...
I have made a call log which should automatically enter the date and time when I enter data into a 'Notes' field. This works for the first instance but when a new call is received and I add a new note the date and time changes for all previous notes.
The formula I am using is as follows:
IF(ISBLANK(F3),,NOW())
I have tried to attach the numbers file bu struggling to see how so I've attached a screenshot which might be of use.
Any help greatly appreciated!

the function now() atucally returns now. That is... the date and time it is at the very moment the function is called. You are asking for a timestampt. The best way to implement a timestamp (which technically Numbers DOES NOT HAVE) is to keep a single cell table in a handy place (I keep it in the top left corner), then put the formula:
=now()
in the single cell.
When you add a new entry, select that single cell, copy, then paste formula result.
this can be done quickly when you memorize the key combinations:
copy = <command> + c
paste fomula result = <command> + <shift> + v
You can make suggestions to Apple using the menu item "Numbers > Provide Numbers Feedback"

Batch change time only, not dates

I have imported photos from my cell phone and have discovered that the date stamp on all of them is exactly 7 hrs fast, even though the cell phone itself displays the correct time.
How can I change the time by exactly 7 hours on all of these imported photos (of which there are hundreds), other than one at a time? I see with batch change that you have to change to the same date and time on all your selected photos.
Thanks.
Barb

It will work. Select the pics and use the Hour column to add seven hours. The date will only change adding the seven hours will push the photo past midnight.
So, a photo tagged at 7 am on January 1 will be time shifted to 2pm on January 1
A photo tagged at midday in January 3 will be time shifted to 7pm on January 3
A photo tagged at 8 pm on January 4 will be time shifted to 3 am on January 5
Back up before you try this. If it doesn't work, restore your back up.
Regards
TD

Time and GPS data windows

Hello all
I was presented this sample 1080 frame and was asked if I can do this if time and GPS metadata were part of the video recording. In other words, how do you burn in this data in the video itself. I have P Pro CS 6 @ home and am a complete novice to video editing. Final product may or may not need this, more curious as to how its done - special camera system or in post processing?
Thanks!

If whoever shot the video recorded time of day timecode synced from a GPS receiver that was close to the camera (in your case that looks like it would mean mounted in the helicopter), you can use the time code data to match your GPS metadata to the video. I use an automated process to incorporate the the metadata into the video, but the process is all done with custom software that the CEO of our company wrote. The other people I've seen incorporating GPS metadata into video are also using customized, proprietary processes. If you're adding the data in post, you will have to translate the data into Premiere titles or After Effects text keyframes or something else that you can overlay on the video.
You can also use hardware during your shoot to overlay the GPS data onto the video. I don't use any products that do this, and I don't know how easy they are to find for purchase, but there definitely are people in the geospatial sector who feed video through a GPS-aware piece of video processing hardware that overlays time and position data in real time. In this case you would feed video (most likely through HD-SDI) from your camera to the GPS overlay hardware and then to a recorder.
There certainly aren't any GPS features built into Premiere Pro. If you want to add titles manually, you'll have to match the time code with your GPS data and make a new title each time the GPS info is supposed to update. GPS data is usually some form of table or spreadsheet with time, coordinates, and other positional data, so you can find the correct time in the video and make a title that includes the corresponding coordinates for that time. If you're doing this for more than a few seconds of video, it will be an unreasonably long and tedious process, but it is possible.

Add midnigh time to a date

Similar Messages

Maybe you are looking for