Add OMS service error

add another service to exist OMS, showing error msg "OMS version 10.2.0.1.0 does not match with repository version 10.2.0.4."

Use the Following WorkAround.
We can install Additional OMS with the following workaround, if the
Repository is already upgraded to 10.2.0.4.0.
1)Downgrade the repository version to 10.2.0.1.0 from 10.2.0.4.0.(use the
following sql:
UPDATE sysman.mgmt_versions SET version = '10.2.0.1.0' where
component_name='CORE';
commit; )
2) provide the repository credentials for the Specify Database Configuration
Screen (fourth screen) , click next.
3) Update the repository version to 10.2.0.4.0 (use the following sql: UPDATE
sysman.mgmt_versions SET version = '10.2.0.4.0' where
component_name='CORE';
commit; )
4) proceed Installation.
Edited by: mnazim on Oct 22, 2008 12:26 AM

Similar Messages

Add domain service error

encouter an error when trying to add a domain service class with a data context Linq To Sql, shows "Domain Service Class void".

Hi,
Please check if you have build solution after creating the Entity Data Model.
Double click your .edmx file,It will open the model brwoser.
Right click your model and do update model from database.
Then compile your solution and then try to add your domain service.
Please check link below could give you some help:
http://social.msdn.microsoft.com/Forums/silverlight/en-US/3ee03aad-d64a-4ee6-8f7b-eab74ba4b622/available-data-context-objectcontexts-drop-down-empty-on-new-domain-service-class
http://social.msdn.microsoft.com/Forums/silverlight/en-US/817328d1-525c-4b2b-a01c-839abd21038a/add-new-domain-service-class-shows-no-entities
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I keep getting this message whenever I click on the "Find Updates" tab in Tools/Add-ons: "Plugin Finding Service Error. We've encountered an error. Please try your request again later. Retry."

I have updated Firefox to 3.6.16, and Flash Player to the new 10.2.153.1, and all the other "extensions" and "add-ons" work just fine. I can't figure out what the problem is except to say that, I have not been able to "update" the "plugins" in Firefox.
Every day I have been trying to see if there is any change, but each time the message box reads the same: "Plugin Finding Service Error...." etc, as stated in the "Question" above.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
You can check the permissions for all sites on the about:permissions page, via the location bar.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Error: 0x80073701 when trying to add Print Services Role in Windows 2012 Standard

Hello,
I'm getting an error when trying to add Print Services role in Windows 2012 Standard. I'm getting the same error whether I use the GUI or from PowerShell.
This is a new server install.
The PowerShell error follows:
add-windowsfeature : The request to add or remove features on the specified server failed.
Installation of one or more roles, role services, or features failed.
The referenced assembly could not be found. Error: 0x80073701
At line:1 char:1
+ add-windowsfeature print-services
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (@{Vhd=; Credent...Name=localhost}:PSObject) [Install-WindowsFeature],
    Exception
    + FullyQualifiedErrorId : DISMAPI_Error__Failed_To_Enable_Updates,Microsoft.Windows.ServerManager.Commands.AddWind
   owsFeatureCommand
Success Restart Needed Exit Code      Feature Result
False   No             Failed         {}
Any help with this issue will be greatly appreciated.

Hi,
I think you should start with chkdsk C: /F and sfc /scannow.
Regards.
Vivian Wang

Start/stop the OMS Services on Same Host

Hi,
I have OMS, Repository database and Agent on the same host.....
I want to stop and start the services...
==========================
FOR Shutdown
=====================================
Stop the Agent
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
stop the OMS Services
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopall
Stop the Repository Databas Listner
$cd $ORACLE_HOME/bin/lsnrctl stop LISTENER
STOP THE database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> shutdown immediate
====================================
FOR Startup
=====================================
start the Repository Listener
$cd $ORACLE_HOME/bin/lsnrctl start LISTENER
start the Database
$cd $ORACLE_HOME/bin/sqlplus '/as sysdba'
sql> startup
start the OMS Service
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl startall
start the Management Agent
$cd $ORACLE_HOME/agent10g/bin/emctl start agent
======================================
is this the correct procedure...
can anybody help in this regard....

As an outline, it looks ok I think.
You may need some env variables set up in the script, add some error handling, etc...
I want to stop and start the services...
$cd $ORACLE_HOME/agent10g/bin/emctl stop agent
$cd $ORACLE_HOME/oms10g/opmn/bin/opmnctl stopallRemove the "cd" from your command lines.

Reporting Services Error after Interactive sorting and drill down in pps

Hi
i have a report that has a drill down option that shows all workgroups within a specific parent group and an interactive sorting ass well on both columns parent group & workgroup
This is displayed in pps combined with a SharePoint
---the problem is that after sorting the parent group column by name i then press the drill through icon (+) next to it hopping to see all workgroups related to each parent group
- but instead
i receive this Reporting Services Error :
The value for parameter 'SortItem' is not specified. It is either missing from the function call, or it is set to null. (rsMissingParameter) Get
Online Help
If I don't press the sorting and just drill through it works fine. the sorting itself also works fine.
any suggestions ?

Hi Hyaron,
I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
from the Grouping Pane in the Report Designer.
How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
Hope this helps.
Regards,
Mike Yin
TechNet Community Support

Error when starting Netscape Calendar Server: Module: , Label: 355, Service error: #0x13209

When starting Netscape Calendar Server, the following error message appears:
 
Module: , Label: 355, Service error: #0x13209

The three ACIs listed below need to be present in the Directory Server in order
for Calendar server to work properly. Check the properties on the Base DN to
verify that the following ACIs exist. If they are not present, you will need
to add them, and the Base DN will need to be modified for your enviroment.

<OL>
<LI>ACI for allowing users to modify their own entries. 

(targetattr = "*")(version 3.0; acl "Allow self entry modification";
allow (write)userdn = "ldap:///self";) 

<LI>ACI for allowing anyone permissions to Read, Search, and Compare. 

(target="ldap:///o=basedn.com") (targetattr != "userPassword") (version
3.0; acl "Anonymous access";
allow (read, search, compare) userdn = "ldap:///anyone";) 

<LI>ACI for allowing Calendar Server admins Write access to the Base DN
(this is necessary in order for admins to add users and resources to the node).
 
(target="ldap:///o=basedn.com") (targetattr = "*") (version 3.0; acl
"Calendar Administrators Group"; 
allow(all) groupdn = "ldap:///cn=Calendar Server Admins,ou=Netscape
Servers,o=basedn.com";) 
</OL>

Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana

Benefits Service - Error occurred during currency conversion from to USD

I am attempting to run the add beneficiaries service in employee self servie and receive the following error message "Error occurred during currency conversion from blank to USD
Has anyone come across this error before?

Both are set up properly. This error only happens on some US teammate records. It seems to occur after we do a refresh of our QA environment from our produciton environment

Suddenly, I can't get the plugin scan page to open. I keep getting "Plugin Finding Service Error", no matter how many times I try, or wait. When I first opened it yesterday, it was scanning, then it disappeared and I got the error message.

I have opened the plugin scanning page many times before, and have done some updating of plugins recently, but yesterday I couldn't bring up the scan, I keep getting "Plugin Finding Service Error", which says to "try again later". I believe what I updated most recently was Flash (I think). No matter how many times I push the "try again", or shut down Firefox and the webpage, I still get the error, and get nowhere!

This problem has been occurring for the past two months. I have updated Firefox to version 3.6.16...including Flash Player to version 10.2.153.1 as instructed. I am able to click on the "Add-ons" tab and "find updates" for "Get Add-ons" and "Extensions." However, the "find updates" tab is not working for "Plugins."
I followed one of your suggestions in your "troubleshooting plugins" topic (disabling the plugins...then enabling them after a check). That didn't work either. In fact, a message box would appear saying that Firefox has "disabled Flash" instead, which of course it did not, since I was able to confirm that the Flash Player update version was still intact. Unfortunately, it appears that updating the Flash Player through Firefox is not a standalone operation. Apparently it will not work properly unless a separate update is subsequently processed through Internet Explorer as well.

Sdo web service errors

Hi,
I try to use a sdo webservice in an other project but this fails. I created a sdo webservice by creating a service interface in a bc4j application module. this works fine I can deploy
it to a oc4j container and test the web service operation findbykey, this works fine.
Now I made in an other model project a new entity based on this sdo service , this goes well. I add the reference to the connection.xml and add the sdo service common jar to this project library.
If I test this with the bc4j tester then it goes wrong because of the selected configuration.
If I make a jsf page on this viewobject then I get this error
WARNING: ADFc: Unexpected exception caught: javax.naming.NameNotFoundException, msg=nl.ordina.hr.model.service.common.CustomerServiceBean not found
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: javax.naming.NameNotFoundException, msg=nl.ordina.hr.model.service.common.CustomerServiceBean not found
 at oracle.jbo.service.errors.ServiceExceptionHelper.extractJboException(ServiceExceptionHelper.java:251)
 at oracle.jbo.service.errors.ServiceExceptionHelper.extractJboException(ServiceExceptionHelper.java:238)
 at oracle.jbo.datasource.svc.SIVODataSourceImpl.constructJboException(SIVODataSourceImpl.java:150)
 at oracle.jbo.datasource.svc.SIVODataSourceImpl.retrieveData(SIVODataSourceImpl.java:104)
 at oracle.jbo.server.DSViewObjectImpl.executeQueryForCollection(DSViewObjectImpl.java:123)
 at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:921)
If I start the the sdo webservice in the embedded oc4j I get this error
25-dec-2007 1:24:06 com.evermind.server.ejb.logging.EJBMessages logException
SEVERE: [current-workspace-app] An error occured deploying EJB module: javax.ejb.EJBException: nl_ordina_hr_model_service_common_CustomerServiceBean_RemoteProxy_40f7e5o.<init>(com.evermind.server.ejb.StatelessSessionEJBHome); nested exception is: java.lang.NoSuchMethodException: nl_ordina_hr_model_service_common_CustomerServiceBean_RemoteProxy_40f7e5o.<init>(com.evermind.server.ejb.StatelessSessionEJBHome)
javax.ejb.EJBException: nl_ordina_hr_model_service_common_CustomerServiceBean_RemoteProxy_40f7e5o.<init>(com.evermind.server.ejb.StatelessSessionEJBHome); nested exception is: java.lang.NoSuchMethodException: nl_ordina_hr_model_service_common_CustomerServiceBean_RemoteProxy_40f7e5o.<init>(com.evermind.server.ejb.StatelessSessionEJBHome)
java.lang.NoSuchMethodException: nl_ordina_hr_model_service_common_CustomerServiceBean_RemoteProxy_40f7e5o.<init>(com.evermind.server.ejb.StatelessSessionEJBHome)
 at java.lang.Class.getConstructor0(Class.java:2678)
 at java.lang.Class.getConstructor(Class.java:1629)
 at com.evermind.server.ejb.StatelessSessionDefaultRemoteHomeImpl.createSingletonInstance(StatelessSessionDefaultRemoteHomeImpl.java:47)
 at com.evermind.server.ejb.StatelessSessionEJBHome.getSingletonInstance(StatelessSessionEJBHome.java:25)
 at com.evermind.server.ejb.StatelessSessionBeanPool.createContextImpl(StatelessSessionBeanPool.java:38)
 at com.evermind.server.ejb.BeanPool.createContext(BeanPool.java:426)
Here some code
@javax.ejb.Stateless(name="nl.ordina.hr.model.service.common.CustomerServiceBean")
@javax.ejb.Remote(CustomerService.class)
@javax.jws.WebService(targetNamespace="/nl/ordina/hr/model/service/common/",
serviceName="CustomerService", portName="CustomerServiceSoapHttpPort",
endpointInterface="nl.ordina.hr.model.service.common.serviceinterface.CustomerService")
@oracle.j2ee.annotation.ejb.StatelessDeployment(copyByValue=false,
minInstances=2)
public class CustomerServiceImpl extends ServiceImpl implements CustomerService {
private static boolean _isInited = false;
What goes wrong

I solved the embedded oc4j container error , this was a library loading problem the jax-ws web service had to loaded first.
The other problems remains

I cannot start my OMS service on Windows 2000

I tried starting Oracle8i OMS Service on Windows 2000. I cannot
start it automatically so I started it manually. But Irecieved
an error message saying No application Error, some configuration
error with the Operating System.
On searching forums for DBAs i recieved a solution to manually
start by command 'oemctrl start OMS'. It did not help either as
the resources.ora file was not present at the location
C:\Oracle\admin\orb\resources.ora .
I found a resources.ora at location c:\oracle\ora81
\orb\admin\resources.ora but this file is empty.
NOW Wwith the command 'oemctrl start OMS' I am getting the
following error msg. Please send me the answer if possible at
[email protected]. WHERE Can I find the content for
resources.ora??
C:\Documents and Settings\Administrator>oemctrl start OMS
OEMCTRL for Windows NT: Version 2.1.0.1.0
Copyright (c) 1998, 1999 Oracle Corporation. All rights
reserved.
Starting the Oracle Management Server... [main][2001-11-
10:12:28:10:630] VdbSess
ion.processError: errorCode >1017<
[main][2001-11-10:12:28:10:710] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:10:830] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:10:970] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:11:381] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:11:421] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:11:541] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:11:691] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:102] VdbSession.processError:
errorCode >1017<
[main][2001-11-10:12:28:12:142] VdbSession.processError:
errorMsg >ORA-01017: i
nvalid username/password; logon denied
<
[main][2001-11-10:12:28:12:262] ORA-01017: invalid
username/password; logon den
ied
: ..../....@jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=
(PROTOCOL=TCP)(Host=linux)(P
ort=1521))(CONNECT_DATA=(SID=oradb)))
[main][2001-11-10:12:28:12:413] VdbSession.processError:
invalid connect string
[main][2001-11-10:12:28:12:493]
Error starting Oracle Management Server.

I got the same problem.

"Service Error" Is there a fix?

I think if i get the ipod updater to work than maybe iTunes 5 will work with my ipod, but i cant get that thing to work. I have a ipod w/ click wheel and i realllly want to update it.
Ive tryed everything about reinstalling and stuff, but nothing has worked.
I wish apple could figure this out and come out with a new version for windows users.. arg..
thanks

I've been venting about this problem for days... 9 now, in fact. I have the same error messages too (software not communicating, and updater service error)
None of Apple's instructions help. Considering they were written beore 5.0 came out... I wasn't that optimistic.
http://docs.info.apple.com/article.html?artnum=93716
I was going to re-install 4.9 (which is a bit of a challenge because you have to save your music and rename it, etc)
But I think I'm going to try and sit "patiently" for the 5.0 fix to come out. When? I don't know. But I've wasted many many hours sitting here pulling my hair out.
My iTunes 5.0 is playing music off my PC, my iPod works and I can charge it elsewhere. Just can't sync/add new music with this latest 5.0/disaster. I haven't had any Windows crashes - so I don't want to risk playing around again.
That's my only advice.
This is the post to go back to 4.9
James Bond 007, "Mark Jones - step by step help to get 4.9 back!" #3, 09:43pm Sep 15, 2005 CDT

79 Service Error Message on the LaserJet Pro 200 color M251 Series printer

I've been using this printer with the Mac OSX 10.9.4 OS for about 9 months.
I'm now getting a 79 Service Error message. I've tried to turn the printer Off and On several times to no avail.
Strangely enough, when I try to print a new document, a message keeps appearing on my computer, that says "The printer has been paused. Do you want to resume printing?" When I click the Resume button, nothing prints out.
The user manual says that the 79 Service error message is linked to a firmware problem? Do you know how I can fix this issue?
Many thanks,
Pierre
This question was solved.
View Solution.

Hi NebraskaPierre,
I see by your post that you are getting a Service 79 error on the printer. I can help you.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
This can be caused by malformed PostScript documents.
Please do the following:
Locate the on/off switch on the bottom of the printer.
Switch the printer off position and COUNT to 10.
Turn the printer on again and the system should be all set.
Try printing from another application to see if you have the same issue.
If a print job of yours repeatedly causes this error, it may indicate a problem with the print job.
Try breaking your document up smaller before printing it.
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer.
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon ( ), and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign, then select the printer from the list and click on the Add button.
(make sure it shows the printer name beside Use, not the Airprint driver)
Try printing again.
I would recommend to run a firmware update on the printer if the issue continues.
There are none on the website for the 10.9, but you can run the updates right from the printer.
Go to setup, services, Laserjet Update, Check for Updates now.
What are you trying to print and from what application are you using? (PDF)
Please provide in detail the results if you are still having issues.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

OMS Service on GC 10.1

Hello,
I just realized that on my Grid Control server (Release 1 on Windows), there is no service for Oracle Management service. This is just weird...Can someone confirm?
Normally, when we reboot the server, we just let Windows take care of it so all has been running fine. However, I want to script the stop of the different services one by one.
1. Stop OMS - emctl stop oms: I got an error here about EM Configuration issue. That's when I realised there is no such OMS service. Can someone check on Windows if they have this service?
However, in GC, i can see my OMS running fine:)
Cheers,
Rodney

OK figured it out...the doco had it all:P
The services are as follows:
- Application Server Control Oracle<oracle_home>ASControl
For example:
OracleOraHome1ASControl
Use this Service to start and stop the Application Server Control for the Oracle Application Server instance that was installed and configured to deploy the Management Service J2EE application.
- Oracle Process Management and Notification (OPMN) Oracle<oracle_home>ProcessManager
For example:
OracleOraHome1ProcessManager
Use this service to start and stop all the components of the Oracle Application Server instance that was installed and configured to deploy the Management Service J2EE application.
Use this service to start and stop the Management Service and all its related components, including OC4J, Oracle HTTP Server, and OracleAS Web Cache, which by default must be running in order for you to access the Grid Control Console.
Cheers.

Each time I try and find out if my plug-ins are current I get the following message: Plugin Finding Service Error We've encountered an error. Please try your request again later. in English

I clicked on the phrase that said Check on whether your plug-ins are all current and then Firefox started just grinding away.
Finally it came back with "Plugin Finding Service Error We've encountered an error. Please try your request again later."
I get the same message every time I click on the "check on whether plug-ins are updated (attempted checking over
a number of days and still the same problem).

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
You can check the permissions for all sites on the about:permissions page, via the location bar.
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Add OMS service error

Similar Messages

Maybe you are looking for