Add new variable in Selection ID for planning book

Hello,
Need your suggestion-
We have requirement to add new variable -like SNP Planner in SNP Selection ID of Planning book. Please suggest steps to configure this
Regards
Pandit

Pandit
There are more than one ways of doing this.
The best option is to create a freely definable attribute (Spro --- APO >> Master data >> Freely definable attributes) at material location level and now you will automatically be able to see the attribute when your create a selection id. But you have to make sure you add logic in your material cIF user exit or create a custom program in APO to populate the desired values for the freely definable attribute for all materials in the selection
Thanks
Saradha

Similar Messages

Add new fields to selection screen for standard billing dule list in CRM

Hi ,
I have one issue with standard program ,tcode is /BEA/IPMI01.
SUB: Adding few new fields like IP to selection screen AND few fields to output list.
As this is a standard program (tcode: /bea/ipmi01) , i searched for BADI,EXITS but couldn't .
Can any one help me how to handle this with out cloning the standard one.
I got some information but succeed.
in SPRO.
/CRM/BILLING/SYSTEM ENHANCMENTS/access billing engine navigator. you will find selection design in the path
/CRMB/OBJECT/DL/REPORT/SELECTION GROPS/DLA/SELECTION FEIDLS.
we can find selecton at this place but i couldnot find how to add new fieds.
Note: i found whatever we do , it willl reflect once we regenerated the program.

Hi,
You may be able to create an append structure to the standard output structure/table. Go to SE11, open the structure and click on append structure.
Regards
Prasenjit

Error in updating ALV field catalog in selection tool for Planning Book

Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.

Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant

Add new variable definition

how to add new variable definition in report painter?

Hi,
in Transaction GR32 use menu ->Report Writer -> Variable -> Create
regards
Walter Habich

Accidentally merged my iPhone with my partners iPhone library now when she adds new app she is asked for my password

Accidentally merged my iPhone with my partners iPhone library now when she adds new app she is asked for my password, when she restores phone, my apps download onto her chosen wallpaper/phone 5c, she still has her content too, it's like we have two accounts merged into one even our music is one big jumbled mess! please help!?!?!

Yeah we thought about just syncing straight to her itune library... But the problem is she had used her iphone 3gs to purchase a boat load of new music and apps during the past 30 days or so... And those now only show up in my itunes library...
Also - I want to be careful not to wipe out all of my content by syncing her phone with my itunes again... Are there any precautions to take to make sure that the sync ensures content writing to her iphone ... rather than the other way around?
Thanks!

HOW TO ADD NEW VARIABLE DATAS ON ALV REPORT

Hi gurus,
I have cretaed one alv report using
REUSE_ALV_GRID_DISPLAY.
I HAVE CALCULATED SOME TOTALS AND STORED ON
ONE VARIABLE .
that variable name is 'toterror'.
now i want to add this variable on first line OF ALV REPORT.
that is i should get LIKE THIS.
PERNR TEXT ACTION [ TITLES OF FIELDS ].THEN
TOTAL ERROR RECORDS '900'.
THEN THE CORRESPONDING FIELDS DATA SHOULD BE DISPLAYED.
HELP ME.
THANKS IN ADVANCE.

Hi
Thanks Ajeet.
The scenario is that I have to create a formula (contract end date-current date) and have to display the result using exeption to highlight the contracts ending in 30-60 days.
The problem is that the info provider does not have any infoobject for date(only valid to and validity start date)
I have created a formula variable on valid to date using replacement path. But dont have any variable to use for current date.
The only time char in the cube is Fiscal yera variant.
How should I go futher creating such formula? Shall I user customer exit variable? But I dont have any date char to create on.
Can you shed some light on this problem
Thanks

Add new batch during count entry (for cycle count by quant LICC)

Hi! We are using LICC for cycle counting by quant as we have mixed storage and do not want to count all the materials in a single bin. Most of the materials involved are batch-managed. One issue we have is we may discover other batches during stock take. In this case, how can we add this to the stock adjustment since we cannot add new item when we use cycle counting by quant?
Appreciate your suggestion in this case.
Cheers!
SF

Hi,
Whenever you find discrappancies, in this case founds, you will note these down and first do an analysis whether this particular batch has been written off in the past as lost. When not, you will make a MB1À or MIGO booking to add this found batch to stock. When yes, you could do a reversal of the issue or do a new receipt.
MdZ

Add new activity in Action box for service notification (Transaction: IW51)

Hi,
I need to add new activity in 'Action box' of service notification (IW5* transaction) .
When the user click this new activity the following actions need to be performed:
1. Change the status of notification (Use VIQMEL structure)
2. Save the notification and exit.
Please let me the process to follow.
Thanks in advance.

Hi,
Please check the FM STATUS_CHANGE_EXTERN or STATUS_CHANGE_INTERN to change user status or system statusCheck in SE37 for documentation ,FM STATUS_READ is used to read system status or user status and also explore the BADI
NOTIF_ACTIONBOX Changing the Functions in the Action Box
regrds
pushpa

How to know which user created a given Selection ID in Planning Book

Dear Expert
Do you know if there is a way to trace who created a given selection ID in DP or SNP planning books?
Thanks!

Hi,
You will get details of of the user who created the selection IDs and date /time details from the database table /SAPAPO/TS_SELKO (Header Selection Variants) .
You may create a simple query for this or an elaborate ABAP report.
Regards
Datta

Ability to call selection profiles in planning book using popup box

Hello does anyone know if it is possible to call a selection profile in a planning book using a popup box?
i.e. perhaps using a macro ?
Any help is greatly appreciated.
Thanks
Edited by: Ballance Agri-Nutrients on Feb 17, 2009 3:10 AM

Just wondering what is the business need this pop-up, based on user settings list of selection profiles already filtered and displayed in the planning book. User can select the profile just by clicking the list of selection profiles provided.
For the web enabled users, they can select data view, and selection profiles before they view the planning book screen. Check with your technical person they should be able to tell you if the same can be used and built a pop-up.
Hope this helps

Selecting photos for a Book

I cannot figure out how to get photos from iPhoto "albums" into a book I want to produce.
There's a selection of recently downloaded photos at the top of the window, and I can move these into the book, but do not see how to move those I put into and "album" for this purpose.

To start a book make an album and put the photos for the book in it, select all and create the book - to add photos to a book taht is in process simply drag photos to the book in the source pane on the left
LN

How can I add a new field in selection screen for this report

*& Report ZGS_BARKODLA_HIZLI_GIRIS
report zgs_barkodla_hizli_giris.
tables: mara,
        mseg,
        mch1,
        *mch1,
        mkpf,
        mchb ,
        makt.
type-pools: esp1.
data: i_message_tab type esp1_message_tab_type,
      wa_message_tab type esp1_message_wa_type ,
      sc_count type i.
ALV
type-pools: slis, kkblo.
data: gs_layout   type slis_layout_alv                     ,
      gt_fldcat   type slis_t_fieldcat_alv with header line,
      gt_header   type slis_t_listheader   with header line,
      gt_sortin   type slis_t_sortinfo_alv with header line,
      g_repid     like sy-repid                            .
define add-fieldcat.
gt_fldcat-fieldname     = &1.
gt_fldcat-ref_tabname   = &2.
gt_fldcat-seltext_s     = &3.
gt_fldcat-seltext_m     = &3.
gt_fldcat-seltext_l     = &3.
gt_fldcat-reptext_ddic = &3.
gt_fldcat-ddictxt       = 'M'.
append gt_fldcat.
clear gt_fldcat.
end-of-definition.
types: begin of titab,
        sel   type xfeld,
        matnr type matnr,
        maktx type maktx,
        charg type charg_d,
        menge type menge_d,
        erfmg type erfmg,
       end of titab.
data : witab type titab.
data : itab type table of titab.
data : ok_code type sy-ucomm.
controls: tc_itab type tableview using screen 0100.
data: gv_header like bapi2017_gm_head_01,
      gv_code   like bapi2017_gm_code.
BAPI export parameters
data: gv_headret type bapi2017_gm_head_ret,
      gv_matdoc type bapi2017_gm_head_ret-mat_doc,
      gv_matyear type bapi2017_gm_head_ret-doc_year.
data : lv_objek like inob-objek .
data : ls_inob like inob .
data : imseg type ty_t_mseg.
data : wmseg type mseg.
data : answer.
data : count type i.
data : v_atinn type atinn.
BAPI movement details
data: i_goodsmvt_items type bapi2017_gm_item_create occurs 0
      with header line.
data: i_return type bapiret2 occurs 0 with header line.
start-of-selection.
call function 'CONVERSION_EXIT_ATINN_INPUT'
   exporting
     input = 'Z_ORAN'
   importing
     output = v_atinn.
call screen 100.
*&      Module status_0100 OUTPUT
module status_0100 output.
set pf-status '100'.
set titlebar '100'.
mseg-werks = 1000.
mseg-umwrk = 1000.
**added
sc_count = sc_count + 1.
if sc_count eq 1.
    mseg-bwart = 313.
endif.
mkpf-budat = sy-datum.
**added
describe table itab lines tc_itab-lines.
endmodule.                 " status_0100 OUTPUT
*&      Module user_command_0100 INPUT
module user_command_0100 input.
data field(20).
data: line_t like sy-index.
data: lines like sy-index.
data line_count like sy-loopc.
data: begin of cols,
         screen      like screen,
         index       type i,
         selected(1) type c,
         vislength   like icon-oleng,
         invisible(1) type c,
       end   of cols.
case ok_code.
    when 'DELE'.
      delete itab where sel eq 'X'.
    when 'ENTE'.
      check *mch1-charg is not initial.
      read table itab into witab with key charg = *mch1-charg.
      if not sy-subrc is initial.
        witab-charg = *mch1-charg.
        select single matnr from mch1 into witab-matnr
                           where charg eq witab-charg.
        if not syst-subrc is initial.
          set cursor field '*MCH1-CHARG'.
          message e115(12) with *mch1-charg.
        endif.
        select single maktx from makt into witab-maktx
                           where matnr eq witab-matnr
                             and spras eq syst-langu.
        witab-erfmg = 1.
        concatenate witab-matnr witab-charg into lv_objek .
        clear ls_inob .
        select single * into ls_inob
                        from inob
                        where objek = lv_objek and
                              klart = '023'    and
                              obtab = 'MCH1' .
        select single atflv from ausp into witab-menge
                 where objek = ls_inob-cuobj and
                       klart = '023' .
        append witab to itab.
**added
        clear *mch1-charg.
**added
      endif.
    when 'SAVE'.
      if mkpf-budat is initial.
        set cursor field 'MKPF-BUDAT'.
        message e055(00).
      endif.
      if mseg-lgort is initial.
        set cursor field 'MSEG-LGORT'.
        message e055(00).
      endif.
      if mseg-umlgo is initial.
        set cursor field 'MSEG-UMLGO'.
        message e055(00).
      endif.
      if mseg-bwart is initial.
        set cursor field 'MSEG-BWART'.
        message e055(00).
      endif.
      refresh imseg.
      loop at itab into witab.
        move-corresponding witab to wmseg.
        append wmseg to imseg.
      endloop.
      call function 'ZMM_POPUP_WITH_DATA'
        exporting
          imseg = imseg
        importing
          answer = answer.
      if answer eq 'Y'.
        perform create_goods_movement.
      endif.
    when 'P--'.
      clear ok_code.
      perform paging using 'P--'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P-'.
      clear ok_code.
      perform paging using 'P-'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P+'.
      clear ok_code.
      clear lines.
      perform paging using 'P+'.
      set cursor field 'MARA-MATNR' line 1.
    when 'P++'.
      clear ok_code.
      perform paging using 'P++'.
      set cursor field 'MARA-MATNR' line 1.
    when 'SORA'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab ascending by (field).
      endif.
    when 'SORZ'.
      read table tc_itab-cols into cols with key selected = 'X'.
      if sy-subrc is initial.
        field = cols-screen.
        field = field+5(10).
        sort itab descending by (field).
      endif.
    when 'PRNT'.
      perform write_alv.
endcase.
endmodule.                 " user_command_0100 INPUT
*&      Module read_table OUTPUT
module read_table output.
mara-matnr = witab-matnr.
makt-maktx = witab-maktx.
mch1-charg = witab-charg.
mseg-menge = witab-menge.
mseg-erfmg = witab-erfmg.
line_count = sy-loopc.
endmodule.                 " read_table OUTPUT
*&      Module write_table INPUT
module write_table input.
witab-matnr = mara-matnr.
witab-maktx = makt-maktx.
witab-charg = mch1-charg.
witab-menge = mseg-menge.
witab-erfmg = mseg-erfmg.
modify itab from witab index tc_itab-current_line.
endmodule.                 " write_table INPUT
*&      Module exit INPUT
module exit input.
leave to screen 0 .
endmodule.                 " exit INPUT
*&      Form create_goods_movement
form create_goods_movement .
clear : gv_header, i_return[], i_goodsmvt_items[].
gv_header-doc_date = gv_header-pstng_date = mkpf-budat.
gv_header-pr_uname = sy-uname.
GM with reference to reservation
loop at itab into witab.
    i_goodsmvt_items-material   = witab-matnr.
    i_goodsmvt_items-entry_qnt = witab-erfmg.
    i_goodsmvt_items-entry_uom = 'ST'.
    i_goodsmvt_items-move_type = mseg-bwart.
    i_goodsmvt_items-plant      = mseg-werks.
    i_goodsmvt_items-stge_loc   = mseg-lgort.
    i_goodsmvt_items-move_plant = mseg-umwrk.
    i_goodsmvt_items-move_stloc = mseg-umlgo.
    i_goodsmvt_items-batch      = witab-charg.
    append i_goodsmvt_items.
endloop.
find BAPI processing transaction
if gv_code is initial.
    perform determine_bapi_code using mseg-bwart
                             changing gv_code.
endif.
call function 'BAPI_GOODSMVT_CREATE'
    exporting
      goodsmvt_header = gv_header
      goodsmvt_code    = gv_code
    importing
      goodsmvt_headret = gv_headret
      materialdocument = gv_matdoc
      matdocumentyear = gv_matyear
    tables
      goodsmvt_item    = i_goodsmvt_items
      return           = i_return[].
cancel blocking process
loop at i_return where type eq 'E' or type eq 'A' or type eq 'X'.
    exit.
endloop.
if sy-subrc ne 0.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_COMMIT'
      exporting
        wait = 'X'.
    wa_message_tab-msgid = 'M7'..
    wa_message_tab-msgty = 'S'.
    wa_message_tab-msgno = '060'.
    wa_message_tab-msgv1 = gv_matdoc.
    wa_message_tab-msgv2 = ''.
    wa_message_tab-msgv3 = ''.
    wa_message_tab-msgv4 = ''.
    append wa_message_tab to i_message_tab.
else.
    refresh i_message_tab.
    call function 'BAPI_TRANSACTION_ROLLBACK'.
write a message as there is an unexpected error.
    loop at i_return.
      wa_message_tab-msgid = i_return-id.
      wa_message_tab-msgty = i_return-type.
      wa_message_tab-msgno = i_return-number.
      wa_message_tab-msgv1 = i_return-message_v1.
      wa_message_tab-msgv2 = i_return-message_v2.
      wa_message_tab-msgv3 = i_return-message_v3.
      wa_message_tab-msgv4 = i_return-message_v4.
      append wa_message_tab to i_message_tab.
    endloop.
endif.
call function 'C14Z_MESSAGES_SHOW_AS_POPUP'
    tables
      i_message_tab = i_message_tab.
endform.                    " create_goods_movement
*&      Form determine_bapi_code
form determine_bapi_code using p_bwart type bwart
changing p_code type bapi2017_gm_code.
data: lt_t158b type table of t158b with header line.
clear p_code.
select tcode from t158b into corresponding fields of table lt_t158b
where bwart eq p_bwart.
loop at lt_t158b.
    select single gmcode from t158g into p_code
    where tcode eq lt_t158b-tcode.
    if sy-subrc is initial.
      exit.
    endif.
endloop.
endform. " determine_bapi_code
*&      Form paging
form paging using code.
data: i type i,
        j type i.
case code.
    when 'P--'. tc_itab-top_line = 1.
    when 'P-'.
      tc_itab-top_line = tc_itab-top_line - line_count.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
    when 'P+'.
      i = tc_itab-top_line + line_count.
      j = tc_itab-lines - line_count + 1.
      if j le 0.
        j = 1.
      endif.
      if i le j.
        tc_itab-top_line = i.
      else.
        tc_itab-top_line = j.
      endif.
    when 'P++'.
      tc_itab-top_line = tc_itab-lines - line_count + 1.
      if tc_itab-top_line le 0.
        tc_itab-top_line = 1.
      endif.
endcase.
endform.                    " paging
*&      Form write_alv
form write_alv .
perform find_list_header.
perform fill_field_cat.
perform fill_sortinfo.
g_repid = sy-repid.
gs_layout-colwidth_optimize = 'X'.
gs_layout-zebra             = 'X'.
answer = 'Y'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_buffer_active        = ''
      i_callback_program     = g_repid
      i_save                 = 'A'
    i_callback_top_of_page = 'TOP_OF_PAGE'
      is_layout              = gs_layout
      it_fieldcat            = gt_fldcat[]
     it_sort                = gt_sortin[]
    tables
      t_outtab               = itab[].
endform.                    " write_alv
     Form find_list_header
form find_list_header.
data : v_datum(10),
         v_datlo(10),
         v_dathi(10),
         v_uzeit(8).
clear: gt_header, gt_header[].
gt_header-typ = 'H'.
gt_header-info = sy-title.
append gt_header.
clear gt_header.
gt_header-typ = 'S'.
gt_header-key = 'Çalıştırma Zamanı : '.
write syst-datum to v_datum.
write syst-uzeit to v_uzeit.
concatenate v_datum '/' v_uzeit into gt_header-info.
append gt_header.
endform.                    " find_list_header
     Form fill_field_cat
form fill_field_cat.
refresh gt_fldcat.
clear   gt_fldcat.
gt_fldcat-key = 'X'.
add-fieldcat 'MATNR' 'MARA' ''.
add-fieldcat 'MAKTX' 'MAKT' ''.
add-fieldcat 'CHARG' 'MSEG' ''.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'MEINS' 'MARA' 'Olcu Birimi '.
gt_fldcat-do_sum = 'X'.
add-fieldcat 'ERFMG' 'MSEG' 'Adet'.
endform.                    " fill_field_cat
     Form fill_sortinfo
form fill_sortinfo.
gt_sortin-up            = 'X'.
gt_sortin-fieldname     = 'MATNR'. append gt_sortin.
endform.                    " fill_sortinfo
     Form top_of_page                                              *
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
    exporting
      i_logo             = 'ZKUTAS'
      it_list_commentary = gt_header[].
endform.                    " top_of_page

HI,
if it is a normal report program then you can directly create a Selection screen field.
After the Type-pool you can use Parameters or Select-options to create the selection screen field..
If it is a Modulpool program then you can create a selection scren field like
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS SUBSCREEN.
PARAMETERS: p1(10) TYPE c.
SELECTION-SCREEN END OF SCREEN 1100.
defines a selection screens 1100 as subscreens.
The next screen number of screen 100 is 100 (statically-defined).
PROCESS BEFORE OUTPUT.
MODULE status_0100.
CALL SUBSCREEN area INCLUDING sy-repid number.
PROCESS AFTER INPUT.
MODULE cancel AT EXIT-COMMAND.
CALL SUBSCREEN area.
MODULE user_command_0100.
look at the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/e7/deb237b9a9a968e10000009b38f8cf/content.htm
Regards
Sudheer

Requirement to add new parameter in selection in report painter report

Hi Gurus,
I have a requirement to add an extra field in Cost center:Act/Plan/Comm CC Cur report.This is otherwise a Z report in report painter with 0% code (T-code : GR55-> Report group->Report).But,when we go to technical information of this report,it has four standard sap programs,which contains code for this selection screen.It does not even have a modification scope.
Selection screen of this report contains following parameters:
Selection values:
Controlling Ar
Fiscal Year
From Period
To Period
Plan Version
Selection Groups:
Cost Center Group
Or value(s)
Cost Element Group
Or value(s)
My requirement is to add one more parameter : Purchase oeder in new block:
Is there any way to achieve it.
Note: Copying the standard progs into custom prog is not working,i already tried that.
Please let me know your suggestions,if any one of you came across such requirement before.it is very impoertant for me.
Thanks in advance,
Meenakshi

Hi,
This report (and all generic reports which are based on the same library) looks on CCSS structure. This structure extracts data from totals tables. Therefore, it's not possible to add the parameter of purchase order, as it's a detail line attribute.
Regards,
Eli

QM01 - Add new fields under SUBJECTS tab for notification type Q2

Hi Experts,
My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
I followed the following steps to achieve this :
[ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
Now I arrived on the screen where we have to define the custom screen area and screen number.
But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
Please refer to below screen shot for better understanding :
Please help ! Thanks in advance.
Kind Regards,
Ashish Goyal

Dear narendra bora
You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split.
But it is not possible to enter two users in reported by field.
I hope this will resolve your issue.
Regards

Add new field as selection parameter in HUMO report

Dear Experts,
We have arequirement to add a new selection criteria in a standard report HUMO.
We need to add a new filtering field from VEPO table.
How can we do this without going for development.
Please suggest
Regards,
Shashidhar

Hi Sashidhar,
First go to the program RHU_HELP and you need to enhance the code using the enhancement technique using implicit enhancement. You can add your new selection criteria at line no 257( need to create an new implicit enhancement).
Hope this is helpful for you.
Regards,
Ramesh.

Add new variable in Selection ID for planning book

Similar Messages

Maybe you are looking for